summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2016-05-12soc/apollolake: Handle non-standard ACPI BAR in PMC deviceAlexandru Gagniuc
The ACPI BAR (BAR2 - offset 0x20) is not PCI compliant. That means that probing may not work. In that case, a resource still needs to be created for the BAR. BONUS: We now avoid the need to declare the MMIO resources as fixed. Change-Id: I52fd2d2718ac8013067aaa450c5eb31e00738ab9 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14634 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/intel/apollolake: Write LB_FRAMEBUFFER table when appropriateAlexandru Gagniuc
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to be done in platform code. Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/intel/common/mrc_cache: Don't assume FMAP is tied to CHROMEOSAlexandru Gagniuc
The old code only checked for an RW_MRC_CACHE region when CONFIG_CHROMEOS was selected. This assumption is not necessarily true, as one can have FMAP without a CHROMEOS build. As a result, always search FMAP first before falling back on CBFS for locating the MRC cache region. The old logic where CHROMEOS builds would fail when RW_MRC_CACHE was not found is preserved, such that behavior does not change. Change-Id: I3596ef3235eff661af055968ea641f3e9671cdcd Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14757 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/apollolake/uart.c: Do not NOOP .set_resources() and friendsAlexandru Gagniuc
When SOC_UART_DEBUG was not set, the boot would hang somwhere in ramstage, as evidenced by POST codes reported from the EC. This was traced to the .set_resources and .enable_resources members of the UART PCI driver being set to NOOP. Although the exact mechanism of failure is not known, this change eliminates the hang. Change-Id: Ic2f3d56a964ec890ebfa1e1a7770f1ae2eb22281 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14771 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-11soc/intel/quark/include/soc: Update the Intel licenseLee Leahy
Remove the phrase "which accompanies this distribution" from the license. Re-format the license to fit in 80 columns. TEST=Build and run on Galileo Gen2 Change-Id: I8d893cf1270b95b27eab7142b276ebfce24ec2ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14774 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10intel/common/mma: override SAGV to fixed high for MMA testsPratik Prajapati
Set SAGV to 2 (Fixed High) so that MMA test would stress memory at high freq point. MMA tests does not support stressing memory at both high and low points. BRANCH=glados BUG=chrome-os-partner:43731 TEST=Build and Boot kunimitsu and ran MMA tests. Change-Id: I0b2f6cf9955076f6146b957c4d40fe24e6c3f0e7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b16b756d9a74c9111c78fce848b059daee65669 Original-Change-Id: I4c4a59407844e1986fa2cf3a0035aff1d8529cf9 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339002 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-(cherry picked from commit c43d9880fe4efd1e1bb853d35140424fb7dd7e99) Original-Reviewed-on: https://chromium-review.googlesource.com/338847 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10util/mma: changing BOOT_STUB to COREBOOT region and few more thingsPratik Prajapati
(1) Added following new function. cbfs_locate_file_in_region - to locate (and mmap) a file in a flash region This function is used to look for MMA blobs in "COREBOOT" cbfs region (2) mma_setup_test.sh would write to "COREBOOT" region. (3) changes in mma_automated_test.sh. Few MMA tests need system to be COLD rebooted before test can start. mma_automated_test.sh would do COLD reboot after each test, and so i would sync the filesystem before doing COLD reboot. BRANCH=none BUG=chrome-os-partner:43731 TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS Not tested on Glados. Change-Id: I8338a46d8591d16183e51917782f052fa78c4167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4 Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331682 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14125 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10soc/intel/apollolake: remove errant semicolonAaron Durbin
Remove a semicolon which shouldn't be there. Change-Id: I38f785fa13ea9fee91813f165a085ff54e1b75fb Found-by: Coverity Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14755 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-09soc/intel/apollolake: Select no stage caching for resumeFurquan Shaikh
Select NO_STAGE_CACHE so that ramstage is not cached for resume. Change-Id: I9ca71686e0f617bb24713ec9ba07b5255c218f66 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09soc/apollolake/pmutil: Get PMC base address dynamicallyAlexandru Gagniuc
Instead of using a hardcoded address for PMC device BAR0, read it dynamically. This allows the allocator to move the BAR without needing a fixed resource. Note that we cannot do the same for the ACPI BAR (index 0x20), as it cannot be read back. Change-Id: If43e1ccb693ffb17b78bdd76140a0849493a0010 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14633 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09soc/intel/quark: Identify the console UARTLee Leahy
Pass the UART identifier to CorebootPayloadPkg Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: I9db1c31c3544d56b66f5a79ac8c3acee41788983 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
