summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2019-01-08cpu/intel/car: Prepare for C_ENVIRONMENT_BOOTBLOCKKyösti Mälkki
Pass timestamps and BIST to romstage using the same signature as C_ENVIRONMENT_BOOTBLOCK will. Change-Id: Ic90da6b1b5ac3b56c69b593ba447ed8e05c8a4e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08arch/x86: Unify bootblock MMX register usageKyösti Mälkki
Have same usage of registers with romcc bootblock and C_ENVIRONMENT_BOOTBLOCK. Change-Id: Ibfa80e40f0b736a904abf4245fc23efc0cdc458d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-08soc/intel/icelake: Increase bootblock sizeSubrata Banik
This patch fixes icelake build brokenness due to bootblock size issue. Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a icelake board it is over the current 32K limit. BUG=b:122485106 TEST=Able to build dragonegg Change-Id: I66706e66ac1bce677fe11022d0eef44b9efc2e76 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-01-07soc/intel: Standardize names of common MSRsElyes HAOUAS
Use defined name in Intel 64 and IA-32 Architectures Software Developer’s Manual. Renamed MSRs are (register address, register name): 0x35 MSR_CORE_THREAD_COUNT 0x121 MSR_EMULATE_PM_TIMER 0x1f4 MSR_PRMRR_PHYS_BASE 0x1f5 MSR_PRMRR_PHYS_MASK 0x2f4 MSR_UNCORE_PRMRR_PHYS_BASE 0x2f5 MSR_UNCORE_PRMRR_PHYS_MASK Change-Id: I53f11a2ce831456d598aa21303a817d18ac89bba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-06soc/intel: Drop pmc_get_mainboard_power_failure_state_choice()Nico Huber
It's not needed anymore. Change-Id: I273acb2bf1675dc947927e3e6d2ebb78aa94518a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06usbdebug: Make the EHCI debug console work in the bootblockArthur Heymans
Currently this needlessly initializes the hardware in the both the romstage and the bootblock, but it works. Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the use better, related support files can be built to pre-ram stages regardless of usbdebug being enabled or not. Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK). Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-06usbdebug: Refactor init callsKyösti Mälkki
Expose the function that can unconditionally re-initialise EHCI debug host and gadget. Given the missing header in soc/intel files that prevented building with USBDEBUG_IN_ROMSTAGE=y, it is not actually known if those SOCs work at all for usbdebug. Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04soc/intel/fsp_broadwell_de: Use BLOBs for microcode updatesPatrick Rudolph
Add possibility to update microcode from BLOBs repo. No need to copy headers around which have an unclear license. Tested on wedge100s: * Microcodes are included into FIT. * Still boots to Linux. * 3rdparty/blobs at dd00ad1260ef1dc0ba8c55c06ab10c7639dc3eb1 Change-Id: I8ecfb7302a7fc847a51934942f6d323a4f96abba Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-03soc/intel/cannonlake: Add cannonlake ACPI GPIO opLijian Zhao
Follow instrcution from https://doc.coreboot.org/acpi/gpio.html to implement GPIO toggling method, covered for both CNP_LP and CNP_H pch. BUG=N/A TEST=Build and boot up fine on sarien platform, add an dummy STSX in DSDT table, read back from iotools to confirm the GPIO tx state get updated. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I006a6a8fc580c73ac0938968397a628a4ffe504f Reviewed-on: https://review.coreboot.org/c/30461 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-03soc/intel: Fix bad uses of __SIMPLE_DEVICE__Kyösti Mälkki
Cases of *dev = PCI_DEV(b,d,f) are invalid. Not caught because files only build with __SIMPLE_DEVICE__ defined. Remove cases of testing __SIMPLE_DEVICE__ in files that are not build for ramstage. Change-Id: If10a0efa187c9b1d9a5577008aa46f050f0aa309 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-02soc/intel/skylake/graphics: Ensure intel_gma_restore_opregion() is calledNico Huber
Change-Id: If981fa3db12b3a4fe1411f4cce9bac8564697769 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/25466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-01-01soc/intel/cannonlake: Enable CNVi based on devicetreeMaulik V Vaghela
Set PchCnvimode to Auto if CNVi is enabled in device tree. This will allow FSP to configure CNVi. Change-Id: I4f77fe5e9f561d3b498403e42dfc7afdcfaedf6f Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30516 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-30soc/intel: Fix ugly preprocessor macroKyösti Mälkki
Macro hides that dev_find_slot() takes two arguments. Change-Id: I639af31b9d4a2d702dfd2baebddbb8352e8bf9b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-12-30arch/x86: Use a common timestamp.inc with romcc bootblocksKyösti Mälkki
