| Age | Commit message (Collapse) | Author |
|---|
|
This patch converts below chip configs from camel case to snake
case to match with the other chip configs belongs to the chip
structure.
- SaGv
- RMT
Additionally, updated the `sagv` help text and operation as
applicable based on the FSPMUPD.h file (belongs to the vendorcode).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I62e521cf3f46e888e2c995d83ac7dc666de1af82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch implements an API named `pmc_clear_pmcon_pwr_failure_sts()`
to clear power failure status bits of PMC General PM Configuration A/B
based on the underlying SoC.
Based on the available PMC register definitions between Sky Lake till
latest Meteor Lake platform, the SoC platform that selects
SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION config has power failure bits
mapped into the MMIO mapped GEN_PMCON_A register where else for the
other SoCs, those power failure bits are belongs to the PCI config
space mapped GEN_PMCON_B register.
BUG=b:265939425
TEST=Able to build the google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icbbe47ccfd489edf9c38f52bdf7cf2de7aa9eedf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72053
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Some boards may want to perform a specific operation before the CSE FW
update final operation begins. For instance, on Brya this new callback
can be used to inform the end-user that an update is in progress.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=Compilation success
Change-Id: Ia4d32a71f3ae61d2e24197fee6b458512f7778a9
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72097
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a CSE update is going to happen and early graphics is supported by
the mainboard, an on-screen text message is displayed to inform the
end user.
CSE update can take a while and an impatient end user facing a black
screen for a while may reset the device unnecessarily.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=On screen text message during CSE update observed on skolas
Change-Id: I28c4fef9345d577be287b76a2a767b5c852ec742
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72098
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 80b1fa33.
Reason for revert:
"Error: CONFIG() used on unknown value (ENABLE_FSP_ERROR_INFO) at src/soc/intel/xeon_sp/romstage.c:20"
Change-Id: I843322fc9d7ebbc30e9209ae933313f2668bfa40
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Provide D-states to enter LPM (S0ix) for MTL
Values were copied over from corresponding ADL file (as MTL data
sheet is not yet available).
TEST=Built and tested on Rex by verifying SSDT contents
Change-Id: If367511a29726669fe25ad2124e2f9b877a31ee8
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3138edd8125601b6c9dff5f9252a4bba8385146d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
For SPR-SP FSP MRC cache, NO_FSP_TEMP_RAM_EXIT should not
be selected.
Change-Id: I63101f286809d6cebb9a7d74443446cb3fe650c4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71928
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
After calling FSP MemoryInit API, if there is an error, some FSPs
(such as SPR-SP FSP) is capable of generating FSP_ERROR_INFO_HOB.
Check existence of such a HOB and handle it accordingly.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I612393ffac90815606f3f2544bc1518f6912e605
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71952
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
DEFAULT_SOFTWARE_CONNECTION_MANAGER
Needs to be selected for ChromeOS mainboards even for non-ChromeOS
builds, else Thunderbolt/USB4 doesn't work under Windows (and likely
Linux as well).
TEST=build/boot Windows on drobit/banshee, verify TB functional
Change-Id: Iee3f99840f0c6cc384d9fdef6dff55bcbfc0380f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Possible Buffer Overflow - Array Index Out of Bounds. Array
regions size is 256 but 'i' iterates from 0 to 256.
Found-by: Klockwork
BUG=None
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee45a5821b9dd3f9e6f9816599beebf34555426d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72049
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the APL EDS vol 1 (doc 569262) to be able to implement common
code API to clear the power failure status bits.
