Age | Commit message (Collapse) | Author |
|
The patch update MTL_USE_COREBOOT_MP_INIT Kconfig description.
TEST=Build code for MTL
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I38609cb03714084dd9092f41dd6e5b418a7f120a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per MTL processor EDS.
TEST= Able to build and boot RVP.
Confirmed TME supported mode detected via temporary debug prints and MSR 0x9ff indicates activated.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Id368925504d81025239e94698d2cb0e2266a5a96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66949
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Signed-off-by: John Zhao <john.zhao@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8dcee90080c6e70dadc011cc1dbef3659fdbc8f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66951
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors p2sb_execute_sideband_access() to be able to
handle SBI operations in both SMM and non-SMM scenarios.
Prior to FSP-S operation being done, the IOE P2SB device will be
visible on the PCI bus hence, performing the SBI operation using IOE
P2SB doesn't involve unhide/hide operation.
Post FSP-S, the IOE P2SB device is hidden.
Additionally, SBI operations can't be performed as is. The only
possible way to send SBI is inside SMM mode and to do that, coreboot
needs to unhide the P2SB device prior to sending the SBI and hide
it post sending SBI.
As a result, the p2sb_execute_sideband_access() function has been
refactored to manage these cases seamlessly without users of the
p2sb_execute_sideband_access() actually being bothered about the
calling mode.
BUG=b:239806774
TEST=Able to perform p2sb_execute_sideband_access() function call in
both SMM and non-SMM mode without any hang/die.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iafebd5190deb50fd95382f17bf0248fcbfb23cb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook up Lp5CccConfig FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3d7ff8e08546f06cf7807ee825cfef84c14a6c5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67052
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook up ECT FSP UPD for Intel MeteorLake.
BUG=b:243734885
TEST=Built and booted on Google Rex. Verified the UPD value in MRC log.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Idc23717c3ce52e3635e2da41733058f912545e5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch resolves the SoC programming dependency order where enabling
extended bios support requires MCHBASE to be enabled.
BUG=b:243693375
TEST=Able to boot from RW-A slot which is mapped to extended BIOS range.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8bd9c3d3fb5e82e34f2d6af8548452c744d4b3c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67046
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file has nothing useful. Get rid of it.
Change-Id: Id2a42005d3b4b5161079c9ff48867cfc6fb0413d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch brings INTEL_TME config check prior programming
TME Set Activation Core MSR on all cores.
TEST=Able to boot Google/Taeko to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8af7e305da1050f443929ab33be556e713e53e9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66976
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIOS must send the IP_LOAD HECI command to fetch the firmware for CPU
PCIe Gen5 and upload it via CPU REG BAR prior FSP Silicon Init.
Implementation based on public Slimbootloader's
"Silicon/AlderlakePkg/Library/CpuPcieHsPhyInitLib".
TEST=Boot MSI PRO Z690-A and see the HSPHY FW is loaded.
PCIe x16 Gen3 GPU card started working in the PCIE 5.0 slot.
[DEBUG] HECI: Sending Get IP firmware command
[DEBUG] HECI: Get IP firmware success. Response:
[DEBUG] Payload size = 0x6944
[DEBUG] Hash type used for signing payload = 0x3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6c6c11581e3d3d9bab0131fae6ef487cafe98080
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This enables SOC_INTEL_COMMON_BLOCK_GPIO_PMODE_4BITS to support 4 bits
GPIO pad mode to configure native function 8 to 15.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ibf4b13a3d19095d15bf857c7fe4ec0affb54a4e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66391
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Intel GPIO pad supports 4 bits pad mode, PAD_CFG_DW0[13:10] for pins
that native function 8 to 15 is assigned. This adds native function
definitions from NF8 to NF15 and updates PAD_CFG0_MODE_MASK to support
4 bits pad mode configuration.
Since PAD_CFG_DW0[16:13] is reserved for pins that NF8 or higher is not
assigned, this change would not cause an issue but Kconfig option is
added to minimize an impact and support 4 bits pad mode configuration.
BUG=b:239690757
TEST=build and verify pad mode configuration with Meteor Lake mtlrvp
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Iefd2daa92a86402f2154de2a013ea30f95d98108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Just use the conditional inclusion through `device/Makefile.inc`.
