summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2019-07-30soc/intel/{broad,cannon,sky}: Fix possible out-of-bounds readsJacob Garber
There will be a possible out of bounds array access if power_limit_1_time == ARRAY_SIZE(power_limit_time_sec_to_msr), so prevent that in the index check. This issue was fixed for other cpus in commit 5cfef13f8d (cpu/intel: Fix out-of-bounds read due to off-by-one in condition). Based on the discussion for that commit, also remove the magic constant 28 in favour of the index of the last array element. Change-Id: Ic3f8735b23a368f8a9395757bd52c2c40088afa1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229673 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-29Revert "soc/intel/common: Set controller state to active in uart init"Christian Walter
This reverts commit 46445155ea21b0aa9106e12a00b9b1d89887a461. Reason for revert: Breaks coreboot. Either no UART working or the complete boot process stops. Platform: Intel Apollolake, tested on Up Squared Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-29soc/intel/baytrail: Prevent unintended sign extensionsJacob Garber
Consider the following assignment: u64 = s32 For positive values this is fine, but if the s32 is negative, it will be sign-extended in the conversion to a very large unsigned integer. This manifests itself in two ways in the following code: First, gpu_pipe{a,b}_port_select are defined as int, and can have the values 1 or 2. In the case when they have the value 2, the shift 2 << 30 will be a negative number, making it susceptible to the sign-extension problem above. Change these variables to something more reasonable like a uint8_t, which is unsigned. Second, in any bit shift, any variable with width less than an int will be implicitly promoted to an int before performing the bit shift. For example, the variable gpu_pipea_power_on_delay is a uint16_t, and if its highest bit is set, the shift gpu_pipea_power_on_delay << 16 will become negative, again introducing the above problem. To prevent this, cast all smaller variables to a u32 before the shift, which will prevent the implicit promotions and sign extensions. Change-Id: Ic5db6001504cefb501dee199590a0e961a15771b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229699, 1229700, 1229701, 1229702 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34487 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29soc/intel/cannonlake: Correct the data type of serial_io_devAamir Bohra
Change-Id: Id974a4bb84b7d5caddece04f93bf4e830d15b576 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34466 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26soc/intel/baytrail/Makefile.inc: Sort entriesAngel Pons
Change-Id: Ic35a901c8272928a0389b38a74f4eac74977a080 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel/fsp_broadwell_de: Fix use of config_of()Kyösti Mälkki
Change-Id: I96d423720fbe67c067373436ad250edf37939e99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel: Guard remaining SA_DEV_ROOT definitionKyösti Mälkki
Prevent implicit cast to pointers. The compiler doesn't warn about the conversion from integer to pointer without a cast, because SA_DEV_ROOT is literally '0' and there seems to be an exception for that conversion. Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-25soc/intel/broadwell: Fix case of SA_DEV_ROOTKyösti Mälkki
Commit 71756c2 soc/intel: Expand SA_DEV_ROOT for ramstage removed SA_DEV_ROOT expanding to device pointer. We missed the case here, use __SIMPLE_DEVICE__ instead for the file. Change-Id: I4331298837afa3b8c8321da610f99f8f5fa54737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-25soc/intel/cannonlake: Split the "internal PME" wake-up into more detailPaul Fagerburg
The "internal PME" wake-up source could be from integrated LAN, HD audio/audio DSP, SATA, XHCI, CNVi, or an ME maskable host wake. chromium:1680839 adds USB port details to the wake-up when the XHCI causes the wake-up. Expand the logging for wake-up details to identify and log the other wake-up sources with more details. Note that wake on Integrated LAN (GbE), SATA, and ME Maskable Host Wake are not in use on Hatch, so these will not be tested. BUG=b:128936450 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Program image-hatch.serial.bin into the DUT using flashrom. