summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2020-11-19soc/intel/common/acpi: move S0ix UUID to the conditionMichael Niewöhner
Move the UUID to the condition, since there is no need to assign a name when it is only used once. Also add a comment to make clear that the functions inside that condition are only used by the Low Power Idle S0 functionality, while the PEPD in general can be present on boards without S0ix capability, too. For details check CB:46469. Change-Id: Ic62c37090ad1b747f9d7d204363cc58f96ef67ef Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46468 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: drop the southridge scope around PEPDMichael Niewöhner
PEPD will get included directly in the southbridge. Thus, drop the scope around it. Change-Id: Icb7a40e476966a7aca36bee055ee71d181508b87 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47246 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-18soc/intel/common: Move CSE RW into new FMAP region to optimize boot timeSridhar Siricilla
CSE RW blob which will be used by coreboot to update CSE's RW partition, is packed part of FW_MAIN_A and FW_MAIN_B. This will increase the size of FW_MAIN_A and FW_MAIN_B. So, accordingly load and hash calculation of FW_MAIN_A (or FW_MAIN_B) increases during verstage. It increases the boot time by around 300ms. The patch address the boot time by pulling CSE RW blob outside of FW_MAIN_A and FW_MAIN_B. So, it creates new FMAP region within RW_SECTION_A and RW_SECTION_B and adds CSE RW blob in the new regions (ME_RW_A and ME_RW_B) as a CBFS file. Boot Time Measurement details when CSE RW blob is added in the ME_RW_A and ME_RW_B. -------------------------------------------------------- | Platform | Old Boot Time | New Boot Time | -------------------------------------------------------- | JSL | 1.3s | 1.06s | -------------------------------------------------------- | TGL | 1.63s | 1.36s | -------------------------------------------------------- Changes: 1. Makefile change to accommodate CSE RW blob into ME_RW_A/ME_RW_B 2. Kconfig change to define CBFS name and default file name for RW blob metadata. 3. CSE Lite Driver BUG=b:169077783 TEST=Verified on JSL & TGL platforms Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If043c9cb99fb822b62633591bf9c5bd75dfe8349 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Generate the CSE RW metadata and add to FW_MAIN_A/BV Sowmya
In the existing implementation CSE RW metadata file is generated by scripts and to avoid incompitable issues between coreboot and the scripts this patch adds the follwing changes, * Move the metadata generation to the coreboot Makefile. * Add CBFS component type struct to create a metadata file during the compile time. * Extract the CSE RW version from SOC_INTEL_CSE_RW_VERSION config and update the major, minor, hotfix and build versions using the compile time flags. * Compute the hash of CSE RW binary in hex format using the openssl and use the HASH_BYTEARRAY macro to convert the 64 character hex values into the array. * Add the me_rw.metadata cbfs file to FW_MAIN_A and FW_MAIN_B regions. BUG=b:169077783 TEST= Built for dedede. Verify that metadata file was generated and added to the FW_MAIN_A/B. Extracted it using cbfstool and verfied that metadata was generated properly. Change-Id: I412581400a9606fa17cf4398faffda923f07b320 Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig to enable the CSE FW Update featureV Sowmya
Add the Kconfig to enable the CSE FW Update feature and also to ensure all the configs are set by the mainboards to enable this feature. This config by default disables the CSE FW update feature for JSL and TGL platforms. It will be enabled after splitting and including the CSE RW and CSE RW metadata blobs in the CBFS. BUG=b:169077783 Change-Id: I12810031224f79aba8a4057725ae0ed5a9b36d7e Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-18soc/intel/common: Add Kconfig for CSE RW firmware versionV Sowmya
This patch adds a kconfig SOC_INTEL_CSE_RW_VERSION to pass the CSE RW firmware version from the mainboard. This will be extracted by makefile to update the cse_rw_metadata structure. Right now the required tool to extract the CSE RW version from the blob is still under development and after the official version of the tool is released, version will be extracted by parsing the CSE RW blob. BUG=b:169077783 Cq-Depend: chrome-internal:3402224, chrome-internal:3397863, chromium:2473603, chromium:2473603, chromium:2535950 Change-Id: I62691ee3ede7d4cd21f821381f5d1519f9061fd9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47430 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17soc/intel/xeon_sp: Fix SKX SATA drive boot issueMarc Jones
