| Age | Commit message (Collapse) | Author |
|---|
|
Support the I2C interfaces on this SOC using the Intel common lpss_i2c
driver. The controllers are supported in pre-ram environments by
setting a temporary base address in bootblock and in ramstage using
the naturally enumerated base address.
The base speed of this controller is 133MHz and the SCL/SDA timing
values that are reported to the OS are calculated using that clock.
This was tested on a google/reef board doing I2C transactions to the
trackpad both in verstage and in ramstage.
Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15480
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for the soc_acpi_name() handler in the device operations
structure to translate a device path into ACPI name.
In order to make this more complete add some missing devices in
include/soc/pci_devs.h.
Change-Id: I517bc86d8d9fe70bfa0fc4eb3828681887239587
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15479
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Have the Skylake SOC generate ACPI timing values for the enabled I2C
controllers instead of passing it in the DSDT with static timings.
The timing values are generated from the controller clock speed and
are more accurate than the hardcoded values that were in the ASL which
were originally copied from Broadwell where the controller is running
at a different clock speed...
Additionally it is now possible for a board to override the values
using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then
the kernel will generate its own timing using the same forumla, but if
the SDA hold time value is zero the kernel will NOT generate a correct
value and the SDA hold time may be incorrect.
This was tested on the Chell platform to ensure all the I2C devices on
the board are still operational with these new timing values.
Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide the initial NHLT support for the following hardware:
1. 2 channel digital microphone array
2. Dialog 7219 headset
3. Maxim 98357 speaker amplifiers.
The code utilizes the Intel SoC common NHLT support.
Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15504
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nvs.h header is the one which defines global_nvs_t proper.
Don't rely on an indirect inclusion.
Change-Id: I89d6a73f65e408c73f068b4a35b5efd361a6e5d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15503
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Every other platform has global_nvs_t as a typedef. For some
reason apollolake didn't bother following current conventions.
Fix this omission to allow for better code sharing and consistency.
Change-Id: Id596eed517737759a64ce803c89ea2a05cbe2cce
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15502
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch exposes a function to read pmc bar.
PMC bar is read in function read_pmc_mmio_bar which
is defined static in file pmutil.c. This patch exposes
that functionality to call it from other files.
BUG=chrome-os-partner:53438
TEST= Read the PMC bar value properly from outside
pmutil file.
Change-Id: I26ee13e6ab95d3a8991c7f8ea4b3856ceb015d10
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If there is an external 16550 like UART, one needs to enable
the appropriate address ranges before console_init() is called
so that the init sequence can reach the external UART. Otherwise
the UART will only start working in ramstage and will produce
unreadable characters in romstage due to the lack of initialization.
Tested-on: Siemens MC_BDX1
Change-Id: Iafc5b5b6df14916c5ed778928521d4a8f539cf46
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15495
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
More spaces missed in review.
Change-Id: I842da05ca6ad4f2c13d2d42433e41da57ccf7f96
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15500
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nhlt_soc_serialize() and nhlt_soc_serialize_oem_overrides()
functions should be able to be leveraged on all Intel SoCs
which support NHLT. Therefore provide that functionality and
make skylake use it.
Change-Id: Ib5535cc874f2680ec22554cecaf97b09753cacd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15490
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Utilize the new NHLT helper functions by driving the NHLT
endpoints through data descriptors.
Change-Id: I80838214d3615b83d4939ec2d96a4fd7050d5920
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15488
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Whitespace fix for improper space usage for indention.
Change-Id: Ia6470bf152c57786d2d7f3d35bbf0609a2ee3ba2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15487
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Change PCI macros in such a way they can be transparently used across
romstage and ramstage.
Change-Id: Idc708c1990f2fc1d941bb82efcb0a697524f2eca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15483
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
New UPDs added to header files as well as many comment fixes. Memory
infor is now defined in FspmUpd.h and added ability to skip CSE RBP
for coreboot. Removes some UPDs that are no longer available from
source.
BUG=chrome-os-partner:54677
BRANCH=none
TEST=built and tested with FSP 143_10 version
Change-Id: I7e1f531ebbe343b45151a265ac715ae74aeffcad
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15459
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I22a33e6027a4e807f7157a0dfafbd6377bc1285d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15461
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add address and length of NHLT table in ACPI.