The same file was replicated three times for certain soc/intel bootblocks, yet there are no indications or need to do chipset-specific initialisation. There is no harm in storing the TSC values in MMX registers even when they would not be used. Change-Id: Iec6fa0889f5887effca1d99ef830d383fb733648 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-30cpu/intel/car: Drop remains of setup_stack_and_mtrrs()Kyösti Mälkki
Platforms have moved to POSTCAR_STAGE=y. Change-Id: I79c87e546805dbe0a4c28ed95f4d12666734eb79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-29soc/intel/skylake: Remove romcc related Kconfig optionArthur Heymans
Change-Id: I9090be3ccaa8a61312293e9da3679a752a908062 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28arch/x86: Drop spurious arch/stages.h includesKyösti Mälkki
Change-Id: I3b9217a7d9a6d98a9c5e8b69fe64c260b537bb64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28soc/intel: Drop romstage_after_car()Kyösti Mälkki
Platforms moved to POSTCAR_STAGE so these are no longer used. Change-Id: I9a7b5a1f29b402d0e996f2c2f8c6db3800cdddf3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-24soc/intel/*: Select SUPPORT_CPU_UCODE_IN_CBFS only onceArthur Heymans
This was selected twice. Change-Id: I7e20b7d3f05ecae98db1addf5aea7bf1159f4682 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-24Remove intel/skylake/bootblock/timestamp.incKyösti Mälkki
Platform has been moved to C_ENVIRONMENT_BOOTBLOCK and this file was for romcc bootblock. Change-Id: I2c249b18edd41c9a7798400d24b1c9228422d59b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-24soc/intel/quark: Drop BOOTBLOCK_SAVE_BIST_AND_TIMESTAMPKyösti Mälkki
This was empty stub call doing nothing, to avoid targeting non-existing MMX registers. Change-Id: I78b83e6724159ea1eb0f8a0cf9d5b7ddfc9877b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-24soc/intel/fsp_broadwell_de/acpi: Fix wrong table checksumPatrick Rudolph
Fix the following warning shown in dmesg: "ACPI BIOS Warning (bug): Incorrect checksum in table [FACP]" The table checksum was wrong as it was calculated twice and with the second time the checksum field wasn't set to zero. Change-Id: I375354bf3e95ebdac3b0dad43659d72c6ab3175a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-22soc/intel/fsp_broadwell_de: Select RELOCATABLE_RAMSTAGEArthur Heymans
Tested on wedge100s. Change-Id: I0dcbce230c151cecbbbeec581964cd5f44fbe046 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29911 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-20soc/intel/broadwell: implement RMRR ACPI tableMatt DeVillier
Modeled after Skylake implementation; uses duplicated intel common SA functions to get RMRR addresses Test: build/boot purism/librem13v1, observe IOMMU fully functional with intel_iommu=on kernel parameter Change-Id: I1a10a4f91b787b72f33150031b783d426148c25d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-20cpu/intel/common: decouple IA32_FEATURE_CONTROL lock from set_vmx()Matt DeVillier
Newer CPUs/SoCs need to configure other features via the IA32_FEATURE_CONTROL msr, such as SGX, which cannot be done if the msr is already locked. Create separate functions for setting the vmx flag and lock bit, and rename existing function to indicate that the lock bit will be set in addition to vmx flag (per Kconfig). This will allow Skylake/Kabylake (and others?) to use the common VMX code without breaking SGX, while ensuring no change in functionality to existing platforms which current set both together. Test: build/boot each affected platform, ensure no change in functionality Change-Id: Iee772fe87306b4729ca012cef8640d3858e2cb06 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30229 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-20soc/intel: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ic29891d78514db3b7eed48414a14e4ff579436c0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30004 Reviewed-by: David Guckian Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc/intel/cannonlake: SATA and DMI power optimizeLijian Zhao
Expose the FSP interface to enable SATA and PCH side DMI power optimize options. Actual step executed in FSP, step defined in cannonlake pch BIOS spec(CDI# 570374). Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ic0c589bb21e56800090bc0c75a0256a0409efc78 Reviewed-on: https://review.coreboot.org/c/30211 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc/intel/skylake: Add Sagv enum value definitionPraveen hodagatta pranesh
