| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I0387ccf6970e6169cbebd232ae210731338d0900
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/20755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As per discussion with CSME team, ME is NOT using PCI Config
Space register HFSTS2 Bit 10 to update ME power-gated status.
ME goes to CM0-PG state after ME device becomes idle after
Bit 2 of MMIO register offset 0x800 (D0i3 Control - HECI1_D0I3C)
is being set.
And to retrieve the PG status of ME, one should read from the
PWRMBASE+offset 0x590 (which should give the value 0xF9) and
PWRMBASE+offset 0x594 (which should give the value 0xFF).
But, also it needs some time for the ME FW to go to idle state
and reflect these values in PWRMBASE registers after D0i3 bit
is being set. This does not happen instantly.
So, in coreboot, if we read the ME PG state in finalize.c, which
happens just after FSP Notify phase, where actually ME D0i3 bit
is set, we do not read the correct PG state values (i.e, 0xF9
and 0xFF).
But, once it boots to Kernel, if we read those same registers
through iotool mmio_read32 command, we get correct values.
So, removing the ME PG state prints from coreboot, since it is
actually showing wrong information, although ME Power Gating is
successful.
Change-Id: Idd31a9803b4c9db7d4bb8bbec5374583a8df0c41
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The following changes have been applied for GPIO:
1. Correct port id using by GPIO community 3 for CNL-LP.
2. Correct number of doubleword for each pad from 2 to 4.
Change-Id: I717d1ffba8e6722543f4cf8083fe6145fa85e184
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Apollo Lake SoC supports configuration of Running Average Power Limits
(RAPL) for package domain. This feature is not required for all APL
mainboards. According to the APL SoC EDS Vol 4 chapter 18.4 Power
Limiting Control it is not necessary to enable the RAPL algorithm per
default. For that reason make the RAPL configuration selectable.
Change-Id: Ib737b162f72b76c15e5768859f9099e2e7ef6426
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
init_igd_opregion itself is supposed to return cb_err so this adds
error handling, just like other implentations of write_acpi_tables do it.
this had been found by coverity:
*** CID 1378270: Error handling issues (CHECKED_RETURN)
/src/soc/intel/skylake/igd.c: 147 in write_acpi_igd_opregion()
141 /* If IGD is disabled, exit here */
142 if (pci_read_config16(device, PCI_VENDOR_ID) == 0xFFFF)
143 return current;
144
145 printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n");
146 opregion = (igd_opregion_t *)current;
CID 1378270: Error handling issues (CHECKED_RETURN)
Calling "init_igd_opregion" without checking return value
(as is done elsewhere 5 out of 6 times).
147 init_igd_opregion(opregion);
148 update_igd_opregion(opregion);
149 current += sizeof(igd_opregion_t);
150 current = acpi_align_current(current);
TEST=Built
Change-Id: If6f5d53037f093607d89cfe8faf193d55de7f6c4
Found-by: Coverity (CID 1378270: Error handling issues (CHECKED_RETURN))
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/20766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The values were verified to be correct with the KabylakeFsp0001 from
github. Skylake FSP documentation disagrees so YMMV.
Change-Id: I1ee04dbbed48d5376dbc24ae70753b059f2646eb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20765
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SMBIOS memory HOB produced by glk FSP v52_27 has new structure
members, which are not available in current apl FSP. New FSP-m
header file in https://review.coreboot.org/#/c/20673/ lists new
SMBIOS structure members.
Break memory HOB save routine into different functions for glk
and apl to accomodate new changes.
Change-Id: I33c6e4f2842cebbb326b6a05436fa69e3836ffc6
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/20674
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current implementation of itss_irq_init() uses 8 bit write access to
IRQ routing registers which is not supported on Apollo Lake.
This commit moves the register access from 8 bit to 32 bit so that this
function can be used with every platform.
Change-Id: I15c3c33a16329fd57f0ad7f99d720adbf300d094
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/20680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2cd210dd0443b854294ce7ee8e267594e3ea1780
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20651
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
As per GCC 7.1 compiler struct reset_reply is considered
as uninitialized inside send_heci_reset_message function.