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). XHCI USB 2.0 * Plug a USB keyboard into a USB-A port * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Press a key on the USB keyboard * ``mosys eventlog list`` shows: 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 CNVi (connected to Wi-Fi): * Enable wake on disconnect via ``iw phy0 wowlan enable disconnect`` * Set up a hotspot on an Android phone * Connect the Chromebook to th hotspot * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Turn off the hotspot on the phone * ``mosys eventlog list`` shows: 8 | 2019-07-11 10:58:17 | S0ix Enter 9 | 2019-07-11 10:59:17 | S0ix Exit 10 | 2019-07-11 10:59:17 | Wake Source | PME - WIFI | 0 11 | 2019-07-11 10:59:17 | Wake Source | GPE # | 109 XHCI USB 3.0 * TBD HD Audio * TBD Change-Id: I2c71f6a56b4e1658a7427f67fa78af773b97ec7f Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34289 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25soc/intel/icelake: Add ENABLE_DISPLAY_OVER_EXT_PCIE_GFX kconfigSubrata Banik
This patch creates new kconfig option to bring display over external PCI based GFX card. This kconfig to select required kconfig which are not default selected by VGA_ROM_RUN to launch legacy oprom from pci based GFX card. Change-Id: I8ebde69e38defbe3321eb5e5bbd632c209ae2cd8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-07-24soc/intel/common: Set controller state to active in GSPI initMeera Ravindranath
Set the controller state to D0 during the GSPI sequence,this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during GSPI controller enumeration sequence for CML and ICL platforms. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-07-24soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument struct device *dev has been added to uart_lpss_init function for the same. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML and ICL platforms. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22soc/intel/broadwell: Change variable back to u32Jacob Garber
commit bde6d309df (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer) accidentally changed the type of reg32 to a u8 *, so change it back to a u32. Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Change file to __SIMPLE_DEVICE__Kyösti Mälkki
All the PCI accesses in the file are now accessed without SA_DEV_ROOT expanding to function call. Change-Id: I30d331e9c18a486ea971e8397a6e20a0f82d5f84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Fix chip_info for PCH_DEV_PMCKyösti Mälkki
Since PCH_DEVFN_PMC device is a PCI device that may be hidden from enumeration, use SA_DEVFN_ROOT instead to locate the SOC configuration. Change-Id: I4b5195827fb32ec1dbd0bd6c9e243f4f9a4775ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: gpio_defs: set trig to disable in PAD_CFG_GPO*Maxim Polyakov
According to the documentation [1], by default the RX Level/Edge Trig Configuration set to disable (2h = Drive '0') for each pad. Since this setting doesn't matter for the GPO pad, there is no need to change the default value for such pads. The patch updates PAD_CFG_GPO* macros to set trig to disable. It also resolves some problems of creating the PCH/SoC pads configuration based on information from the inteltool dump [2,3] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/34337 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: add PAD_CFG_NF_BUF_TRIG macroMaxim Polyakov
In the case there is no the circuit diagram for motherboard, the PCH/SoC GPIOs config is based on information from the inteltool dump. However, available macros from gpio_defs.h can't define the pad configuration from this dump: 0x0440: 0x0000002084000500 GPP_A8 CLKRUN# 0x0448: 0x0000102184000600 GPP_A9 CLKOUT_LPC0 0x0450: 0x0000102284000600 GPP_A10 CLKOUT_LPC1 To convert these raw DW0/DW1 register values to macros, the following parameters must be set: func - pad function, pull - termination, rst - pad reset config, trig - rx level/edge configuration, bufdis - rx/tx (in/output) buffer disable. The patch resolves the above problem by adding a new macro for the native function configuration: PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) These changes were tested on Asrock H110M-DVS motherboard [2]. It also resolves the problem of automatically creating pads configuration [3,4] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/33565 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 [4] https://github.com/maxpoliak/pch-pads-parser/commit/215d303 Change-Id: If9fe50ff9a680633db6228564345200c0e1ee3ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21soc/intel/skylake: Enable Energy/Performance Bias controlMatthew Garrett