Command List: Send command for PS4 exit fails BUG=chrome-os-partner:52355 BRANCH=glados TEST=Build and boot lars and verify no hang during active idle CQ-DEPEND=CL:*257305 Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368 Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341330 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14688 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09soc/intel/skylake: Output more ME status informationDuncan Laurie
Output a few more status bits from HFS/HFS2 and add some interesting bits from HFS3. BUG=chrome-os-partner:52662 BRANCH=glados TEST=boot on chell and verify ME status output Change-Id: I989b680f203678dbe28559e858faf8b4e0837481 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ea34ab019da3fff965102bcef5158ddcc154728 Original-Change-Id: Iff977c8d85b4d4dfa00b5b19bc29d11813a99b9f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340390 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/14687 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-09xip: Do not pass --xip for early stages if CAR supports code executionFurquan Shaikh
On modern x86 platforms like apollolake, pre-RAM stages verstage and romstage run within the cache-as-ram region. Thus, we do not need to pass in the --xip parameter to cbfstool while adding these stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is default false for all x86 platforms. Apollolake selects this option since it supports code execution with CAR. Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/apollolake/lpc: Allow configuring SERIRQ via devicetreeAlexandru Gagniuc
Every other SOC uses a CONFIG_* flag to enable or disable SERIRQ continuous mode. Why they do that is beyond me, but the way we implement it on apollolake is via devicetree. Change-Id: I6e05758e5e264c6b0015467dd25add3bffe2b040 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc_lib: Add utility to configure LPC padsAlexandru Gagniuc
Change-Id: Iaf325863681ad9b8b5d7662a9d267488b8fdf008 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14587 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc: Open I/O to LPC based on resource allocationAlexandru Gagniuc
Besides a number of fixed memory windows, Apollolake supports opening a configureable 64 KiB MMIO window, as well as four PMIO windows to the LPC bus. Open up these windows dynamically, based on how resources were allocated to the child LPC devices. Change-Id: I170e861693cb6fd1be38889adc951f197a13460f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14584 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06Revert "soc/intel/apollolake: Enable LPC bus interface"Alexandru Gagniuc
This reverts commit e976bd44692d2adb320a1256f1b6bfaa6469108a. The LPC resource allocation will be completely reworked in subsequent patches. The most straightforward approach is to start by reverting the existing code. Change-Id: I2475542b79817020d4c956f22ed5856f05046b16 Reviewed-on: https://review.coreboot.org/14583 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/intel/apollolake: fix incorrect bdsm -> tolud memory resourcesAaron Durbin
The wrong base address was being used for the region of memory between BDSM and TOLUD. This resulted in a very large reserved region starting at TOLUD instead of BDSM. Change-Id: I41d06267ffa93ea47aa059f4ddb7b9c349e51583 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14628 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/intel: indicate to build system that XIP_ROM_SIZE isn't usedAaron Durbin
The XIP_ROM_SIZE Kconfig variable isn't used for these chipsets. Therefore, indicate as such so that romstage can be placed in cbfs less rigidly. Change-Id: If5cae10b90e05029df56c282e8adf37fa0102955 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14626 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06{cpu,soc}/intel: remove unused smm_init() functionAaron Durbin
There used to be a need for an empty smm_init() function because initialize_cpus() called it even though nothing called initialize_cpus(). However, garbage collection at link time is implemented so there's no reason to provide an empty function to satisfy a symbol that is completely culled during link. Remove it. Change-Id: Ic13c85f1d3d57e38e7132e4289a98a95829f765a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14605 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/skylake: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I5c4674ed258922b6616d75f070df976ef9fad209 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14597 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/broadwell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I74c81c5d18dff7a84bfedbe07f01e536c0f641fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14595 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/apollolake: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/braswell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I65beefec53a29b2861433bc42679f3fa571d5b6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14593 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/fsp_broadwell_de: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I2a7c628cfae7cf6af6e89fa8fc274f59127ff7c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14592 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-05-06soc/intel/apollolake: Correct PCI write size in romstageFurquan Shaikh