Change-Id: Ide53a9267dfba1a00263ada1d7016a48ecb9aad8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
coreboot was setting SPI FPR register to protect the
mrc_cache data range stored in flash. This programming was being done
after FSP Notify 1.
But, FSP was locking the SPI by setting FLOCKDN Bit during Notify
phase 1, due to which coreboot was unable to protect that range.
As solution, FSP introduced a new UPD SpiFlashCfgLockDown to skip
the lockdown of flash on interest of bootloader. Set that UPD to 0
to skip the lockdown of FAST_SPI flash from FSP.
The same is being done from coreboot after end of Post at finalize.c
file.
BUG=b:63049493
BRANCH=none
TEST=FPR can be set properly to protect the mrc_cache range. The
issue reported in the bug doesn't come when both software and
hardware WP is enabled with this patch.
Change-Id: I3ffca2f1b05ab2e4ef631275ef7c3a6e23e393aa
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use 16bit write to avoid touching the upper two bytes that may cause
write cycle to fail in case a prior transaction has not completed.
This function sets the WRSDIS(Bit 11) and FLOCKDN (Bit 15) of the
SPIBAR + BIOS_HSFSTS_CTL. While WRSDIS is lockable with FLOCKDN,
writing both in the same cycle is guaranteed to work by design.
Avoid read->modify->write operation not to clear the RW1C bits
unintentionally.
Change-Id: Ia7880aaca0ed64150c994d49786a0a008bbaa98b
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Earlier 15ms time-out was kept for SPI transactions which was not
enough for SPI Erase transactions.
Increase the max time-out time to 5 secs which was present in SKL
before common code.
This increase in time-out won't disturb other SPI transactions like
Read, Write or Read Status, since, for those it will come out of
the loop once FDONE bit or FCERR bit is set.
BUG=b:63959637
BRANCH=none
TEST=Built and booted poppy and all SPI transactions succeeded.
Change-Id: I1c015d80b33677de11755fb2097373631d1fa8c4
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable SOC_INTEL_COMMON_GFX_OPREGION for all FSP versions.
Allows to get rid of opregion.c, as it's no longer needed.
Change-Id: I39190488e12917a09dbf7ee3947a33940ebc290b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I8febb8d74e2463622cab0313c543ceebec71fdf4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Iaab26033e947cb9cf299faf1ce6d40a90a9facbe
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20704
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The variable p was going out of scope while still being pointed to by
*cpu_name.
Fix coverity ID 1378215 (Pointer to local outside scope)
Change-Id: I6ad7b1919104b4d97869efe5065e39c2a43de638
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
This reverts commit 399c022a8c6cba7ad6d75fdf377a690395877611.
This was merged too early. I'll repost it.
Change-Id: Iabac0aaa0a16404c885875137cf34bf64bf956f7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20686
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit dbe7f893c0e3fffc4e9862d872d65df752feaf9d.
This was merged too early. I'll repost it.
Change-Id: Ife56f45e91c0b961d0fad0e1872c6df3f9e18973
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20685
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id2c94afed8976687524a0913ea1c13aeddd98333
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/20654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The following changes can make system call into FSP siliconinit and exit
from that until payloads.
1. Add frame to call fspsinit.
2. Temporarily set all the USB OC pin to 0 to pass FSP siliconinit.
Change-Id: I1c9c35ececf3c28d7a024f10a5d326700cc8ac49
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Initialize postcar frame once finish FSP memoryinit
Change-Id: I888d471fa620b7fc9f8975524a31f662e1fc5079
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch is to provide an additional read LPC pci offset register
BIOS_CONTROL (BC) - offset 0xDC to ensure that the last write is
successful.
Change-Id: I308c0622d348fc96c410a04ab4081bb6af98e874
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch is to provide an additional read SPI pci offset register
BIOS_CONTROL (BC) - offset 0xDC to ensure that the last write is
successful.
Change-Id: I3b36c1a51ac059227631a04eb62b9a6807ed37b1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
LPC pci config register BIOS Control (BC) - offset 0xDC bit 1
is for Lock Down.
Change-Id: I838dd946b8cdb7114f58ccc5d02159f241f0bad0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Relocate ramstage into CBMEM.
