| Age | Commit message (Collapse) | Author |
|---|
|
Intel PDGs starting from Skylake / Sunrise Point state that, different
from the general recommendation in digital electronics, unconnected
GPIOs defaulting to GPIO mode do explicitly not require termination.
The reason for this is, that these GPIOs have the `GPIORXDIS` bit set,
which effectively disconnects the pad from the internal logic by
disabling the input buffer.
This bit - besides `GPIOTXDIS` - can also be set explicitly by using
the gpio macro `PAD_NC(pad, NONE)`.
In some cases, a pull resistor may be required due to bad board design
or when a vendor sets the RX/TX disable bits together with a pull
resistor and schematics are not available to check if the pad is really
unconnected or just unused. In this case the pull resistor should be
kept.
Pads defaulting to native functions usually don't need special handling.
However, when pads requiring external pull-ups are missing these due to
bad board design, they should be configured with `PAD_NC` to disconnect
them internally.
Rewrite the documentation to reflect these new findings.
Also clarify the comment in soc/intel gpio code accordingly.
Change-Id: Id01b197ebe8f2b8bb4ecf3d119ec2298b26d9be0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52139
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 6b5bc77c9b22c398262ff3f4dae3e14904c57366 (treewide: Remove "this
file is part of" lines) removed most of them, but missed some files.
Change-Id: Ib8e7ab26a74b52f86d91faeba77df3331531763f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
soc_memory_init_params() does not only configure memory init parameters.
Despite its name, it also configures many other things. Therefore, merge
it into its caller function platform_fsp_memory_init_params_cb() to
prevent confusions.
Built clevo/l140cu with BUILD_TIMELESS=1. coreboot.rom remains the same.
Change-Id: Id3b6395ea5d5cb714a412c856d66d4a9bcbd9c12
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
LPC, P2SB and Power Management controller are always needed. Thus,
enable them by default.
Change-Id: I20b8cbe536da70fccc3d11e1eedf4a5e14bfc862
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
We need to modify update CmdMirror and LpDdrDqDqsRetraining parameters
for ADLRVP board.
Allowing this parameters to be filled by devicetree will allow
flexibility to update values as per board designs.
Note that both UPDs are applicable for both DDR and Lpddr memory types.
BUG=None
BRANCH=None
TEST=Build works and UPD values have been filled correctly
Change-Id: I55b4b4aee46231c8c38e208c357b4376ecf6e9d9
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
On tgl, we noticed system hang if a shutdown is triggered before fsps.
The dut is unable to shutdown properly due to tcss is stuck before
tcss_init in fsps.
This change enable power button smi on jsl, tgl, adl after fsps.
it can also prevent a shutdown failure due to lack of fsps init on
certain ip.
BUG=b:186194102, b:186815114
TEST=Power on the system and pressing power button repeatedly doesn't
cause the system hang during shutdown.
Change-Id: I70b871f2676a89bc782116e02beba5c20ec51eef
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
If a power button SMI is triggered between where it is currently
enabled and before FSP-S exits, when the SMI handler disables
bus mastering for all devices, it inadvertently also disables
the PMC's I/O decoding, so the register write to actually go into
S5 does not succeed, and the system hangs.
This can be solved by skipping the PMC when disabling bus
mastering in the SMI handler, for which a callback,
smihandler_soc_disable_busmaster is provided.
BUG=b:186194102, b:186815114
TEST=Power on the system and pressing power button repeatedly doesn't
cause the system hang during shutdown.
Change-Id: I1cf5cf91ebad4a49df6679e01fc88ff60c81526c
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The CMOS option system does not support negative integers. Thus, retype
and rename the option API functions to reflect this.
Change-Id: Id3480e5cfc0ec90674def7ef0919e0b7ac5b19b3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit 8122b3f6123158024ed2844af17289a9abb98036.
This broke DMAR. DRHD defines the scope of the device entries below.
