summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2020-12-08soc/intel/common/block/cpu/car: Fix two whitespace issuesSubrata Banik
This patch removes 1 unnecessary whitespace and add 1 whitespace into IA common car code block. Change-Id: I3690b5f219f5326cfca7956f21132062aa89648e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07soc/intel/skl: set PEG port state to autoMichael Niewöhner
Setting PegXEnable to 1, statically enables the PEG ports, which blocks the SoC from going to deeper PC states. Instead, set the state to "auto" (2), so the port gets disabled, when no device was detected. Note: Currently, this only works with the AST PCI bridge disabled or the VGA jumper set to disabled on coreboot, while it works on vendor in any case. The reason for this is still unclear. Test: powertop on X11SSM-F shows SoC in PC8 like on vendor firmware instead of just PC3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3933a219b77d7234af273217df031cf627b4071f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-07sb/intel/common: Modify CONFIG_LOCK_MANAGEMENT_ENGINE behaviorSridhar Siricilla
The patch modifies KConfig behaviour if CSE Lite SKU is integrated into the coreboot. When the CSE Lite SKU is integrated, the KConfig prevents writing to ME region but keeps read access enabled. Since CSE Lite driver checks the signature of RW partition to identify the interrupted CSE firmware update, so host must have read access to the ME region. Also, the patch modifies the KConfig's help text to reflect the change. When CSE Lite SKU is integrated, master access permissions: FLMSTR1: 0x002007ff (Host CPU/BIOS) EC Region Write Access: disabled Platform Data Region Write Access: disabled GbE Region Write Access: disabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled EC Region Read Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: disabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled BUG=b:174118018 TEST=Built and verified the access permissions. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2f6677ab7b59ddce827d3fcaae61508a30dc1b28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-07common/block/cse: Rename cbfs_boot_load_file() to cbfs_load()V Sowmya
This patch renames the cbfs_boot_load_file() to cbfs_load() to avoid the build errors for cselite and align with the new changes to API https://review.coreboot.org/c/coreboot/+/39304 . Change-Id: I717f0a3291f781cc3cf60aae88e7479762ede9f9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05soc/intel/jasperlake: Add Acoustic noise mitigation configurationMaulik V Vaghela
This patch exposes acoustic noise mitigation related UPDs/configuration to be filled from devicetree. For each variant, we might have different values for various parameters. Filling it from devicetree will allow us to fill separate values for each board/variant. Note that since JasperLake only has one VR, we're only filling index 0 for slew rate and FastPkgCRampDisable. BUG=b:162192346 BRANCH=dedede TEST=code compilation is successful and values from devicetree are getting reflected in UPDs Change-Id: Id022f32acc3fd3fe62f78e3053bacdeb33727c02 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/xeon_sp: Don't use common block acpi.hMarc Jones
Don't use the common block acpi.h when we aren't using the COMMON_ACPI config. Fixes a dependency build issue in an upcoming commit. Change-Id: I3b80f7bbdf81e594fdde5b750c666edd8ca7268d Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-12-05soc/intel/common/block/usb4: Add the PCI ID for ADLV Sowmya
This patch adds the PCI device ID for Alderlake CPU xHCI. Change-Id: I4074a81aa9be2ef3a0956da08bece32a613415ab Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-04soc/intel/alderlake: Align chipset.cb with pci_devs.hEric Lai
Refer pci_devs.h naming to align chipset.cb. Correct thc0, thc1 and add cnvi_bt. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iac33983dc12ed4e5b9257c50d82adc8e4e728ad6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48153 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04src/soc/intel/alderlake: Enable the PCH HDAV Sowmya
This patch enables the PCH HDA device based on the devicetree configuration. Change-Id: I1791b769f4ab41cf89d82cf59049a2980c6c1eb0 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/{skl,cnl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so they can be configured for using NMI gpios. References: - CMP-LP: Intel doc# 615146-1.2 - CMP-H: Intel doc# 620855-002 - SPT-H: Intel doc# 332691-003 - SPT-LP: Intel doc# 334659-005 - CNP-H: Intel doc# 337868-002 Test: trigger NMI via gpio on Supermicro X11SSM-F did not work before but now makes the Linux kernel complain about a NMI. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4d57ae89423bdaacf84f0bb0282bbb1c9df94598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48091 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/common/block/gpio: add code for NMI enablingMichael Niewöhner