SKX FSP doesn't support X2APIC setup, but CPX does. The CPX DMAR table needs the X2APIC opt out flag set. This fixes the hang loading a kexec'd kernel. The change is easy to see in the coreboot output: [DMA Remapping table] Flags: 0x3 or in the DMAR ACPI table. Change-Id: Iec977c893b70e30875d9a92f24af009c1e90389e Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-16src: Update some incorrect config options in commentsMartin Roth
This is a trivial patch to fix some comments that were generating notes in the kconfig lint test. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I26a95f17e82910f50c62215be5c29780fe98e29a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47366 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/denverton_ns: Generate ACPI DMAR TableJulien Viard de Galbert
- Write ACPI DMAR Table if VT-d is enabled. - The entries are defined to follow FSP settings. Change-Id: I263b03b96280599266d4c5e193583ecdfe9697b7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25446 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16soc/intel/xeon_sp: Synchronize DMAR and MADT IOAPIC id'sArthur Heymans
Add a soc specific callback for getting the IIO IOAPIC enumeration ID. Tested on ocp/deltalake. Change-Id: Id504c2159066e6cddd01d30649921447bef17b12 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-16soc/intel/broadwell/systemagent.c: Rename to `northbridge.c`Angel Pons
Change-Id: Id1a0e02174456bb25df0721cfd3865645641a01a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-16lp4x: Add new memory parts and generate SPDsDavid Wu
This change adds the following memory parts to LP4x global list of available LP4x parts and to the global JSON file containing LP4x parts and their characteristics. 1. H9HCNNNCRMBLPR-NEE 2. H9HCNNNFBMBLPR-NEE 3. MT53D1G64D4NW-046 WT:A BUG=b:172751925,b:172781673,b:172782100,b:172781562 TEST=cd <path_to_coreboot_src>/util/spd_tools/lp4x && ./gen_spd <path_to_coreboot_src>/src/soc/intel/tigerlake/spd \ global_lp4x_mem_parts.json.txt "TGL" Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I37702770f707fe078920694468552c5db59c478f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47350 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/cnl: enable ACPI CPPC entries generationMichael Niewöhner
Enable CPPC entries generation, needed for Intel SpeedShift. Test: dumped SSDT from Clevo L140CU and checked decompiled version Change-Id: I0c8066a31d3bec27776836aac54c335c0e5d74e6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47541 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/common/block: add code for ACPI CPPC entries generationMichael Niewöhner
Copy the code for CPPC entries generation, needed for Intel SpeedShift, from SKL to common ACPI code. SKL is going to use common ACPI code, too, in the future, so this code duplication will vanish soon. Test: dumped SSDT from Clevo L140CU and checked decompiled version after enabling CPPC entries via Kconfig Change-Id: I1fcc2d0d7c6b6f35f8dd011f55dab8469be99d47 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45535 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-14soc/intel/xeon_sp: Improve generating PCH IOAPIC MADT entryArthur Heymans
The PCH IOAPIC ID is 0x8 so it needs to be generated before the IIO IOAPICs. Since we will get rid of the ioapic_id array this makes it more readable. Change-Id: I64a3b259e438ef666fb68a433cceda10aebdb1bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
The option `HeciEnabled` was partly replaced by use of the device on/off state in the devicetree in commit 3de90d1. The option has been removed from the corresponding boards, so `HeciEnabled` is always 0 and ME always gets disabled during soc finalize, when `HECI_DISABLE_USING_SMM` is set. Replace the option in the finalize function by the same dt state check that sets the FSP option and drop the remaints of `HeciEnabled`. Devicetrees still having `HeciEnabled` have been adapted to keep the current behaviour. Change-Id: Ib4cca9099b9aa3434552a41fbafca7cf6a0dd0eb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47195 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/tigerlake: Add code for early tcssBrandon Breitenstein
In order for USB Type-C idisplays to be detected prior to loading Kernel PMC IPC driver is needed to communicate with PMC in order to correctly set the USB Mux settings. This patch is adding in support for early detection of both Displays. BUG=b:151731851 BRANCH=NONE TEST=built and verified that TCSS MUX is being set on Volteer Change-Id: I58e66f21210d565fb8145d140d2fc7febecdd21a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42079 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/xeon_sp/acpi.c Loop over HOB stack for MADT generationArthur Heymans
To align MADT generation with DMAR, we loop over HOB entries instead of over copied HOB entries fetched from get_iio_stacks(). This makes it easier to see what is going on. Tested on ocp/deltalake Change-Id: I8ffe0322bb182b7ec5887354ec801e1f9f3d3288 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/xeon_sp: move get_iiostack_info() to a common placeArthur Heymans