Change-Id: Id363a97460ae2cfe4b10d491d4ef06394eb530c2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch runs `set_tme_core_activate()` on all CPUs (BSP+APs) as
per Alder Lake Processor EDS.
TEST= Able to build and boot Google/Redrix.
Dumping MSR 0x9FF on all logical processors shows zero value being
set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I130480d4fba413d47d0d0137932ec1fb041a88d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66753
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements API to program TME core activation MSR 0x9FF.
Write zero to TME core activate MSR will translate the
TME_ACTIVATE[MK_TME_KEYID_BITS] value into PMH mask register.
Note: TME_ACTIVATE[MK_TME_KEYID_BITS] = MSR 0x982 Bits[32-35]
TEST=Able to build and boot Google/Redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I48cf8e255b294828ac683ab96eb61ad86578e852
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch removes the static kconfig being used to fill in TME enable
FSP UPD. Instead use`is_tme_supported()` and `CONFIG(INTEL_TME)` to check
if the CPU has required TME support rather than hardcoding.
TEST=FSP debug log shows `TmeEnable` UPD is set appropriately for the
TME-supported CPU SKUs.
As per FSP-M debug log:
Without this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x1
With this CL, Alder Lake-P CPU SKU without TME support:
[SPEW ] TmeEnable = 0x0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8aa2922baaf2a49e6e2762d31eaffa7bdcd43b0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66750
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per the Alder Lake FAS coreboot shall detect the existence of TME
feature by running the CPUID instruction:
CPUID leaf 7/sub-leaf 0
Return Value in ECX [bit 13]=1
If TME is supported then only access to TME MSRs are allowed otherwise
accessing those MSRs would result in GP#.
TEST=Able to detect the existence of TME feature across different
Alder Lake and Meteor Lake CPU SKUs.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd4fcf15a66d27748ac7fbb52b18d7264b901cd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66749
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The `INTEL_TME` Kconfig option has a prompt, which means it is meant to
be user-configurable. However, it has been selected from Alder Lake and
Meteor Lake Kconfig, so `INTEL_TME` cannot be disabled on them. Replace
the `select INTEL_TME` statements with default values in order for this
option to be user-configurable on all platforms that support it.
Change-Id: Ib37c108fcc1004840b82be18fd23c340a68ca748
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66756
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Output should be easier to read as a table.
Change-Id: I32e3e0aab5afd25c0b004d18f64de76445d9a0ed
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds the support to enable/disable skipping MBP HOB
from the devicetree based on mainboard requirement.
Only ADL-N FSP has the required support to skip the MBP HOB and
enabling it is saving the Boot time.
BUG=b:241850107
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iddeb2c652fac9513b14139d6f732d333bbb989d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Debian 11 reports ´0:6:0 can´t derive routing for PCI INT D´.
Use FIXED_INT_PIRQ for INT D to PIRQ routing table.
BUG=NA
TEST=Boot Debian 11 on Siemens AS_TGL1 and verify no PIRQ error message
in ´dmesg´
Change-Id: If38c7b6f664e0f6533e583ce62504281a4092720
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit eb80b1efa36c99e485b2604e913c2aa316168eea.
Reason for revert: Results into hard hang with serial debug msg inside FSP-S.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8e7cf804828da8939f591eb0770c8daf830c8d94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add the Shadow Registers from 2 through 5 and print information
from them accordingly. All values were taken from Intel document
number 571993.
Tested on the StarLite Mk III and the correct values are
shown:
[DEBUG] CSE: IBB Verification Result: PASS
[DEBUG] CSE: IBB Verification Done : YES
[DEBUG] CSE: Actual IBB Size : 88
[DEBUG] CSE: Verified Boot Valid : FAIL
[DEBUG] CSE: Verified Boot Test : NO
[DEBUG] CSE: FPF status : FUSED
Please note, the values shown are in an error state.
This replaces the Fuse check that is done via Heci, as this will only
work whilst the CSE is in a normal state.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a9e7b329010fae1a2ed9c3fefc9765e617cdfe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
coreboot is unable to disable certain devices, whilst many are hidden
DPTF and SMBus are not. Set this to enabled chipset so that it is
enabled by default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85d74179b6fe3c6126566422f82f7b806f80d0c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Build error for platforms using Intel FSP for TGL_IOT (FSP_TYPE_IOT). File FirmwareVersionInfoHob.h does not exist in Intel FSP TGL IOT package.