Especially server boards, like the Supermicro X11SSM-F, often have a NMI button and NMI functionality that can be triggered via IPMI. The purpose of this is to cause the OS to create a system crashdump from a hang system or for debugging. Add code for enabling NMI interrupts on GPIOs configured with PAD_CFG_GPI_NMI. The enabling mechanism is the same as SMI, so the SMI function was copied and adapted. The `pad_community` struct gained two variables for the registers. Also register the NMI for LINT1 in the MADT in accordance to ACPI spec. Test: Linux detects the NMI correctly in dmesg: [ 0.053734] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4fc1a35c99c6a28b20e08a80b97bb4b8624935c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04intel/common/block/gpio: only reset configured SMI instead of allMichael Niewöhner
Currently, when a SMI GPIO gets configured, the whole status register is get written back and thus, all SMIs get reset. Do it right and reset only the correspondig status bit of the GPIO to be configured. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Iecf789d3009011381835959cb1c166f703f1c0cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/48089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03soc/intel/skylake: Add chipset devicetreeFelix Singer
Set most of the devices to off to keep current behaviour. Change-Id: Ic4dbd965c84c3679e42a181dea0e7e618c12fb97 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-03src: Remove redundant use of ACPI offset(0)Elyes HAOUAS
IASL version 20180927 and greater, detects Unnecessary/redundant uses of the Offset() operator within a Field Unit list. It then sends a remark "^ Unnecessary/redundant use of Offset" example: OperationRegion (OPR1, SystemMemory, 0x100, 0x100) Field (OPR1) { Offset (0), // Never needed FLD1, 32, Offset (4), // Redundant, offset is already 4 (bytes) FLD2, 8, Offset (64), // OK use of Offset. FLD3, 16, } We will have those remarks: dsdt.asl 14: Offset (0), Remark 2158 - ^ Unnecessary/redundant use of Offset operator dsdt.asl 16: Offset (4), Remark 2158 - ^ Unnecessary/redundant use of Offset operator Change-Id: I260a79ef77025b4befbccc21f5999f89d90c1154 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43283 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Enable CBFS mcache on most chipsetsJulius Werner
This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Some older chipsets with insufficient SRAM/CAR space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-02soc/intel/common/cse: Perform cse_fw_sync on BS_PRE_DEVICE entryFurquan Shaikh
This change drops the special check added for TGL/JSL platforms and performs cse_fw_sync on BS_PRE_DEVICE entry. This was being done later in the boot process to ensure that the memory training parameters are written back to SPI flash before performing a reset for CSE RW jump. With the recent changes in CB:44196 ("mrc_cache: Update mrc_cache data in romstage"), MRC cache is updated right away in romstage. So, CSE RW jump can be performed in BS_PRE_DEVICE phase. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I947a40cd9776342d2067c9d5a366358917466d58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-02soc/intel/skylake: Fix compilation under x86_64Patrick Rudolph
Change-Id: I37382ab06a8f1760e955d1ec76a6a00958b05999 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48177 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/elkhartlake: Update KconfigTan, Lean Sheng
Update Kconfig: 1. use FSP2.1 instead of 2.2 2. remove HECI_DISABLE_USING_SMM config 3. update CAR related stack & ram size 4. update FSP heap size 5. set IED region size = 0 as it is not used 6. update SMM TSEG size 7. update RP & I2C max device #s 8. update UART base address Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I6a44d357d71be706f402a6b2a4f2d4e7c0eeb4a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45078 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/skylake: Map VBIOS IDsPaul Menzel
The extracted VBIOS Option ROM ships the same ID for several generations, not matching the ID on the hardware resulting in a mismatch, and coreboot does not run the Option ROM. PCI ROM image, vendor ID 8086, device ID 0406, ID mismatch: vendor ID 8086, device ID 5916 Add the appropriate mappings. TEST=coreboot runs the ROM on the TUXEDO Book BU1406. Change-Id: Ia167d91627a7ff1b329ea75f150b3ce95c0acccb Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43853 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/smm/smihandler: Fix compilation under x86_64Patrick Rudolph
Change-Id: Ie44ded11a6a9ddd2a1163d2f57dad6935e1ea167 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01soc/intel/common/block/cpu/car/exit_car: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ieac4a4924ff4684b2a419471cd54e3d3b1f5bbe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48171 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/cpu/car/cache_as_ram: Add x86_64 supportPatrick Rudolph
Doesn't affect x86_32. Tested on Intel Skylake. Boots into bootblock and console is working. Change-Id: I1b36ca8816dab9d30754aadd230c136978e3b344 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48170 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/systemagent: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ibc8dc1cf33f594284edb82d4730967e077739c3c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-30soc/intel/skylake: Fix commentFelix Singer
