| Age | Commit message (Collapse) | Author |
|---|
|
this code change provides a way to enable 2x refresh rate
in RW image
In baytrail, it enables 2x refresh rate by default
BUG=chrome-os-partner:35210
BRANCH=none
TEST=check the register is set properly on rambi
Change-Id: I2a935b570c564986898b6c2064fc7ad43506dcba
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c740d403708862514be9fa24f56b2764328979eb
Original-Change-Id: I84f33d75ea7ebfea180b304e8ff683884f0dbe8a
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241754
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9498
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add some configuration options that allow tuning the VR for C-state
settings that may be able to reduce noise.
- Add option to enable slow VR ramp rate for C-state exit
- Add variable to configure the minimum C6/C7 voltage
BUG=chrome-os-partner:34771
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I01445d62fbfcf200b787b924d8d72685819a4715
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ed8f355e60292c82791817ae31bff58ac2390a72
Original-Change-Id: I8af75b69c8b55d3e210170ee96f8e22c2fd76374
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241950
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9497
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To ensure that boot flags (legacy, usb, signed-only) are
properly restored from CMOS and used in the first boot after
a battery removal or RTC reset then the VbNv region needs to
be preserved around the cmos_init call.
When using vboot firmware selection and VbNv is stored in CMOS
then that region of CMOS will have been re-initialized by the
time we call cmos_init and reset CMOS if the chipset flag was
set indicating a problem.
BUG=chrome-os-partner:35240
BRANCH=broadwell
TEST=manual testing on samus:
1) boot in dev mode, enable dev_boot_legacy and ensure it works
2) on EC console pulse PCH_RTCRST_L low for a second
3) ensure first boot after RTC reset will still boot legacy mode
4) remove battery for a time
5) ensure first boot after battery is re-inserted will still
boot legacy mode
Change-Id: Ica256bbdcba6d4616957ff38e63914dd15f645c6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 881c7841c95dec392a66eef38a7112c1f385fdfa
Original-Change-Id: I4c33f183ba4b301d68ae31c41fc6663f3be857b0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241529
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9495
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This function will use the next available/free protected range
register to cover the specified region of flash and write
protect it until the next reset.
This will be used by the common MRC cache code to protect the
RW_MRC_CACHE region after it is updated.
In order to communicate to the common NVM code that this function
is defined also enable CONFIG_MRC_SETTINGS_PROTECT variable.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I710c6a69f725479411ed978cc615e1bb78fb42b8
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 25365433be0f190e10a96d9946b8ea90c883b78a
Original-Change-Id: I4a4cd27f9f4a94b9134dcba623f33b114299818f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241129
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9493
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order for some panels to meet spec when the system is put
into S5 by way of power button during firmware (i.e. not by
the OS) then it needs to turn off the backlight and give it
time to turn off before going into S5.
If the OS properly sequences the panel down then the backlight
enable bit will not be set in this step and nothing will happen.
BUG=chrome-os-partner:33994
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: Ic86f388218f889b1fe690cc1bfc5c3e233e95115
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e3c9c131a87bae380e1fd3f96c9ad780441add56
Original-Change-Id: I43c5aee8e32768fc9e82790c9f7ceda0ed17ed13
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240852
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9490
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When disabling PCIe ports skip steps if no card is detected.
This prevents the loop from timing out on each empty slot.
BUG=chrome-os-partner:31424
BRANCH=broadwell
TEST=build and boot on samus, check that this code is
no longer timing out when disabling PCIe ports
Change-Id: I84ee0e0e325784b3af06abe70420c07cf6e13ed2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4d759e2350dd00ceb7df196ac7008729dc1e4cef
Original-Change-Id: Idd88f0f1191a5465a0d8dcca07b5c3a5c5ca8855
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240851
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9489
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The workarounds in ACPI methods for D0/D3 transition that are
used on haswell/LPT do not all apply to broadwell/WPT.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus, test USB functionality and wake
and ensure the device still does into D3 state
Change-Id: Ic3a75f5bf50e826ade7d942b48cfebb75cf976e6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1b54d105957ee80ca34048c42fb8f241731281cf
Original-Change-Id: I877afd51fc6c9b7906e923b893fc31bdf2cd1090
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240850
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9488
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This changes the broadwell graphics init path to only do the delay
before initializing graphics when running chromeos if we are also
going to execute the option rom.
BUG=chrome-os-partner:33671
BRANCH=samus
TEST=build and boot on samus
Change-Id: Idb7d39b22f7f6dc3be6dfbd2fa3cc2e33d78a397
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f7ed93504a74760f16acb8fb3c6c57ac514b7260
Original-Change-Id: I350f85738efe3d17152de4f025adbfd52ae15b95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228882
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9474
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
HSIOPC/GPIO71 is used to control power to VCCHSIO, VCCUSB3PLL and
VCCSATA3PLL in S0. PCH will drive HSIOPC low when all the high
speed I/O controllers (xHCI, SATA, GbE and PCIe) are idle.