Bit 18 of MSR_POWER_CTL is documented as reserved, but we're setting it on Haswell in order to enable EPB. It seems to work on SKL/KBL as well, so do it there too. Signed-off-by: Matthew Garrett <mjg59@google.com> Change-Id: I83da1a57a04dac206cc67f2c256d0c102965abc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-19soc/intel/common/block/xhci: Add API to disable USB devicesKarthikeyan Ramasubramanian
Add API to disable USB devices that are not present but are configured in the device tree either after probing the concerned port status or as explicitly configured by the variants. BUG=None BRANCH=octopus TEST=Boot to ChromeOS. Change-Id: Ied12faabee1b8c096f2b27de89ab42ee8be5d94d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33377 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19soc/intel/common: Add SOC specific function to get XHCI USB infoKarthikeyan Ramasubramanian
It feels appropriate to define SoC specific XHCI USB info in SoC specific XHCI source file and an API to get that information instead of defining it in elog source file. This will help in other situations where the information is required. BUG=None BRANCH=None TEST=Boot to ChromeOS. Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18soc/intel: Use config_of()Kyösti Mälkki
Change-Id: I0727a6b327410197cf32f598d1312737744386b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian
2019-07-18soc/intel: Fix invalid use of 'static'Kyösti Mälkki
Just keep the variables on the stack. Change-Id: I36b29d8fb7dac159b29609033cba450bea9adf77 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18soc/intel: Use config_of_path(SA_DEVFN_ROOT)Kyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I53324603c9ece1334c6e09d51338084166f7a585 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17soc/intel/cannonlake: Add device Ids for new CFL SKUs supportLean Sheng Tan
- Add CPU, MCH & IGD IDs for new Coffeelake SKUs - Add PCH, LPC, SPI IDs for CNP-H PCH CM246 & C246 - Make some minor alignments & naming corrections to align with the rest TEST= build, boot to both Linux & windows OS on CFL H & S platforms and verified all the device Id's in serial console logs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I343b11ea8d9c33eb189d7478511a473b145f4ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-17soc/intel: Fix regression with hidden PCI devicesKyösti Mälkki
Fix regression with commit 903b40a soc/intel: Replace uses of dev_find_slot() Platforms where FSP hides PCI devices before enumeration may halt with error message 'PCI: dev is NULL!'. The workaround here is to print an error message revealing the faulty source code function and revert to old behaviour of dev_find_slot(). Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17intel/fsp_baytrail: Avoid preprocessor with HAVE_SMI_HANDLERKyösti Mälkki
The code should probably set SCI routing if built with HAVE_SMI_HANDLER=n. Change-Id: I0ada4b2a16490a15d8036a9425c4f768f7b8f218 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-16soc/intel/{cnl,icl}: Always use CAR NEM enhanced by defaultAngel Pons
The FSP_CAR option has additional configuration options whose default values result in boot failures. Since default values should always boot, default to the open-source CAR NEM Enhanced implementation instead. This also allows us to get rid of an unnecessary vendor-specific special case. Change-Id: I30b1808f91701c07dce6f1de08c213150e8a675a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34287 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16soc/intel/common/block/i2c: Set controller state to active in i2c initAamir Bohra
Set the controller state to D0 during the i2c init sequence, this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during I2C controller enumeration sequence Change-Id: I247ede44b8d1d6871e3e813b63f99a7f6398dd72 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34273 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16soc/intel/common/block/lpss: Add provision to set controller power stateAamir Bohra
Add function to set the power state of a LPSS controller. The API implemented can be used to enforce controllers in active state(D0) during initialization. BUG=b:135941367 Change-Id: I7540924885350de64caff91d920d6cc234154616 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-15intel/cannonlake: Fix indentationKyösti Mälkki
