summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Expand)Author
2015-12-08soc/intel/skylake: Remove obsolete Kconfig symbolsMartin Roth
2015-12-06fsp_baytrail: Add missing newline to eMMC Mode logBen Gardner
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
2015-12-04braswell/skylake: Add FspUpdVpd.h to fix compilationStefan Reinauer
2015-12-03intel/skylake: Add ACPI device for audio controllerDuncan Laurie
2015-12-03intel/skylake: Remove unused code to add SSDT2Duncan Laurie
2015-11-30fsp_baytrail: Remove use of BAYTRAIL_SMM Kconfig symbolMartin Roth
2015-11-28baytrail: fix missing brackets around ir_base to fix IRQ routingAlexander Couzens
2015-11-27soc/intel/common: Fix whitespace in KconfigMartin Roth
2015-11-24intel/soc/baytrail: Move MCRS ResourceTemplate out of _CRS methodMartin Roth
2015-11-24soc/intel/braswell: Drop gfx_read_resources()Nico Huber
2015-11-21baytrail: add C0 and D0 stepping decodeBen Gardner
2015-11-20intel/skylake: Fix flash_controller.c compilationStefan Reinauer
2015-11-20intel: Add MMA feature in corebootPratik Prajapati
2015-11-20fsp1_0: Remove hardcoded microcode locationsMartin Roth
2015-11-17fsp_baytrail: use external microcode .h filesMartin Roth
2015-11-16intel/fsp_baytrail: Load APs microcode in baytrail_init_cpusYork Yang
2015-11-16intel/fsp_baytrail: Load BSP microcode in bootblockYork Yang
2015-11-13intel/skylake: ensure the RTC time is setAaron Durbin
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
2015-11-09fsp_baytrail: Add functions to set a GPIOWerner Zeh
2015-11-05Kconfig: Remove obsolete Kconfig symbols from google/intel boardsMartin Roth
2015-11-05intel/skylake: Add Fan control supportSumeet Pawnikar
2015-11-05skylake: Set Pkg Power clamping bit in Power Limit MSRRizwan Qureshi
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-28intel/skylake: Add USB2 port config for max settingsDuncan Laurie
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
2015-10-27FSP1_1: Always use common codeLee Leahy
2015-10-27FSP 1.1: Replace soc_ prefix with fsp_Lee Leahy
2015-10-27FSP 1.1: Move common FSP codeLee Leahy
2015-10-27intel/kunimitsu FAB3: Configure LPC to Quiet Mode.pchandri
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
2015-10-27intel/skylake: FSP 1.7.0 MemoryInit/SiliconInit params updateRizwan Qureshi
2015-10-27intel/kunimitsu Fab3: Strengthening Rcomp target CTRL valuepchandri
2015-10-27intel/skylake: Add support for Gfx PEIM (AKA GOP)robbie zhang
2015-10-27fsp/intel common: Add support for Gfx PEIM (AKA GOP)robbie zhang
2015-10-23Intel: Move MCRS ResourceTemplate outside of _CRS methodMartin Roth
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
2015-10-15soc/intel/broadwell: fix USBDEBUG copy-pastaGeorg Wicherski
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
2015-10-14skylake: ACPI: Fix compiler warnings with iasl-20150717Duncan Laurie
2015-10-11skylake: add support for verstageAaron Durbin
2015-10-11soc/intel/common: use prog_locate() for finding fsp.binAaron Durbin
2015-10-11skylake: Leave SPI controller enabledLee Leahy
2015-10-11skylake: SPI code cleanupLee Leahy
2015-10-11intel fsp1_1: prepare for romstage vboot verification splitAaron Durbin
2015-10-11soc/intel/common: remove chipset specific callsAaron Durbin
2015-10-11intel SOC common: Remove unused parametersLee Leahy
2015-10-11Braswell: Modify CB to accomodate new FSPv83Subrata Banik
2015-10-11Skylake: remove the out-dated VR config and un-needed 24mhz calibrationrobbie zhang