Note: as per the EDS those newly added power management failure bits
are RO and shouldn't change any functionality of the existing APL SoC
code. The reason behind adding those macro definitions is to fix the
compilation issue due to code change targeted for the Intel SKL and
Xeon-SP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0bbf11ada2b2f8735173be69ad157b8055021126
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72130
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the DNV EDS vol (doc 558579) to be able to implement common
code API to clear the power failure status bits.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6ed962eae79154a8faea382dbe8367133cb05eda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: Ib5ff87e2f6524ca1be69027080149a3fbe2df7d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72158
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: I9a55e1b099a53180e40eedcc52120d65558e7f8b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72157
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia8d35a5d104658b7900fde7f7b8c6f88530a614e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72129
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If44a07503470f57037b59d03eea830703a3c604a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72100
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8432d799c9bf23058b7b903bb07f6c2b4308eeba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72103
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id2b408e24f74367777b1b949623d6692f2f19e6d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72076
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to
control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always
disabled for ChromeOS platforms.
This made skip_mbp_hob SOC chip config variable redundant
which is also removed as part of this change.
BUG=none
TEST=Build and boot to Google/Rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Iaba1ea29a92a63d2b287e1ccdea1a81ec07b9971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently most of the FSP debug messages (when enabled) are truncated
due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer
size to 0x100000 bytes so that cbmem buffer can contain most of the
debug logs when FSP debug messages are enabled.
BUG=b:265683565
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled
but MRC debug message.
Note: Still 350/2200 lines of premem messages are missing.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I120423e1dd2bc468cf9cec6da1246ac3c0a155e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72048
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug logs which is more than 166KB hence, cbmem console buffer has wound off to contain the maximum possible debug messages within the allocated buffer as results, we are seeing truncated debug message while looking into the cbmem console.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
BUG=b:265683565
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ibeabb61d60491b831252b7161c9d3181fbe09e73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72047
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Ice Lake is unmaintained and the only user of this platform ever
was the Intel CRB (Customer Reference Board). As it looks like, it was
never ready for production as only engineering sample CPUIDs are
supported.
As announced in the 4.19 release notes, remove support for Intel
Icelake code and move any maintenance on the 4.19 branch.
This affects the following components and their related code:
* Intel Ice Lake SoC
* Intel Ice Lake CRB mainboard
* Documentation
Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a INFO print indicating that we did infact attempt to display the
MRC training message to the user.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Print seen in cbmem -c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I1a20fb221aa2fa0eeaf9b7f8cf3d8a8ab0b91133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib43d3402f94f47dc576fb99a6b2a7acf6f0af220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71982
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/dragonegg.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0e5a6e54abc7c03a2fbffa308db20c392e2a600b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71983
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/dedede.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id2c1f24a8fa54eea512b5bd3dd91423f9892687d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71984
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/volteer.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0e48b110826f16d13d18c138fce03a56c85b9d1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71985
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/taeko.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I52f9c261f4eea34e6d2300c8de97ee018d886189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71987
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/rex.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idc40045445cccc5b34fb49901d9ef548f2f0560b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71986
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/hatch.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I05a2fab75c3d931651885db0003ab8c5748a1568
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71934
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I73bac9560d0ff315d6fe6f4efc3ee9011f77c660
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72036
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Iccf37a340880e4b5a18f51c3add9a15a74e1d7b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72030
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I55fa5941a9255f60c2aa23b90d16cf342d6f458f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72032
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: If069e66f2762eb373d35d635c09226ac5be99c7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72039
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I02fe236506abbc0d97982747cfcf3c0e9ef4897a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72040
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I8135dc918cb04c854dc003966b7657806a42bad9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72042
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I12497d46e58aae41ec8dcb5d567267579dc12fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72041
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I349a2b24ecdee347548b5c7b292c5075e6150a19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72033
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch refactors the mainboard_romstage_entry() function to avoid
redundant chipset programming caused by global reset due to CSE FW
sync operation. Hence, keeping only the minimal and mandatory
operations required to perform CSE FW sync successfully.
This would help to optimize the boot flow by removing redundant
programming like SA, SMBUS twice in every CSE FW update path.
TEST=Able to build and boot Google/Rex successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a13fac1e99341991d8dd818d4ab8a20d209a94c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71933
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the mainboard_romstage_entry() function to avoid
redundant chipset programming caused by global reset due to CSE FW
sync operation. Hence, keeping only the minimal and mandatory
operations required to perform CSE FW sync successfully.