1. PCI command reg write should be 16-bit. 2. HPTC reg write should be 8-bit. Also, use macros instead of hard-coded values. Currently, the macros are defined in romstage.c, but if more P2SB macros are added, it would be good to move them to a separate header file. Change-Id: Iad1eb6a95467a41ecf454092808d357425c4c2fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14613 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-05soc/intel/quark: Add script time delay supportLee Leahy
Add time delay support to the scripts. TEST=Build and run on Galileo Gen2 Change-Id: I2c87977e2a2547e00769e59e1ee81fbbb5dff33f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-05soc/intel/quark: Add temperature sensor supportLee Leahy
Migrate the temperature sensor support from QuarkFspPkg into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: I6dc68c735375c9d1777693264674521f67397556 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14565 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/intel/quark: Add USB PHY initializationLee Leahy
Add register access support using register scripts. Initialize the USB PHY using register scripts. TEST=Build and run on Galileo Gen2 Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/apollolake: Set BootMode based on previous sleep stateRavi Sarawadi
- fill_power_state makes a copy of the current snapshot of power management registers in CAR variable "power_state" for use in ramstage - migrate_power_state adds CAR variable "power_state" to CBMEM (CBMEM_ID_POWER_STATE) - s3_resume state is updated in romstage_handoff block Change-Id: I842b85c5e562893b58cd3b3f6432695fbd4430bf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/14550 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-04soc/apollolake/romstage: Do not cast const to non-const pointersAlexandru Gagniuc
That was a workaround for the MRC cache API, which has since been reworked. The workaround is no longer needed. Change-Id: I1c1883f3ea37245615248459cd993ed774bf92de Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14574 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-04soc/intel/common/mrc_cache: Honor MRC data as a constant pointerAlexandru Gagniuc
The MRC cache API has absolutely no reason to modify the data it is asked to stash. Reflect that by taking all "data" parameters as const void *. Change-Id: I7a14ffd7d5726aa9aa5db81df82c06e7f87b9d9f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14250 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-04soc/intel/fsp_baytrail: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I709ea938b720f26b351a1f950593efe077edb997 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14581 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-05-04soc/intel/baytrail: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I5c5d678d7adb4c489752cca80b20f785ec8749d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14580 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-04cpu/x86: remove BACKUP_DEFAULT_SMM_REGION optionAaron Durbin
Unconditionally provide the backup default SMM area API. There's no reason to guard the symbols behind anything since linker garbage collection is implemented. A board or chipset is free to use the code or not without needing to select an option. Change-Id: I14cf1318136a17f48ba5ae119507918190e25387 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14561 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04broadwell/me: Fix out-of-bounds array access errorEvan Lojewski
Fix an issue where a broadwell machine without the ME installed could result in an invalid status code being reported. For certain values, this would result in the intel_me_status function never returning. Fix has been tested on a samus board w and w/o the ME blob installed. Change-Id: I96667d3b89393f161e4d4efe0544efac98367e6c Signed-off-by: Evan Lojewski <meklort@gmail.com> Reviewed-on: https://review.coreboot.org/14409 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-03soc/intel/quark: Add IntelQNCConfig.h from EDK-IILee Leahy
Add the EDK-II Quark file IntelQNCConfig.h. This adds the definitions for the temperature sensor. TEST=Build and run on Galileo Gen2 Change-Id: I70896e6187b878ea572535432912f1d4db895a99 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14497 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03intel/baytrail: use fmap information for code cachingPatrick Georgi
Instead of using CBFS_SIZE from Kconfig, use values generated from fmap. While at it, make sure that the cached region size is a power of two. fmap_config is also added to cpu_incs-y, but that doesn't hurt (except for some miniscule increase in compile time) because it's #if-guarded. The upside is that dependencies are tracked properly. Change-Id: I03a919e1381ca3d0e972780b2c7d76c590aaa994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14573 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-02soc/intel/quark: Remove UPD parametersLee Leahy
Remove the UPD parameters to match QuarkFsp code. TEST=Build and run on Galileo Gen2 Change-Id: Ie4639d1f087cc2bc4387aa691eb66b640fe8faf9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14451 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02cpu/x86/mp_init: remove unused callback argumentsAaron Durbin