Change-Id: Ia3ec5fbdbbf2712fe314909e05aab1b135534630 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-15src: Use '#include <timestamp.h>' when neededElyes HAOUAS
Change-Id: Ic0483982e8115ae99367d08d8ed77b8a316f5405 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-14soc/intel/icelake: Update FSP UPDs if IGD is disable in devicetreeSubrata Banik
This patch sets required FSP UPDs to skip IGD initialziation if devicetree has disable IGD. Change-Id: I34a02bff112f922cabd48c23bc76370892ec62d9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33739 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-14soc/intel/icelake: Make use of PCH_DEVFN_HDA macroSubrata Banik
Change-Id: I3be530072a6981760e9fe31e43741b4b480d045e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-13soc/intel/cannonlake: Remove unused header files from southbridge.aslAamir Bohra
Change-Id: I1f970db22f87e8eba0129ca049f75d16539644a5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-13soc,southbridge/intel: Avoid preprocessor with HAVE_SMI_HANDLERKyösti Mälkki
Change-Id: Id375999adad71d95d4968398e90bc3c07f65ea83 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34254 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13cpu/x86: Move smm_lock() prototypeKyösti Mälkki
The function implementations are in local platform scopes. Change-Id: I7a3025398b15fe6d2c5a13cdb65f3e62a49c0bc6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34151 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13soc/intel/cnl: Sync CONFIG_LPSS_UART_FOR_CONSOLE with FSPNico Huber
We got rid of the dangerous reconfiguration of arbitrary pads in coreboot, but FSP still overrode that. Make sure that it doesn't enable a UART for debug output when it isn't configured in core- boot. This, again, shows how dangerous it is to leave any FSP UPD at its binary default. Change-Id: I7280a80f71ddddbe78352eb696e6f5844d2df0b2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-12src: Add missing include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Iae73fc1557fb310dacbbf8bc486dc3cc5249d9e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33526 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12soc/intel/common: Add Coffee Lake H 6+2 Xeon graphics idNico Huber
Change-Id: Ibf72a8db2e4292e5d5bb67b8778e1d1ebfa19632 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34164 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12soc/intel/common: Add CM246 LPC device idNico Huber
Change-Id: Ic57ccf48988afbbba256172a7540bb02b88d1bbd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34163 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11soc/intel/cannonlake: Add GPID and CGPM methods to GPIO ASLTim Wawrzynczak
The GPID method returns the PCR Port ID of the given GPIO community. The CGPM method alters the given GPIO community's PM bits, given in Arg1. Change-Id: I098ee08573eb4f8a45d9b5ae84f2d85ce525c9b8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11soc/intel/intelblocks/gpio: Always expose GPIO PM constantsTim Wawrzynczak
These constants are needed in some ASL files, even when __ACPI__ is defined. Change-Id: I0f4f00b93d5d45794b7c9e0f72b51f3191eb3902 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34177 Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11soc/intel/cannonlake: Make EC S0ix notification optional in LPITTim Wawrzynczak
Only call the \_SB.PCI0.LPCB.EC0.S0IX method if it exists. Change-Id: Idf465f8ad7cb016f3ad3d9710b46e35f66f8939b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-11soc/intel/common: Check bios_size and window_size after MIN operationJohn Zhao
Clang Static Analyzer version 8.0.0 detects that the result of log2_ceil(bios_size) and log2_ceil(window_size) is undefined if the value of bios_size and window_size are negative. Add negative value Check for bios_size and window_size after MIN operation. Change-Id: I28577b6e0ba0ab45bb7804c17ba1f26c4b078b15 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-11soc/intel/common/timer: Move USE_LEGACY_8254_TIMER into common/block/timerSubrata Banik
This patch moves USE_LEGACY_8254_TIMER Kconfig into common/block/timer for better code sharing. Also ported CB:33512 for SPT and ICP PCH. Change-Id: Ic767ff97aaa3eb7fa35ffa38fa416d006eaa6e78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-10soc/intel/block/cpu: remove unused USE_COREBOOT_NATIVE_MP_INITArthur Heymans