All this function does is looping over IIO stacks in the FSP HOB. The only 'SOC/FSP specific' thing is the way to detect if the stack is an IIO stack so add a callback to determine this. Change-Id: I4fa9c54d50279213a4174186a23c3cc156e21c9a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/xeon_sp: Change the return type of get_iio_stack_info()Arthur Heymans
The somewhat unrelated return value makes the function harder to understand and the return type is not consistently used. Use a different helper function to get the HOB Pci64BitResourceAllocation data. Change-Id: I9a03cbb0ebbb48cc052d4c082d359c0087aaeb3e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-13soc/intel/common/block/acpi: add Kconfig for CPPC entries generationMichael Niewöhner
Change-Id: Ieae9f221ffb27cf52cab21a130e18aa3929caea3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47540 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: drop duplicate PM ACPI timer disablingMichael Niewöhner
FSP already disables the PM ACPI timer, when EnableTcoTimer=0. Test: clevo/l140cu and supermicro/x11ssm-f have the PM ACPI timer disable bit set when EnableTcoTimer=0. Change-Id: If370d3acf87ae6d1d7c64bf27228877cdd92ab2d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13soc/intel/common: add Kconfig to enable/disable the ACPI PM timerMichael Niewöhner
Currently, the ACPI PM timer state gets set in devicetree by the option PmTimerDisabled. However, it is not board design dependent. Thus, add a user-selectable Kconfig option. Disabling the PM ACPI Timer is only valid when PM Timer emulation is supported and is only possible, when there is a hardware PM Timer (APL does not have one for example). SoCs, where the hardware PM Timer can be disabled must select `PM_ACPI_TIMER_OPTIONAL`. This new Kconfig gets used in the follow-up commits of this series. Change-Id: I7f607f277eb14f84a7370ffb25a13226e7ccc917 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13soc/intel/broadwell: Split up acpi.cAngel Pons
Change-Id: Ie9c57b6f5c226cee8797027941fa03e69de52923 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46796 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Flatten northbridge folder structureAngel Pons
Having folders for bootblock and romstage is no longer necessary. Change-Id: I7d1f4063de6a1a1ff9ee7478e94f889a50102054 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46795 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Relocate CPU filesAngel Pons
Change-Id: Ib2ddce78db21db9c8deac632a77ecd71eb9887c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46794 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Flatten `acpi_init_gnvs` functionAngel Pons
Instead of relying on mainboards to call it, do like Lynx Point. Change-Id: Idb7457e0734e19d0a26f0762079e273b6e740475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46793 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Factor out `acpi_fill_madt` functionAngel Pons
It is identical for all Broadwell mainboards, thus deduplicate it. Change-Id: I74559fbe42e44aa4d15ced5d88f6c15a1bf5203b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46792 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/acpi: Rename `systemagent.asl`Angel Pons
Rename it to `hostbridge.asl`, which is what Haswell uses. Change-Id: I6f97fc5c9459fe6b66dcfcf51900c751beda0ebe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi/hda.asl: Rename to `audio.asl`Angel Pons
This is merely to ease diffing Lynx Point and Broadwell ASL code. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: I9f6ab98388d2a2915a48377ebe9e724cfee4b95f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46779 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi: Clean up cosmeticsAngel Pons
Use ASL 2.0 syntax where possible and uniformize code style to match the IASL disassembly. Some `Store` in gpio.asl change the binary if touched. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: Ic13c081fd7ee2212d851cc14263c1e2fd8970072 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46778 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/xeon_sp: Tidy up adding MADT ioapic entriesArthur Heymans
Add a helper function to print out debug info and add the MADT entry. Change-Id: I1a00f87c6edef530c5352929ee9279782be4b112 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-12soc/intel/xeon_sp: Use a common function to get the IIO HOBArthur Heymans
TESTED ocp/deltalake still boots. Change-Id: I69f336c1ff348b8e820340b84494929f2c58ce72 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47296 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12soc/intel/alderlake: Add PCH ID 0x5181Subrata Banik