SaGv(system Agent Dynamic Frequency) have 4 settings Disabled, Fixedlow, Fixedhigh, Enabled. This patch add all 4 settings in enum definition and used in devicetree. BUG=None Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I8f3b56f4d2bea1836373cc505ef5147144100b95 Reviewed-on: https://review.coreboot.org/c/30305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-19soc/intel/braswell/linclude/soc/device_nvs.h: Fix typoFrans Hendriks
Use 'BAR 1' for the bar1 structure fields. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I1d1278f549fc8a2f3e743e2e2019d3e5f7005614 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/30277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2018-12-19soc/intel/skylake: Generate DMAR tables for FSP 1.1 boardsMatt DeVillier
Commit c37b0e3 [soc/intel/skylake: Generate ACPI DMAR table] only generates DMAR tables for boards using FSP 2.0, which leaves out Skylake Chromebooks, which use FSP 1.1. Correct this omission by adding the same functionality for FSP 1.1 boards. Test: build/boot on U-series Skylake Chromebook, observe IOMMU fully functional with intel_iommu=on kernel parameter. Change-Id: I68837f58aac357fa3f58979fe92d8993fae58640 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-19soc/intel/cannonlake: Auto turn on HDA controllerLijian Zhao
Update HDAenable bit in Fsp memory init UPD data base on devicetree settings. BUG=N/A TEST=N/A Change-Id: I5159c00a855a2a9516714ccee8ee9933465c5063 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19soc/intel/cannonlake: Declare SATA Mode clearLijian Zhao
FSP support two SATA modes as AHCI mode (0) and RAID mode (1), make it more clear in header file. Change-Id: I1edcadc0048df839da145260b60f9f7720d981fe Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc/intel/cannonlake: Enable CPU flexible ratioLijian Zhao
CPU ratio will be fixed to non-turbo max value if CpuRatio UPD had been set to zero. BUG=N/A TEST=Boot up into sarien system, cat /proc/cpuinfo and cpu frequency is changing. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I3e82293c8b6027ddf9a528d0654fe46f233dcb82 Reviewed-on: https://review.coreboot.org/c/30216 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19src/soc/intel/braswell/northcluster.c: Correct Chromeos RAM reservationFrans Hendriks
RAM is reserved for Chromeos even when Chrome is not used. Use CONFIG_CHROMEOS to determine if RAM must be reserved. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I3f55bf96ab2ec66cddbb54de03455a9bfd194682 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-19soc/intel/cannonlake: Amend comment typoLijian Zhao
Fix typo of "VGOIO" back to "VGPIO". Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ia2b7cb0e5fe2817acc3e3f4656b98dc2462b397f Reviewed-on: https://review.coreboot.org/c/30147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-12-19soc: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: Idef8c556ac8c05c5e2047a38629422544392cd62 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-19soc/intel/cannonlake: Add Acoustic featuresLijian Zhao
Expose the following FSP UPD interface into coreboot, which is the following: AcousticNoiseMitigation FastPkgCRampDisableIa FastPkgCRampDisableGt FastPkgCRampDisableSa FastPkgCRampDisableFivr SlowSlewRateForIa SlowSlewRateForGt SlowSlewRateForSa SlowSlewRateForFivr Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I21f53c594a085794474e87eb6781b51db88d0c10 Reviewed-on: https://review.coreboot.org/c/30207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19soc/intel/icelake: Add GPIO group pad base for ACPISubrata Banik
commit msg copied from commit id: 64c9f1584c63403207ee85b1d54ca594ae1fbedf The GPIO drivers in Windows and Linux for the Icelake CPU have a sparse GPIO map and do not allocate pins contiguously. Each GPIO group is allocated as 32 pads regardless of whether the hardware actually has that many in the group. It appears this originated with a bug in Windows/UEFI and was carried over to Linux in order to work with existing firmware: https://lore.kernel.org/patchwork/patch/855244/ In order to support using ACPI GPIOs it is necessary for coreboot to be compatible with this implementation. The GPIO groups that are usable by the OS are declared with a pad base which is then used to compute the number for ACPI GPIOs. Change-Id: I94fafd8af13cf229f5c467de5179aed021465739 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-18soc: Remove unneeded include <pc80/mc146818rtc.h>Elyes HAOUAS
Change-Id: I64e061017ee0b1202ce5482b26c7550e4cd0f0a7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18soc/braswell: ensure ACPI opregion restored on S3 with GOP initMatt DeVillier