Change-Id: I0543d25d722c5872f4f139a98e5125a41cc40653
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The gpio numbers are global, but they have their respective place
within each community and the group within their community. For
all the calculations open coding this calculation convert them to
use the helpers.
Change-Id: I0423490ae1740ef59225a70fea80a7d91ac2a39a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
A pad number is passed into gpi_status_get() to determine if its
associated bit is set from a generated event. However, the
implementation wasn't taking into account the gpi_status_offset
which dictates the starting offset for each community. Additionally,
the max_pads_per_group field is per community as well -- not global.
Fix the code to properly take into account the community's
gpi_status_offset as well as the max_pads_per_group.
Change-Id: Ia18ac6cbac31e3da3ae0ce3764ac33aa9286ac63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20652
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
|
|
`CONFIG_PRE_GRAPHICS_DELAY` was only applied on a dead code path in
`igd.c` that is guarded by always selected `CONFIG_ADD_VBT_DATA_FILE`.
Nobody missed it for nearly a year, plus, it's not applied on the GOP
path, let's drop it.
Change-Id: I0b70cce3a3f2b50cb4e72c4d927b35510ff362a2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This quirk was superseded a view lines above. Also the whole path is
guarded by `CONFIG_ADD_VBT_DATA_FILE` which is always selected for
nearly a year now.
Change-Id: I7fc5184d6e81e4588616e0302dee410e74bdab5a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
It looks like this code was written with completely different semantics
in mind. Controllers, channels and DIMMs are all presented in their phy-
sical order (i.e. gaps are not closed). So we have to look at the whole
structure and not only the first n respective entries.
Change-Id: I8a9039f73f1befdd09c1fc8e17cd3f6e08e0cd47
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20650
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6fcee760eb32b797430eb363ce0202557b74a126
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20649
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When configuring i2c frequency to I2C_SPEED_FAST_PLUS, observed frequency
was I2C_SPEED_FAST.
This was due to incorrect register programming.
TEST= Build for Soraka, I2C frequency during firmware execution was
I2C_SPEED_FAST_PLUS when configured for I2C_SPEED_FAST_PLUS.
Change-Id: Ib0e08afe0e1b6d8c9961d5e3039b07ada9d30aa3
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/20646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The _PIC method is called by the OS to choose between interrupt routing
via the i8259 interrupt controller or the APIC.
Change-Id: I2bc16f9c096c095c02de3692e76c0906cec54cb5
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/20617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The following minimal changes are needed to make system boot until FSP
memoryinit got called.
1. Program SA BARs
2. Assume previous power state is S0.
Change-Id: Iab96b27d4220acf4089b901bca28018eaba940a1
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Microcode needs to be loaded prior to FSP initialization.
Change-Id: Idd70bd3e6555866d9bb232e8904aed4120c79fe7
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20484
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We've just decided to remove the only known use of the VBSD_SW_WP flag
in vboot (https://chromium-review.googlesource.com/c/575389), since it
was unused and never reliable on all platforms anyway. Therefore, we can
now also remove the coreboot infrastructure that supported it. It
doesn't really hurt anyone, but removing it saves a small bit of effort
for future platforms.
Change-Id: I6706eba2761a73482e03f3bf46343cf1d84f154b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/20628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable SMBus controller based on config in mainboard devicetree.cb
BUG=None
TEST= Build for Soraka, Verify that SMBus is enabled or disabled (run
lspci in OS) based on board devicetree.cb config 'SmbusEnable'.
Change-Id: I04c8bc30c03fd8dc7cc8ae239885e740b09e9bc1
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/20546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
write[8|16|32] wants volatile pointers, not const pointers.
Change-Id: I92010516e8e01c870b60107e20a576a75d491e4e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13566
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1.Replace outdated defination of TCO_EN to TCO_BASE_EN
2.Remove setmaxfreq() as not needed any more.
Change-Id: Id54fdfd14f1abaa592132195e6f9acfa5807626e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/20568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I0bbdd641244f0c7baaa2146dcfde6431bde387c5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
HECI2 and HECI3 devices are “function disable” during FSP
Silicon Init phase. Device will not be visible over PCI bus
hence removing these devices from wake source list.