mainboard_silicon_init_params() is *not* meant for configuring GPIOs. It should only be used to configure FSP options, which can not be configured elsewhere. Change-Id: Ia92d0d173af9c67600e93b473480967304772998 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48008 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/intel/alderlake: Add initial chipset.cbTim Wawrzynczak
Similar to the chipset.cb for TGL, this patch gives alias names to all of the published PCI devices. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6576ef4237c1fc8439795ad5b64b1840504edf73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48009 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/intel/tigerlake: Add some helper macros for accessing TCSS DMA devicesTim Wawrzynczak
Change-Id: I6289d2049fbbb6bb532be3d9e2355c563ec98d1b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-30lp4x: Add new memory parts and generate SPDsNick Vaccaro
Add MT53D512M64D4NW-046 WT:F memory part to LP4x global list of available LP4x parts and to the global JSON file containing LP4x parts and their characteristics. BUG=b:172993397 TEST=none Change-Id: I09c6eab640c169dbdb451964967d14a31e314496 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-29soc/intel: Configure P2SB before other PCH controllersFurquan Shaikh
This change updates bootblock_pch_early_init() to perform P2SB configuration before any other PCH controllers are initialized. This is done because the other controllers might perform PCR settings which requires the PCR base address to be configured. As the PCR base address configuration happens during P2SB initialization, this change moves the p2sb init calls before any other PCH controller initialization. BUG=b:171534504 Change-Id: I485556be003ff5338b4e2046768fe4f6d8a619a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47885 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29soc/intel/alderlake: Add lp5_ccc_config to the board memory configurationSridhar Siricilla
TEST=Able to pass LPDDR5 MRC training with Lp5CccConfig override. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I24b1cf50c1b0b945fce75239bac38e40aeb8a83a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47436 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-28soc/intel/skl: correct OC pin skip value for disabled usb portsMichael Niewöhner
Commit 056d552 introduced a bug where 0xFF gets set as OC pin value to supposedly skip programming an OC pin for a disabled USB port. While the value is correct for the other platforms, Skylake uses 0x08 for this purpose. Correct this by using the enum value OC_SKIP (0x08) instead. Change-Id: I41a8df3dce3712b4ab27c4e6e10160b2207406d1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-27soc/intel/jasperlake: Enable VT-d and generate DMAR TableMeera Ravindranath
Update UPDs required for the creation of DMAR table. By default coreboot was not generating DMAR table for IOMMU which was resulting in below error message in kernel: DMAR: [Firmware Bug]: No DRHD structure found in DMAR table DMAR: No DMAR devices found These changes will publish DMAR table through ACPI and will not result in the above error. BUG=b:170261791 BRANCH=dedede TEST=Build Dedede, boot to kernel and check dmesg if DMAR table exists. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I97a9f2df185002a4e58eaa910f867acd0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-11-25soc/intel/{broadwell,quark}: Drop `PEI_DATA` typedefAngel Pons
It is not used. Change-Id: I3ef0878811bf2ec406ded03aac6c5dfeb5bf45a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47001 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Enable SMI handlerRocky Phagura
SMI handler was not installed for Xeon_sp platforms. This enables SMM relocation and SMI handling. TESTED: - SMRR are correctly set - The save state revision is correct (0x00030101) - SMI's are properly generated and handled - SMM MSR save state are not supported, so relocate SMM on all cores in series - Verified on OCP/Deltalake mainboard. NOTE: - Code for accessing a CPU save state is not working for SMMLOADERV2, so some SMM features like GSMI, SMMSTORE, updating the ACPI GNVS pointer are not supported. - This hooks up to some soc/intel/common like TCO and ACPI GNVS. GNVS is broken and needs to be fixed separately. It is unknown if TCO is supported. This might require a cleanup in the future. Change-Id: Iabee5c72f0245ab988d477ac8df3d8d655a2a506 Signed-off-by: Rocky Phagura <rphagura@fb.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46231 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Select INTEL_COMMON_BLOCK_TCOArthur Heymans
TCO is configured by FSP. This mostly makes it possible to report TCO events in SMM if enabled. Change-Id: I4f81c7888e45ed01ee68b1d6e6a9986a4d735467 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47764 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Hook up the PMC driverArthur Heymans
The soc code was already there but it was never linked. Change-Id: I75ee08dab524bc40f1630612f93cbd42025b6d4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/skylake: Support NHLT 1ch DMICBenjamin Doron
Allows advertising support for a 1ch array DMIC in the NHLT table. Boards use the NHLT if a microphone is connected to the DSP. Tested on an Acer Aspire VN7-572G (Skylake-U) on Windows 10. A custom ALSA topology will be required for Linux. Change-Id: Idba3a714faab5ca1958de7dcfc0fc667c60ea7fd Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-24soc/intel/skylake: Use correct NHLT_PDM_DEV definitionBenjamin Doron