Change-Id: Ic0959a8aae18d54e10e3fcd95bfc98a6b6e0385a
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15025
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add the audio controller device to ACPI and define the _DSM handler
to return the address of the NHLT table, if set in NVS.
Change-Id: I619dbfb562b94255e42a3e5d5a3926c28b14db3e
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15026
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This will allow kernel to trigger a APM SMI to enable\disable SCI
Change-Id: I1be79b7a3082c23fbaf204eff55360c46458e325
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15347
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Parse the devicetree and pass the unused device to fsp
for disabling the device function.
BRANCH=none
BUG=chrome-os-partner:54325
TEST=device off in devicetree should disable the device.
Change-Id: I784b72a43fda13aa17634bf680205ab2d36e8d09
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15337
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add support for vboot_platform_prepare_reboot which is called whenever
vboot requests reboot of the platform. SLP_TYPE needs to be set to S5 in
such conditions since the platform would no longer be in a resuming
state after reset.
Change-Id: I01392bfda90c9274cd52c1004555d250b1d539b7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15340
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement writeat and eraseat support into the region_device_ops struct.
Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15318
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Id49319ec6b52648b03eaeddfdd1580dd82110fb9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15336
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Call basic FSP reset handling in FspNotify stage. Handling of reset requests
for other stages need to be implemented as well.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=with FSP that returns reset codes, do cold boot, check
that reboot sequence occurs properly.
Change-Id: I55542aa37e60edb17ca24ac358b61df72679b83e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15280
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Global reset enable bit is not cleared on reset. Therefore, clear
the bit early. Lock down 0xcf9 so that payload/OS can't issue
global reset.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15199
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some features of PMC needs to be accessed before romstage. Hence,
move PMC BARs setup into bootblock.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I14493498314ef1a4ce383e192edccf65fed2d2cb
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15332
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Apollolake defines Global Reset where Host, TXE and PMC are reset.
During boot we may need to trigger a global reset as part of platform
initialization (or for error handling). Add functions to trigger
global reset, enable/disable it and lock global reset bit.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15198
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Looks like we need to do real cold reset in some FSP flows, so
reverting this.
This reverts commit 6f762171de4b8514fddd430052cbf24524e09e5d.
Change-Id: Ie948d264c4e2572dab26fdb9462905247a168177
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15331
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I3400611095978421c7b35a7ea9c68b8571942ae9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15138
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I6afcc17ec8511d3fd4c1ac3b15d523d9b6752120
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15321
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
get_bios_size returns the value of bios_size. Use this function to
calculate bios_size for caching in bootblock.
BUG=chrome-os-partner:54563
Change-Id: I2e592b1c52138bd4623ad2acd05c744224a8e50b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15292
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I72f894fd14bf0e333d9fda970397a3c82de598c3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15121
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Without RELOCATABLE_RAMSTAGE have WB cache large enough
to cover the greatest ramstage needs, as there is no benefit
of trying to accurately match the actual need. Choose
this to be bottom 16MiB.
With RELOCATABLE_RAMSTAGE write-back cache of low ram is
only useful for bottom 1MiB of RAM as a small part of this gets used
during SMP initialisation before proper MTRR setup.
Change-Id: Icd5f8461f81ed0e671130f1142641a48d1304f30
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15249
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of hard-coding the BIOS region start and end addresses, read
BIOS_BFPREG to determine the base and limit for the mapped BIOS
region.
BUG=chrome-os-partner:54563
Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15269
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:54563
Change-Id: I56bc6b5292aec676103a436048abee8577edd961
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15268
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This makes it clearer that the read/write operations are being performed
on the host controllers registers.
Change-Id: Id63d778a4a03c461d97e535c34b85ada3ae469de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15281
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This makes the name consistent with other region device init macros.
Change-Id: I248894ba6c85326b615dcb71e8f498bc8be50911
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15277
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
spi_read_status reads the status register using hardware sequencing and
returns 0 on success and -1 on error. Use spi_read_status to return
appropriate value for get_sw_write_protect.