The Intel GMA ACPI opregion address needs to be set on S3 resume, otherwise the Windows display driver fails to re-initialize correctly. Fix by ensuring the address is set correctly regardless of display init type used (GOP or VBIOS). Test: build/boot on google/edgar, ensure internal display functional following S3 resume under Windows 10. Change-Id: I471c44e8ba4514e4a2ddf6739109b759145598ed Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-18soc/baytrail: add vmx support via CPU_INTEL_COMMONMatt DeVillier
Mirrors addition to Braswell SoC in commit d3d0f07. Test: build/boot Windows 10 on Baytrail ChromeOS device, verify Windows shows virtualization as enabled. Change-Id: Ia1fafa73325814fed30b2ac91290b682dd8eab04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-17soc/intel/fsp_broadwell_de: Drop unused filesNico Huber
It seems they are not included anywhere, Jenkins? Change-Id: I629cdeb337fce381c69bd1ba0520e524ccdd90dd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/26756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-14soc/intel/cannonlake: Fix CNL-H GPIO pin mapDuncan Laurie
The GPIO pin map for CNL-H does not match with the OS expected pin numbers. This has been updated to match what is used by the Linux kernel pinctrl driver and the pad base has been set for the GPIO groups to match the sparse GPIO map used by the kernel. I do not have CNL-H hardware to test this so it is verified against the kernel driver at drivers/pinctrl/intel/pinctrl-cannonlake.c Change-Id: Ife7d3090d654b0b88c6911befa08bf6abd4f2ff9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30134 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-14soc/intel/cannonlake: Add GPIO group pad base for ACPIDuncan Laurie
The GPIO drivers in Windows and Linux for the Cannonlake CPU have a sparse GPIO map and do not allocate pins contiguously. Each GPIO group is allocated as 32 pads regardless of whether the hardware actually has that many in the group. It appears this originated with a bug in Windows/UEFI and was carried over to Linux in order to work with existing firmware: https://lore.kernel.org/patchwork/patch/855244/ In order to support using ACPI GPIOs it is necessary for coreboot to be compatible with this implementation. The GPIO groups that are usable by the OS are declared with a pad base which is then used to compute the number for ACPI GPIOs. BUG=b:120686247 TEST=tested with write protect GPIO on sarien board. Before this change the ACPI pin number was 220 which did not correspond to the pin number in Linux. After this change the ACPI number is 303, which maps to the correct GPIO in Linux. Now the GPIO value reported by the kernel changes when the WP pin is toggled in hardware. Change-Id: I4f1a9e118d7e48f2445ccbb62a12a22e9a832c51 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-14soc/intel/common: Add support for GPIO group pad baseDuncan Laurie
In some situations the GPIO pad numbers used by the OS are not contiguous and coreboot must provide a way for ACPI to provide the expected GPIO number to the OS. To do this each GPIO group can now have a pad base value, which will be used as the starting pin number for this group and it is added to the relative pin number of this GPIO to compute the ACPI pin number for a particular GPIO. By default this change has no effect because the existing uses of INTEL_GPP() will set the pad base to PAD_BASE_NONE and the GPIO number is used as the ACPI pin number without translation. BUG=b:120686247 TEST=tested on a sarien(cannonlake) board Change-Id: I25f73df45ffae18c5721a00ca230a6b07c250bab Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30131 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-13cpuid: Add helper function for cpuid(1) functionsSubrata Banik
This patch introduces 3 helper function for cpuid(1) : 1. cpu_get_cpuid() -> to get processor id (from cpuid.eax) 2. cpu_get_feature_flags_ecx -> to get processor feature flag (from cpuid.ecx) 3. cpu_get_feature_flags_edx -> to get processor feature flag (from cpuid.edx) Above 3 helper functions are targeted to replace majority of cpuid(1) references. Change-Id: Ib96a7c79dadb1feff0b8d58aa408b355fbb3bc50 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-11soc/intel/braswell/northcluster.c: Fix typoFrans Hendriks
Correct typo of 'resource' BUG=N/A TEST=N/A Change-Id: I79dde87007759b7cab92061df37fd3a19d5e3d1f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/30125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-12-10mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parametersAamir Bohra