The BSP and AP callback declarations both had an optional argument that could be passed. In practice that functionality was never used so drop it. Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14556 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-30lib/reg_script: Allow multiple independent handlersLee Leahy
Remove the platform_bus_table routine and replace it with a link time table. This allows the handlers to be spread across multiple modules without any one module knowing about all of the handlers. Establish number ranges for both the SOC and mainboard. TEST=Build and run on Galileo Gen2 Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-30soc/apollolake: Prevent PMC BAR reassignment during resource allocationHannah Williams
Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-29soc/intel/apollolake: clarify Fast SPI CS2 pad configurationAaron Durbin
The pad for CS2 of the Fast SPI interface needs to be configured for automatic MMIO translation when a SPI TPM is utilized. Instead of unconditionally configuring that pad under LPC_TPM provide a explicit Kconfig for a mainboard to select. Change-Id: Ia94b90e12d71a4b849359188a853f7e036cc583b Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/14531 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-04-28fsp_baytrail: Fix missing "$" when using Kconfig switchWerner Zeh
To include gfx.c in ramstage, there is a Kconfig option (FSP_BAYTRAIL_GFX_INIT) which can be activated on demand. Unfortunately, the "$"-character is missing so that this switch is never active. Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Add handling of GNVS ACPI entry for CHROMEOS buildsLance Zhao
Add chromeos required GNVS feature. The GNVS table stays in both CBMEM and ACPI DSDT tables. Change-Id: I4db0eb18d2de62917a94704318a7896c04e4777f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Add GPIO devicesZhao, Lijian
Add GPIO controller in ACPI device description. GPIO controller driver is probed in kernel and all the pins in the banks are showing respective values. Change-Id: I0512cfec872113b15fd204ec3b95efeac87f694a Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14478 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Add cache for BIOS ROMAndrey Petrov
Enable caching of BIOS region with variable MTRR. This is most useful if enabled early such as in bootblock. Change-Id: I39f33ca43f06fce26d1d48e706c97f097e3c10f1 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14480 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-28soc/intel/apollolake: Enable LPC bus interfaceAndrey Petrov
This adds early LPC setup in bootblock (for Chrome EC) as well as late (ramstage) IO decode/sirq enable. Change-Id: Ic270e66dbf07240229d4783f80e2ec02007c36c2 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Freddy Paul <freddy.paul@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14469 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Enable RAM cache for cbmem region in ramstageAndrey Petrov
Use postcar infrastructure to enable caching of area where ramstage runs. Change-Id: I3f2f6e82f3b9060c7350ddff754cd3dbcf457671 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14095 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Fix northbridge _crs scopeZhao, Lijian
Move _CRS scope from MCHC device only to whole pci root bus. Otherwise ACPI will not able to assign resource to devices other than MCHC. Change-Id: Iaa294c63e03a4fc6644f1be5d69ab3de077e6cc3 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14477 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Configure a GPIO for TPM in bootblockAndrey Petrov
One of devices connected to FAST SPI bus is TPM. SoC uses dedicated line for chip select for TPM function. If TPM is used, that line needs to be configured to a specific native funciton. Change-Id: Ib5bf4c759adf9656f7b34540d4fc924945d27a97 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14467 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Avoid marking 0xe0000-0xfffff region usableAndrey Petrov
coreboot writes RDSP at 0xf0000. Since depthcharge wipes usable memory regions before starting, kernel can't find RDSP. Change-Id: I584bd5d24248cf38f46342615cf3b0252a821b2a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14466 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Actually include ACPI PCI IRQ definitionsAndrey Petrov
Without ACPI PCI IRQ definitions kernel is left only with informaiton available in PCI config space, which is not sufficient. Change-Id: I3854781049851b5aa5b2dbf3257ece2fee76c3e2 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-22soc/intel/quark: Fix MTRR readsLee Leahy
Remove offset override improperly added in the "Disable the ROM shadow" patch TEST=Build and run on Galileo Gen2 Change-Id: I32fb2da48e3769d59a49619539053f9afdf63b04 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14450 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22soc/intel/quark: Fix uninitialized variable d_variantLee Leahy
Initialize the d_variant variable. Found-by: CID 1353356 Uninitialized variable TEST=Build and run on Galileo Gen2 Change-Id: I26fba4e77f91d53b6ff9028669aa0186d3174639 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14338 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22soc/intel/apollolake: Flush L1D to L2 only if loaded segment is in CARFurquan Shaikh