BUG=chrome-os-partner:54283
Change-Id: I7650b5c0ab05a8429c2b291f00d4672446d86e03
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15266
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
chrome-os-partner:54589
Change-Id: I5bdd417ed2f7ec013aeb8a0d4a9de57b1ad564a1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15276
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
spi_init should be run early enough in ramstage so that any init
calls (e.g. mainboard_ec_init) that write on flash have right
permissions set.
Change-Id: I9cd3dc723387757951acd40449d4a41986836d2a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15235
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Bootblock:
- Temporary BAR needs to be assigned for SPI device until PCI
enumeration is done by ramstage which allocates a new BAR.
- Call spi_init to allow bootblock/verstage to write/erase on flash.
Ramstage:
- spi_init needs to run in ramstage to allow write protect to be
disabled for eventlog and NVRAM updates. This needs to be done pretty
early so that any init calls(e.g. mainboard_ec_init) writing to flash
work properly.
Verified with this change that there are no more flash write/erase
errors for ELOG/NVRAM.
BUG=chrome-os-partner:54283
Change-Id: Iff840e055548485e6521889fcf264a10fb5d9491
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15209
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
|
|
This I2C controller has separate registers for different speeds to set
specific timing for SCL high and low times, and then a single register
to configure the SDA hold time.
For the most part these values can be generated based on the freq of
the controller clock, which is SOC-specific. The existing driver was
generating SCL HCNT/LCNT values, but not the SDA hold time so that is
added.
Additionally a board may need custom values as the exact timing can
depend on trace lengths and the number of devices on the I2C bus. This
is a two-part customizaton, the first is to set the values for desired
speed for use within firmware, and the second is to provide those
values in ACPI for the OS driver to consume.
And finally, recent upstream changes to the designware i2c driver in
the Linux kernel now support passing custom timing values for high
speed and fast-plus speed, so these are now supported as well.
Since these custom speed configs will come from devicetree a macro is
added to simplify the description:
register "i2c[4].speed_config" = "{
LPSS_I2C_SPEED_CONFIG(STANDARD, 432, 507, 30),
LPSS_I2C_SPEED_CONFIG(FAST, 72, 160, 30),
LPSS_I2C_SPEED_CONFIG(FAST_PLUS, 52, 120, 30),
LPSS_I2C_SPEED_CONFIG(HIGH, 38, 90, 30),
}"
Which will result in the following speed config in \_SB.PCI0.I2C4:
Name (SSCN, Package () { 432, 507, 30 })
Name (FMCN, Package () { 72, 160, 30 })
Name (FPCN, Package () { 52, 120, 30 })
Name (HSCN, Package () { 38, 90, 30 })
Change-Id: I18964426bb83fad0c956ad43a36ed9e04f3a66b5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=None
TEST=Build with <soc/gpio.h> included in mainboard.asl
Change-Id: Id6fdc50d09c014f930fdfd5c2fde0df827ad5181
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/15272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2545fc184ebfaa006a75783bf3d55f009066eed3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15110
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not masking any bits in Operating System Capabilities, which means we
support all the capabilities that OS passed in Arg3
Change-Id: Ib87915e18e305db41b52891ac5430201dda64bb5
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15021
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Required EHCI state is maintained as a CAR_GLOBAL to have it
properly migrated.
Change-Id: I8df413bec6faae4952670710c8ac804e0331c966
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15236
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I2539e490e160e01cab2ad8d2086d2f242a88c640
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15223
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I36056af9f2313eff835be805c8479e81d0b742bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15196
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Offsets start from 0 instead of 1. Fix this in the gnvs definitions.
BUG=chrome-os-partner:54342
Change-Id: Id6766a8766ef430d19ffcb801bfab43d38de37db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15180
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
CBMEM console stores all the console logs in CBMEM. Address of this
location in CBMEM where console logs are stored needs to be passed up to
OS using GNVS.
1. Add CBMC to GNVS fields in globalnvs.asl
2. Add cbmc member to global_nvs_t structure in nvs.h
3. Initialize gnvs->cbmc to address of cbmem console
BUG=chrome-os-partner:54342
Change-Id: Idcd4573e626fa433c1623bdcbe29921de64539b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15177
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected.