This would help to optimize the boot flow by removing redundant
programming like SA, SMBUS twice in every CSE FW update path.
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iba9767ef51d7fc7ecf9de14454105865433ba041
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71932
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 5KB to 8KB to fix
cbmem buffer overflow issue.
BUG=b:261800015
Test=Boot MTL simics and check cbmem -c | grep 'CBFS: Found'
lists all stages.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6a49f88aff07841d105cd3916086aa9e496654c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71921
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that multiple platforms are trying to initialize eMMC in coreboot
instead of depthcharge, lets move common functionality into commonlib
instead of copying the same functionality between multiple platforms.
Note for consistency, changed name of set_early_mmc_wake_status() to
mmc_set_early_wake_status(). Also adding an mmc_send_cmd1() function
for retrieving the Operating Conditions Register (OCR) contents.
BUG=b:218406702
BRANCH=None
TEST=emerge-herobrine coreboot chromeos-bootimage
flash onto villager device and make sure still boots ChromeOS
Change-Id: Id00535b05bbd379081712601ef10e762c1831747
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Found using -Woverride-init command option.
Change-Id: I9f0755de9fae678fc5d78a709453fd1098d70e50
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I3256c3c6a4ea331efae00d78192355a1fd78d6d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
MSR_PPIN_CTL may need to be read more than once, so lock PPIN CTL
MSR at a late BS_PAYLOAD_LOAD boot state.
This MSR is in platform scope and must only be locked once on each
socket. Add a spinlock to do so.
Tested=On OCP Craterlake single socket, rdmsr -a 0x04e shows 1.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I8deb086339267cf36e41e16f189e1378f20b82f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The patch uses 'enum cb_error' values as return values for below
functions:
1. cse_get_rw_rdev()
2. cse_erase_rw_region()
3. cse_write_rw_region()
4. cse_locate_area_as_rdev_rw()
5. cse_get_target_rdev()
6. cse_copy_rw
TEST=Build, boot and perform CSE downgrade test on the Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I9c664430a5015d37b9c329f85886f8622deaa497
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses cb_err enum values as return values for function
cse_get_boot_performance_data() instead of true/false.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I0153d5496c96fb0c2a576eef1fe2fa7fa0db8415
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses cb_err enum values as return values for below functions:
1. cse_hmrfpo_enable()
2. cse_boot_to_ro()
3. cse_prep_for_rw_update()
4. cse_sub_part_get_target_rdev()
5. cse_get_sub_part_fw_version()
6. cse_prep_for_component_update()
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I1bdb7d6b2051a69f1021673d464bfad63dd39431
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use 'enum cb_err' values for below cse lite functions instead of true or
false.
Functions whose return values updated in this patch:
1. cse_set_next_boot_partition()
2. cse_data_clear_request()
3. cse_set_and_boot_from_next_bp()
4. cse_boot_to_rw()
5. cse_fix_data_failure_err()
TEST= Do boot test on Gimble.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I7fec530aeb617bab87304aae85ed248e51a6966b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch uses 'enum cb_err' values as return values for
cse_get_bp_info() function.
TEST=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I900e40b699de344f497e61d974bca3fee7f6ecbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch updates return type for below functions as they uses
'enum csme_failure_reason' type return values.
1. cse_sub_part_trigger_update()
2. handle_cse_sub_part_fw_update_rv()
3. cse_sub_part_fw_update()
TEST=Build coreboot code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I43bc2d518a275894860e4d3c930c3c4d9685fb3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71792
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix:
cc1: error: 3rdparty/blobs/mainboard/asrock/h110m: No such file or directory [-Werror=missing-include-dirs]
cc1: error: 3rdparty/blobs/mainboard/acer/aspire_vn7_572g: No such file or directory [-Werror=missing-include-dirs]
...
Change-Id: Icc43e40514a12944fa180197ffe3230ff9800de9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Found using 'Wmissing-include-dirs' command option.