In program_segment_loaded, flush L1D to L2 only if the address of the loaded segment lies in the CAR region. Add an assert to ensure that the loaded segment does not cross CAR boundaries. Change-Id: Ie43e99299ed82f01518c8a1c1fd2bc64747d0c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14449 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-21soc/intel/apollolake: Set default memory type to uncacheableFurquan Shaikh
Set the default memory type in MTRRCap register to 0. This ensures that even if the MTRR Enable bit is set in MTRRCap register, the default memory type is still uncacheable. Change-Id: I63e7993f8b65dabbab60e7c1bb8d6d89ef4da9ee Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14428 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-20intel/fsp_broadwell_de: fix SPD CBFS file typeStef van Os
File type for SPD in this soc is defined as CBFS_TYPE_RAW in Makefile, but CBFS_TYPE_SPD in code. Causes DDR SPD not to be loaded on memory down. Tested on Prodrive Technologies Broadwell-D 1548 module: http://prodrive-technologies.com/amc-ix5-intel-broadwell-de-platform/ Change-Id: I44525b4742b3f93d33f0c5bd9ed642c6fb06f23f Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com> Reviewed-on: https://review.coreboot.org/14415 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: York Yang <york.yang@intel.com>
2016-04-20soc/intel/apollolake: add definitions for direct IRQBora Guvendik
Change-Id: Ife26f5cf6a06a1a5bf965bbeed7a740a990e8f7f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14399 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20mainboard/amenia: add the inital files for amenia boardZhao, Lijian
Add amenia board files Change-Id: I6731a348b4c0550d3b9381adb5fb83719f90a5da Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14352 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-20soc/intel/apollolake: configure interrupt trigger modeJagadish Krishnamoorthy
Provide trigger option to configure APIC, sci, smi, nmi interrupts. Change-Id: I1b553fb4ed1b43aba62346f5b758f8d082606510 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/14353 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-18soc/intel/apollolake: Do not re-save BIST resultFurquan Shaikh
BIST result is already stored by arch/x86/bootblock_ctr0.S in mm0. Also, eax does not contain BIST result by the time control reaches bootblock_pre_c_entry. bootblock_crt0.S saves timestamp in mm2 which was being overwritten here. Thus, remove the saving of BIST result from SoC code. Change-Id: I65444689cf104c59c84574019f5daf82aab10bc7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14381 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-17broadwell_de_fsp: Select HAVE_INTEL_FIRMWAREWerner Zeh
By selecting this switch in Kconfig one can build complete rom image including descriptor and ME/TXE. Change-Id: I7307695008df9a61baba1eb024f1f48be62c53c8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14376 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-16intel/fsp_baytrail: Eliminate warning about missing set_resourcesBen Gardner
In northcluster.c, the set_resources member of struct device_operations is set to NULL. That causes this message on the console: PCI: 00:00.0 missing set_resources Eliminate that warning by setting set_resources=DEVICE_NOOP. Change-Id: I4c6c07fd40b180ca44fe67c4a4d07318df10c40f Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14366 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-16intel/apollolake: Fix whitespace issuesMartin Roth
Change-Id: Ia5bcd19d994e23375d7e6d2050113c809ae57296 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14368 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-15intel/apollolake: Fix logic errorPatrick Georgi
Testing dev->chip == NULL when dev == NULL doesn't make sense (and gcc thinks that's undefined behavior which should be rewarded with a trap). Change-Id: I801ce3d6b791fdf96b23333432dee394aa2e2ddf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14360 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-15intel/fsp_baytrail: fix whitespace issue in romstage.cBen Gardner
Change-Id: Ibb36292bb2fd40aa453dba1d9ce821f3e1e7a823 Reviewed-on: https://review.coreboot.org/14354 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-04-15soc/apollolake: Add helper functions to access Power Management RegistersHannah Williams
Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-15soc/intel/apollolake: Fix northbridge _CRSZhao, Lijian
Fix build break on current _CRS method with correct scope. Change-Id: I75ba8abc547ec69be0a0950e23a7c31b447af31e Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14288 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-14soc/apollolake: Add ACPI platform sleep capabilityHannah Williams
Change-Id: I6854f410b4d3847238f0253b7fbb9bbe8f9da395 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14282 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-14soc/intel: Add Broadwell-DE SoC supportYork Yang
Initial files to support Broadwell-DE SoC. This is FSP 1.0 based project and is based on Broadwell-DE Gold release. Change has been verified on Intel Camelback Mountain CRB. Change-Id: I20ce8ee8dd1113a7a20a96910292697421f1ca57 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/14014 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-13soc/intel/apollolake: Add tsc_freq.c to all the stagesAndrey Petrov
Change-Id: I3120a52e21cf4ad03bb1d16b5b2b8a5e68aabf3f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14339 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-13soc/intel/apollolake: Update platform-specific FSP headersAndrey Petrov