According to the NHLT specification[1], PDM_DEV is defined as "1" on Kabylake based platforms. coreboot currently sets it to "0" on all platforms. Add an entry to the enum and use it to define NHLT_PDM_DEV for Kabylake. "Device Type" will resume from "2" on all platforms, but entries are currently reserved. Tested on an Acer Aspire VN7-572G (Skylake-U), which has a 1ch array DMIC, on Windows 10. 1. https://01.org/sites/default/files/595976_intel_sst_nhlt.pdf Change-Id: Ifbc67228c9e7af7db5154d597ca8d67860cfd2ed Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23soc/intel/cannonlake: Add ICC limits for CFL-S DT 4Angel Pons
TEST=Boot with an i3-9100F and see no vr_config errors. Change-Id: Ic62ef038ad11d147a38804f694d3e056611b96db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47445 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23soc/intel/denverton_ns: Hook up SMMSTOREAngel Pons
Tested on Intel Harcuvar CRB, SMMSTORE is now working. Change-Id: I996c7bf3b510a8f0a9d1bb7d945ce777b646448e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23soc/intel/alderlake: Update UART0 GPIO as per latest schematicsSubrata Banik
UART0_RX: C8 -> H10 UART0_TX: C9 -> H11 GPIO PIN Mode: NF1 -> NF2 Change-Id: I7a193b67e22258ff600679f27955a37480ed3f0d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-23soc/intel/alderlake: Update DCACHE_BSP_STACK_SIZE and DCACHE_RAM_SIZESubrata Banik
According to the latest Alderlake Platform FSP Integration Guide, the minimum amount of stack needed for FSP-M is 512KiB. Change DCACHE_RAM_SIZE and DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined empirically). TEST=Able to pass FSP-M MRC training on LPDDR5 SKU without any hang. Change-Id: Ic831ca9110a15fdb48ad31a7db396740811bf0f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/alderlake: Fix overlapping memory address used for early GSPI2 and ↵Bora Guvendik
UART bars BAR address used during early initilization of GPSI 2 is overlapping with UART bar. //For GSPI2 this is the address calculated GSPI_BUS_BASE(0xFE030000,2)=0xFE032000 GSPI_BUS_BASE(bar, bus) ((bar) + (bus) * 4 * KiB) //overlaps with CONSOLE_UART_BASE_ADDRESS -> 0xfe032000 TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3249a91df8a2e319aff6303ef9400e74163afe93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22soc/intel/tigerlake: Fix overlapping memory address used for early GSPI2 and ↵Bora Guvendik
UART bars BAR address used during early initilization of GPSI 2 is overlapping with UART bar. //For GSPI2 this is the address calculated GSPI_BUS_BASE(0xFE030000,2)=0xFE032000 GSPI_BUS_BASE(bar, bus) ((bar) + (bus) * 4 * KiB) //overlaps with CONSOLE_UART_BASE_ADDRESS -> 0xfe032000 Change-Id: Id9f2140a6dd21c2cb8d75823cc83cced0c660179 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22soc/intel/xeon_sp: Work around FSP-T not respecting its own APIArthur Heymans
The CPX FSP-T does not respect the FSP2.x spec and uses registers where coreboot has its initial timestamp stored. If the initial timestamp is later than some other timestamps this messes up the timestamps 'cbmem -t' reports as it thinks they are a result from a timestamp overflow (reporting that it took 100k years to boot). TEST: The ocp/deltalake boots within the span of a lifetime. Change-Id: I4ba15decec22cd473e63149ec399d82c5e3fd214 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/block/pmclib.c: Properly guard apm_control()Arthur Heymans
This function is only properly implemented with SMM support. Change-Id: I9e0fc7433a9226825f5ae4903c0ff2e0162d86ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/common/pmc.c Don't implement a weak function that diesArthur Heymans
Buildtime failures are better than runtime failures. Change-Id: I5fe4c86a13dbabb839977010f129419e337e8281 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/block/pmc: Only include the PCI driver when it is not hiddenArthur Heymans
On more recent Intel platforms FSP-S hides the PMC PCI device and the driver is broken for those devices so don't include it at all. Change-Id: I784be250698ec1c1e9b3b766cf1bcca55730c021 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/block/pmc: Move pmc_set_acpi_mode() to pmc_lib.cArthur Heymans
pmc.c mostly contains a PCI driver, while this function just calls into SMM. Change-Id: I9a93a5079b526da5d0f95f773f2860e43b327edf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/denverton_ns: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I261add8142c3192ab944845e8e1a362a3aca00c8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2020-11-22soc/intel/braswell/bootblock/bootblock.c: Report the FSP-T outputFrans Hendriks
Report the FSP temporary RAM location Tested on Facebook FBG1701 Change-Id: Ia2ce48f7a7948d1fe51ad1ca33b8fb385674cb41 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-20soc/intel/xeon_sp/cpx: Modify PCH_IOAPIC_BUS_NUMBERArthur Heymans
The PCH IOAPIC is not PCI discoverable. Linux checks the BDF set in DMAR against the PCI class if it is a PIC, which 00:1F.0 for instance isn't. The SINIT ACM on the other hand bails out with ERROR CLASS:0xA, MAJOR 3, MINOR 7 if the BUS number is 0. Change-Id: I9b8d35a66762247fde698e459e30ce4c8a2c7eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-20soc/intel/xeon_sp: Set coreboot defined IOAPIC and HPET BDFArthur Heymans