Change-Id: I0de665e039d74e49e5a22db9714bc9fee734e681
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add register definitions used in PMC block.
Change-Id: I963f402a59d49dfc7b76224f719a315e1cc6dc74
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20071
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Explicitly add LOGICAL to the reset macro name to make it explicit
that the values are logical.
2. Reword some of the comments and combine them into single comment
instead of scattering the comments throughout.
3. Use c99 struct initializers for the reset mapping array.
4. For the chipset specific values use literals that match the hardware.
5. Use 'U' suffixes on the literals so we don't trip up compiler being
over zealous on undefined behavior.
6. Use unsigned and fixed-width types for the reset mapping structure
since the code is reliant on matching up with a register definition.
7. Fix formatting that can fit < 80 cols.
Change-Id: Iaa23a319832c05b8a023f6e45c4ee5ac06dd7066
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Sadly, small core and big core are not aligned with the OS driver's
expectation on the number of ACPI devices used for each community.
Big core uses a single device while small cores use one ACPI device
per community. Allow for this distinction within the common gpio
implementation and ensure apollolake is utilizing the new option
to retain the correct behavior.
Change-Id: I7c7535c36221139ad6c9adde2df10b80eb5c596a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20588
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
It should never be globally exposed. Remove the global symbol
and make it static.
Change-Id: I3b85f3bbf6a73d480cdefdcdec26e137e3a3f75f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
It should never be globally exposed. Remove it.
Change-Id: I90e201ddd4df2cda89e7d3e4cb81bdc2a81cac83
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:7473486, b:35775024
BRANCH=None
TEST=On bootup make sure PL2 and PsysPL2 values set
properly (through debug output)
Change-Id: I847a8458382e7db1689b426f32ff2dcbc5a0899c
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/20418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I3c5f9e0d3d1efdd83442ce724043729c8648ea64
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add reset functionality. This implementation relies on CSE to trigger
global reset.
Change-Id: I7e6ae07a48f1cdc3d2f4cdb74246627d27253adf
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This enables building working bootblock and non-functional romstage
and ramstage.
Change-Id: I580cd2c3279d742f202b2adfbe55c814cfb48f99
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add essential initialization needed for PCH in bootblock.
Change-Id: I3694e099e78c2989f7192c550cbba098e5df2032
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add basic CPU initialization for bootblock, as well as relevant headers.
Change-Id: I318b7ea0f3aa5b5d28bf70784ccd20f2fe28cd86
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The FSP 2.0 path uses postcar to decompress ramstage. Since postcar
is entirely RAM based there's no need to have an excessively large
stack for the lzma decompression buffer. Therefore, reduce the stack
required to 1 KiB like apollolake.
Change-Id: I45e5c283f8ae87e701c94d6a123463dddde3f221
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I287404f1615c6c0b441dd1b98a40e79919920a02
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Dump basic platform information early in bootblock.
Change-Id: I12d1c9dd9f0518c133de465a4db72a0664a94eef
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20068
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 5535cead (intel/skylake: Disable SaGv in
recovery mode).
Commit 5535cead disables SaGv in recovery mode to save few seconds
booting time as we were doing memory training on every recovery flow.
Now we don't need to perform MRC training on every recovery boot
due to RECOVERY_MRC_CACHE implementation in place. Hence we don't
need to define different SaGv policy between Normal (developer) mode
and recovery mode to save few seconds.
Using different SaGv parameters between recovery and all other mode
has some significent drawbacks over warm reboot cycle. We are seeing
a MRC traning hang in eve/soraka/poppy devices with below use case.
Step 1: Boot system in developer mode (first time RW_MRC training)
Step 2: Set recovery_request=1 (using crossystem) and issue “reboot”
from OS
Step 3: System will perform recovery mode MRC training and boot to
OS (first time RECOVERY_MRC training)
Step 4: Issue “reboot” from OS console.
Step 5: System wil boot in developer mode (using RW_MRC cache)
Step 6: Set recovery_request=1 (using crossystem) and issue “reboot”
from OS
Step 7: System will pick RECOVERY_MRC_CACHE and will hang during
MRC training.
This patch fixes issue mentioned above and ensures system boot to
OS without any hang if we change mode (dev<->recovery) over warm
reset.