List of changes: 1. Add new PCH ID 0x5181 into device/pci_ids.h 2. Update new PCH ID into common lpc.c 3. Add new PCH ID description into report_platform.c TEST=Able to build and boot ADLRVP with new PCH ID. Change-Id: I4343b7343876eb40c2955f6f4dd99d6446852dc0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-11mb/google/volteer: Configure IA32_L3_MASK_x MSRs for L3 CQOSShreesh Chhabbi
Selecting USE_CAR_NEM_ENHANCED_V1 as of now. This selection in Kconfig programs IA32_L3_MASK_1 (0xc91) & IA32_L3_MASK_2 (0xc92). These will select ways for eviction & non-eviction. TGL will have to switch back to USE_CAR_NEM_ENHANCED_V2 once the IA32_L3_SF_MASK_1 (0x1891) & IA32_L3_SF_MASK_2 (0x1892) programming requirements are understood. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ifc77856e26ab26f9fbb2693f70c751f43337421b Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-11soc/intel/tigerlake: Update Kconfig for NEM Enhanced ModeShreesh Chhabbi
This change switches the selection of CAR mode so that INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by mainboards using older silicon (ES1 or ES2) that did not support NEM enhanced mode. This enables NEM Enhanced Mode for TGL-U/Y RVPs. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10soc/intel/tigerlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 BRANCH=volteer Change-Id: Ib3d0bf33d780444f8240f749a3319212c985950d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10soc/intel/jasperlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is logged into the event log for one of the internal devices eg. USB bluetooth. 8 | 2020-11-05 15:04:16 | S0ix Enter 9 | 2020-11-05 15:04:29 | S0ix Exit 10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8 11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109 12 | 2020-11-05 15:05:08 | S0ix Enter 13 | 2020-11-05 15:05:14 | S0ix Exit 14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8 15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109 Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/skylake: Enable PCH thermal depending on devicetreeBenjamin Doron
Hook up PCH thermal subsystem configuration to devicetree. Change-Id: I84bac2cec079370370ecf1e5e4742e6704921d40 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09soc/intel/jasperlake: Enable Intel FIVR RFI settingsMaulik V Vaghela
We already have RFI UPD settings to mitigate RFI noise issues in platform. These UPDs were not getting filled via devicetree but needed to be filled from fsp_params.c Exporting these UPDs to chip.h will allow OEM/ODMs to fill it directly from devicetree and also allow us to control it based on boards instead of keeping it common across SoCs. BUG=b:171683785 BRANCH=None TEST=Compilation works and we're able to fill UPD from devicetree.Value gets reflected in FSP UPDs. Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/xeon_sp: Don't add memory resource twiceMarc Jones
The resource function is called for each device VID/DID. Only add the memory resource map from the boot CPU (bus 0) and not for each socket/CPU. This is a NUMA architecture and has a shared memory map. All the resources must match across the sockets/CPUs, so they should only be added to the map once. Change-Id: Ia336f604441ae8d30b8418300da7c34ab9907cae Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-09soc/intel/xeon_sp: Move set_bios_init_completion()Marc Jones
Move set_bios_init_completion() and helper functions from skx and cpx soc_util.c to xeon common util.c. There are some slight differences between skx and cpx, so used the more correct cpx functions. Both cpx and skx platforms boot as expected. Change-Id: Ie416b3a43ccdd14a0eb542786593c2eb4d37450f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47172 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/xeon_sp: Look up the IIO_HOB only onceArthur Heymans
The HOB does not move, place its location in .bss. Change-Id: I2c6dbe4d64138e45fa1dfe7580ffa70d0441bd88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47294 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Correct GPIO pad sequence for community pad groupMaulik V Vaghela
In gpio.c file, we have community group array for each comm, representing gpio groups within that community. Like there might be group H,D, VGPIO and C within community 1. Community also may have some reserved gpio and we also define those in an array which indicates OS can't use those GPIO (through PAD_BASE_NONE) Now when we define reserved pads in the middle of actual community pads, it creates an issue while calculating an offset for GPIO host own pad register. This is because function actually checks current gpio index (lets say vgpio_39 in our case) and tries to get group index from an array which we have defined. If we have defined reserved gpios in between 2 communities, index calculated will also account for reserved GPIO and register offset calculation will move to next set of register (offset 0xC instead of offset 0x8). Because of this coreboot won't configure HOST_OWN_PAD register correctly and driver will not be able to get non-SMI interrupts for related gpio. Align pad group as per EDS and pin-ctrl driver in linux kernel. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=VGPIO community index is correctly calculated. Drawlat board boots fine with this change and warm reset also works. Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/jasperlake: Update reserved GPIO names in gpio_soc_defs.hMaulik V Vaghela