Change-Id: Iac4858f774fa3811da43f7697a9392daba4b4fba
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TGL boards using the Type-C subsystem for USB Type-C ports without a
retimer attached may require a DC bias on the aux lines for certain
modes to work. This patch adds native coreboot support for programming
the IOM to handle this DC bias via a simple devicetree
setting. Previously a UPD was required to tell the FSP which GPIOs were
used for the pullup and pulldown biases, but the API for this UPD was
effectively undocumented.
BUG=b:174116646
TEST=Verified on volteer2 that a Type-C flash drive is enumerated
succesfully on all ports. Verified all major power flows (boot, reboot,
powerdown and S0ix/suspend) still work as expected.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I70e36a41e760f4a435511c147cc5744a77dbccc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Required for accessing IOM REGBAR space.
Change-Id: Ic1c9beee69d184388f3e850744b3aeebe38eafbb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I97c00e1985f319ff1db57314723d8405c2a6cbd2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CPU can have its own Port IDs when addressing GPIO communities, which
differ from the PCH PCR IDs.
1) Add a field to `struct pad_community` that can hold this value when
known.
2) Add a function to return this value for a given GPIO pad.
Change-Id: I007c01758ae3026fe4dfef07b6a3a269ee3f9e33
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
GPIO communities 0, 1, and 4 have virtual wire indexes & bits for at
least some of their groups; add the known information into the community
definitions.
Change-Id: Icc4581e61ee904cbd998738962d360a58d24bc35
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52589
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some SoCs may define virtual wire entries for certain GPIOs. This patch
allows SoC code to provide the mappings from GPIO pads to virtual wire
indexes and bits when they are provided. Also a function
`gpio_get_vw_info` is added to return this information.
Change-Id: I87adf0ca06cb5b7969bb2c258d6daebd44bb9748
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52588
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables CrashLog for Intel ADL based platform.
BUG=b:183981959
TEST=CrashLog data generated, extracted, processed and decoded sucessfully on adl-m RVP.
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Change-Id: I15ba0b41f73c1772f09584f13bcf5585caa90782
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52454
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding GPIO definition for community 3 which is CPU reserved GPIO used
by CPU side PCIe root ports. We did not have this definition since
FSP used to program this GPIOs. Now, instead of FSP, coreboot programs
CPU PCIe GPIOs for CLKSRC and lanes to put GPIOs in native mode.
Thus adding definition of this virtual GPIOs in this CL.
BUG=None
BRANCH=None
TEST=Check if correct registers are being programmed
Change-Id: I481ea7e3ba948bf6d37b97d08c675a18ee68125d
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Earlier we did not have definition for BIT27 for PAD_CFG0 register, we
will use this BIT to enable "virtual wire messaging for native function"
If this bit is enabled, whenever change is detected on the pad, virtual
wire message is generated and sent to destination set by native function.
This bit must be set while enabling CPU PCIe root port programming for
ADL and thus defining a new macro to set native pad function along with
NAF_VWE bit to make GPIO programming easier from coreboot.
BUG=None
BRANCH=None
TEST=Code compilation works fine and if we use this macro to program
GPIO, proper bit is getting set in PAD_CFG register
Change-Id: I732e68b413eb01b8ae1a4927836762c8875b73d2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52782
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only use case for FSP-T in coreboot is for 'Intel Bootguard'
support at the moment. Bootguard can do verification FSP-T but there
is no verification on whether the FSP found by walkcbfs_asm is the one
actually verified as an IBB by Bootguard. A fixed pointer needs to be
used.
TESTED on OCP/Deltalake, still boots.
Change-Id: I1ec8b238384684dccf39e5da902d426d3a32b9db
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
From tests this does not lock down SMRAM and it's also not possible to
read back what is written, be it via PCI mmconfig or io ops. The
FSP integration can be assumed to be bogus on this point.
Change-Id: Ia0526774f7b201d2a3c0eefb578bf0a19dae9212
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51532
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PL2 override value is already declared under common code in power_limit.h file.