This updates FSP UPD headers that adds new fields. Importantly there are new FSPS UPD fields that allow to specify some BARs. They are needed by FSP SiliconInit API to work properly. Change-Id: Ie268c57c66b4d8fd6e00835916004058ff05762e Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14217 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-13soc/intel/apollolake: Reserve IMRs (Isolated Memory Regions)Andrey Petrov
Certain security features on the platform use IMRs. Unfortunately this memory is unusable for OS or firware. This patch marks IMR regions as unusable. Change-Id: I4803c41c699a9cb3349de2b7e0910a0a37cf8e59 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-13soc/intel/apollolake: logically group PMC BAR programmingAaron Durbin
The ACPI base address was being programmed sepearately from the other BARs in the PMC device. Group all the programming together so there isn't separate paths for programming the relevant BARs. Change-Id: Ib17684397fc19c42b39d066f981c01a886d65235 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14320 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-13src/soc/intel/common: Fix CID 1295499, remove dead codeLee Leahy
Restructure the nvm_is_write_protected routine to eliminate the dead code error. TEST=Build and run on Kunimitsu Change-Id: Ia9170e27d4be3a34760555c48c1635c16f06e6a3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14337 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-11soc/intel/apollolake: Fill _PRT entry in DSDTZhao, Lijian
ACPI aware OS will need _PRT table to get desired interrupt resource assigned and make device driver working. The logical device within SOC gets fixed interrupt line. Change-Id: I75141bd62ca2594b74983dff54912e0b20458b9a Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14243 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/intel/apollolake: Add lpss dsdt entryZhao, Lijian
Add southbridge and LPSS device DSDT table. Change-Id: I0607398408900d8c5d543ecd5e5d4830d2a70bf1 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14218 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-11soc/apollolake/acpi: Fill ACPI HPET tableZhao, Lijian
HPET table is required to report integrated HPET timer to kernel. Without HPET table added,Linux kernel will panic when loading timer driver. Change-Id: I7368bc29f4e03d5882dcfc4a770fa7bfbc6c26a0 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13374 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/apollolake: Add lpc device driverLance Zhao
A dedicated pci device driver required for LPC devices as the legacy IO range need to be included to avoid IO resource confilict. Blindly set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD and LPC.Without this driver system will have assertion on load RTC DXE driver in UEFI payloads. Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/apollolake/acpi: Fill in ACPI MADT tableLance Zhao
ACPI MADT tables required to describe the multiprocessor interrupt routing. Apollolake SOC also have the interrupt override table like other x86 silicons. Change-Id: I85976e227963c950aad4476d68581b96e1090559 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13373 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-11soc/intel/apollolake: Enabling using of MRC data when availableAndrey Petrov
Change-Id: Iee30a6efb8dcdd04affd5d1105a254781287e9e4 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14253 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-11soc/intel/apollolake: Enable CACHE_MRC_SETTINGSHannah Williams
This enables CACHE_MRC_SETTINGS by default as well selects timer configuration. Change-Id: I0248001892ef763c39097848b5adc8c1befed1f0 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14252 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/apollolake/acpi: Fill ACPI MCFG tableLance Zhao
ACPI MCFG table is required for OS to support Enhanced Configuration Space Access.Apollolake will only support 1 PCI Segment Group, so all the pci bus number from 0 to 0xff will belong to that group. Change-Id: I3a680eb9c83290cd531159d7e796382a132cd283 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13375 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-11soc/intel/apollolake: Implement SPI controller driverAlexandru Gagniuc
Implement flash read, write, and erase functionality using the hardware sequencing capabilities of the SOC. Due to changes in hardware requirements, the flash chip must be probed differently than on previous platforms (details explained in comments). Note that this is a minimal implementation, and does not provide all the bells and whistles. Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-11cpu/x86/tsc: compile same code for all stagesAaron Durbin
The delay_tsc.c code took different paths depending __PRE_RAM__ being defined or not. Also, timer_monotonic_get() was only compiled in a !__PRE_RAM__ environment. Clean up the code paths by employing CAR_GLOBAL for the global state which allows the same code to be used in all stages. Lastly, handle apollolake fallout now that init_timer() is not needed in placeholders.c. Change-Id: Ia769fa71e2c9d8b11201a3896d117097f2cb7c56 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14301 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-08soc/intel/apollolake: Override default to_flash_offset implementationAlexandru Gagniuc