This is the first piece in supporting FSP 2.0. Move esraminit from
romstage into the bootblock. Replace cache_as_ram with
car_stage_entry.S and code in romstage.c
TEST=Build and run on Galileo Gen2
Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15132
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable uses of a common bootblock_pre_c_entry routine. Pass in TSC
value as a uint64_t value.
TEST=Build for amenia and Galileo Gen2
Change-Id: I8be2e079ababb2cf1f9b7e6293f93e7c778761a1
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15124
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <lpleahyjr@gmail.com>
|
|
If a bridge has the primary bus equal to the secondary bus the
busmaster_disable_on_bus() will infinitely call itself. Avoid the
inifinite recursion by checking current bus number against the
secondary bus number.
BUG=chrome-os-partner:54262
TEST=Ran on reef. Able to actually get the chipset to assert SLP_Sx
signals which means no more infinite recursion.
Change-Id: I52b21fbba24e6a652ea8f9f87f5f49f60109c8f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15157
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Like other boards there will likely be information needed from
GNVS in the SMM handler. Therefore, it's important that the point
is stashed accordingly.
BUG=chrome-os-partner:54275
TEST=Noted GNVS messages from SMM console on reef.
Change-Id: If12b69731330a1e0af7f8fe880635e5ffd02d715
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15152
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The UART support is needed in SMM in order for DEBUG_SMI to
function.
BUG=chrome-os-partner:54262
TEST=Ran on reef with DEBUG_SMI enabled. Can observed SMI messages.
Change-Id: Ibd6b12e27d5776046b400adf72f24133b9e54af8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15151
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It appears that PM1 is not wired up to the SMI status register, but
it does definitely cause SMIs to trigger. Therefore, provide a fake
PM1 status bit by checking the power button status when SMI status
is indicating no status as well as the PM1 control indicating that
SCI mode is not enabled.
BUG=chrome-os-partner:54262
TEST=Smashed power button on reef to cause SMI in firmware. No longer
loops infinitely with constant SMIs firing.
Change-Id: I9aa1b5f79b651cbc19a2d3353d9ef65429386889
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15155
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide the bit definitions for the SMI status register. Also,
utilize them which means deleting some of the handlers that can't
exist because there are no status bits.
BUG=chrome-os-partner:54262
Change-Id: I389c7cb3cad01ba0eca52a337ffee352a2010bfa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15154
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Due to USB LDO issue in current steppings, cold reboot needs to be
temporarily disabled. Thus, hard_reset call should be the same as
soft_reset.
Once future steppings are available INTEL_COMMON_RESET can be enabled again.
Change-Id: If0ec56db3864d500acc93d2b363a78a6cd7632da
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit 5ede3d8ccebde6f26c6b24f6458e57d99d5f3957.
No longer needed due to FSP being updated, with the 139_40 release,
to accept StackBase field
BUG=chrome-os-partner:52784
BRANCH=none
TEST=built and booted with FSP 139_40
Change-Id: Ic832d8dc4ca87631f5fef80d4d41558d9a72630a
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15068
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP 2.0 spec has updated the signatures for the FSPM and FSPS blobs
with the 139_40 release. In order to successfully pass through
memory/silicon init the header files must be updated to the latest
versions
BUG=chrome-os-partner:52784
BRANCH=none
TEST=built and booted
Change-Id: Ib60d0d9afa4ee29dff26177826ba59db81b630e8
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15066
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Update autogenerated FSP 2.0 generic header files
based on FSP release 136_30.
Changes were made to avoid duplicating some of the
structs for every SoC.
BUG=chrome-os-partner:50765
TEST=Build coreboot
Change-Id: I6f3c9270fb67210d6ea87e17ccf52d203fa64b4b
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://chromium.devtools.intel.com/7145
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://chromium.devtools.intel.com/7584
Reviewed-on: https://review.coreboot.org/15081
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Starting from 136_30,FSP supports to update all the SDIO DLL
programming value through silicon init upd. Implement the interface
to pass board specific programming value to fsp silicon init.