Removing this duplicate PL2 override from soc specific header file.
BRANCH=None
BUG=None
TEST=Built and tested on brya
Change-Id: I1424f36fbe038d478f4b8f6257d78d4a3ede3258
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The usage of `pci_devfn_t` here is misleading, as these intentionally
store the `PCH_DEVFN_*` macros so they can be used across `smm` and
`ramstage` without requiring the device model. Update to `unsigned int`
instead, as `pci_devfn_t` implies the data is an MMCONF-compatible PCI
devfn offset.
Change-Id: Ic8880de984e6eceda4cbe141e118f3a5fdd672a2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52808
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the recent switch to SMM module loader v2, the size of the SMM for
module google/volteer increased to above 64K in size, and thus failed to
install the permanent SMM handler. Turns out, the devicetree is all
pulled into the SMM build because of elog, which calls
`pci_dev_is_wake_source`, and is the only user of `struct device` in
SMM. Changing this function to take a pci_devfn_t instead allows the
linker to remove almost the entire devicetree from SMM (only usage left
is when disabling HECI via SMM).
BUG=b:186661594
TEST=Verify loaded program size of `smm.elf` for google/volteer is
almost ~50% smaller.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Kconfig change which enables the hwp cppc acpi support is to get the
maximum performance of each CPU to check and enable Intel Turbo Boost
Max Technology.
BUG=none
BRANCH=none
TEST=check GCPC and CPC generated in acpi tables for each CPU
Change-Id: I5d93774e8025466f1911cf77459910fe872bfcc8
Signed-off-by: ravindr1 <ravindra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51795
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update UPDs required for configuring VT-d.
TEST=Boot to kernel, load ChromeOS VM.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I96a9f3df185002a4e58faa910f867ace0b97ec2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51849
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`soc_vtd_resources` from the else-part is unused since Cannon Lake was
removed. Thus, drop it and that if-else-condition.
Change-Id: I21689d1eae6952a80c98096443e7506a1466c07e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove useless help texts since they don't add any more value.
Change-Id: Iabcaec1bc8abe2c4628105752e49247e946fcfe7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52786
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove useless help texts since they don't add any more value.
Change-Id: Id8a15681a98ceb648814662545f5a3bf0f14b95c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52777
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide a SOC_INTEL_SKYLAKE_LGA1151_V2 option to select correct defaults
for the combination of a Union Point PCH with LGA1151v2.
As of the year 2021 it's common for motherboards with Z370, H310C
or B365 PCHs, which are meant to be paired with Coffee Lake CPUs.
Intel provides AmberLakeFspBinPkg to support this combination,
which implements Intel FSP External Architecture Specification v2.1.
Details:
1) Provide SOC_INTEL_SKYLAKE_LGA1151_V2 option that selects
PLATFORM_USES_FSP2_1, SOC_INTEL_COMMON_SKYLAKE_BASE and
SKYLAKE_SOC_PCH_H.
2) Add Amberlake FSP support.
If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, use AbmerLakeFspBinPkg instead
of KabylakeFspBinPkg.
3) Enable Coffee Lake CPUs support.
If SOC_INTEL_SKYLAKE_LGA1151_V2 is set, select
MAINBOARD_SUPPORTS_COFFEELAKE_CPU.
4) Increase stack and heap size in CAR.
If FSP_USES_CB_STACK is set (it's selected by PLATFORM_USES_FSP2_1),
update DCACHE_BSP_STACK_SIZE and FSP_TEMP_RAM_SIZE values.
5) Update maximal number of supported CPUs.
If MAINBOARD_SUPPORTS_COFFEELAKE_CPU is set, set MAX_CPUS to 16.
Signed-off-by: Timofey Komarov <happycorsair@yandex.ru>
Change-Id: I7b6b9c676da55088cb5a12a218ea58d349ee440c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Z370, H310C and B365 PCHs use the same silicon as 200-series
PCHs and they are supported by soc/intel/skylake codebase
(not by soc/intel/cannonlake). Mentioned PCHs are meant to be paired
with Coffee Lake CPUs, so add the corresponding microcodes.