This patch added a few additional PCIe programming steps as required
in 535127 BIOS Writer Guide Rev 2.3.0 to enable this power saving mode.
BUG=none
BRANCH=none
TEST=tested on Paine watching GPIO71 toggling as expected
Change-Id: Ica6954c125ec3129e2659168f1f23dc861ce5708
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e38f9ef57c480ca5ee420020eb80a1adb3c381d3
Original-Change-Id: I88ef125c681c8631e8b887f7ccf017b90b8c0f10
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238580
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9482
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The registers that were used here are for CPT/PPT and not
for HSW/BDW chips.
Update this to update just the Gen3 TX Output Voltage Downscale
Amplitude Adjustment field in the SATA ECR T88.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I94b702dc4a3c98678ba048ff9cfa4a85cc5b1eed
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4c5816cc647b84266751e8a591eb85d7735fee12
Original-Change-Id: I98ec9678938a6675828721d5b57683077f555d21
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238800
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9484
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Added a few bits to set in finalize step from scrubbing BWG
and reference code.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=build and boot on samus
Change-Id: I7b0c4dd3f14c06175c973561760ad1bdafd46fbb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3802aef908849fe6ea2bb0034d884064154ae9da
Original-Change-Id: Ia62055b32be039eef84a0f60f0ba307eb5dce6a1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/239958
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9485
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The original code uses L1EXIT_MASK to shift the bit for
PCIe L1 exit latency, the code should use L1EXIT_SHIFT
for bit shifting.
BUG=chrome-os-partner:34037
BRANCH=None
TEST=build and boot on candy, verify B0:D28:F0 + 4Ch [17:15]
set to 010b. Correspond WIFI device performance got improvement.
Signed-off-by: Kevin L Lee <kevin.l.lee@intel.com>
Change-Id: I3ac5b6319b726aa16cdb9678face89022d979517
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 381827e3d92c9e786cd8ebe412586968662fb4be
Original-Change-Id: I8171f80720830cfa76f26778ae31c7590a723b92
Original-Reviewed-on: https://chromium-review.googlesource.com/234673
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9480
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Using REG_PCI_POLL32 to check if the LINK is active with 50ms timeout.
BRANCH=none
BUG=chromium:431169
TEST=Test on Enguarde, compile ok and boot OS
Change-Id: If98ab4e31d17ec4e62d68b93edcec6d9aee87367
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: cf692ae9aebb43ab46cb07d36b62b300b16be1dc
Original-Change-Id: I490e6ffa40979628edf52a7444808b6d25a6e83d
Original-Signed-off-by: Kevin Hsieh <kevin.hsieh@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/231777
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9478
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some actions are needed and some are not on the way resume from S3.
BRANCH=master
BUG=chrome-os-partner:33025,chrome-os-partner:33796
TEST=Built the image and confimed the boot_mode is correctly
configured.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: If400df94f970a55f3921a5a2df24038d28beb489
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 40e719618ec101235cdb1755933e719abd873239
Original-Change-Id: Ia042ea8c63c2306e9d6a80d8efa66c4fc0722d85
Original-Reviewed-on: https://chromium-review.googlesource.com/229615
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
I2C bus SDA hold time can be marginal with 60ns value, especially
when there is level shifter on the bus. So program it to 300ns
based on Fast-mode specification, which is between 0 to 900ns.
Apply the same timing for Standard-mode as well.
Refer to original bug on BayTrail chrome-os-partner:28092, this
is to carry forward the fix to Broadwell.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:33378
TEST=suspend resume test, watch for I2C errors
Change-Id: I93200b141602163903f5c9f52b94013bcf3382a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 72b82a1d5d836594e7d0f95972cc0dc91ae7ff8c
Original-Change-Id: I995d6868a44f2578a6d0b18dd5e8548f3c3cd494
Original-Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226386
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9467
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
MEI PCI device has internal logic to flush out the posted writes
before returning completion for non-posted request. When doing a RCBA
write to function disable and then using the PCI CFG RD cycle, need
to do RCBA posting read after writing to it to make sure the write
went through.
As Aaron sugegsted, abstracted function disable path to a common
function.