Change-Id: Ifd901148f3f7f89f966217491c661ec346337c38
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://chromium.devtools.intel.com/7372
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://chromium.devtools.intel.com/7585
Reviewed-on: https://review.coreboot.org/15084
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Support the common Intel LPSS I2C driver for the 6 I2C bus controllers
that are present on the Skylake-LP PCH with a 120 mHz clock. The
required lpss_i2c_base_address() method is implemented separately for
verstage/romstage and ramstage environments.
This provides methods to convert to and from "struct device" and the
I2C controller bus number for that device. These are used to provide
support for the "I2C Bus Operations" that are present in the coreboot
devicetree.
To support the I2C controller before ramstage an early init function
is provided to do minimal initializaiton of the PCI device and assign
a temporary base address for use before memory. The final base
address is assigned during device enumeration and used during ramstage.
Because it is usually not necessary to enable I2C controllers before
ramstage a config register for the devicetree is provided to perform
early initialization of this controller. In addition the bus speed
can be set in the devicetree and that speed will be applied when the
device is initialized. If not provided the default speed is set to
I2C_SPEED_FAST.
This was tested with the google/chell mainboard by reading and writing
from the trackpad and codec devices during both verstage and ramstage.
Change-Id: Ia0270adfaf2843a3be4e00c732c85401a3401ef5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15105
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Move the existing I2C voltage configuration variable into a new
structure that is equivalent, similar to how USB ports are configured.
This is to make room for additional I2C configuration options like
bus speed and whether to enable the bus in early boot which are coming
in a subsequent commit.
The affected mainboards are updated in this commit so it will build.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e
Reviewed-on: https://review.coreboot.org/15104
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses
that are at 1.8V. This is currently done by passing in a value to FSP
but it is needed earlier than FSP if the I2C bus is used in verstage.
This does not remove the need for the FSP input parameter, that is
still required so FSP doesn't disable what has been set in coreboot.
The mainboards that are affected are updated in this commit.
This was tested by exercising I2C transactions to the 1.8V codec while
in verstage on the google/chell mainboard.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c
Reviewed-on: https://review.coreboot.org/15103
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a function similar to broadwell to set the PRR for a region of
flash and protect it from writes. This is used to secure the MRC
cache region if the SPI is write protected.
BUG=chrome-os-partner:54003
BRANCH=glados
TEST=boot on chell, verify PRR register is set and that the
MRC cache region cannot be written if the SPI is write protected.
Change-Id: I925ec9ce186f7adac327bca9c96255325b7f54ec
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Id: abb6f645f5ceef3f52bb7afd2632212ea916ff8d
Original-Change-Id: I2f90556a217b35b7c93645e41a1fcfe8070c53da
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349274
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-on: https://review.coreboot.org/15102
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a generic LPSS I2C driver for Intel SOCs that use the Synopsys
DesignWare I2C block and have a similar configuration of that block.
This driver is ported from the Chromium depthcharge project where it
was ported from U-Boot originally, though it looks very different now.
From depthcharge it has been modified to fit into the coreboot I2C
driver model with platform_i2c_transfer() and use coreboot semantics
throughout including the stopwatch API for timeouts.
In order for this shared driver to work the SOC must:
1) Define CONFIG_SOC_INTEL_COMMON_LPSS_I2C_CLOCK_MHZ to set the clock
speed that the I2C controller core is running at.
2) Define the lpss_i2c_base_address() function to return the base
address for the specified bus. This could be either done by looking
up the PCI device or a static table if the controllers are not PCI
devices and just have a static base address.
The driver is usable in verstage/romstage/ramstage, though it does
require early initialization of the controller to set a temporary base
address if it is used outside of ramstage.
This has been tested on Broadwell and Skylake SOCs in both pre-RAM and
ramstage environments by reading and writing both single bytes across
multiple segments as well as large blocks of data at once and with
different configured bus speeds.
While it does need specific configuration for each SOC this driver
should be able to work on all Intel SOCs currently in src/soc/intel.
Change-Id: Ibe492e53c45edb1d1745ec75e1ff66004081717e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15101
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Pass the serial port address to FSP using a UPD value in the MemoryInit
API.