Signed-off-by: Timofey Komarov <happycorsair@yandex.ru>
Change-Id: I479c648e40c4c607d29f8cdd913fdbd6d7d7d991
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The code is already compiled in on all platforms. Use it as it provides
the same functionality. Note that GCAP is no longer R/WO on these
platforms. However, select `AZALIA_LOCK_DOWN_R_WO_GCAP` just in case.
This will be dropped in a follow-up.
Tested on Prodrive Hermes, still detects and initializes both codecs.
Change-Id: I75424559b2b4aca63fb23bf4f8d5074aa1e1bb31
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50795
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel document 335192-004 contains the PCI device IDs for Z370 and
H310C, but lacks the ID for B365. The ID appears on some websites:
https://linux-hardware.org/index.php?id=pci:8086-a2cc-1849-a2cc
Change-Id: Iea3c435713c46854c5271fbc266f47ba4573db52
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52703
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Taken from Intel document 334658-003 (7th Generation Intel Processor
Family I/O for U/Y Platforms and 8th Generation Intel Processor Family
I/O for U Quad Core Platforms, Datasheet - Volume 1 of 2).
Change-Id: I1d48c8868e1e5d453d599ecec835938ce09935d0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52702
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For brevity's sake, just print the PCH model.
Change-Id: Ib9e96683e3cb0b63a11344f3b5383292bff88e13
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52701
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code name for these PCHs is Union Point, abbreviated as `UPT`. There
are some 300-series Union Point PCHs (H310C, B365, Z370) which are meant
to be paired with Coffee Lake CPUs instead of Skylake or Kaby Lake CPUs,
and referring to them as `KBP` (Kaby Point, I guess) would be confusing.
Tested with BUILD_TIMELESS=1, HP 280 G2 remains identical.
Change-Id: I1a49115ae7ac37e76ce8d440910fb59926f34fac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52700
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These PCHs are used with Xeon-SP processors, which use different code.
Change-Id: I05f67cd57aa9f867e2fab88cd49e0384073a0b20
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52699
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 and Purism Librem 13 v1
remain identical.
Change-Id: I74b633fb0b012304b5b4bd943272ed82dcb6f7d5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52468
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove elog.c from EHL soc as EHL does not support chromebook and
hence does not need it.
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: If66adfe15d00feb0a7fb5e1ced92006a4adebdb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50173
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIOs are divided into different communities. Each community
consists of one or more GPIO groups. We need to configure the
groups in coreboot so that they are mapped properly.
GPIO communities should be properly configured in GPIO_CFG and
MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured
in GPIO_CFG register while the PMC_GPP_* in pmc.h.
GPIO communities in coreboot should match with the kernel gpio
communities also. Kernel reads the ASL file from coreboot. This
patch adds the proper community mapping in ASL code to match with
kernel code. In gpio_soc_defs.c file we are indexing the groups
correctly. In gpio.h file we define all the gpio devices as kernel
populates sysfs with separate gpio device for each community. This
patch is created based on Intel EHL PCH Datasheet with Document
number 614109 and Chapter 21.
Also update GPIO COM3 Port ID and 2 GPIO register values
(HOSTSW_OWN_REG_0 & PAD_CFG_BASE) respectively.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ifc609b3d6ab9ea2b807dc0f178ec99f95d2db4cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This change applies device ID from the SoC pci_devs.h directly.
BUG=None
TEST=Built image successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic5d2910ca53c02527aef0ad33ed52a35f2bdf7af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The VT-d specification states that device scope for remapping hardware
unit which has DRHD_INCLUDE_PCI_ALL flags must be the last in the list
of hardware unit definition structure. This change fixes the devices
list in the DMAR DRHD structure.