BUG=b:63515071
BRANCH=none
TEST=manual stress testing of dev<->recovery mode over warm boot.
No MRC hang with this fix on eve/soraka/poppy devices.
Change-Id: I8d094a8b6d78ea3bf8f929870a4a179495c29c78
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Don't need this additional 2ms delay as PCR read after sideband write
help to fix original hard hang issue.
This reverts commit d4b6ac19b0a6619ebe645875282643cc50cf7a3e.
Change-Id: I4232cba5b92e17f728795f7c282af6161e385e9b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BIOS must ensure to read same PCR offset after PCR write operation
is done.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<->D3 transition on eve failing
unit. No hard hang with this fix.
Change-Id: Id3d567aab517b16ff99a526fc29c2d71bf4042d0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The PMC of PCH-H requires a different destination id.
TEST=Run on kontron/bsl6 and observed that PM registers are correctly
dumped at start of romstage.
Change-Id: I862e4df986f1cdea34f8fa45d016fb6b51f29122
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Move the generic I/O decode range setup before the console init.
TEST=Run on kontron/bsl6 which requires 0xa80/0xa81 decoded to
initialize serial ports. Serial console works from boot-
block on.
Change-Id: I9829f188c80eb73f6cd91b0c22e1c07da5745ad6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
CONFIG_SOC_INTEL_COMMON_BLOCK_SGX controls building. The SGX feature
is still enabled from devicetree.cb. As of now this SGX init supports
only KBL (SKL not tested). Support of SGX for new SOCs would be added
incrementally in this common code base.
Change-Id: I0fbba364b7342e686a2287ea1a910ef9a4eed595
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/20173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add I2C debugging support:
* Add I2C_DEBUG Kconfig value to enable debugging
* Display I2C segments before the transfer
* Display errors that occur during the transfer
* Display the number of bytes transferred for successful transfers
TEST=Build and run on Galileo Gen2
Change-Id: Ia17be8b4213b13fd6c6a367d081414d0f21fbb0f
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
No regression observed on a APL platform
Change-Id: I0fcc22df5eaec014f3b89755415f051b05aa554a
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order for this (seemingly unnecessary) status assignment to stay, let's
explain it in a comment.
Change-Id: I0a364539c37005cfd637b75c8cc23b84e274294d
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/20411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia951a466479b1e98e49895705162a66aece7609b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ida822d704b04cc4d1dfffb58003fc308bcb502d0
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This patch basically does two things -
1) Remove unnecessary setting of flex_ratio to TDP nominal:
Factory configured (default) Max Non-TURBO ratio(P1) is already cofigured
in MSR_PLATFORM_INFO(0xCE).
If this Maximum Non-TURBO Ratio(P1) needs to be modified, it should be done
using MSR_FLEX_RATIO (0x194).
Here, in this code, the FLEX_RATIO is being modified by the TDP Nominal
Ratio, reading the MSR_CONFIG_TDP_NOMINAL(0x648). But this value is
actually less than the factory configured Maximum Non TURBO Ratio (P1).
So, this code is actually not required.
Also, the Bit 12 in PCH Soft Strap Register is already set in descriptor.
This Bit implies Processor Boot Max Frequency -
0 = Disable Boot Max Frequency
1 = Enable Boot Max Frequency (Default)
This setting determines if the processor will operate at maximum frequency
at power-on and boot.
Thus this patch will avoid one extra platform warm reset now onwards.
2) Remove wrongly setting Max Frequency in Bootblock phase:
In the function set_max_frequency(), the P-State max ratio was set to
TDP Nominal ratio if C-TDP was enabled, else it was set to Max Non
Trbo ratio.
But, when the cpu gets reset, it will operate with the Max-Non Turbo
ratio only, which is greater than the TDP Nominal ratio.
So, no need to set back the ratio to TDP Nominal which is lower than
the currently operating frequency.
BUG=none
BRANCH=none
TEST=Build and boot poppy
Change-Id: I24bfc86ddf0f038d85da938e41e950382fe2a6c3
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is no choice, if not leaving it with the default the build
will fail.