TEST=Build and run on Galileo Gen2
Change-Id: I86449d80310b7b34ac503ebd2671a4052b080730
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15079
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Please refer Apollolake BIOS Writers Guide
Change-Id: I5f82cdc4b34a53b5184ef1e918cae15a1df6cc5e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I87505bb31cd1b46d27cc5c9ba8d086df7393653e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15050
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add missing constants for DRAM density. This resolves boot issue,
because misconfigured density results in incorrect memory mapping.
Change-Id: I3bad911bf406bfc5677059490d0e89fcbf735b70
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15059
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Correct the spelling of *firmware* in a comment.
Change-Id: I44bcd95f754ff839d582dc2150e1883a6315da9e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/15078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
fsp_notify(END_OF_FIRMWARE) should be sent to FSP to enable putting CSE
in low power state
Change-Id: I76b8e85ccf077032616ba8e4a333d9264dc65ed2
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15054
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Because the resource for the ACPI BAR is fixed, pci_dev_set_resources
does not store it to the device. This means we need to do part of the
dance to get the ACPI IO region to work after coreboot.
Of course, this BAR can be destroyed later by the OS probing it, but
at least we try to get it working out of coreboot.
Change-Id: Ibff18d30936f94d4f149a89313254531365f43e6
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/15048
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
i2c_init() leaves the I2C device enabled. Combined with the default
interrupt mask (0x8ff) and the fact that the interrupt line is shared,
this leads to an interrupt storm in the OS until a proper I2C driver
is loaded.
This change clears the interrupt mask to prevent the interrupt storm.
Change-Id: I0424a00753d06e26639750f065a7a08a710bfaba
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/15047
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
TSEG register comes out of reset with a non-zero default value. This
causes issues when cbmem_top returns non-zero value based on TSEG read
before DRAM is initialized. Thus, clear TSEG reg early in bootblock to
avoid unwanted side-effects.
Change-Id: Id3c6c270774108e4caf56e2a07c5072edc65bb58
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15049
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Verstage on apollolake requires the functions defined in car.c to
perform flush of l1d to l2 on loading romstage into CAR.
Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15046
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic314656f34fda10e58e55bdefeb0a1f0c6ab5ae2
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14966
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
ChromeEC is needed for EC controlled features to work properly.
This patch adds neccessary support in soc/intel so that mainboard
asl files can include the ChromeEC e.g. PNOT method and
LPCB and also the nvs fields.
BUG = 53096
TEST = This patch is needed by the mainboard specific ASL change to include
src/ec/google/chromeec/acpi/ec.asl
Change-Id: Icecc437df05cd3efb41579317a353fd22526e0c9
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/14967
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On apollolake, the boot media layout is different in that the traditional
"BIOS" region contains another data structure with the boot assets such
as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name
a few. This region is referred to as the IFWI. Add support for writing
the IFWI to a specified FMAP region to accommodate such platforms.
Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14999
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The use of HSUART0 on galileo requires early initialization of the I2C
GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1
on the expansion connector.
TEST=None
Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15010
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Move UART initialization into romstage.c and eliminate uart.c.
TEST=Build and run on Galileo Gen2
Change-Id: I5f2c9b4c566008000c2201c422a0bba63da64487
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15009
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Split out the I2C code to allow I2C transactions during early romstage.
TEST=Build and run on Galileo Gen2
Change-Id: I87ceb0a8cf660e4337738b3bcde9d4fdeae0159d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15007
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set a temporary I2C base address during romstage.
TEST=Build and run on Galileo Gen2
Change-Id: I4b427c66a4e7e6d30cc611d4d3c40bb0ea36066d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15006
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Only define BIT names if they are not already defined.
TEST=Build and run on Galileo Gen2
Change-Id: Ief4c4bb7a42a1bb2a7f46f13dc9b8bbb4d233e3c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15002
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove extra ": " following reigster type.
TEST=Build and run on Galileo Gen2
Change-Id: I57dd40a540d7b5371a6c45174f47a311b83a2aab
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14948
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Migrate the clearing of the SMI interrupts and wake events from FSP into
coreboot.
TEST=Build and run on Galileo Gen2
Change-Id: Ia369801da87a16bc00fb2c05475831ebe8a315f8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14945
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Rename the file pmc.c to lpc.c to prepare for further additions.