File FirmwareVersionInfoHob.h is included when DISPLAY_FSP_VERSION_INFO is enabled. Enable this config for non TGL_IOT only.
BUG = NA
TEST = Verify that DISPLAY_FSP_VERSION_INFO is disabled by default for TGL_IOT
configuration (Build Siemens AS_TGL1).
Change-Id: Ief5a7222daf6f1658e8dc04f97b4ddc2bcb74905
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66636
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch updates the comments on return values and heci_reset()
triggering during error scenarios of heci_receive() and heci_send()
functions to reflect the current implementation.
Test=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I6c6c3312602c772147cb315db9ea1753d84a0fb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Starting vboot earlier in bootblock instead of romstage is usually
preferred (smaller root of trust, among other things). Therefore
unselect VBOOT_STARTS_IN_ROMSTAGE for broadwell. Also remove the unused
BROADWELL_VBOOT_IN_BOOTBLOCK option.
Change-Id: If8feea403ee4cd3a16ed8cb0faf9f4ccb34feaaf
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit f87489bbae5bb1ae3b17b6a03af9e309769b1f72.
Reason for revert: Broadwell actually supports early flash writes.
Change-Id: I342aefe464c72a32b41a40062b62d871caa0707b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
xhci.asl places the SS ports at 11-14, following HS ports 1-10. However,
for Nissa, the kernel detects 12 HS ports 1-12 and 4 SS ports at 13-16,
resulting in the PLD intended for SS ports 1 and 2 being associated with
HS ports 11 and 12.
Changing the asl for SS to 13-16 makes locations associate correctly and
peering work.
BUG=b:234544025
BRANCH=firmware-brya-14505.B
TEST=manually verified on Nissa and Brya devices
Change-Id: I57aef771a7ff086b71a9e90b81e1a3635f832b2f
Signed-off-by: Adam Mills <adamjmills@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66590
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into a helper function to fill `2nd microcode loading
FSP UPD` if FSP is running CPU feature programming.
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8534305e4e973c975ad271b181a2ea767c840ae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66686
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops explicit usage of the address-of operator ('&') while
passing the function pointer (argument 0) to the
`mp_run_on_all_cpus` API.
Note: It's just cosmetic change without any real difference in the operation.
TEST=Able to build and boot Google/Kano where CPU feature programming
is successful on all logical processors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2c77959a76d2240ad1bfb7a9d7b9db7e8aee42f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66685
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust an ASCII art table so that it looks good: consistent padding and
aligned table borders.
Change-Id: I26196f969406e03f320256b0c3a337282f636914
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66707
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Introduce the `BROADWELL_LPDDR3` Kconfig option along with some wrapper
code to allow mainboards using LPDDR3 DRAM to supply the DQ/DQS maps to
chipset code without having to use `pei_data`. The only mainboard using
LPDDR3 is Google Samus.
Change-Id: I0aaf0ace243c03600430c2a7ab6389a7b20cb432
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55812
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboards do not need to know about `pei_data` to tell northbridge code
where to find the SPD data. As done on Haswell, add the `mb_get_spd_map`
function and the `struct spd_info` type to retrieve SPD information from
mainboard code without having to use `pei_data` in said mainboard code.
Unlike Haswell MRC, Broadwell MRC uses all positions of the `spd_data`
array, not just the first. The placeholder SPD address for memory-down
seems to be different as well. Adapt the existing code to handle these
variations. Once complete, the abstraction layer for both MRC binaries
will have the same API.
Change-Id: I92a05003a319c354675368cae8e34980bd2f9e10
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
There's no generic way to tell whether a mainboard has an EC or not.
Making Kconfig symbols for these options seems overkill, too. So, just
put them on the devicetree. Also, drop unnecessary assignments when the
board's current value is zero, as the struct defaults to zero already.
Change-Id: I8d3b352333bea7ea6f7b0f96d73e6c2d7d1a2cfb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55809
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The SPD file handling code is generic and can be used on any other
mainboard. Move it to chipset scope to enable code reuse.