BUG=None
TEST=Built image successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I14c34ad66a5ee8c30acabd8fe5a05c22087f9120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52477
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change applies device ID from the SoC pci_devs.h directly.
BUG=None
TEST=Built image successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I0c3bd60c62664337429e6817d2cf54cf2e8d500b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add UPI locks as indicated by the Intel docs.
Change-Id: I9d1336e57f1776f3024883d6edcf0a855b1382c6
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add IMC locks as indicated by the Intel docs.
Change-Id: Id5c43711e80f4e2112c305a9b48d0a4c8509e89b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Jasperlake does not support TCSS. This change removes the TCSS
setting from the DMAR table.
BUG=None
TEST=Built image successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I573e2038fd76ac66af88125117774b40cc80c704
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52575
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add DPTF HIDs for thermal funcitonality for Alder Lake SoC.
BRANCH=None
BUG=None
TEST=Built and tested on adlrvp board
Change-Id: I8de58497fa800690d04abbdfe4d6abf1c0184334
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52268
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The VT-d specification states that device scope for remapping hardware
unit which has DRHD_INCLUDE_PCI_ALL flags must be the last in the list
of hardware unit definition structure. This change fixes the devices
list in the DMAR DRHD structure.
Change-Id: Ia5fedb6148409f9c72848c9e227e19bedebb5823
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
FSP does not set the MSR LT_LOCK_MEMORY when SkipMpInit=1. Therefore,
set LT_LOCK_MEMORY at end of POST, when native MP init is used, to
protect SMM in accordance to Intel BWG.
Test on clevo/cml-u: chipsec says LT_LOCK_MEMORY is locked.
Change-Id: Iaadd4996653c4f27d268b1c4773c1e2e86114912
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36356
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP takes care of setting the MSR LT_LOCK_MEMORY when SkipMpInit=0.
Thus, only set the lock when native MP init is used (SkipMpInit=1).
Change-Id: I2758e87c6370f3244416a3170cfafe6df757bb78
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The MSR LT_LOCK_MEMORY is package-scoped, not thread-scoped. Only set it
once.
Tested on Acer ES1-572 by checking chipsec results.
Change-Id: If3d61fcbc9ab99b6c1b7b74881e6d9c6be04a498
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds an enum to configure the audio related UPDs used for
configuring the audio over HDMI/DP and rename a variable for better
readability.
TEST=On shadowmountain audio sound cards are detected and listed by the
Linux kernel. Audio playback and capture is working fine.
Change-Id: I2834d6f4ce1651a609c5563af375f6e365d931fa
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
FSP uses PchHdaAudioLink{Hda|Dmic|Ssp|Sndw}Enable UPDs to configure
GPIO pads for audio. However, mainboard is expected to perform all
GPIO configration in coreboot and hence these UPDs must be set to
0. There is no need to expose these UPDs in chip.h and provide
mainboard an option to set these in devicetree.
This change drops PchHdaAudioLink{Hda|Dmic|Ssp|Sndw}Enable UPDs from
chip.h and the corresponding devicetree in mainboards. Currently,
shadowmountain already set these UPDs to 0, whereas adlrvp set these
to 1. But all the ADL boards are correctly configuring the GPIO pads
for audio, so this change should not impact audio for any of these
boards.
BUG=b:183482000
TEST=adlrvp and shadowmountain build successfully.
Change-Id: I90e4eb5cc242a789800f4c9f8c71e9d8c8a2becf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52559
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All related mainboards are setting DIMM_SPD_SIZE to 512. Therefore,
default to 512 in the SoC Kconfig and drop it from related mainboard
Kconfigs.
Change-Id: Idb6a0e42961eeb490afd76b4aa7d940961991733
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52513
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the PAM0123 lock as indicated by the Intel documentation.
This is set is finalize to allow any part of coreboot to update
the PAM prior to booting.
Change-Id: I3cdb7fc08eb903d799d585c56107de92f034b186
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When using references to a FieldUnit, DeRefOf is not used when storing a
value into the referenced FieldUnit, only when reading its value.