Change-Id: I420b60341dfd0119b14e8492722af62e49fceff8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Iba5b39c6189d3224ba209c7985153701fe8896fb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
It has been reported that the PEIM graphics driver may temporarily
fail communication with the display if the time between libgfxinit
turning off the displays and the PEIM driver initialization is too
short. 200 ms has been identified as a safe delay.
This is a temporary workaround and an investigation is in progress to
come up with a better and long term solution.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is systematically seen
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71656
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If memory training is going to happen and early graphics is supported
by the mainboard, an on-screen text message is displayed to inform the
end user.
Memory training can take a while and an impatient end user facing a
black screen for a while may reset the device unnecessarily.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On screen text message during MRC training observed on skolas
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70300
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Verify that VGA text mode is functional in romstage
Change-Id: I727b28bbe180edc2574e09bf03f1534d6282bdb2
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70303
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces an early graphics driver which can be used in
romstage in cache-as-ram mode. The implementation relies on
`libgfxinit' and provide VGA text mode support.
SoCs wanting to take advantage of this driver must implement the
`early_graphics_soc_panel_init' function to set the panel power
sequence timing parameters.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Graphics bring up observed on skolas with extra patches
Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve
real-time behaviour of the SoC (see Intel doc #640979). It describes,
amongst knobs for the OS, a couple of firmware settings that need to be
set properly to reduce latencies in all the subsystems. Things like
clock and power gating as well as low power states for peripherals and
buses are disabled in this scenario.
This patch takes the mentioned UEFI parameters from the guide and
translates them to FSP-M and FSP-S parameters. In addition, a chip
config switch guards this tuning which can be selected on mainboard
level if needed.
When this real-time tuning is enabled, the overall system performance
in a real-time environment can be increased by 2-3%.
Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3dafd6c030c0c848aa82b03bb336cc8fad14de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The Data Protected Range (DPR) needs to be set for all DPR devices,
not only the root device. Separate the setup from the memory
resource map reservation.
Change-Id: I7e49db23960e3938e8e158082be3c5ecf3cf95f3
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Alder Lake and Tiger Lake had unnecessary lower-case 'i' in GPP_C0_IRQ
define name.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ida892b00e5a28544950cb9863d0ff2408a514576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SA_DEV_IGD is used by the early graphics feature implemented by the
Intel common block.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Compilation
Change-Id: Ic9f0fe1683d55a53c705ae717fe9e40fd8873d1f
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
As the used 'bool' type is defined in stdbool.h, include types.h
(instead of stdint.h) which includes all needed header files.
Change-Id: I3f75776575a7a5f70484411b9f3458530f706ec4
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71790
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h
includes with the common gpio.h which will include soc/gpio.h
which will include intelblocks/gpio.h which will include
soc/gpio_defs.h
BUG=b:261778357
TEST=Able to build and boot Google/rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58e428cde5e13f4f0dfe528d798c0613b7f8a94a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove redundant nested check for ACPI support.
Change-Id: Ie4b40382d304028135bcdd7851e2f48333570421
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
get_cpu_index() helper function returns cpu's index based on it's APIC
id position from the ascending order list of cpus' APIC IDs.
In order to calculate the cpu's index, the helper function needs to
traverse through each cpu node to find their APIC IDs. So, the function
traverse the CPU node list from the cpu whose APIC ID is 0 assuming it
is the first cpu node in the list. This logic works fine where BSP's
APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as
APIC ID numbering first get assigned for CPU Die Efficient cores, then
Performance cores.
Please refer section# 6.1 of doc#643504 for more details on APIC IDs.
Considering the APIC Id allotment for MTL cores, as existing code
traversing begins from the cpu that has APIC Id#0 which may not be the
first cpu node in the list so index calculation results in wrong value.
The patch addresses above described issue by traversing all the CPU
nodes to calculate the cpu index. Also, prevents inconsistent report
of /sys/devices/system/cpu/cpu*/cpufreq/* and
/sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot.
TEST=Verified that the get_cpu_index helper function returns the correct
index id for a CPU on Rex.