Change-Id: Id91e3ce87f8ced3001fcd2125f8f6781b270f5bc
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cannonlake has built-in UART driver as part of LPSS block. However port
mapped decoders are in use as well.
Change-Id: I9f209bf29c1748c5beea31bc6b31cb07a1e14195
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When the C compiler expects 16-byte alignment of the stack it is
at the call instruction. Correct existing call points from assembly
to ensure the stacks are aligned to 16 bytes at the call instruction.
Change-Id: Icadd7a1f9284e92aecd99c30cb2acb307823682c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic48401e92103ff0ec278fb69a3d304148a2d79aa
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Cannon Lake SoC boilerplate directory with:
* SoC directory
* Base Kconfig
* Dummy cbmem.c
Change-Id: Ie28d8b56a1d1afcf1214ef734a08be6efcc8a931
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Return CB_SUCCESS and CB_ERR instead of some integer.
Preparation to merge intel/soc and intel/nb opregion implementations.
Change-Id: Ib99fcfe347b98736979fc82ab3de48bfc6fc7dcd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
... even though the author of the code probably wished he was
working on a (much faster) broadwell system instead. Let's fix
the header guard to reflect the right SOC.
Noteworthy: clang detected that this was wrong.
Change-Id: I74c217c0471800f40c31a9ac38ba5396f82cd724
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In the D0 and D3 ACPI methods use word access to the PME status and
control register. This brings the code inline with the Intel reference
code and matches how the kernel handles access to this register.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across multiple devices
Change-Id: I53f7465d6ad5da1780a5641ff52056445ebaca8b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For the skylake/kabylake generation of PCH there is an ACPI workaround
for emmc/sd power state that involves disabling and re-enabling dynamic
clock gating after enabling power to the controller, before setting the
power state to D0.
Under certain conditions we have observed that the controller is not
powered and ready by the time the kernel attempts to read the PME
control and status register and so the system will hang while attempting
to read PCI config register 0x84.
To ensure that the controller is ready add a 2ms delay after re-enabling
dynamic clock gating and before setting the power state to D0.
This issue has been observed on eMMC, but the same workaround exists for
the SD card interface so the same delay is added there.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across many devices
shows no hard hang after 2 days.
Change-Id: If0f0323cf5437c54c907c332937b5de9dda2d8f6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Code checked manually
Change-Id: I91ababb3bf7aa1ab0f71bb005c4685e81bb4d92f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/20252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As per latest BWG, ucode reloading should be done at the end
of Mp Init, i.e., after PRMRR and other features are enabled.
No reloading specifically after SMM Relocation is required.
As, in the Common CPU MP Init code, we are already doing a
uCode load at the end of MP Init Feature Programming, hence,
the uCode loading after SMM relocation can be removed.
Change-Id: Ib1957c5fe5a8c83bb20b978a9841670b0c3e8846
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch uses the common CPU Mp Init code.
BUG=none
BRANCH=none
TEST=Build and boot poppy
Change-Id: Ieb2f8ae25a31e86e9251fe97859678745fe610f5
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This patch contains State Machine callbacks init_cpus()
and post_cpu_init().
Also, it has the SOC call for CPU feature programming.
Change-Id: I5b20d413c85bf7ec6ed89b4cdf1770c33507236b
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SMI code is very similar across Intel platforms. Move this code to
common/block/smi to allow it to be shared between platforms instead
of duplicating the code for each platform. smihandler.h has already
been made common so all it will contain is name changes and a move
to the common block location. Due to moving smihandler code, APL
changes are bundled here to show this change.
Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/19392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add SPI driver code for the legacy SPI flash controller. Enable erase
and write support allowing coreboot to save non-volatile data into
the SPI flash.
TEST=Build and run on Galileo Gen2.
Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch uses common SCS library to setup
sd card.
Change-Id: I06898e30a9b39f169b35f581a3ee09238f0f40c4
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/20217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
This patch uses common SCS library to setup
sd card.
Change-Id: Iafbba04d7a498b9a321e8efee4abf07820d17330
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/19632
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Create Intel Common SCS code. This code currently only contains
the code for SD card SSDT generation. More code will get added up
in the subsequent phases.