Only CONFIG_USE_INTEL_FSP_MP_INIT makes a difference whether native MP init is used or not. Also make USE_INTEL_FSP_MP_INIT mutually exclusive with USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI as this option requires coreboot to set up AP and publish PPI based on it. Change-Id: I65b80805d3cd7b66f8c9f878d3c741b98f24288d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33357 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10soc/intel/braswell/acpi/lpc.asl: Allocate used ROM size onlyFrans Hendriks
Fixed ROM area is allocated. Reduce the ROM size using CONFIG_COREBOOT_ROMSIZE. BUG=N/A TEST=Facebook FBG-1701 booting Embedded Linux Change-Id: I7a47bf2600f546271c5a65641d29f868ff2748bf Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-10soc/intel: Drop some HAVE_SMI_HANDLER guardsKyösti Mälkki
The necessary conditionals are evaluated within cpu/x86/Makefile.inc and there are no default targets added unconditionally to build. Change-Id: I694cccf6779551445b83659838749dff02aedece Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-10soc/intel: Remove invalid smm_relocate stubsKyösti Mälkki
Remove the per-platform empty stubs, builds would just fail as there is no equivalent conditional for the smmrelocate.c file. Change-Id: Ie11f307b7bc5415bfdba6a2c66aed01b70d9f0e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-09arch/x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Change-Id: Id56139a3d0840684b13179821a77bc8ae28e05ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09cpu/x86: Flip SMM_TSEG defaultKyösti Mälkki
This is only a qualifier between TSEG and ASEG. Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09drivers/intel: Move FSP stage_cache implementation into common blockSubrata Banik
Change-Id: Iebb6d698c236a95162b3c7eb07987483a293b50a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-09soc/intel/icelake: Refer to soc/soc_chip.h rather than chip.hSubrata Banik
Change-Id: I9e3b5126173e7cec8f2809a38b92c82c9ed5327d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34085 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08intel/fsp_baytrail: Move TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: Ib61ea29724401146eb6f008374cdf599f418e81f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-07soc/intel/icelake: Remove redundant gpio.c from Makefile.incSubrata Banik
Change-Id: Ibddc2363e9bfea9ae41e4807435acb2e788dcb93 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-07soc/intel/{cannonlake,icelake}: Do not define PCH_DEV_PMC in ramstageFurquan Shaikh
This change intentionally removes the definition of PCH_DEV_PMC from ramstage to avoid silent errors. This device gets hidden from PCI bus in FSP-S and hence dropped from the root bus by the resource allocator. In order to avoid incorrect references to the device, avoid defining it in ramstage where it known to return NULL. BUG=b:136861224 Change-Id: I4f69470ec80c7127a2b604ed2b1f794f5a63e126 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34120 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07soc/intel/icelake: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: I861bb132acf113c9d306175b670bf4a1ff742c28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/icelake: Use SA_DEV_ROOT instead of PCH_DEV_PMCFurquan Shaikh
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets removed from the root bus as leftover unused device. With change 903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses of dev_find_slot() were replaced by pcidev_path_on_root() which relies on scanning of root bus to find the requested device. Since PMC device is removed from the root bus, pcidev_path_on_root() returns NULL for it thus resulting in configuration being skipped for the PMC ultimately resulting in S3 failures. Since the PCH_DEV_PMC was just used to get to chip config, this change replaces the use of PCH_DEV_PMC with SA_DEV_ROOT. BUG=b:136861224 Change-Id: Id68db8382b7b98e8e2e4a65ded1a6fb3bd057051 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-07soc/intel/cannonlake: Use SA_DEV_ROOT instead of PCH_DEV_PMCFurquan Shaikh