The coreboot log with code instrumentation, before this patch:
[DEBUG] my_apic_id:0x10 cpu_index: 0x6
[DEBUG] my_apic_id:0x11 cpu_index: 0x6
[DEBUG] my_apic_id:0x42 cpu_index: 0x6
[DEBUG] my_apic_id:0x21 cpu_index: 0x6
[DEBUG] my_apic_id:0x40 cpu_index: 0x6
[DEBUG] my_apic_id:0x31 cpu_index: 0x6
[DEBUG] my_apic_id:0x39 cpu_index: 0x6
[DEBUG] my_apic_id:0xa cpu_index: 0x3
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x8 cpu_index: 0x2
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x28 cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x38 cpu_index: 0x6
[DEBUG] my_apic_id:0x29 cpu_index: 0x6
[DEBUG] my_apic_id:0xe cpu_index: 0x5
[DEBUG] my_apic_id:0x6 cpu_index: 0x2
[DEBUG] my_apic_id:0x20 cpu_index: 0x6
[DEBUG] my_apic_id:0x30 cpu_index: 0x6
[DEBUG] my_apic_id:0x19 cpu_index: 0x6
[DEBUG] my_apic_id:0xc cpu_index: 0x4
[DEBUG] my_apic_id:0x18 cpu_index: 0x6
We can see same cpu_index for multiple cores before fix.
After this patch..
[DEBUG] my_apic_id:0x10 cpu_index: 0x8
[DEBUG] my_apic_id:019 cpu_index: 0xb
[DEBUG] my_apic_id:0x11 cpu_index: 0x9
[DEBUG] my_apic_id:0x18 cpu_index: 0xa
[DEBUG] my_apic_id:0x40 cpu_index: 0x14
[DEBUG] my_apic_id:0x30 cpu_index: 0x10
[DEBUG] my_apic_id:0x42 cpu_index: 0x15
[DEBUG] my_apic_id:0xc cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x29 cpu_index: 0xf
[DEBUG] my_apic_id:0xe cpu_index: 0x7
[DEBUG] my_apic_id:0x20 cpu_index: 0xc
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x31 cpu_index: 0x11
[DEBUG] my_apic_id:0x28 cpu_index: 0xe
[DEBUG] my_apic_id:0x21 cpu_index: 0xd
[DEBUG] my_apic_id:0xa cpu_index: 0x5
[DEBUG] my_apic_id:0x38 cpu_index: 0x12
[DEBUG] my_apic_id:0x8 cpu_index: 0x4
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x39 cpu_index: 0x13
Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
PRMRR is used by many Intel SOC features, not just Intel SGX.
As of now SGX and Key Locker are the features that need PRMRR.
Untie it from Intel SGX specific files and move to common cpulib.
Also rename PRMRR size config option. Use the renamed PRMRR size
config option to set the PRMRR size.
TEST=Able to set PRMRR size using config.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Also disable TCO timer through calling tco_configure().
If tco_configure() is not called, the TCO timeout would
trigger SMI periodically about every 2 seconds with SMM log:
"TCO_STS: BIT18 TIMEOUT"
Tested=On AC CRB, does not see periodic SMI log.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
If cbmem_top is not 1M aligned there will be a hole between DPR base
and cbmem_top that the allocator will consider as unassigned memory.
Resources could incorrectly be assigned to that region and the final
MTRR solution will also try to skip that hole, therefore using a lot
more variable MTRRs than needed.
TESTED on Archer City 2S system: Uses 1 variable MTRR in the final
setup instead of 7.
Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
Port of commit 4be8d9e80deb ("soc/intel/adl: Add support to configure
package c-state demotion")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCState Demotion : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch configures max Pkg C-state to Auto which limits the max
C-state to deep C-state.
Port of commit af42906efa72 ("soc/intel/alderlake: Set max Pkg C-states
to Auto")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCStateLimit : 0xFF
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic403ab83a594b04920d5cf600432939687a2598b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch addresses Intel heterogeneous cores as `Efficient` and
`Performance` cores instead of `small` and `big` cores. It is to ensure
coreboot code has uniform reference to the heterogeneous cores. So, the
patch renames all `small` and `big` core references to `efficient` (eff)
and `performance` (perf) cores respectively.