Don't rely on the FSP-S setting the HPET and IOAPIC BDF. This makes coreboot in control of these settings. Change-Id: I937ebf05533019cb1a2be771ef3b9193a458dddf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-20soc/intel/xeon_sp: Use common P2SB functions to generate HPET IOAPICArthur Heymans
Change-Id: I700df8fe5243db46fa8458757b4e5596c4b9f404 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-20soc/intel/apollolake: use P2SB function to generate DMAR IOAPICArthur Heymans
Change-Id: If088d5bf701310e54b14965145229627f3a50417 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-20soc/intel/common/block/p2sb: Add ioapic BDF functionsArthur Heymans
This allows to get/set the IOAPIC bus device function. Change-Id: Ib5bb409efbcbc5729cf0e996655c7ac3f6a78223 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47534 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/xeon_sp: Use common P2SB functions to generate HPET DMARArthur Heymans
This makes coreboot more robust as it does not need to rely on syncing values set by FSP and coreboot. Change-Id: I2d954acdb939e7cb92d44b434ae628d7d935d776 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47533 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/apollolake: use P2SB function to generate DMAR HPETArthur Heymans
Change-Id: I68f63c79d04cb2cddb92c9f6385459723f8858bd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47532 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/block/p2sb: Add hpet BDF functionsArthur Heymans
This allows to get/set the HPET bus device function. Change-Id: I8d72da8bc392aa144d167d31cde30cc71cd1396e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47531 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/p2sb: Add helper function to determine p2sb stateArthur Heymans
Change-Id: I1d6f9c18160806e289e98c2fa5d290c61434112f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47530 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/xeon_sp: Lock down DMICTLArthur Heymans
This is required for CBnT. Change-Id: I290742c163f5f067c8d529ddca8e2d8572ab6e6a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47449 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/xeon_sp/cpx: Lock down P2SB SBIArthur Heymans
This is required for CBnT. Change-Id: Idfd5c01003e0d307631e5c6895ac02e89a9aff08 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46499 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/xeon_sp/{skx,cpx}: Add txt_get_chipset_dpr callbackArthur Heymans
Change-Id: Id824324325d05b52fb2b9ced04fd3539cc37bd55 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46555 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/denverton_ns: Initialize thermal configurationJulien Viard de Galbert
Change-Id: I7e1b924154256f8f82ded3d0fa155b3e836d9375 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-20soc/intel/denverton_ns: Enable MC ExceptionJulien Viard de Galbert
Change-Id: I9773c61d06bb6c68612e498a35b5ad22cd5a8a6e Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-20src/soc/intel/denverton_ns: Use improvement in coreboot since 4.9Julien Viard de Galbert
- enable microcode in cbfs (won't boot without microcode) - force num fit entry to 1 to avoid crash in cbfstool/fit.c - re-enable FSP-CAR (tested to boot, while I couldn't boot with NEM) - enable io driver for uart in legacy mode (ie emulating legacy port by configuring the pci to legacy io address and hiding the pci device) Signed-off-by: Julien Viard de Galbert <julien@vdg.name> Change-Id: Ibc5ce91118c6052af23642fb3461f574cd888dea Reviewed-on: https://review.coreboot.org/c/coreboot/+/47340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2020-11-20soc/intel/common: Use per-soc definition for BAR sizesDuncan Laurie
The various platform BARs are not always the same size across different SOCs, so use the defined size rather than a hardcoded value. This results in the following change on TGL which increased the MCHBAR size to 128K: -system 00:00: [mem 0xfedc0000-0xfeddffff] has been reserved +system 00:00: [mem 0xfedc0000-0xfedc7fff] has been reserved And fixes the following error output from the kernel: resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:00 [mem 0xfedc0000-0xfedc7fff] Change-Id: I82796c2fc81dec883f3c69ae7bdcedc7d3f16c64 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-20soc/intel/common/block/cse: Clear post code before resetDuncan Laurie
To avoid "unknown post code 0x55" entries in the event log on cold boot clear the post code before doing the CSE initiated reset. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I68078c04230dbc24f9cc63b1ef5c435055aa1186 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-20soc/intel/tigerlake: Enable GPIO IOSTANDBY configurationDuncan Laurie
Enable SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY so the pads can be configured with non-zero IOSSTATE values. BUG=b:171993054 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I1f895dbdbb71a353a98272db6dc70b54e8e172a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47254 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/tigerlake: Expose UPD to enable Precision Time MeasurementDuncan Laurie