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets removed from the root bus as leftover unused device. With change 903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses of dev_find_slot() were replaced by pcidev_path_on_root() which relies on scanning of root bus to find the requested device. Since PMC device is removed from the root bus, pcidev_path_on_root() returns NULL for it thus resulting in configuration being skipped for the PMC ultimately resulting in S3 failures. Since the PCH_DEV_PMC was just used to get to chip config, this change replaces the use of PCH_DEV_PMC with SA_DEV_ROOT. BUG=b:136861224 TEST=Verified that S3 works fine on hatch. Change-Id: Ie5ade00ac2aca697608f1bdea9764b71c26e2112 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-06soc/intel/icelake: Fix outb orderLijian Zhao
Similar to CB:33940, fix outb orders. Change-Id: I1d35235abc7e02e6058f07809b738635861cc9e4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jackpot51@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-06soc/intel/cannonlake: Fix outb orderJeremy Soller
outb accepts a value followed by a port Change-Id: I6fe3961b4f8cb2454e3b2564c3eae6af06c9e69d Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33940 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-06soc/intel/cannonlake: Override PRERAM_CBMEM_CONSOLE_SIZE default valueSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. TEST=Verified on Hatch CML platform. Change-Id: I2de4ca2f2001b304850c27df1b3c3b2c827fe25a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Spoorthi K Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-06soc/intel/common/block/sata: Convert DWORD width Read/Write to BYTE widthSubrata Banik
As per EDS Sata port implemented register is byte width (bits[3:0]) hence converting required DWORD based read/write to BYTE width read/write. TEST=Able to boot from SATA device on CML hatch. Change-Id: I545b823318bae461137d41a4490117eba7c87330 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-05soc/intel/cannonlake: Fix PMC and GPIO block values for PCH-HJeremy Soller
Some of the values used for GPIO_CFG and MISCCFG were not correct, causing GPEs to not work correctly. This adjusts them according to the values found in the original ACPI tables for the System76 Gazelle. Unfortunately, the Intel documentation[1] mentioned below is also incorrect. I have mentioned this to Intel already. The source for the Intel CoffeeLake FSP also confirms these new numbers. This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for its GPE and GPP_K6 is used for the lid switch GPE. Both function correctly after applying this change. [1] Intel Document #572235: Intel ® 300 Series Chipset Families Platform Controller Hub External Design Specification (EDS) - Volume 2 of 2 Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-04soc/intel/common: Increase SMM_MODULE_STACK_SIZE to 0x800Kane Chen
While running the s0ix cycling test, we observed SMM Handler caused a stack overflow. This error happens during event log access. This change is to increase the SMM_MODULE_STACK size to 0x800 BUG=b:135551854 TEST=suspend_resume test pass 500+ cycles, originally issue happenes within 150 cycle Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-04soc/intel: Replace uses of dev_find_slot()Kyösti Mälkki
To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-04Revert "soc/intel/skylake/romstage: Increase size of postcar stack"Kyösti Mälkki
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b. It was merged prematurely with some vague argumentation in the commit message and not all issues of reviewers were addressed. Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-03soc/intel/skylake: Add Kabylake-R microcode update filesArthur Heymans
This also corrects some CPU naming in comments. Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02src: Use CRx_TYPE type for CRxElyes HAOUAS
Change-Id: If50d9218119d5446d0ce98b8a9297b23bae65c72 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33816 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02soc/intel/cannonlake: Add support to log XHCI wake eventsPaul Fagerburg
Enhance elog wake source information with more details about which USB port resulted in a wake from S3 or S0ix. BUG=b:123429132 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Plug a keyboard into a USB port on the DUT. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). On the console, run ``powerd_dbus_suspend``. Wait for the DUT to enter low power mode. Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. Press a key on the USB keyboard. The DUT wakes up. On the console, run ``mosys eventlog list`` and look for the wake source. 156 | 2019-06-26 09:46:07 | S0ix Enter 157 | 2019-06-26 12:14:05 | S0ix Exit 158 | 2019-06-26 12:14:05 | Wake Source | Internal PME | 0 159 | 2019-06-26 12:14:05 | Wake Source | GPE # | 109 Program image-hatch.serial.bin into the DUT using flashrom. Repeat the ``powerd_dbus_suspend``, ``powerinfo``, ``mosys eventlog list`` sequence. 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 Change-Id: Ie9ef870e219733dea9806c766f5351db25689b32 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-02soc/intel/icelake: Disable HDA based on devicetreeSubrata Banik