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting this GPIOs with proper name to align with EDS volume 2 Also removing unused GPIOs at the end of community 4 (group E). Since those reserved GPIOs are at the end of the community, it won't affect the offset calculations within community. This change will also help us aligning pad numbering with kernel pin-ctrl drivers too. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=Platform boots fine and basic functionality such as SD, Wifi works. Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/tigerlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icebcac3b69c605ecf6df37733b641397ea3c3ad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/common/acpi: create pep.asl from lpit.aslMichael Niewöhner
Copy lpit.asl to pep.asl to have a clean patch series without moving files and to be able to keep the replace-patch CB:46471 as small as possible to avoid confusion. Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09intel/common/pmc: Add functions for IPC mailbox in ACPIDuncan Laurie
This change adds two functions that provide an IPC mailbox method via ACPI for runtime clock configuration. pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT that can be called by other ACPI devices to send an IPC mailbox command. This function is exported because some SOCs override the default PMC device and need to call this function to write the method into the SSDT. pmc_acpi_set_pci_clock() will call the method defined by the previous function to enable or disable the PCIe SRCCLK for a specified root port and clock pin. It can be called by the PCIe root port after turning off power to the attached device. BUG=b:160996445 TEST=boot on volteer device and disassemble the SSDT to ensure that this method exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/tigerlake: Utilize vbt data size Kconfig optionSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib in drivers/gma. This change makes use of Kconfig option to pick the size for tigerlake. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09acpi: Call acpi_fill_ssdt() only for enabled devicesKarthikeyan Ramasubramanian
Individual drivers check whether the concerned device is enabled before filling in the SSDT. Move the check before calling acpi_fill_ssdt() and remove the check in the individual drivers. BUG=None TEST=util/abuild/abuild Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-09soc/intel/xeon_sp/skx: Reorder soc_util.cMarc Jones
Reorder soc_util.c and remove the un-needed #if ENV_RAMSTAGE to match cpx version in preparation for more de-duplication. Change-Id: Iab343e903e2478709fe91739c9ca77f587286df7 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-07mb/intel: Enable ALC711 Audio codec over SNDW0 linkSridhar Siricilla
The patch enables ALC711 Audio codec. Test=Verified on ADL RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-06soc/intel/xeon_sp/skx: Fix MADT CPU indexesMarc Jones
The CPU index wasn't getting updated. Confirm MADT sets IOAPIC and CPU ID numbers. Change-Id: I72430cc48f4609ac408e723172ba1ed263cca8e3 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-06soc/intel/xeon_sp: Move CPU helper functionsMarc Jones
Continue Xeon-SP de-duplication. Move CPU helper functions from skx/ and cpx soc_util.c to common util.c. Functions only used by util.c are updated to be static. The following functions are moved: int get_threads_per_package(void); int get_platform_thread_count(void); const IIO_UDS *get_iio_uds(void); unsigned int soc_get_num_cpus(void); void get_core_thread_bits(uint32_t *core_bits, uint32_t *thread_bits); void get_cpu_info_from_apicid(uint32_t apicid, uint32_t core_bits, uint32_t thread_bits, uint8_t *package, uint8_t *core, uint8_t *thread); void xeonsp_init_cpu_config(void); Change-Id: I118a451b9468459cf2c2194f31da1055e1435ebe Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47170 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/intel/xeon_sp/cpx: Reorder cpu.c .h includesMarc Jones
Clean up the header includes. Change-Id: I9f61d1a82b37bc0ed803967dc64decf18f44adc9 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-11-05soc/intel/tigerlake: Disable C1 C-state DemotionRavi Sarawadi