TEST=Build the code for Brya and Rex boards
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I98c9c0ed86b211d736a0a1738b47410faa13a39f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71639
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add below mentioned functions:
is_sgx_configured_and_supported():
Checks if SGX is configured and supported
is_keylocker_configured_and_supported():
Checks if Key Locker is configured and supported
check_prm_features_enabled():
Checks if any of the features that need PRM are configured
and supported. As of now SGX and Key Locker are the only
features that need PRM.
Also, call check_prm_features_enabled() from get_valid_prmrr_size()
to make sure PRM dependent features are enabled and configured before
returning PRMRR size.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I51d3c144c410ce4c736f10e3759c7b7603ec3de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add INTEL_KEYLOCKER Kconfig option. Disable it by default. The
specification of Key Locker can be found via document #343965
on Intel's site.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ia78e9bfe7ba2fd4e45b4821c95b19b8e580dccab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch
allows MTL boards to dynamically assign PCI IRQs. This means not relying
on FSP defaults, which eliminates the problem of PCI IRQs interfering
with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC
routing.
BUG=none
TEST=Build and boot to google/rex. Check dmesg and make sure that there
is no regression.
IO-APIC interrupts before:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi idma64.5, ttyS0, intel-ipu6
28: IO-APIC 28-fasteoi idma64.6, pxa2xx-spi.6
29: IO-APIC 29-fasteoi i2c_designware.3
30: IO-APIC 30-fasteoi i2c_designware.4
32: IO-APIC 32-fasteoi idma64.0, i2c_designware.0
33: IO-APIC 33-fasteoi idma64.1, i2c_designware.1
35: IO-APIC 35-fasteoi idma64.2, i2c_designware.2
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
IO-APIC interrupts after:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1083:00
16: IO-APIC 16-fasteoi intel-ipu6
20: IO-APIC 20-fasteoi idma64.5, ttyS0
27: IO-APIC 27-fasteoi idma64.0, i2c_designware.0
28: IO-APIC 28-fasteoi idma64.1, i2c_designware.1
30: IO-APIC 30-fasteoi idma64.2, i2c_designware.2
31: IO-APIC 31-fasteoi i2c_designware.3
32: IO-APIC 32-fasteoi i2c_designware.4
35: IO-APIC 35-fasteoi idma64.6, pxa2xx-spi.6
88: IO-APIC 88-fasteoi ELAN0000:00
89: IO-APIC 89-fasteoi chromeos-ec
99: IO-APIC 99-edge cr50_i2c
106: IO-APIC 106-fasteoi chromeos-ec
_PRT before:
Package (0x04) ==> 0x001FFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001FFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001FFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001FFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x001EFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001EFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001EFFFF, 0x02, Zero, 0x1B
Package (0x04) ==> 0x001EFFFF, 0x03, Zero, 0x1C
Package (0x04) ==> 0x001CFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x001CFFFF, One, Zero, 0x11
Package (0x04) ==> 0x001CFFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x001CFFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0019FFFF, Zero, Zero, 0x1D
Package (0x04) ==> 0x0019FFFF, One, Zero, 0x1E
Package (0x04) ==> 0x0019FFFF, 0x02, Zero, 0x1F
Package (0x04) ==> 0x0017FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0016FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0016FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0016FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0015FFFF, Zero, Zero, 0x20
Package (0x04) ==> 0x0015FFFF, One, Zero, 0x21
Package (0x04) ==> 0x0015FFFF, 0x02, Zero, 0x22
Package (0x04) ==> 0x0015FFFF, 0x03, Zero, 0x23
Package (0x04) ==> 0x0014FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0014FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0014FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0012FFFF, Zero, Zero, 0x1A
Package (0x04) ==> 0x0012FFFF, One, Zero, 0x25
Package (0x04) ==> 0x0012FFFF, 0x02, Zero, 0x19
Package (0x04) ==> 0x0010FFFF, Zero, Zero, 0x17
Package (0x04) ==> 0x0010FFFF, One, Zero, 0x16
Package (0x04) ==> 0x000DFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x000DFFFF, One, Zero, 0x11
Package (0x04) ==> 0x000BFFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0008FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0007FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0007FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0007FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0006FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0006FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0006FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0006FFFF, 0x03, Zero, 0x13
Package (0x04) ==> 0x0005FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0004FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0002FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, Zero, Zero, 0x10
Package (0x04) ==> 0x0001FFFF, One, Zero, 0x11
Package (0x04) ==> 0x0001FFFF, 0x02, Zero, 0x12
Package (0x04) ==> 0x0001FFFF, 0x03, Zero, 0x13
_PRT after:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000BFFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000012
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000013