This implementation configures below parameters: 1. Enable SaGv, isclk. 2. Set Pcie rootport enable, Clock source usage and clkreq. 3. Configure SATA and LPSS controllers parameters. 4. Enable CNVI controller, configure Wifi end device under PCIE RP1. 5. Add TPM device support under GSPI1. Change-Id: I585e82799eea0bad19ad2c94d6b4b3024f930ed4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-10soc/intel/cannonlake: Fix GPIO reportingDuncan Laurie
The kernel GPIO driver only expects some GPIO communities to be exported in the _CRS and it will not work correctly if the other communities are exported. CNL-LP: GPIO communities 0, 1, 4 CNL-H: GPIO communities 0, 1, 3, 4 Additionally one of the pin offset values was incorrect in GPIO community 1 for CNL-LP. This doesn't have any specific failure mode but it was found when auditing the GPIO code. Details of the kernel expected map can be found in the linux kernel at drivers/pinctrl/intel/pinctrl-cannonlake.c BUG=b:120686247 TEST=check /sys/kernel/debug/pinctrl/INT34BB:00/pins to ensure that pins >= 198 are not reading all zeros for the pin config registers. Change-Id: Ie1a2f3b9f9f4b24a9fc57e468dee50e99753912f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07soc/intel/apollolake: Print ME version on exit of BS_DEV_INIT stageKarthikeyan Ramasubramanian
Recently there has been a change to print ME version. But the stage at which the version is printed causes the HECI device to remain in D0 state. This in turn prevents the SoC from entering S0ix state. This change moves printing ME version a little earlier so that the HECI device is put into D0i3 state by FSP and the SoC can enter S0ix state successfully. BRANCH=octopus BUG=b:120571529 TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that the device boots to ChromeOS. Ensure that the device enters S0ix successfully(using suspend_stress_test -c 25). Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07soc/intel/cannonlake: Fix I2C clock inputDuncan Laurie
The input clock for the I2C controllers was set at 133MHz but should really be 216MHz according to the kernel: https://patchwork.kernel.org/patch/10408729/ "Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C." This change was tested on a sarien board where an I2C trackpad that was measuring ~700MHz on I2C and is now measuring ~380MHz. Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30061 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06soc/intel/apl: Warn if CBFS is outside the memory mapped areaNico Huber
As part of the memory mapped BIOS region is covered by SRAM, check that CBFS always fits the effectively mapped region of flash. This is usually taken care of by reserving the SRAM range in the FMAP (e.g. as BIOS_UNUSABLE), but can be missed. Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-06src/soc/intel/braswell/southcluster.c: Config i8254 timerFrans Hendriks
ISA timer is not configured. Add call setup_i8254(). BUG=N/A TEST=Intel CherryHill CRB Change-Id: If45c4975d147f28a456198ea290efba1c8b0464b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05soc/intel/baytrail: Implement POSTCAR stageArthur Heymans
Use common code to tear down CAR. Change-Id: I62a70ae35fe92808f180f2b5f21c5899a96c2c16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/baytrail: Use postcar_frame functions to set up frameArthur Heymans
Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29929 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/baytrail: Improve CAR setupArthur Heymans
This patch does the following: - improve the style by removing tabs in front of jmp addresses - Make the code for zeroing variable MTRR more readable (copied from cpu/intel/car) - Fetch PHYSMASK high from cpuid instead of Kconfig Change-Id: I6ba67bb8b049c3f25b856f6ebb1399d275764f54 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/broadwell: Implement postcar stageArthur Heymans
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05smmstore: make smmstore's SMM handler code follow everything elsePatrick Georgi
Instead of SMMSTORE_APM_CNT use APM_CNT_SMMSTORE and define it in cpu/x86/smm.h Change-Id: Iabc0c9662284ed3ac2933001e64524011a5bf420 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30023 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05elog: make elog's SMM handler code follow everything elsePatrick Georgi
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in cpu/x86/smm.h Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30022 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/common/lpc_lib: Add function to disable LPC Clock RunNico Huber
Needed to fix up FSP-S bug on Apollo Lake. Change-Id: If09fee07debb1f0de840b0c0bd7a65d338665f7c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-04soc/intel/common: Limit BIOS region cache to 16MBLijian Zhao