Disable C1 C-state auto demotion to decrease SoC power usage. When set, processor will conditionally demote C3/C6/C7 requests to C1 based on uncore auto-demote information. BUG=b:161215906 TEST=Measure and confirm SoC power usage reduction for key use cases eg 'Google Meets video call' Measured on instrumented boards for Volteer EVT and Delbin. Below measurements for Volteer: Google meets with 720p w/ auto-demotion w/o auto-demotion System Power 13.14W 9.4W SOC Power 7.9W 5.4W Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Shweta Malik <shweta.malik@intel.com> Change-Id: I649cafbaf03917d76521aa5f76ec58d218e1a1b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-05soc/intel/xeon_sp: Use common cpu/intel romstage entryArthur Heymans
This removes some boilerplate like starting the console and also adds a "start of romstage" timestamp. Change-Id: Ie85df5d244fa37c41f0b3177ca325c607fa54593 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04soc/intel/broadwell: Merge `device_nvs.asl` into `globalnvs.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: If5f1feb0cd43fe1e0514b4e3fa766da60e2b7603 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46773 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Include EC and IRQ links ACPI earlyAngel Pons
Other southbridges such as Lynx Point do it. This eases merging later. Change-Id: I10196bbc44ce859c2747755845378351f45944ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46766 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch: Use common PCIe ACPI codeAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I1f41ce943e25dceab79c7d7ee2ed797c392dcd52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46763 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi: Add PCIe register offsetsAngel Pons
These are present in common southbridge ACPI code, and also exist on Broadwell. Thus, add the definitions to align with common ACPI code. Change-Id: Ib0ad9da80920fe7c70986e541c50f6adccb49d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46761 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/gma.c: Align struct with HaswellAngel Pons
Change-Id: Ifd1fb02497e1d326b6b9c5752f471f52b145a8ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-04soc/intel/broadwell: Use common irqlinks.aslAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9179c1b449925cc66628fc3266652b8237ab49e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46759 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi/irqlinks.asl: Add missing IRQsAngel Pons
Commit 2e1f764 (sb/intel/common/acpi/irqlinks.asl: Add missing IRQs) added these IRQs for Lynx Point and earlier southbridges. Follow suit for Broadwell, since it also supports them. Vendor firmware of the Asus X555LAB laptop also contains these IRQs, as per the disassembled DSDT. Change-Id: If857352dd25ba61c1f09c1ff4358efafdc3a5c73 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46758 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Align ACPI with Haswell/LynxpointAngel Pons
Drop unnecessary smbus.asl in favor of southbridge common code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I13b35d2155a2cede0a56846b8bf8a79d4ebfc7b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46757 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/xeon_sp: Add a smm_region functionArthur Heymans
This reports where TSEG is located and will be used when setting up SMM. Change-Id: I9a89cc79b08e2dcf1ffb91aa27d92c387cc93bfd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04soc/intel/xeon_sp: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I43e36f2e736192603be61519d3e185605e81f0e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04soc/intel/skl,acpi/acpigen: convert global CPPC package to local oneMichael Niewöhner
Move the global CPPC package \GCPC to the first logical core CP00 and adapt the reference in the other cores. This is cleaner and avoids confusion. Test: dumped SSDT on Supermicro X11SSM-F and verified decompiled version Change-Id: I40b9fd644622196da434128895eb6fb96fdf254d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04soc/intel/xeon_sp: Pass IIO_RESOURCE_INSTANCE as pointerJacob Garber
IIO_RESOURCE_INSTANCE is a large struct, so it should be passed as a constant pointer rather than making a copy. Found-by: Coverity CID 1432759 Change-Id: Iebbb4d292f4d956e767bda28cbf20b0318586510 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46729 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/xeon_sp/cpx: Align coreboot CAR symbols to FSP-TArthur Heymans
The CAR set up by FSP-T is at base 0xfe800000 and has a 0x200000 size. FSP-M seems to have a very large stack usage so it would overflow other car symbols located below the coreboot stack such as timestamps and the pre-ram console, which are now fixed. TEST: boot with ocp/deltalake. Change-Id: I886f9391ad79fcfa0724109393e3781a08d954b4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46895 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/{tgl,jsl}: Enable logging of wake sources for S0ixFurquan Shaikh