The default nvm_mmio_to_flash_offset() implementation used by NVM code in intel/common does not work on apollolake. As a result, provide the correct override. Change-Id: I01a94f90dfdd33586a4aac5c05dd8c73e8804437 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14248 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-08soc/intel/common/nvm: Allow overriding to_flash_offset() functionAlexandru Gagniuc
On apollolake, the flash is memory-mapped differently, and the default MMIO to flash calculation does not produce correct results. While the long-term solution is to rewrite the NVM functionality to keep the flash offset as part of its context, as a temporary measure, allow overriding the to_flash_offset() function by declaring it weak. Change-Id: Ic54baeba2441a08cfe1a47e235747797f6efb59b Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14247 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-05soc/intel/apollolake: Fill ACPI FADT tableLance Zhao
Fill the ACPI FADT table base on apollolake SOC definition. Change-Id: Ib7226a3b130f14810dc2af5ca484cef58f477063 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13352 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-04soc/intel/apollolake: Fill northbridge ASLZhao, Lijian
Northbridge resource assignment: Dynamicly update memory resources for northbridge devices, exclude any fixed MMIO resources. Change-Id: I9595f9a12434fa423862836d19f7266d6023fc5a Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13371 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-02soc/intel/apollolake: use platform_segment_loaded() for CAR coherencyAaron Durbin
Instead of using arch_segment_loaded() implement platform_segment_loaded() so as not to tangle the notion of arch and the chipset. Lastly, add a TODO to allow filtering of the L1D to L2 flush depending on the region loaded. Change-Id: I52e7cd2ae6e2d95f21bdd2fe1a471a10565309cb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02soc/intel/apollolake: use arch_segment_loaded() for CAR code coherencyAaron Durbin
Instead of using platform_prog_run() for flushing programs from L1D to L2 for code coherency purposes use arch_segment_loaded() instead as that it's primary purpose. The arch_segment_loaded() is called within the infrastructure at the appropriate places when loading programs. Therefore use that to perform the L1D flush instead of when something is just about to run. Change-Id: Ib0a6be6f676dcf2c946ef5702471af65d89133e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14212 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02soc/intel/apollolake: use CAR code coherency for all CAR stagesAaron Durbin
The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-01soc/intel/apollolake: Fix MMIO reserved ranges calculationAndrey Petrov
mmio_resource() takes memory address in kilobytes. This patch adds resources properly. Change-Id: Id78dcecf05ad5b2c84e5bb5445ae3a4e4ec9d419 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14203 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-29intel/skylake: Enable PROCHOTPratik Prajapati
This patch would enable PROCHOT feature in skylake. Asserting PROCHOT line would throttle the GPU/CPU. BUG=chrome-os-partner:51142 BRANCH=glados TEST=manually tested on lars. asserting PROCTHOT by EC reduces FSP in fish-tank from approx 40 to 20. (50 fish setting), also CPU freq. drops to from 1600000 to 400000 Change-Id: I8fc0c015ea2c26d20bbbfc619f720f231d540feb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1b88b1f183df9c7362d7e58acb0a1fa0b076d56e Original-Change-Id: Ida8636efc3d8da56ebd3931144d31ab1b88fe806 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331690 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-(cherry picked from commit d091a999c3827179182b62a1274a9b3581f7f006) Original-Reviewed-on: https://chromium-review.googlesource.com/333073 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14120 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-25intel/fsp_baytrail: Fix I2C abort logicBen Gardner
A call to i2c_read() for a non-existent address followed by an i2c_read() to a valid address results in a false abort status for the 2nd call. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT) Because the abort status register is cleared on read and wait_tx_fifo() reads it twice, the returned status does not contain the abort status. Fixing that changed the 2nd read to reflect the abort status. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT) Bit 0 indicates that the address was not acknowledged by any slave. That's the abort status from the previous transaction. So I added a read of the abort status before starting a transaction in both i2c_read() and i2c_write(). i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS) Tested on a Bay Trail E3845 SoC. Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-03-25intel/fsp_baytrail: Use read32() and write32() in i2c.cBen Gardner
i2c.c uses "*(volatile unsigned int *)" constructs where it could use read32() and write32(). Switch to using read32() and write32(). The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed in https://review.coreboot.org/#/c/14160/ Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe (intel/fsp_baytrail: Fix I2C abort logic) I also fixed a few minor white space issues. Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14162 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 19:43:03 +0000