Expose a config option that allows enabling the FSP UPD which controls Precision Time Measurement for a particular PCIe root port. This UPD is enabled by default in FSP but interferes with achieving deeper S0ix substates so in order to prevent it from needing to be explicitly disabled for every root port this change makes disabling it the default and allows it to be enabled if needed. BUG=b:160996445 TEST=boot on volteer with PTM disabled by default for all root ports and ensure S0i3.2 substate can be achieved. Change-Id: Icb51b256eb581d942b2d30fcabfae52fa90e48d4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46856 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/tigerlake: Enable RTD3 driver and IPC mailboxDuncan Laurie
This SOC overrides the common PMC device and instantiates the PMC device in the SSDT. It needs to call the common PMC function to provide the IPC mailbox method. The common PCIe RTD3 driver can also be enabled which will allow mainboards to enable Runtime D3 power control for PCIe devices. BUG=b:160996445 TEST=boot on volteer with this driver enabled for the NVMe device in the devicetree and disassemble the SSDT to ensure the RTD3 code is present. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ifa54ec3b8cebcc2752916cc4f8616fcb6fd2fecc Reviewed-on: https://review.coreboot.org/c/coreboot/+/46261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-20soc/intel/common: Add PCIe Runtime D3 driver for ACPIDuncan Laurie
This driver is for devices attached to a PCIe root port that support Runtime D3. It creates the necessary PowerResource in the root port to provide _ON/_OFF methods for which will turn off power and clocks to the device when it is in the D3cold state. The mainboard declares the driver in devicetree and provides the GPIOs that control power/reset for the device attached to the root port and the SRCCLK pin used for the PMC IPC mailbox to enable/disable the clock. An additional device property is created for storage devices if it matches the PCI storage class which is used to indicate that the storage device should use D3 for power savings. BUG=b:160996445 TEST=boot on volteer device with this driver enabled in the devicetree and disassemble the SSDT to ensure this code exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I13e59c996b4f5e4c2657694bda9fad869b64ffde Reviewed-on: https://review.coreboot.org/c/coreboot/+/46260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
Replace the two obsolete LPID implementations with the new PEPD device. The PEPD device gets included in the plaforms' `southbridge.asl`, since it is required to load the `intel_pmc_core` module in Linux, which checks for the _HID. (See CB:46469 for more info on that.) There is no harm for mainboards not supporting S0ix, because the _DSM function won't be called with the LPS0 UUID on such boards. Such boards can use the debugging functionality of `intel_pmc_core`, too. Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi: add _HID to PEPDMichael Niewöhner
Add the _HID INT33A1 to PEPD to make Linux recognize it as "Intel Power Engine" in the pmc core driver. The _ADR gets dropped, because _HID and _ADR are mutually exclusive. Change-Id: I7a0335681f1601f7fd8a9245a3dea72ffd100b55 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46469 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi: correct return value for PEPD enum functionMichael Niewöhner
The PEPD enum function returns a bitmask to announce supported/enabled PEPD functions. Add a comment describing this bitmask and correct the return value to announce function 1, 5 and 6 as supported. Also add comments to the disabled functions 3 and 4. Change-Id: Ib523a54f5ad695e79005aba422282e03f2bc4bed Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: work around Windows crash on S0ix-enabled boardsMichael Niewöhner
Windows does not comply with the Low Power Idle S0 specification and crashes with an `INTERNAL_POWER_ERROR` bluescreen when function 1, does not return at least one device constraint, even when function 1 is announced as being not available by the enum function. Returning an empty package does not work. At least the following Windows versions were verified to be affected: - Windows 8.1 x64, release 6.3.9600 - Windoes 10 x64, version 1809, build 17763.379 - Windows 10 x64, version 1903, build 18362.53 - Windows 10 x64, version 2004, build 19041.508 - Windows 10 x64, version 20H2 / 2009, build 19042.450 To make Windows work on S0ix-enabled boards, return a dummy constraint package with a disabled dummy device. Since the device constraints are only used for debugging low power states in Linux and probably also in Windows, there shouldn't be any negative effect to S0ix. Real device constraint entries could be added at a later point, if needed. Note: to fully prevent the BSOD mentioned above the LPIT table is required on Windows, too. The patch for this is WIP, see CB:32350. If you want to test this, you need to applie the whole ACPI patch series including the hacky LPIT test implementation from CB:47242: https://review.coreboot.org/q/topic:%22low_power_idle_fix%22 Test: no bluescreen anymore on Clevo L140CU on all Windows versions listed above and S0ix gets detected in `powercfg -a`. Change-Id: Icd08cbcb1dfcb8cbb23f4f4c902bf8c367c8e3ac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: drop return value for disabled PEPD function 2Michael Niewöhner