Change-Id: I85b1460ccb82f0c1bf409db4a6b4c9355c25e76d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55808
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Introduce the `SPD_MEMORY_DOWN` macro to indicate that a slot is used
with memory-down. This enables computing the channel disable masks as
the bits for slots where the SPD address is zero. To preserve current
behavior, zero the SPD addresses for memory-down slots afterwards.
Change-Id: I75b7be7c72062d1a26cfc7b09b79de62de0a9cea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55807
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These files contain no creative content, and therefore have no
copyright. This effectively means that they are in the public
domain.
This commit updates the unlicensable empty (and effectively empty)
files with the CC-PDDX identifier for license compliance scanning.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0b76921a32e482b6aed154dddaba368f29ac2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66497
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 844dcb3725fc95df53a7229703f5059d2c36f98e.
A power and performance analysis performed on Alder Lake demonstrated
that with an EPP (Energy Performance Preference) at 50% along with
EET (Energy Efficient Turbo) disabled, the overall SoC performance are
similar or better and the SoC uses less power.
For instance some browser benchmark results improved by 2% and some
multi-core tests by 4% while at the same time power consumption
lowered by approximately 7.6%.
BRANCH=firmware-brya-14505.B
BUG=b:240669428
TEST=verify that ETT is disabled
`iotools rdmsr 0 0x1fc'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I96a72009aaf96d4237d57f4d5c8b1f41f87174d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66281
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
- ADP_P_* -> RPP_S_* (got mixed up I guess)
- Remove duplicates of ADP_S_ESPI_*
- Add infix _ESPI_ to all ADP_S device ID's
Document: 619362
Change-Id: Ic18ecbd420fc598f0ef6e3cf38e987ac3ae6067e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66629
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
R680E, Q670E, H610E are the ADL-S IoT variants
TEST=Boot ADL-S RVP DDR5 and see silicon info is reported
as PCH: AlderLake-S R680E
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I1804994b4b72f0484eabb15323736679d2668078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth
from the common block. Meteor Lake Platform will implement it.
BUG=b:213574324
TEST=Built coreboot image successfully.
Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC
memory modules), and the SPD info refers to one channel: the primary
bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder
Lake, there are 2 memory controllers with 4 32-bit channels each for
DDR5. FSP has 16 positions to store SPD data, some of which are only
used with LPDDR4/LPDDR5.
To try to make things less confusing, FSP abstracts the DDR5 channels
so that the configuration works like on DDR4. This is done by copying
each DIMM's SPD data to the other half-channel. Thus, fix the wrapper
parameters for DDR5 accordingly.
Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now
function properly. Without this patch, only the top slot would work.
Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable SOC_INTEL_GFX_NON_PREFETCHABLE_MMIO for MTL to fix guc driver
failure.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifc20935bccdda55db3e57eecd37a4260b3f1a2d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66613
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable.
Due to the prefetchable attribute, resource allocation for IGD BAR0 is
assigned WC memory and it causes kernel driver failure.
For avoiding kernel driver failure, ignore prefetch PCI attribute
for IGD BAR0 to assign UC memory.
We're working on publishing below information.
- IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR
- GTTMMADDR BAR should be always mapped as UC memory although
marked Pre-fetchable.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This change adds support for enabling VPU on MTL SoC.
BUG=b:240665069
TEST=build coreboot mtlrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie79b45f34a669b9ff777599cb85217abac6cb74e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
FSP reports missing IRQ for devices.
Add USBOTG (D20:F1) and CrashLog & Telemetry (D10:F0) to irq_constrain.
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ic02d33045a07a6888ba97d8f2c6fa71bc7e363e8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The software used to read the document listing the VR settings turns
out to not be perfectly compatible. Indeed, it displays a value of 55A
for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A.
After a thorough review using the software used to create the
document, it is the only value presenting a discrepancy.
BRANCH=firmware-brya-14505.B
BUG=b:239797178
TEST=build and boot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Support for feature "In-Band ECC" not available for Tiger Lake
Similar to Elkhart Lake, Tiger Lake also provides this feature.
Ported from Elkhart Lake (CB:55668)
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD.
BUG=b:240665069
TEST=build rex coreboot
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new config FSP_TYPE_IOT to add the IoT FSP option so that
respective mainboard Kconfig can use IoT FSP if needed.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
UFS storage devices require the bRefClkFreq attribute to be set to
operate correctly in high speed mode. The correct value is determined by
what the SoC / board supports. For the ADL UFS controller, it is
19.2 MHz.
a) Introduce a new ACPI property "ref-clk-freq".
b) Add support to configure this property using an SoC Kconfig.