TEST=Build and run on Galileo Gen2
Change-Id: If98825d72878f0601f77bff8c766276dbda8a9ae
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14946
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Migrate PCIe reset from PlatformPciHelperLib in QuarkFspPkg into
coreboot.
Change-Id: I1c33fa16b0323091e8f9bd503bbfdb8a253a76d4
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14944
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MMIO region of 256 KiB under 4 GiB is not decoded by SPI controller
by hardware design. Current code incorrectly specifies size of that
region to be 128 KiB. This change corrects the value to 256 KiB.
Change-Id: Idcc67eb3565b800d835e75c0b765dd49d1656938
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14979
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a PCI driver for the skylake SD card device and have it generate
an entry in the SSDT for the card detect GPIO if it is provided by the
mainboard in devicetree.
This sets up a card detect GPIO configuration that will trigger an
interrupt on both edges with a 100ms debounce timeout and can wake the
SD controller from D3 state.
The GpioInt() entry is bound to the "cd-gpio" device property which will
be consumed by the kernel driver.
The resulting ACPI output in the SSDT will be combined with the SDXC
device declaration in the DSDT.
Example:
Scope (\_SB.PCI0.SDXC)
{
Name (_CRS, ResourceTemplate () {
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 10000,
"\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 35 }
})
Name (_DSD, Package () {
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "cd-gpio", Package () { \_SB.PCI0.SDXC, 0, 0, 1 } }
}
})
}
Change-Id: Ie4c1bfadd962cf55a987edb9ef86e92174205770
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14995
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Minor cleanups in pci_devs.h for indentation and newlines to be
consistent throughout the file.
Change-Id: I522df141a6b33d918cfb3de1b9019c0c4a73e3e5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14994
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the Audio DSP device for skylake as a PCI driver with a static
scan_bus handler so generic devices can be declared under it.
This is for devices like the Maxim 98357A which is connected on the
I2S bus for data but has no control channel bus and instead just has
a GPIO for channel selection and power down control and needs to
describe that GPIO connection to the OS via ACPI.
Change-Id: Iae02132ff9c510562483108ab280323f78873afd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14993
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the I2C devices to skylake with the scan_bus handler for SMBUS
devices so that I2C-based devices can be declared in devicetree.cb
and get initialized properly during ramstage.
This does not yet provide the I2C driver, but it allows for devices
that are declared in devicetree.cb to provide ACPI tables to the OS.
Change-Id: I9dfe4a06a8b0bc549a2b0e2d7c033c895188ba30
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14992
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the GPE header file to skylake chip.h so the SOC-defined macros
for the various GPE values can be used in devicetree directly.
For example:
chip drivers/i2c/touchpad
register "wake" = "GPE0_DW0_05"
device i2c 15.0 on end
end
Change-Id: Ic322108561b34aa34a24a4daba6ba7a4f7a3f9a4
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14991
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Depending on which options are selected there needs to be certain
functions supplied. However, the spi, mmap_boot, and tsc_freq modules
were not included in the SMM builds. Fix the omission.
Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14977
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There previously was no support for building verstage on apollolake.
Add that suport by linking in the appropriate modules as well as
providing vboot_platform_is_resuming(). The link address for verstage
is the same as FSP-M because they would never be in CAR along side
each other. Additionally, program the ACPI I/O BAR and enable decoding
so sleep state can be determined for early firmware verification.
Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14972
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Iba506054a3d631c8e538d44e1ca6877dd02c2ca9
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14956
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=none
TEST=Boot to OS and verfiy if rtc0 device is created
under /sys/class/rtc/
Change-Id: Idec569255859816fda467bb42a215c00f7c0e16e
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The NB_DEV_ROOT macro, is almost unreadable, as it depends on other
stringified macros, and acts differently depending on the coreboot
stage. For ramstage, it also hides a function call.
Rewrite the macro in terms of more basic and readable macros.
Change-Id: I9b7071d67c8d58926e9b01fadaa239db1120448c
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14890
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
memmap.c functionality is designed to be used in more than ramstage.
Therefore, it cannot use ramstage-specific APIs. In this case, the
SIMPLE_DEVICE API offers a more consistent behavior across stages.
Change-Id: Ic381fe1eb773fb0a5fb5887eb67d2228d2f0817d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