PEPD function 2 is currently unused and disabled. Thus, drop the return value, which matches the default return value. Change-Id: Ia95b8b36fcb78e8976b66de15ec214a38c178cda Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-20soc/intel/common/acpi: rename PEPD/LPI macros for clarificationMichael Niewöhner
`ARG2` in the macro's names does not really provide any useful information. Drop it and add `LPI` to clarify the relation to only low-power idle states. Change-Id: I8d44c9e4974c7f34aa5c32ba00328725f536fda6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47247 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
Rename LPID to PEPD for consistency. PEPD means "Power Engine Plug-In Device" and is the name Intel and vendors usually use, so let's comply. Change-Id: I1caa009a3946b1c55da8afbae058cafe98940c6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46470 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: move S0ix UUID to the conditionMichael Niewöhner
Move the UUID to the condition, since there is no need to assign a name when it is only used once. Also add a comment to make clear that the functions inside that condition are only used by the Low Power Idle S0 functionality, while the PEPD in general can be present on boards without S0ix capability, too. For details check CB:46469. Change-Id: Ic62c37090ad1b747f9d7d204363cc58f96ef67ef Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46468 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: drop the southridge scope around PEPDMichael Niewöhner
PEPD will get included directly in the southbridge. Thus, drop the scope around it. Change-Id: Icb7a40e476966a7aca36bee055ee71d181508b87 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47246 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18soc/intel/common: Move CSE RW into new FMAP region to optimize boot timeSridhar Siricilla
CSE RW blob which will be used by coreboot to update CSE's RW partition, is packed part of FW_MAIN_A and FW_MAIN_B. This will increase the size of FW_MAIN_A and FW_MAIN_B. So, accordingly load and hash calculation of FW_MAIN_A (or FW_MAIN_B) increases during verstage. It increases the boot time by around 300ms. The patch address the boot time by pulling CSE RW blob outside of FW_MAIN_A and FW_MAIN_B. So, it creates new FMAP region within RW_SECTION_A and RW_SECTION_B and adds CSE RW blob in the new regions (ME_RW_A and ME_RW_B) as a CBFS file. Boot Time Measurement details when CSE RW blob is added in the ME_RW_A and ME_RW_B. -------------------------------------------------------- | Platform | Old Boot Time | New Boot Time | -------------------------------------------------------- | JSL | 1.3s | 1.06s | -------------------------------------------------------- | TGL | 1.63s | 1.36s | -------------------------------------------------------- Changes: 1. Makefile change to accommodate CSE RW blob into ME_RW_A/ME_RW_B 2. Kconfig change to define CBFS name and default file name for RW blob metadata. 3. CSE Lite Driver BUG=b:169077783 TEST=Verified on JSL & TGL platforms Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If043c9cb99fb822b62633591bf9c5bd75dfe8349 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Generate the CSE RW metadata and add to FW_MAIN_A/BV Sowmya
In the existing implementation CSE RW metadata file is generated by scripts and to avoid incompitable issues between coreboot and the scripts this patch adds the follwing changes, * Move the metadata generation to the coreboot Makefile. * Add CBFS component type struct to create a metadata file during the compile time. * Extract the CSE RW version from SOC_INTEL_CSE_RW_VERSION config and update the major, minor, hotfix and build versions using the compile time flags. * Compute the hash of CSE RW binary in hex format using the openssl and use the HASH_BYTEARRAY macro to convert the 64 character hex values into the array. * Add the me_rw.metadata cbfs file to FW_MAIN_A and FW_MAIN_B regions. BUG=b:169077783 TEST= Built for dedede. Verify that metadata file was generated and added to the FW_MAIN_A/B. Extracted it using cbfstool and verfied that metadata was generated properly. Change-Id: I412581400a9606fa17cf4398faffda923f07b320 Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig to enable the CSE FW Update featureV Sowmya
Add the Kconfig to enable the CSE FW Update feature and also to ensure all the configs are set by the mainboards to enable this feature. This config by default disables the CSE FW update feature for JSL and TGL platforms. It will be enabled after splitting and including the CSE RW and CSE RW metadata blobs in the CBFS. BUG=b:169077783 Change-Id: I12810031224f79aba8a4057725ae0ed5a9b36d7e Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig for CSE RW firmware versionV Sowmya
This patch adds a kconfig SOC_INTEL_CSE_RW_VERSION to pass the CSE RW firmware version from the mainboard. This will be extracted by makefile to update the cse_rw_metadata structure. Right now the required tool to extract the CSE RW version from the blob is still under development and after the official version of the tool is released, version will be extracted by parsing the CSE RW blob. BUG=b:169077783 Cq-Depend: chrome-internal:3402224, chrome-internal:3397863, chromium:2473603, chromium:2473603, chromium:2535950 Change-Id: I62691ee3ede7d4cd21f821381f5d1519f9061fd9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47430 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17soc/intel/xeon_sp: Fix SKX SATA drive boot issueMarc Jones