This change adds elog.c to smm-y for Tiger lake and Jasper Lake platforms to enable the logging of wake sources in eventlog for S0ix. BUG=b:172272078,b:169731044 BRANCH=volteer TEST=Verified on volteer that wake sources are correctly logged for S0ix: 8 | 2020-11-02 13:54:27 | S0ix Enter 9 | 2020-11-02 13:54:33 | S0ix Exit 10 | 2020-11-02 13:54:33 | Wake Source | RTC Alarm | 0 11 | 2020-11-02 13:54:49 | S0ix Enter 12 | 2020-11-02 13:54:54 | S0ix Exit 13 | 2020-11-02 13:54:54 | Wake Source | Power Button | 0 14 | 2020-11-02 13:55:04 | S0ix Enter 15 | 2020-11-02 13:55:10 | S0ix Exit 16 | 2020-11-02 13:55:10 | Wake Source | GPE # | 112 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1c40dfba6c82ca45a21d35c5a2725e4d30855d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47141 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/broadwell: Relocate PCH ACPI filesAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I7f87085c70149d02c544e2d43e1bdb58c7502d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46754 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03Revert "broadwell: Switch to using common ACPI _SWS code"Angel Pons
This reverts commit 81a4c85acf664156bb68807f681cd40928bf8267. Reason for revert: Blocks merging Haswell and Broadwell together. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I29c4ad9174ab84c7e9111daa0491ede9e1d639b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46734 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/xeon_sp/acpi: Fix uncore dsdt for multiple cpusMarc Jones
Fix the asl to use CONFIG_MAX_CPUS to create entries for multiple cpu uncores. Don't add the RTxx resource entries multiple times. The function is called for each CPUs. Change-Id: Ia4eb9716ae4bd72fb4eb98649105be629623cbef Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47060 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/xeon_sp; Use soc specific stack-port functionMarc Jones
Separate the get_stack_for_port into soc specific functions. This removes a #if in common code. Change-Id: Ib38a7d66947ded9b56193a9163e5128b2523e99c Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-03soc/intel/common/block/systemagent/memmap.c: Align cached regionAngel Pons
When asked to place cbmem_top(), FSP does not seem to care about alignment. It can return an address that is MTRR poison, which will exhaust all variable MTRRs when trying to set up caching for CBMEM. This will make memory-mapped flash and TSEG caching fail as well. Safeguard against this by aligning the region to cache to half of its size, and move it upwards to compensate. It is assumed that caching memory above the provided bootloader TOLUM address is inconsequential. TEST=Boot Purism Librem Mini WHL, observe no MTRR exhaustion error messages in console. The boot process also feels more fluid. Change-Id: Ic64fd6d3d9e8ab4c78d68b910a476f9c4eb2d353 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-03soc/intel: Select SOC_INTEL_COMMON_BLOCK_CAR as per alphabetical orderSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7adf430e6ce5f78f68a0c73af841fbdc62bb5dc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47057 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel: Use of common reset code blockSubrata Banik
This patch removes all redundant reset code block from each SoC and make use of common reset code block(fsp_reset.c) based on SOC_INTEL_COMMON_FSP_RESET. Respective SoC Kconfig to choose correct FSP global reset type as per FSP integration guide. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I71531f4cf7a40efa9ec55c48c2cb4fb6ea90531f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/common: Create common Intel FSP reset code blockSubrata Banik
Create SOC_INTEL_COMMON_FSP_RESET Kconfig to have IA common code block to handle platform reset request raised by FSP. The FSP will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that a reset is required. Make FSP_STATUS_GLOBAL_RESET depends on SOC_INTEL_COMMON_FSP_RESET. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I934b41affed7bb146f53ff6a4654fdbc6626101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/denverton_ns: Add PCH_DEVFN_PMC for finding PMC deviceDuncan Laurie
In order to support the common PMC functions this device needs to be able to be located with the common lookup macro. BUG=b:160996445 TEST=build intel/harcuvar board Change-Id: If04a82582c07c15bf841d0baa84e31561d211502 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46642 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel/jasperlake: Set the GpioOverride configurationRonak Kanabar
Set "GpioOverride" config to override FSP gpio configuration. FSP will not configure any GPIOs and rely on GPIO settings programmed before moved to FSP. BUG=b:150666058 TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: Ia4036cf0be3a6036d70920743958dc327a652077 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45901 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel/fsp-car: Use the coreboot defined stackArthur Heymans