Kernel patch:
https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/
20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/
BUG=b:238262674
TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel
correctly parses ref-clk-freq as 19.2 MHz.
Scope (\_SB.PCI0)
{
Device (UFS)
{
Name (_ADR, 0x0000000000120007) // _ADR: Address
Name (_DDN, "UFS Controller") // _DDN: DOS Device Name
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
/* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"ref-clk-freq",
0x0124F800
}
}
})
}
}
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
BUG=b:180458099
TEST=Boot DDR5 to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Copy the constraint from ADL-S to ADL-P.
Fixes the following warning in Linux on System76 oryp9, which has an
NVIDIA GPU on the bridge.
pcieport 0000:00:01.0: can't derive routing for PCI INT A
This, in turn, resolves an IRQ conflict with the PCH HDA device that
would cause a stack track on every boot.
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I550c80105ff861d051170ed748149aeb25a545db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0.
The System Agent PCI IDs were not present in older 2.1 revision of
DOC #619501. Now that the mapping of these IDs to SKUs is known, fill
the missing TDPs and Power Limit settings based on DOC #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure
VccIn Aux Imon IccMax. They were not present in older 2.1 revision of
DOC #619501. Based on DOC #619501 rev 2.6.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Based on DOC #619501, #634885, #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The patch updates platform_is_resuming() API such that platform resume
state is determined from the saved state (CBMEM) instead of checking PMC
registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early)
ramstage.
coreboot sends DISCONNECT IPC command which times out during resume (S3)
if system has servoV4 connected on port0. The issue occurs only during
the first cycle of resume (S3) test cycle after cold boot due to side
effect of platform_is_resuming() API that is not determining the resume
(S3) state correctly in ramstage.
PM1_STS and PM1_CNT register gets cleared at the start of ramstage.
platform_is_resuming() function was checks the cleared register value
and fails the condition of resume (S3) resulting in sending DISCONNECT
IPC command. Checking the platform resume state from the CBMEM saved
state using acpe_get_sleep_type() function helps cross verify the
system previous state at the later part of ramstage.
localhost ~ # cbmem -c | grep ERROR
[ERROR] EC returned error result code 3
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:0 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:1 to initial state
[ERROR] GENERIC: 0.0 missing read_resources
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0xd0 failed
[ERROR] PMC: Failed sending PCI Enumeration Done Command
BUG=b:227289581
TEST=Verified system boots to OS and verified below tests on
Redrix (ADL-P) and Nivviks (ADL-N)
1. coreboot doesn't send the DISCONNECT during S3 resume
2. suspend S3 passes with both suzyq and servoV4 connected
3. After S3 resume, system detects the pen drive with Superspeed
4. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0ae8c6624b79ce6c269244bd1435900d4d7f997a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There are 3 more CPU PCIe RP UPDs that are the current code is not setting,
and some boards may want to set these, so this patch adds support to set
these UPDs. The default values for any existing boards using these UPDs
should not change with this patch.
The UPDs are:
- CpuPcieRpDetectTimeoutMs
- CpuPcieRpAspm
- CpuPcieRpSlotImplemented
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SLP_S0 residency register and enable LPIT support.
Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current "normal" EPB (six) setting resulted in the desired out of
box power and performance for several CPU generations.
However, a power and performance analysis on Alder Lake and Raptor
Lake CPUs demonstrates that this value results in undesirable higher
uncore power and that seven is a more appropriate value.
Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific
normal EPB value" patch sets the EPB to 7 for Alder Lake.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL
must be set to be able to set the Energy/Performance Bias using MSR
IA32_ENERGY_PERF_BIAS.
Note that since this bit was not set until this patch, the
`set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in
`soc_core_init()` was systematically failing.
BRANCH=firmware-brya-14505.B
BUG=b:239853069
TEST=verify that EPB is set by coreboot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG.
As per GPIO BWG, there are four GPIO reset types in Meteor Lake as
below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- Global Reset for GPP - (Value 11)
Also, dropped the need for having dedicated reset type for GPIO
community 3. As per the MTL EDS, all GPIO communities have the same
reset type.