SKX FSP doesn't support X2APIC setup, but CPX does. The CPX DMAR table needs the X2APIC opt out flag set. This fixes the hang loading a kexec'd kernel. The change is easy to see in the coreboot output: [DMA Remapping table] Flags: 0x3 or in the DMAR ACPI table. Change-Id: Iec977c893b70e30875d9a92f24af009c1e90389e Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-16src: Update some incorrect config options in commentsMartin Roth
This is a trivial patch to fix some comments that were generating notes in the kconfig lint test. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I26a95f17e82910f50c62215be5c29780fe98e29a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47366 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/denverton_ns: Generate ACPI DMAR TableJulien Viard de Galbert
- Write ACPI DMAR Table if VT-d is enabled. - The entries are defined to follow FSP settings. Change-Id: I263b03b96280599266d4c5e193583ecdfe9697b7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25446 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/xeon_sp: Synchronize DMAR and MADT IOAPIC id'sArthur Heymans
Add a soc specific callback for getting the IIO IOAPIC enumeration ID. Tested on ocp/deltalake. Change-Id: Id504c2159066e6cddd01d30649921447bef17b12 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-16soc/intel/broadwell/systemagent.c: Rename to `northbridge.c`Angel Pons
Change-Id: Id1a0e02174456bb25df0721cfd3865645641a01a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-16lp4x: Add new memory parts and generate SPDsDavid Wu
This change adds the following memory parts to LP4x global list of available LP4x parts and to the global JSON file containing LP4x parts and their characteristics. 1. H9HCNNNCRMBLPR-NEE 2. H9HCNNNFBMBLPR-NEE 3. MT53D1G64D4NW-046 WT:A BUG=b:172751925,b:172781673,b:172782100,b:172781562 TEST=cd <path_to_coreboot_src>/util/spd_tools/lp4x && ./gen_spd <path_to_coreboot_src>/src/soc/intel/tigerlake/spd \ global_lp4x_mem_parts.json.txt "TGL" Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I37702770f707fe078920694468552c5db59c478f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47350 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/cnl: enable ACPI CPPC entries generationMichael Niewöhner
Enable CPPC entries generation, needed for Intel SpeedShift. Test: dumped SSDT from Clevo L140CU and checked decompiled version Change-Id: I0c8066a31d3bec27776836aac54c335c0e5d74e6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47541 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/common/block: add code for ACPI CPPC entries generationMichael Niewöhner
Copy the code for CPPC entries generation, needed for Intel SpeedShift, from SKL to common ACPI code. SKL is going to use common ACPI code, too, in the future, so this code duplication will vanish soon. Test: dumped SSDT from Clevo L140CU and checked decompiled version after enabling CPPC entries via Kconfig Change-Id: I1fcc2d0d7c6b6f35f8dd011f55dab8469be99d47 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45535 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/xeon_sp: Improve generating PCH IOAPIC MADT entryArthur Heymans
The PCH IOAPIC ID is 0x8 so it needs to be generated before the IIO IOAPICs. Since we will get rid of the ioapic_id array this makes it more readable. Change-Id: I64a3b259e438ef666fb68a433cceda10aebdb1bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
The option `HeciEnabled` was partly replaced by use of the device on/off state in the devicetree in commit 3de90d1. The option has been removed from the corresponding boards, so `HeciEnabled` is always 0 and ME always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM` is set. Replace the option in the finalize function by the same dt state check that sets the FSP option and drop the remaints of `HeciEnabled`. Devicetrees still having `HeciEnabled` have been adapted to keep the current behaviour. Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/tigerlake: Add code for early tcssBrandon Breitenstein
In order for USB Type-C idisplays to be detected prior to loading Kernel PMC IPC driver is needed to communicate with PMC in order to correctly set the USB Mux settings. This patch is adding in support for early detection of both Displays. BUG=b:151731851 BRANCH=NONE TEST=built and verified that TCSS MUX is being set on Volteer Change-Id: I58e66f21210d565fb8145d140d2fc7febecdd21a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42079 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/xeon_sp/acpi.c Loop over HOB stack for MADT generationArthur Heymans
To align MADT generation with DMAR, we loop over HOB entries instead of over copied HOB entries fetched from get_iio_stacks(). This makes it easier to see what is going on. Tested on ocp/deltalake Change-Id: I8ffe0322bb182b7ec5887354ec801e1f9f3d3288 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 09:46:59 +0000