Change-Id: I82f034ced64e1eaef41a7806133361d73b5009d3
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/19631
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: I88e376d61c4aba5030a0be7c8bdfe7b57881a197
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/20169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't allow the user to set PCIe configspace base address.
Don't allow the user to set the DCACHE size and base.
Change-Id: I7a42cc5f6098214364624bcfa3cbd93b4903ee84
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: Ic1656311ecc670dc0436995f0ec8199d270da4d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: I8b2794f56f39492589a08e5676cb33eec89a976e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20179
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: I254549057552be93611afa8ca52d22be220fe3dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Does not need to changeable in menuconfig.
Change-Id: Id488f7333952d10d10a62ac75298ec8008e6f9b4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
A major regression was introduced with commit 6520e01a
(soc/intel/apollolake: Perform CPU MP Init before FSP-S Init)
where the APs execution context is taken away by FSP-S. It
appears that FSP-S is not honoring the SkipMpInit UPD because
it's been shown with some debug code that FSP-S is compeltely
hijacking the APs:
Chrome EC: Set WAKE mask to 0x00000000
Chrome EC: Set WAKE mask to 0x00000000
CBFS: 'VBOOT' located CBFS at [440000:524140)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 2e700 size 1a00
Running FSPS in 4 secs.. 315875 4315875
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
Running FSPS.. 4315875 4315875
ITSS IRQ Polarities Before:
ITSS IRQ Polarities Before:
IPC0: 0xffffeef8
IPC1: 0xffffffff
IPC2: 0xffffffff
IPC3: 0x00ffffff
ITSS IRQ Polarities After:
IPC0: 0xffffeef8
IPC1: 0x4a07ffff
IPC2: 0x08000000
IPC3: 0x00a11000
This is essentially a revert of 6520e01a to fix the previous
behavior.
Change-Id: I2e136ea1757870fe69df532ba615b9bfc6dfc651
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ib7aa495ccfd405d6ffc968388c28dc540da2f525
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If I2C device is disabled:
1. BAR for the device will be 0
2. There is no need to generate ACPI tables for the device
TEST=Verified that if an i2c device is disabled statically in
devicetree or dynamically in mainboard, then coreboot does not die
looking for missing resources.
Change-Id: Id9a790e338a0e6f32c199f5f437203e1525df208
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
USB port status register can be used to decide if a particular port
was responsible for generating PME# resulting in device wake:
1. CSC bit is set and port is capable of waking on connect/disconnect
2. PLC bit is set and port is in resume state
BUG=b:37088992
TEST=Verified with wake on USB2.0 port 3, mosys shows:
19 | 2017-06-08 15:43:30 | Wake Source | PME - XHCI (USB 2.0 port) | 3
Change-Id: Ie4fa87393d8f096c4b3dca5f7a97f194cb065468
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are many good reasons why we may want to run some sort of generic
callback before we're executing a reset. Unfortunateley, that is really
hard right now: code that wants to reset simply calls the hard_reset()
function (or one of its ill-differentiated cousins) which is directly
implemented by a myriad of different mainboards, northbridges, SoCs,
etc. More recent x86 SoCs have tried to solve the problem in their own
little corner of soc/intel/common, but it's really something that would
benefit all of coreboot.
This patch expands the concept onto all boards: hard_reset() and friends
get implemented in a generic location where they can run hooks before
calling the platform-specific implementation that is now called
do_hard_reset(). The existing Intel reset_prepare() gets generalized as
soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now
easily be added later if necessary). We will also use this central point
to ensure all platforms flush their cache before reset, which is
generally useful for all cases where we're trying to persist information
in RAM across reboots (like the new persistent CBMEM console does).
Also remove cpu_reset() completely since it's not used anywhere and
doesn't seem very useful compared to the others.
Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19789
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For an unknown reason, the I2C ACPI devices were placed
under \SB intead of \SB.PCI0, as with all other non-Atom
based Intel platforms. While Linux is tolerant of this,
Windows is not. Correct by moving I2C ACPI devices where
they belong.
Also, adjust I2C devices at board level for google/rambi
as to not break compilation.
Change-Id: I4ef978214aa36078dc04ee1c73b3e2b4bb22f692
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20056
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