BUG=b:213293047
TEST=Able to build and boot Google/Rex without below error msg.
[ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping
not found
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Will Kim <norwayforest92@gmail.com>
|
|
This patch introduces a new macro for GPP PAD reset type as
`Global Reset` as documented in Alder Lake EDS doc 630603.
BUG=b:213293047
TEST=Able to build Google/Kano with this change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I39428911babc393dd10750801522a00d0b26d3e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Beginning FSP 2.2 specifications Fsps Config Upd "FspEventHandler"
was moved to Fsps Arch Upd. Hence we were not seeing Fsps Debug
log was not using coreboot debug library.
This change assigns Fspd Arch Upd FspEventHandler with coreboot
ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
Before:
Dumping FSPS_UPD - Size: 0x00001510
0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 0x00 0x00
0x00000010: 0x00
With the fix:
[SPEW ] Dumping FSPS_UPD - Size: 0x00001528
[SPEW ] 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02
[SPEW ] 0x00000010: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[SPEW ] 0x00000020: 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0xAA
[SPEW ] 0x00000030: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
[SPEW ] 0x00000040: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
BUG=b:237263080
TEST=Able to build and boot MTL RVP, verified the FSP-S debug
log is using coreboot debug library.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie63258f6427b3da7927a866bc3767f548b16e3e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This reverts commit b57d172fbb5265d632c031532fcc2aec156e065a.
Reason for revert: Results into hard hang with serial debug msg as
below:
`[EMERG] Unable to unhide the P2SB device!`
Intel team is working towards to fix this issue.
BUG=b:239806774
TEST=Able to boot the Intel/MTLRVP with this revert.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake
to instruct Pad Configuration Lock.
BUG=b:211573253, b:211950520, b:213596994
TEST=Able to perform GPIO lock programming without error on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch updates the GPIO lock configuration recommendation
kconfig string to ensure the SoC user can select the correct
config as applicable for the SoC.
Note: From MTL onwards GPIO lock config can be performed using
PCR write (MMIO write) and the GPIO team has confirmed this.
BUG=b:213596994
TEST=Able to fix below GPIO lock config error msg on MTL with
`SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled.
[INFO ] Locking pad configuration using SBI
[INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73
configuration
[ERROR] SBI Failure: Transaction Status = 1
[ERROR] Failed to lock GPIO PAD, response = 1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch ensures the debug consent value is matching with the
inline comment.
TEST=Able to build the Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build mtlrvp and check IPU0 ACPI ojbect from ssdt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ib5c3d455d272af0e753c775a5fd3f19851b7937d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66056
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hide these ACPI device so Windows does not warn about missing device
drivers.
Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set the default value for MAX_CPUS in the SoC config and drop it from
the mainboards where it is set to those values.
Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If8af4657508f00feff8525b0135c7f73c1959965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib852d0b2cf4d3cbdf7475bd5493bf2e585a5894a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the CSE, General Status and Miscellaneous registers and
print information from them accordingly. All values were taken
from Intel document number 571993.
Tested on the StarLite Mk III and the correct values are
shown:
[DEBUG] CSE: Working State : 2
[DEBUG] CSE: Manufacturing Mode : NO
[DEBUG] CSE: Operation State : 1
[DEBUG] CSE: FW Init Complete : NO
[DEBUG] CSE: Error Code : 3
[DEBUG] CSE: Operation Mode : 0
[DEBUG] CSE: FPF status : unknown
Please note, the values shown are in an error state.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1a5548132dadbb188a33a7ae30a0a1fa144d130f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When override "max_dram_speed_mts", set the DdrSpeedControl to manual.
(0:Auto, 1:Manual)
BUG=b:229549930
BRANCH=none
TEST=build coreboot without error
Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com>
Change-Id: Iffbbee8082fb1a41e0ed1db3f4ea9ec4709c9ce7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65877
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Guard gpmr_lockdown_cfg with SOC_INTEL_COMMON_BLOCK_GPMR
so it doesn't run on platforms that don't select this.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iab5bbd399c3a654dcb95eaa8fce683a50c7322f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65227
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
In preparation to add a third option, have "Client" platforms select a
dedicated Kconfig option instead of the common "_BASE" option. Rewrite
the help texts to clarify what "Client" and "Server" mean, because the
terms refer to the type of silicon and not to the market segment. Some
uniprocessor (single-socket) servers are actually client platforms and
there are some multi-socket workstations based on a server platform.
Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Call heci_init to initialise all Heci devices and bring them to d0.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id2865b649331846fc119da7c4be56cc1fed56b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Ported back from commit ceaf9d116949da68aa9c ("soc/intel/alderlake:
Allow possible options for MP Init")
This patch creates choice that lists all possible options to perform
MP Init as below for Intel Meteor Lake platform:
1. MTL_USE_FSP_MP_INIT: Allow coreboot to bring APs from reset and FSP
runs feature programming based and selects MP_SERVICES_PPI_V2 config.
2. MTL_USE_COREBOOT_MP_INIT: Allow coreboot to perform MP Init (both AP
init and feature programming) using native implementation.
Additionally, selects required RELOAD_MICROCODE_PATCH when coreboot
is expected to run MP Init.
Refactor SoC code to allow required FSP UPD override based on
selected MP Init option.
Additionally, added `FIXME` comment to ensure Intel MTL FSP can bring
back SkipMpInit UPD in MTL to let coreboot override this UPD and ensure
independent MP Init flow.
BUG=b:219053812
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic917e4e03e24d73190cfc72c6ed8e59af427bedf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65743
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables coreboot doing Multiprocessor Initialization (MP)
for Meteor Lake CPU using the native coreboot drivers and passes the
MP PPI data structure to let FSP to perform CPU feature programming
(anything that is restricted) as part of FSP-S.
Additionally, modify the kconfig inclusion order alphabetically.
BUG=b:219061518, b:219053812
TEST=Able to bring all APs from reset by coreboot and successfully
able to perform all CPU feature programming using MP PPI services.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic2781ee0b39e42aa579b72d3d4ee6586d5a89a02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65742
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures Intel Meteor Lake can enable the X2APIC feature.
While debugging Intel Meteor Lake (MTL) based platforms it seems like
enabling `DEFAULT_X2APIC` runs into a hang while coreboot tries to
bring the application processors (APs) from reset using X2APIC mode.
[INFO ] LAPIC 0x10 switched to X2APIC mode.
...
[DEBUG] Attempting to start 3 APs
[DEBUG] Waiting for 10ms after sending INIT.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[ERROR] Not all APs checked in: 0/3.
[DEBUG] 0/3 eventually checked in?
[ERROR] MP initialization failure.
[ERROR] MP initialization failure.
Note: The AP bring up flow between XAPIC and X2APIC are the same
except the way to access those LAPIC registers. X2APIC expects to
access all LAPIC registers using MSR (base with 0x800).
The correct flow to enable X2APIC on MTL would be as follows:
1. Let BSP bring all APs in XAPIC mode.
[INFO ] LAPIC 0x10 in XAPIC mode.
...
[DEBUG] Attempting to start 3 APs
[DEBUG] Waiting for 10ms after sending INIT.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[INFO ] LAPIC 0x11 in XAPIC mode.
[INFO ] LAPIC 0x0 in XAPIC mode.
[INFO ] LAPIC 0x80 in XAPIC mode.
2. Call enable_x2apic() function on all CPUs (BSP and APs)
And at the end of #2 above, all cores will now switch to X2APIC
from XAPIC.
[INFO ] Initializing CPU #0
[DEBUG] CPU: vendor Intel device a06a0
[DEBUG] Clearing out pending MCEs
[INFO ] LAPIC 0x10 switched to X2APIC mode.
...
[INFO ] CPU #0 initialized
[INFO ] Initializing CPU #1
[DEBUG] CPU: vendor Intel device a06a0
[DEBUG] Clearing out pending MCEs
[INFO ] LAPIC 0x11 switched to X2APIC mode.
Note: Intel MTL FSP also follow the same steps for x2APIC enablement
while coreboot selects USE_INTEL_FSP_MP_INIT config instead
MP_SERVICES_PPI_V2.