Change-Id: I28c2beca4bc26ddb896e68886571ebdc82276b48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-01Use 3rdparty/intel-microcodeArthur Heymans
Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28{soc,northbridge}/Kconfig: Remove unused CACHE_MRC_SIZE_KBElyes HAOUAS
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-28soc/intel/cannonlake: fix use of legacy 8254 timerMatt DeVillier
FSP sets the use of the 8254 timer via the Enable8254ClockGating UPD, which defaults to enabled, overriding what is set by coreboot. Per the FSP integration guide, this UPD needs to be disabled when a legacy OS is booted (ie, when SeaBIOS is used as the payload). Add a Kconfig option to set the UPD properly based on payload selection, and remove the existing coreboot code in lpc.c since it is either ineffective or being overridden by FSP. Test: build/boot out-of-tree WHL board with both SeaBIOS and Tianocore, ensure 8254 timer usage set correctly for each. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-26soc/intel/cannonlake/Kconfig: Don't have all variants select ↵Arthur Heymans
SOC_INTEL_CANNONLAKE This allows to use Kconfig options to differentiate between SOC variants. Change-Id: Ica11c68377e3d0dc8a8f48198e01a74d7bebe642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33559 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-25soc/intel/dnv: Fix value of B_PCH_GPIO_RX_SCI_ROUTEPatrick Havelange
The value for that macro should be 1<<19. This is confirmed by the Intel doc and also by N_PCH_GPIO_RX_SCI_ROUTE. See Intel Atom® Processor C3000 Product Family Datasheet (February 2018) : https://www.intel.com/content/www/us/en/products/docs/processors/atom/c-series/c3000-family-datasheet.html Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Change-Id: I808d9131032a9796d837e00ad6fb3369b792e597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33573 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-24cbfstool: Drop update-fit optionPatrick Rudolph
The ifittool is used instead. Drop old code. Change-Id: I70fec5fef9ffd1ba3049badb398783f31aefb02f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-24Replace ENV_RAMSTAGE with ENV_PAYLOAD_LOADERSubrata Banik
This patch relying on new rule, ENV_PAYLOAD_LOADER which is set to ENV_RAMSTAGE. This approach will help to add future optimization (rampayload) in coreboot flow if required. Change-Id: Ib54ece7b9e5f281f8a092dc6f38c07406edfa5fa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-06-21soc/intel: Provide SPD manufacturer ID and module type to SMBIOSDuncan Laurie
The DIMM manufacturing ID was not being initialized and so the DIMMs were not described in SMBIOS tables properly. The module type can also be provided, but the SMBIOS code expects SPD module type values from DDR2 so the DDR3/4 values are adjusted before sending to SMBIOS. BUG=b:134897498 BRANCH=sarien TEST=dump and compare with dmidecode BEFORE: Type: DDR4 Manufacturer: Unknown (0) Form Factor: Unknown AFTER: Type: DDR4 Manufacturer: Hynix/Hyundai Form Factor: SODIMM Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21soc/intel/cannonlake: Rename SOC_INTEL_COMMON_CANNONLAKE_BASEArthur Heymans
What it really means to do is to use different FSP headers. Change-Id: I3c75d4aac8525ab2639608fb9c1b3a9afef0e943 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21cpu/x86/msr: Move IA32_MISC_ENABLE bits to common placeElyes HAOUAS
Change-Id: I51aa300358013cb0e76704feb2115d2a7e260f8a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31193 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21soc/intel/skylake: Remove ROMCCFLAGSArthur Heymans
This is never used. Change-Id: I414acc38f72e206eb48cfd98214985c320862c91 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-21soc/intel/skylake/romstage: Increase size of postcar stackChristian Walter