Tested on out-of-tree Compal LA-A992P, Linux 5.11.15-arch1-2 no longer
spews errors like these in dmesg:
ACPI Error: Needed type [Reference], found [Integer] 000000006cbcc5d8 (20201113/exresop-66)
ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [And] (20201113/dswexec-431)
ACPI Error: Aborting method \_SB.PCI0.LPD0 due to previous error (AE_AML_OPERAND_TYPE) (20201113/psparse-529)
ACPI Error: Aborting method \_SB.PCI0.I2C0._PS0 due to previous error (AE_AML_OPERAND_TYPE) (20201113/psparse-529)
Change-Id: I60c40452f8b5bdbec76264b578957396de8676ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The `PrmrrSize` FSP-M UPD is set using `get_valid_prmrr_size()`. As the
devicetree option's value is not used anywhere, drop it.
Change-Id: Ib6fb77b03a4648adbd8b23c160cfba94d142a2d2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Use `sizeof(value)` instead of manually calculating the buffer size.
Change-Id: Ibe49e40b1c4f2c0b661d94e59059a95bdb204197
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
rotine ---> routine
Change-Id: I21a71f52d2ec7a05ea3dadf30e8f3e8dac07d168
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Replace CONFIG(CHROMEOS) with CONFIG(CHROMEOS_NVS) for cases where
the conditional and dependency are clearly about the presence of
an ACPI NVS table specified by vendorcode. For couple locations also
CONFIG(HAVE_ACPI_TABLES) changes to CONFIG(CHROMEOS_NVS).
This also helps find some of the CONFIG(CHROMEOS) cases that might
be more FMAP and VPD related and not about ChromeOS per-se, as
suggested by followup works.
Change-Id: Ife888ae43093949bb2d3e397565033037396f434
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50611
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include the PCIE RTD3 driveri for Alder Lake SoC.
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I4732e4663feff503b249b76aaf70ec142a888963
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52195
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CONFIG_MAX_PCIE_CLOCKS renamed to MAX_PCIE_CLOCK_SRC to make it clear that this config
is for the number of PCIe Clock sources available which is different from PCIe clock reqs.
This is more relevant in alderlake, as the number clock source and clock reqs differ.
However since this is a better name, renaming it throughout the soc/intel tree.
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I747c94331b68c4ec0b6b5a04149856a4bb384829
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52194
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Idab9419487e6e4cbdecd2efaa4772ff4960c9055
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
No definition exists for pmc_set_disb() and rtc_failure() is not called.
Change-Id: I3a68e1fc55c62193735a46caf9f70dd9ee0b7349
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Move code that gets used in stages other than ramstage to pmutil.c and
only build pmc.c in ramstage. This is done for consistency with other
platforms.
Change-Id: Iefb4fc86f3995ee6f259b7b287e04f7f94d8d025
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Commit 2c26108208e4aa48de21be576ab6cad9286d7934 moved this function to
pmutil.c for Tiger Lake. Do this to all other platforms for consistency.
For Skylake, __SIMPLE_DEVICE__ preprocessor guards are no longer needed.
With this change, pmc.c is only needed in ramstage. Adjust Makefile.inc
accordingly, and drop ENV_RAMSTAGE guards from Skylake.
Change-Id: I424eb359c898f155659d085b888410b6bb58b9ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
To drop bad __SIMPLE_DEVICE__ usage and for consistency with newer
platforms, move pmc_set_disb() to pmutil.c and adapt it accordingly.
Change-Id: I1a137b5b3120c350a04273567b9cb18c9a42a543
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: I8bc170bd715e13d46fcedc0f796e2a99786791c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The VT-d specification states that device scope for remapping hardware
unit which has DRHD_INCLUDE_PCI_ALL flags must be the last in the list
of hardware unit definition structure. This change fixes the devices
list in the DMAR DRHD structure.