BUG=b:219061518, b:219053812
TEST=Able to perform coreboot doing AP init with
DEFAULT_X2APIC_LATE_WORKAROUND config enabled without running into
any hang issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie9c8fad6c46b15b5b08c9cc4ef53f2a6872bd0ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65741
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit e54a8fd43247d767f16a37f3e3150b2915d809bc (soc/intel/meteorlake:
Add entry for GSPI2 device) added an entry for the GSPI2 device in the
devicetree, but did not add any other entries. Ensure that the rest of
the code is aware of the GSPI2 device to avoid any problems.
Change-Id: Ib59bd289751bd96402c4adc61ffbee3bebe0edb0
Found-by: Coverity CID 1490681
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id56310bd616cd19fee5dc934676006b2dc34b1ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65929
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit makes gsi_bases platform independent. It introduces two new
Kconfigs which set if there are IIO APICs on other devices than the PCH
or not, and where they do start.
Change-Id: I40db4a8fd90572757687f35bbd8eebd7229fc75a
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65531
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is based on the following Intel documents:
* 570805
* 570806
* 572062
* 571264
Change-Id: I199415902d26fa5341ef3212a9169836ea4df74a
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The validation process verifies that hardware components comply with
the standard hardware specifications. For instance, PCI express
implementation must comply with the hardware PCIe specification
requirements: Electrical, Configuration, Link Protocol and Transaction
Protocol. To perform these tests the hardware must be configured in a
particular state: some feature related to power management need to be
turned off, hot plug should be enabled...
This patch sets the appropriate FSP Updateable Product Data flags to
get the hardware in the proper configuration:
- Enable PCIe hotplug on all ports
- Set clock sources to run free
- Set the FSP compliance test mode flag
BUG=b:235863379
TEST=Compilation with and without the flag
Verify code path with instrumentation
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Ic07b9276121dfbd273a8f63a1f775ddbd3566884
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This config can be used to make coreboot configure the hardware to
meet compliance tests requirements. SoCs which support compliance
testing features should set the
SOC_INTEL_SUPPORTS_COMPLIANCE_TEST_MODE flag.
BUG=b:235863379
TEST=Successful compilation
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Iec760ae89e2b892ef45e6750e823ab5a8609d0fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
There is an ongoing effort to deprecate VBOOT_VBNV_CMOS, and replace it
with VBOOT_VBNV_FLASH [1]. Since SOC_INTEL_BROADWELL doesn't support
flash writes in early stages (BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES),
drop vboot as well as ChromeOS support for all broadwell boards,
including auron, jecht and wtm2.
[1] https://issuetracker.google.com/issues/235293589
BUG=b:235293589
TEST=./util/abuild/abuild -t GOOGLE_GUADO -a
TEST=./util/abuild/abuild -t GOOGLE_BUDDY -a
Change-Id: I002ab0f5f281c098afba16ada3621f1539c66d6b
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch adds GSPI2 (PCI device B0:D18:F6) entry into the chipset.cb.
Additionally, increases `CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX` value
to include GSPI2 as well.
BUG=b:224325352
TEST=Able to build and boot Google/Rex platform.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I901128a1773fc6d2ba87e3e4972f45ad4a754d35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65675
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Google uses two digit GPIO pad numbers for internal GPIO references
and Intel has updated their GPIO naming schemes too (see the GPIO
implementation worksheet #641238) so use double digit GPIO pad numbers.
Format -
"GPP_%c%02d", gpio_group, gpio_pad_num
e.g.
GPP_A0 -> GPP_A00,
GPP_V2 -> GPP_V02,
GPP_C9 -> GPP_C09 etc.
BUG=b:238196741
TEST=Able to build meteorlake based google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ieb7569c1a35b08c0970a604ec7b4b91e6179dd28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65719
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This change aligns the Meteor Lake TCSS functions of pad configuration
and Thunderbolt authentication through the sideband access.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I393f6e1c7d322878cbb684cd95bfa2477195b23a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use same log level as print_num_status_bits to make sure the
status bits are properly prefix and the newline is added.
Change-Id: Ib33798eec7cba601d0d49646c5fc429de5268417
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65715
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution")
Resolves:
https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/
5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing
the value at '_estack' into %esp rather than the address '_estack'.
Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia81b4397c92f100abad9b1e974bbebfe49008439
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=None
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I2eb6e94e5d87bb19b11e27461e2b5bdaee9d59bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65691
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=None
TEST=None
Change-Id: I7a4081f0f57e0faa968ad142debdc40a9e26dc9b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65690
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|