2015-10-11skylake: ajdust cache-as-ram region to 64KiBAaron Durbin
2015-10-11intel: update common and FSP cache-as-ram parametersAaron Durbin
2015-10-07cbfs: add struct cbfsfAaron Durbin
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
2015-10-04drivers/uart/Kconfig: Select 8250 mem when 8250 mem32 is enabledAlexandru Gagniuc
2015-10-01intel/fsp_baytrail: Remove unused MICROCODE_INCLUDE_PATH from KconfigWerner Zeh
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
2015-09-29skylake: select HAVE_INTEL_FIRMWAREAaron Durbin
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
2015-09-28skylake: Work around issue in ACPI interpreterDuncan Laurie
2015-09-28skylake: ACPI: Remove Configurable TDP support codeDuncan Laurie
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
2015-09-23chromeos: vboot and chromeos dependency removal for sw write protect statePaul Kocialkowski
2015-09-22coreboot: introduce commonlibAaron Durbin
2015-09-17broadwell: Switch to using common ACPI _SWS codeDuncan Laurie
2015-09-17braswell: Switch to using common ACPI _SWS codeDuncan Laurie
2015-09-17skylake: Use common ACPI _SWS codeDuncan Laurie
2015-09-17Skylake: update C state latency and power numbersrobbie zhang
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
2015-09-17intel/common: Add common code for filling out ACPI _SWSDuncan Laurie
2015-09-16Move final Intel chipsets with ME to intel/common/firmwareMartin Roth
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
2015-09-10intel/skylake: HAVE_UART_MEMORY_MAPPED doesn't exist anymorePatrick Georgi
2015-09-10skylake: Move ACPI init to SOC instead of mainboardDuncan Laurie
2015-09-10intel/common: Print board ID if enabledDuncan Laurie
2015-09-10skylake: Enable DPTF based on devicetree settingDuncan Laurie
2015-09-10Skylake: Print GPIO MMIO base and pad config using gpio_debug tokenSubrata Banik
2015-09-09skylake: dptf: Add TSR3 thermal sensor and CPU code cleanupDuncan Laurie
2015-09-09braswell: acpi: Allow DPTF thresholds to be defined at board-levelShawn Nematbakhsh
2015-09-09intel/skylake: ACPI: Clean up formatting in and fix ASL codeDuncan Laurie
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
2015-09-08skylake: igd: clean up igd.cDuncan Laurie
2015-09-08braswell: Tristate CFIO 139 and CFIO 140Ravi Sarawadi
2015-09-08Skylake:Set DISB inside romstage after mrc initDhaval Sharma
2015-09-08skylake: Clean up chip.hDuncan Laurie
2015-09-08skylake: Apply USB2 and USB3 port enable/disable settingsDuncan Laurie
2015-09-08skylake: Remove dead codeLee Leahy
2015-09-08skylake: refactor flash_controller codeAaron Durbin
2015-09-08skylake: move flash_controller.h to the proper placeAaron Durbin
2015-09-08skylake: fix eventlog on resume pathAaron Durbin
2015-09-08skylake: allow timer_monotonic_get() in all stagesAaron Durbin
2015-09-08skylake: ACPI: Clean up GPIO controllerDuncan Laurie
2015-09-08skylake: ACPI: Clean up and fix XHCI ACPI DeviceDuncan Laurie
2015-09-08skylake: ACPI: Remove SerialIO ACPI mode codeDuncan Laurie
2015-09-08skylake: ACPI: Move storage controllers to separate fileDuncan Laurie
2015-09-08skylake: ACPI: Remove itss.asl and cleanup irqlinks.aslDuncan Laurie
2015-09-08skylake: iomap: Remove unused RCBA regionDuncan Laurie
2015-09-08skylake: PCR: Add Port ID for SCSDuncan Laurie
2015-09-08skylake: ACPI: Add functions for PCR accessDuncan Laurie
2015-09-08skylake: ACPI: Clean up pch.aslDuncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:58:07 +0000