Cache BIOS region can boost boot performance, however it can't be over 16MB, according to processor EDS vol1(Apollolake/Skylake/WhiskeyLake), FLASH+APIC LT will be less than 20MB under 4G. Set the maxiam to 16GB to save numbers of mtrr entries. BUG=b:119267832 TEST=Build and boot up fine on whiskeylake rvp platform. Change-Id: I46a47c8bf66b14fb2fcb7b6b1d30d02886c450a4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add USB device namesDuncan Laurie
Add the ACPI device names for the USB ports to match what is in the DSDT so USB ports can be defined in the SSDT. Change-Id: Ibb323bbd324811fa3178b0cba3d7f0a315169486 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Increase bootblock sizeDuncan Laurie
Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a cannonlake board it is over the current 32K limit. Change-Id: I155cb0a6af1746af6833fa9f35c2ea6fe0bc709f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add DPTF ACPI codeDuncan Laurie
Define the constants that DPTF expects from the SOC in order to use the common DPTF ACPI code. For cannonlake this indicates the CPU device is called B0D4 and is at PCI address 00:04.0. Change-Id: I43c2f8dd7281d3e9f791ab01478ee7823fd6b128 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29759 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Add method for temp conversionDuncan Laurie
Add a method to convert from 1/10 Kelvin to Celsius. This is useful for EC devices where the sensor temperature are stored in Celsius instead of Kelvin. Change-Id: I6b1154f5ba13416131a029966d6d5c1598904881 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/cannonlake: Load FSP teardown optionallyLijian Zhao
Make build still pass in case of no FsptUpd.h available. BUG=N/A TEST=Delete FsptUpd.h and build pass wihtout FSP_CAR set. Change-Id: I3936d3deb8b079bd4db11e444f6bb7f9605520dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/intel/apl: Configure LPC serial IRQ modeNico Huber
Sync the FSP settings with what coreboot does. Why both FSP and coreboot configure this redundantly stays a secret. TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC works correctly now, but was confused by the wrong settings before because the FSP defaults allowed to disable the LPC clock. Change-Id: Id1c7180f460678bf0f9458228591050dd628c052 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/fsp_baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I01e4397b9a1c15eff4b856cbc697fa2b4bc9761f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/denverton_ns: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: If482c64e7133cc6d82472d121ac138fc1b60a183 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/common: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/broadwell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: I79d2eed9b89b420554ce10d1fc0f151b1872afe2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/braswell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I93c11e89da34c5432c6ce0415998b47bad339763 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29889 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Ifb5a5c1255f9a922063293bf430e849909468eaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29888 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/skylake: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I182585fd09e4ce848c860d00eb612e8f5fdde35e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29884 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-11-29{mb/cubieboard,soc/intel/quark}: Remove define __SIMPLE_DEVICE__Elyes HAOUAS
Remove the __SIMPLE_DEVICE__ define from files used only in romstage. This is not required since romstage always defines __SIMPLE_DEVICE__. Change-Id: I8db1b15c9186536c9b8a6b5d667fa5a11af1bad2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29821 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28soc/intel/{baytrail,broadwell}: Correct Chromeos RAM reservationFrans Hendriks
RAM is reserved for Chromeos even when Chrome is not used. Use CONFIG_CHROMEOS to determine is RAM must be reserved. BUG=N/A TEST=Intel BayTrail CRB Change-Id: Ic1f5089227f802e2b2f62dc02fa0d1648c1855b5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28soc/intel/icelake: Fix IO decode setupSubrata Banik
Make pch_early_iorange_init() function similar to soc/intel/cannonlake/bootblock/pch.c while fixing below issue: * COM1 not being enabled properly. TEST=Able to get serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I5ab02f46d27e667be3d9328d94b634ef04038d2f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-11-28src/soc/intel/braswell/include/soc/irq.h: Change PIRQ_PIC_IRQDISABLE valueFrans Hendriks