BUG=b:185631878
TEST=Built image and booted to kernel on Voxel board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I408fac7ff1185f4aa87bc4ffac7f25e31a4802b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I05f724785880089a513319d70dfd70fc2a6b7679
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We had the addrspace_32bit rdev in prog_loaders.c for a while to help
represent memory ranges as an rdev, and we've found it useful for a
couple of things that have nothing to do with program loading. This
patch moves the concept straight into commonlib/region.c so it is no
longer anchored in such a weird place, and easier to use in unit tests.
Also expand the concept to the whole address space (there's no real need
to restrict it to 32 bits in 64-bit environments) and introduce an
rdev_chain_mem() helper function to make it a bit easier to use. Replace
some direct uses of struct mem_region_device with this new API where it
seems to make sense.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ie4c763b77f77d227768556a9528681d771a08dca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Reuse `dev` pointer for SmbusEnable configuration and remove `smbus`
pointer.
Change-Id: I7ad7cdeb632eb52ae02b60ca51e7d4845dffdb0d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move the function declaration of parse_devicetree() out of the if-else
preprocessor condition.
Change-Id: I6974554711e4cc2bb944bff14fc057ef6945c888
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
parse_devicetree() just calls parse_devicetree_param(). To be aligned
with other platforms, remove it and rename parse_devicetree_param() to
parse_devicetree().
Change-Id: I1128ab709cfdb02bbdb505c3f22f5433a30cb3c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52488
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This option is not mainboard-specific, and should be user-visible.
Change-Id: I9ff2ca984cd238a112af4efd7685f142cc6e5459
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This comment is most likely a copy-paste leftover from Braswell.
Change-Id: I49bfa3cc56539df0b47d2e2bd74b2bfc45421034
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: I0d5fa4451b356970cf9843a76d0fa4d2af4307da
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change-Id: I2caa9cbb812e17f041c15654aef756e41fb71398
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change-Id: I06f9c623947e48a7213e42507f4da51c12b425d7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: Ie2f02b9934d843c29d17a72a6bf3b2bae91ce8d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: Ic16fd74d4ddf96e29bcdada671dab0e590af74ef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Change-Id: I93f7918763d87f8fb50f39f9469694e73aeff37b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: I536a104428ae86e82977f2510b9e76715398b442
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CB:31250 ("soc/intel/cannonlake: Configure GPIOs again after FSP-S is
done") introduced a workaround in coreboot for `soc/intel/cannonlake`
platforms to save and restore GPIO configuration performed by
mainboard across call to FSP Silicon Init (FSP-S). This workaround was
required because FSP-S was configuring GPIOs differently than
mainboard resulting in boot and runtime issues because of
misconfigured GPIOs.
This issue has since been fixed in FSP (verified with FSP v1263 on
hatch). However, there were still 4 boards in coreboot using
`cnl_configure_pads()`. As part of RFC CB:50829, librem_cnl, clevo/cml-u
and system76/lemp9 were tested to ensure that this workaround is no
longer required.
This change drops the workaround using `cnl_configure_pads()` and
updates all mainboards to use `gpio_configure_pads()` instead.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Angel Pons <th3fanbus@gmail.com>
(Tested purism/librem_cnl)
Tested-by: Michael Niewöhner <foss@mniewoehner.de>
(Tested clevo/cml-u which is similar to system76/lemp9)
Change-Id: I7a4facbf23fc81707cb111859600e641fde34fc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52248
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the SATA and SSATA REGLOCK as indicated by the Intel documentation.
Change-Id: I90e6d0e3b5a38bcd5392e26cbbb6dc4aa6a8304b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set MSR locks as indicated by the Intel documents.
The following MSRs settings are locked:
MSR_FEATURE_CONFIG AES enable/disable lock
TURBO_ACTIVATION_RATIO_LOCK
This also adds PARALLEL_MP_AP_WORK to enable running on APs to set
each CPU MSR.