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x0000001B
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x0000001C
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x0000001D
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x0000001E
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000017
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x0000001F
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x00000020
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x00000021
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000015
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000016
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I013cd5faab6f425ab1af91fe2a36ac3b8aeef443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use CPUID_STRUCT_EXTENDED_FEATURE_FLAGS macro to get extended CPU
capabilities flags using cpuid_ext inline function.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: If680ffff64e2e1dabded8c03c4042d349a11b635
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71646
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Build and boot to google/taniks. Check dmesg and make sure that
there is no regression.
Also confirm that there is no change in ACPI _PRT and IO-APCI interrupt
assignment.
IO-APIC interrupts before and after this patch:
1: IO-APIC 1-edge i8042
8: IO-APIC 8-edge rtc0
9: IO-APIC 9-fasteoi acpi
14: IO-APIC 14-fasteoi INTC1055:00
23: IO-APIC 23-fasteoi idma64.5, ttyS0
37: IO-APIC 37-fasteoi idma64.0, i2c_designware.0
38: IO-APIC 38-fasteoi idma64.1, i2c_designware.1
40: IO-APIC 40-fasteoi idma64.2, i2c_designware.2
41: IO-APIC 41-fasteoi idma64.3, i2c_designware.3
42: IO-APIC 42-fasteoi idma64.4, i2c_designware.4
45: IO-APIC 45-fasteoi idma64.6, pxa2xx-spi.6
77: IO-APIC 77-edge cr50_i2c
100: IO-APIC 100-fasteoi ELAN0000:00
103: IO-APIC 103-fasteoi chromeos-ec
_PRT before and after this patch:
Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013
Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015
Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016
Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000011
Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000018
Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000019
Package (0x04) ==> 0x0010FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0010FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0011FFFF, 0x00, 0x00, 0x0000001A
Package (0x04) ==> 0x0011FFFF, 0x01, 0x00, 0x0000001B
Package (0x04) ==> 0x0011FFFF, 0x02, 0x00, 0x0000001C
Package (0x04) ==> 0x0011FFFF, 0x03, 0x00, 0x0000001D
Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x0000001E
Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x0000001F
Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000016
Package (0x04) ==> 0x0013FFFF, 0x00, 0x00, 0x00000020
Package (0x04) ==> 0x0013FFFF, 0x01, 0x00, 0x00000021
Package (0x04) ==> 0x0013FFFF, 0x02, 0x00, 0x00000022
Package (0x04) ==> 0x0013FFFF, 0x03, 0x00, 0x00000023
Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000017
Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x00000024
Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000011
Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x00000025
Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x00000026
Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x00000027
Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x00000028
Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000012
Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000013
Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000014
Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000015
Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000016
Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x00000029
Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x0000002A
Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x0000002B
Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001DFFFF, 0x00, 0x00, 0x00000010
Package (0x04) ==> 0x001DFFFF, 0x01, 0x00, 0x00000011
Package (0x04) ==> 0x001DFFFF, 0x02, 0x00, 0x00000012
Package (0x04) ==> 0x001DFFFF, 0x03, 0x00, 0x00000013
Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000017
Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000014
Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x0000002C
Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x0000002D
Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000016
Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000017
Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000014
Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000015
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib4fc850228b7ddbf84e2feb2433adff5e4002033
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Verify presence of subsystem ID for fast_spi device on google/rex.
lspci output before this patch:
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23]
lspci output after this patch:
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23]
Subsystem: Intel Corporation Device [8086:7e23]
Note: UPD SiSkipSsidProgramming was set to 1 for above test.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I08c7a5a3fdc7389b315e85180c16d1ec335fbba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add is_keylocker_supported() API in common cpulib.