The stack needs to be in the coreboot defined region to not collide with other symbols. Change-Id: I02a379d2ac73ae30239bd45859c3f09de1a9d0e0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-02soc/intel/xeon_sp/bootblock.c: Report the FSP-T outputArthur Heymans
Change-Id: I03841f8263203ee306f83b8f8e859ec03edc3bd3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46885 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02drivers/intel/fsp2_0: Add function to report FSP-T outputArthur Heymans
This allows to compare the FSP-T output in %ecx and %edx to coreboot's CAR symbols: Change-Id: I8d79f97f8c12c63ce215935353717855442a8290 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/common/cse: Add dependency on SOC_INTEL_CSE_LITE_SKUFurquan Shaikh
This change adds the dependency on SOC_INTEL_CSE_LITE_SKU for the following configs: 1. SOC_INTEL_CSE_FMAP_NAME 2. SOC_INTEL_CSE_RW_CBFS_NAME 3. SOC_INTEL_CSE_RW_FILE These configs aren't really useful for platforms not using CSE Lite SKU. Change-Id: Id48ab36b7e75301d50122916d153f494d755ae77 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46905 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02soc/intel: Add a driver for CNVi WiFi/BT controllersFurquan Shaikh
This change adds a common block driver for CNVi WiFi/BT controllers in Intel SoCs. This driver uses the common PCI dev operations in addition to generating ACPI device node and returning ACPI name for the controller device. This change also selects this driver for CML, GLK, ICL, JSL and TGL. Change-Id: I69a832be918d4b9f4fbe3a40913d4542a457a77c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30soc/intel/xeon_sp: Call common soc_get_num_cpus()Marc Jones
Use a common function to get the number of CPUs for each soc. This removes a #if for different function names in the common code. Change-Id: I3348d37fcae72247731e465ec2a65d9583a2f180 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_xp: Combine cpx and skx acpi.cMarc Jones
Prepare for common ACPI. Combine cpx and skx acpi.c into a single file in xeon_sp. This is almost the last step in using common/block acpi. Change-Id: I5f40eb7909bb796907682c548219c7515f2ae4d1 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46600 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp/skx/acpi.c: Update with cpx changesMarc Jones
Prepare for common ACPI. This primarily makes the skx madt table generation match cpx. There are a few other small changes to remove unused code and make the files match. Change-Id: I71a59181226d79c40a4af405653c50c970fb720b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46599 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/tigerlake: Enable TCSS XHCI device and define port aliasesDuncan Laurie
Enable the USB4 XHCI driver and remove the ACPI name entry from the SOC level function. Define aliases for the USB2/3 ports on north and south XHCI devices in chipset.cb so they can be referenced in the mainboard devicetree. BUG=b:151731851 TEST=define usb ports by reference in volteer devicetree and ensure they get properties added in SSDT for both north and south XHCI device. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I724ca874d3a3f6a2b43a700b0b10f77f25c53ee0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-30soc/intel/common/block/usb4: Add TCSS XHCI driver for SSDT generationDuncan Laurie
In order to generate ACPI entries for USB devices attached to the USB4/TBT/TCSS/North XHCI device it needs to have a driver that will enumerate static devices on the bus. This driver does that and nothing else. BUG=b:151731851 TEST=boot on volteer and check for USB devices on \_SB.PCI0.TXHC.RHUB Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I5a2ff1cd1bed557e793d45119232cf87032ddd7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46851 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp: Move read_msr_ppin() to common util.cMarc Jones
Move CPX and SKX read_msr_ppin() to common util.c file. Update drivers/ocp/smbios #include to match. Change-Id: I4c4281d2d5ce679f5444a502fa88df04de9f2cd8 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_sp: Move common chip.c codeMarc Jones
Move common CPX and SKX chip.c code to chip_common.c. Change-Id: I158882ab15659858c2b13b4a3e02a26ef8d4ed3c Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_sp/skx: Simplify pci_domain_read_resourceMarc Jones
Use a simpler pci_domain_read_resource for the stacks. This makes it the same as the cpx function, since both get the stack information from the FSP. This will be merged with common xeon cpx/skx in a later patch. Change-Id: I0130ce671fe9ff04e48021a0c5841551210aa827 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46308 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 15:42:04 +0000