Change-Id: Iacf495f0880d42b378cb0d2c37940d50a511c430
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change implements `gpio_snapshot()` and `gpio_verify_snapshot()`
callbacks that are useful for debugging any GPIO configuration changes
across FSP-S. These can be utilized by all Intel SoCs that make use of
the common block GPIO driver.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I82a1f125c490b9d6e26e6e9527c2fcd55bb9d429
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Add the following locks as recommended by the Intel docs:
DRAM_POWER_INFO_LOCK
PCU_CR3_FLEX_RATIO_LOCK
TURBO_ACTIVATION_RATIO_LOCK
PCU_CR0_PMAX_LOCK
Change-Id: I8d8211977e87109a91790a4070454fc561aa761b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Call the SMM finalize SMI. Adds SMM_FEATURE_CONTROL setting to enable
MCHK on code fetch outside SMRR and the register lock as recommended
by the BWG.
Change-Id: Ie3b58d35c7a62509e39e393514012d1055232d32
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51651
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Rocky Phagura
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the flash PRR3 and PRR4 lock to be set with SPI FLOCKDN.
Change-Id: I288eea3e0e853e5067c5af23e22eab79330c0f20
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51779
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need to change OC pin for type C USB3 ports and it depends
on the board design. Allowing it to be filled by devicetree will
make it easier to change the mapping based on the board design
BUG=b:184653645
BRANCH=None
TEST=compilation works fine and value of UPD is getting reflected.
Change-Id: I61faa661c12dced27c6cdd7005a61ae8de8621e1
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Create acpi table for x2apic nmi, apic_ids
BUG=None
BRANCH=None
TEST=boot to OS and check apic mode
cat /proc/cpuinfo | grep "apicid"
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I9399d30b686b55d86806f5db4110bf4a80fe459b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch changes the Intel MMA driver to use the new CBFS API.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Icc11d0c2a9ec1bd7a1d6af362f849dac16375433
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
DPTF HIDs are different per-platform going forward, so refactor these
into SoC-specific structures which the DPTF driver can query at runtime
for platform-specific information.
Change-Id: I6307f9d28f4274b851323ad69180ff4ae35053da
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This option is not referenced anywhere. Drop it.
Change-Id: Ie59de5399a9b1713109bf334d4ad1d7f7efb91f9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52104
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check TBT NVM FW Ready (INFR) bit to skip D3Cold for TBT when device
is in disconnected state.
Not adhering this recommendation is blocking the S0ix state transition.
BUG=b:183670327
TEST=S0ix state transition occurs with TBT disconnected.
Change-Id: Ib9b9ceee4393aeba37fdcb4e05d1b279a6ff72d2
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Use VPD variable "fsp_dimm_freq" to select DDR frequency limit.
Tested=On OCP Delta Lake, DDR frequency limit can be changed via VPD.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I1232feae5090420d8fa42596b46f2d4dcaf9d635
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
This change hooks up the new gpio operations in DNV-NS.
Change-Id: I2179e641153da7230467c5766e4ded58fdb90292
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48618
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This option's value is not used anywhere. Remove it.
Change-Id: I0f30cddd30d459f48b51f377b111bbc04709c5f8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
It is zero for all mainboards. If one really wanted to ignore VT-d
support, a user-visible Kconfig option would be a better approach.
Change-Id: I320c10317f3fabee5443c16ebdf1ffd0e24193b8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Commit 0591348833f730a42e74039d8e2d957ec94a39d5 introduced this Kconfig
option inside soc/intel/common scope. However, it was only hooked up in
commit d74cd60b8159c3928dba318e6387f200ff3bb0e7 for Alder Lake, and in
commit 99157c1f4a80556462ca22a4ade87b2c8d09e674 for Tiger Lake. Hook up
the `SOC_INTEL_DISABLE_IGD` Kconfig option to all other platforms which
have the `InternalGfx` UPD.
Change-Id: Icd1379a835b445a6d4b028ebde5a3e355ee5b67b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52100
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