This function checks if the CPU supports Key Locker feature.
Returns true if Key Locker feature is supported otherwise false.
Change-Id: Ide9e59a4f11a63df48838eab02c2c584cced12e1
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71117
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For some reason, the Windows LPEA drivers won't attach without
_HRV (hardware version) defined for the GPIO controllers.
Add it, using value taken from Intel baytrail/valleyview edk2
reference code.
TEST=boot Windows 10/11 on google/rambi, verify LPEA drivers load
properly.
Change-Id: Iaa6e1b3f68537e012e4a58175d5334a8aa2f4178
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For some reason, the Windows i2c drivers won't attach without
_HRV (hardware version) defined for the i2c controllers.
Add it, using value taken from Intel baytrail/valleyview edk2
reference code.
TEST=boot Windows 10/11 on google/rambi, verify i2c drivers load
properly.
Change-Id: I590acd1f1b75f6bf2bf278e67eec1dcc24bcc15d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move is_sgx_supported() API to common cpulib code, so that
this function can be used by other code without enabling
SOC_INTEL_COMMON_BLOCK_SGX_ENABLE config option.
Change-Id: Ib630ac451152ae2471c862fced992dde3b49d05d
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
stdbool is added through types.h file.
Change-Id: I317faf322a7e73b706724802d99815ab50e655e2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for boards using SOC_INTEL_BRASWELL.
Currently BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is selected for
CPU_INTEL_HASWELL, SOC_INTEL_BRASWELL and others (see [2]). However,
there seems to be no particular reason on those platforms. We've dropped
the config for haswell. Now do the same for SOC_INTEL_BRASWELL, so that
VBOOT_VBNV_FLASH can be enabled.
VBOOT_VBNV_FLASH is enabled for the following boards:
- facebook/fbg1701: A 0x2000 RW_NVRAM region is allocated, with the
FW_MAIN_A(CBFS) size reduced by 0x2000.
- google/cyan, intel/strago: Repurpose RW_UNUSED as RW_NVRAM.
[1] https://issuetracker.google.com/issues/235293589
[2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08
("drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config")
BUG=b:235293589
TEST=./util/abuild/abuild -t FACEBOOK_FBG1701 -a (with VBOOT selected)
TEST=./util/abuild/abuild -x -t GOOGLE_CYAN -a
TEST=./util/abuild/abuild -x -t INTEL_STRAGO -a
Change-Id: I46542c2887b254f59245f20b8642b023a7871708
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
Replace the intelblocks/gpio.h and soc/gpio.h includes with the
common gpio.h which will include soc/gpio.h which will include
intelblocks/gpio.h
BUG=b:261778357
TEST=Able to build and boot Google/brya.
Change-Id: Ia90a8ea7b4ee125657c7277e3e14018cfe5423a9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71266
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3dfd7dd1de3bd27c35c195bd43c4a5b8c5a2dc53
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71522
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Not (a)` with `~a`.
Change-Id: I53993fb7b46b3614d18ee001323f17efacbf04c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab611cda1083da4378a6e509d11ea26bdbb45edd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71503
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7da6ee3c5bce6b32874e59ad46290b86db8f97c6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71502
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Replace all pcidev_path_on_root() and is_dev_enabled()
functions combination with is_devfn_enabled().
2. Remove unused local variable of device structure type
(struct device *).
3. Replace pcidev_path_on_root() and dev->enabled check with
is_devfn_enabled() call.
TEST=Able to build and boot without any regression seen on MTL.
Port of 'commit 50134eccbdf4 ("soc/intel/alderlake: Make use
of is_devfn_enabled() function")'
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I54bbd2bdba69a19e0559738035916fa7ac60faaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