Using 0 for PIRQ_PIC_IRQDISABLE might conflict with using IRQ0 as PIRQ. Change PIRQ_PIC_IRQDISABLE value to 0x80, so value 0 is reserved for IRQ0. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I18706f12e7c2293e948eb10818393f0d1870f514 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28src/soc/intel/braswell/include/soc/iomap.h: Correct IO_BASE_SIZE and ↵Frans Hendriks
ILB_BASE_SIZE The sizes of IO_BASE and ILB_BASE areas a incorrect. Correct IO_BASE_SIZE and ILB_BASE_SIZE values. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I23c3fd608598c5ec2271d393168ac4bf406772b4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-28soc/intel/braswell/northcluster.c: Reserve local APIC resourcesFrans Hendriks
The resources of the local APIC are not reserved. Use mmio_resource() to add local APIC resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ieb9de45098d507d59f1974eddb7a94cb18ef7903 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28src/soc/intel/braswell/acpi/lpc.asl: Add ACPI and GPIO basesFrans Hendriks
ACPI and GPIO base are used by LPC controller, but not reserved. Both bases are added to the LPC device resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I5248694b497c4965d79dd7c25ec97592dc0dddbc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-27soc/intel/cannonlake: Delete unused macros in lpc.hSubrata Banik
TEST=Able to build and boot successfully. Change-Id: If013d8e59046152e9f1a026f48bd9cd9b43ab6af Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29836 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27soc/intel/skylake: Add device settings for PL4 power limitPraveen hodagatta pranesh
PL4 is a preemptive CPU package peak power limit,it will never be exceeded. Power is preemptively lowered before limit is reached. This change provides option in devicetree and feeds FSP PowerLimit4 UPD for power limit purpose. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I64b5a029104a102e5741e8b37c7992f2693180e8 Reviewed-on: https://review.coreboot.org/c/29808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27soc/intel/common: Add audio controller device id for SKL-H pchPraveen hodagatta pranesh
This patch add new HDA controller pci id in common hda driver. BUG:None TEST:Boot to Yocto linux on kabylake rvp11 and verified audio playback functionality. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I820115c31bf6b8e1f1afe900b68690d84b51c259 Reviewed-on: https://review.coreboot.org/c/29807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-26soc/intel/icelake: Add support to enable/disable USB charging in s3/S5Aamir Bohra
Change-Id: I0559b8a546f7a67759377c7f51b2faa2280aa797 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29793 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23soc/intel/apollolake: Remove cycle in Kconfig symbol dependenciesPatrick Georgi
Change-Id: Iad60a5c8863283b7d373e1f6aaff48c40b7bb274 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23src/soc/intel/braswell/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I348eda57ab9dc0bd45f8dc9ab0e7c47c462102fe Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29788 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23src/soc/intel/baytrail/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel BayTrail CRB Change-Id: I3fe50effdb8236bc45d33a2345a773653df68d90 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-23soc/intel/skylake: Drop FSP_CAR optionsNico Huber
It's not implemented for Skylake, all combinations that try to enable it either result in Kconfig or linker errors. Move `config SKIP_FSP_CAR` into drivers/intel/fsp1_1 where it's effective. TEST=Built Intel/Kunimitsu (FSP1.1) and Intel/KBLRVP8 (FSP2.0) default configs with and without this patch: binaries stay the same. Change-Id: Iae0a2d2c7fd7a71ed24118564e6080c4789cda28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-23intelblocks/cpu: Fix wrong comment for P_Req field in PERF_CTL MSRWerner Zeh
The mentioned bits 14:8 are wrong as the functions always write bits 15:8. What happens is visible in the written code. There is no need for an extra comment. Change-Id: I59b4d24d01a0a8fa74912f9754e7bbb217ca269d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-23soc/intel/apollolake: Add Kconfig switch to enable minimum clock ratioWerner Zeh
Add a Kconfig switch to be able to set the CPU clock to the lowest possible ratio. If enabled the CPU will consume as little power as possible while providing the lowest performance. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to its need. Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 20:36:56 +0000