I increase the size oof the postcar stack to prevent a stack overflow during the measured boot feature. After common string functions have been moved from inline into .c file (https://review.coreboot.org/c/coreboot/+/32901), I experienced a stack overflow in the postcar stage while verifiying the romstage during measured boot. To prevent this, the stack size should be increased. To play it safe, it should be increased to 8 KiB - though this is open for discussion. Change-Id: I6f1a4631bcadfb8c7d1de5bf0919e40990a65606 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-21soc/intel/common/block/pcr: Remove unneded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33336 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-20soc/intel/braswell/smbus.c: Add support for i2c mode block writeFrans Hendriks
Intel Braswell supports i2c block write using SMBus controller. smbus_i2c_block_write() is added to configure SMBus controller in i2c mode before calling do_i2c_block_write(). Add smbus.c to ramstage. BUG=N/A TEST=Verify LCD display is working on Facebook FBG-1701 Change-Id: I50c1a03f624b3ab3b987d4f3b1d15dac4374e48a Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-18soc/intel/skylake: Select microcode updates depending on discrete PCHArthur Heymans
Change-Id: I05e97484605306afc70c726187bda8091216c9cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-16soc/intel/common: Fix booting issue without default IGD enabledSubrata Banik
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0) enabled from mainboard devicetree.cb. TEST=Previously platform was dying at "GMADR is not programmed!" with IGD disabled. Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13soc/intel/{cml, whl}: Add option to skip HECI disable in SMMSubrata Banik
This patch provides an additional option to skip HECI function disabling using SMM mode for WHL and CML platform, where FSP has dedicated UPD to make HECI function disable. User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated UPD. Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig to make HECI disable and WHL/CML has to rely on FSP to make HECI disable. Change-Id: If3b064f3c32877235916f966a01beb525156d188 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-13soc/intel/icelake: Replace PCI device LPC to ESPI as per EDSSubrata Banik
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI, hence modify SoC code to reflect the same. This patch replaces all SoC specific PCI LPC references with ESPI except anything that touches intel common code block. Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2019-06-12vendorcode/intel/fsp/fsp2_0/cometlake: Update FSP-M/S header files as per v1155Aamir Bohra
This CL implements below changes: 1) Update FSP-M and FSP-S header files as per FSP release version 1155. 2) Update the PcdSerialIoUartNumber reference in fsp_params.c with SerialIoUartDebugControllerNumber. Change-Id: I6d412424f9f5c5d2d56b789c2fef4bdb817a3019 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32844 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-12{drivers,soc/intel/braswell}: Implement C_ENVIRONMENT_BOOTBLOCK supportFrans Hendriks
No C_ENVIRONMENT_BOOTBLOCK support for Braswell is available. Enable support and add required files for the Braswell Bootblock in C. The next changes are made support C_ENVIRONMENT_BOOTBLOCK: - Add car_stage_entry() function bootblock-c_entry() functions. - Specify config DCACHE_BSP_STACK_SIZE and C_ENV_BOOTBLOCK_SIZE. - Add bootblock_c_entry(). - Move init from car_soc_XXX_console_init() to bootblock_soc_XXX_Init() Removed the unused cache_as_ram_main() and weak car_XXX_XXX_console_init() BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Building Google Banos Change-Id: Iab48ad72f1514c93f20d70db5ef4fd8fa2383e8c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-09soc/intel/icelake: Pass FSP-M/S UPD as per ICL requirementAamir Bohra
1. Gfx stolen memory requirement for ICL GFX 2. Enable PeiGraphicsPeim support Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09soc/intel/common: Skip SoC GT programming based on CONFIG_SKIP_GRAPHICS_ENABLINGSubrata Banik
Skip GT specific programming in coreboot to support early parts without GT enable. Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/acpi: Remove Return for PS0/3Christian Walter
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not allowed to return anything. Even an empty return will be resolved to Return(Null). In order to be conform with the specification, the code has been refactored to remove the return statements. Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 08:45:01 +0000