BUG=chrome-os-partner:33048
TEST=run warm and cold reboot testing
Change-Id: I40d374f1712a9137b3b1eac6bbf2d71078840406
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f10b368e01aae1fc5dda63f7ac0641dd2636c949
Original-Change-Id: I87aa8ccd604446263fc3621c9a01839a5a75b644
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9462
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31424
TEST=Build a image and run on Samus proto boards to confirm if the
settings are applied correctly.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: I9147da86ce26ce7ef1c7034bc3dde0b27b63befa
Original-Commit-Id: 1717505a3fdf41c5972b1c929872577247f9e3b5
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I8138507506771148420a585fd12897a3bfe91916
Original-Reviewed-on: https://chromium-review.googlesource.com/221387
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9463
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
DDI-A should not need re-enabled in the resume path, just
the resume path when we did not execute VBIOS.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus, test suspend+resume
Change-Id: I29d67591ac903bc1d712a956462bcf4a764ef2eb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c3fbeac10f3834a6d848154aa3449672871b13df
Original-Change-Id: Iaf7d083c5c92c42b7a117e2d2c9546ada6bf5f76
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221988
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9461
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to report the GPE that woke the system to the kernel
coreboot needs to keep track of the first GPE wake source and
save it in NVS so it can be returned in \_GPE._SWS method.
This is similar to the saving of PM1 status but needs to go
through all the GPE0_STS registers and check for enabled and
triggered events.
A bit of cleanup is done for areas that were touched:
- platform.asl was not formatted correctly
BUG=chrome-os-partner:8127
BRANCH=samus,auron
TEST=manual:
- suspend/resume and wake from EC event like keyboard:
ACPI _SWS is PM1 Index -1 GPE Index 112 ("special" GPIO27)
- suspend/resume and wake from RTC event:
ACPI _SWS is PM1 Index 10 GPE Index -1 (RTC)
- suspend/resume and wake from power button:
ACPI _SWS is PM1 Index 8 GPE Index -1
- suspend/resume and wake from touchpad:
ACPI _SWS is PM1 Index -1 GPE Index 13
- suspend/resume and wake from WLAN:
ACPI _SWS is PM1 Index -1 GPE Index 10
Change-Id: I574f8cd83c8bb42f420e1a00e71a23aa23195f53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4e06c7dfc73f2952ce8f81263e316980aa9760f
Original-Change-Id: I9bfbbe4385f2acc2a50f41ae321b4bae262b7078
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220324
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Most Baytrail based devices MMIO registers are reported in ACPI
space and the device's PCI config space is disabled. The PCI config
space is required for many "legacy" OSs that don't have the ACPI
driver loading mechanism. Depthcharge signals the legacy boot
path via the SMI 0xCC and the coreboot SMI handler can switch the
device specific registers to re-enable PCI config space.
BUG=chrome-os-partner:30836
BRANCH=None
TEST=Build and boot Rambi SeaBIOS.
Change-Id: I87248936e2a7e026f38c147bdf0df378e605e370
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dbb9205ee22ffce44e965be51ae0bc62d4ca5dd4
Original-Change-Id: Ia5e54f4330eda10a01ce3de5aa4d86779d6e1bf9
Original-Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219801
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
Original-Tested-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/9459
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
While upstreaming, some old (or downstream) names sneaked in.
Change-Id: I148fd8f46bc88c38ce1f62efe5771555bd5dcc5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9350
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns broadwell to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Auron and Samus.
Change-Id: I0cb6aa3d17ce28890e586be1c2c7ad16d91dd925
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23bcaa8110c4b63999c6ebf370045e9bef87ce6e
Original-Change-Id: I613ec0e2b970c75d1f8f7d9bb454bcf11abc78f0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224507
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This patch aligns baytrail to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Rambi.
Change-Id: I0f0a894f6f33449756582eefa0b50bae545220db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1216a86538517c03a7e5bca547d08ff3dbcaa083
Original-Change-Id: If5d2a609354b3d773aa3d482e682ab97422fd9d5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9363
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Disable VC setting for HDA so hdmi audio choppy issue will be eliminated.
Change HDA initialize steps to sync with UEFI reference code.
BUG=chrome-os-partner:25651
BRANCH=Baytrail
TEST=Does not have choppy noise during video playing
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Change-Id: I45d49123d369b7d075776215e709af5801ea696d
Original-Reviewed-on: https://chromium-review.googlesource.com/186024
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Tested-by: Benson Leung <bleung@chromium.org>
Original-Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
(cherry picked from commit 9f725a40f77cd684b2e230bd226d78d87b56e73b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4fc10a161e5996e14d4823491fb62a7beff39bcc
Reviewed-on: http://review.coreboot.org/9297
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On the SMM APM_CNT_FINALIZE step reinitialize the SPI
controller so that it can still log events after the SPI
controller has been locked down.
BUG=chrome-os-partner:24624
BRANCH=baytrail
TEST=Built and booted. Events still logged after SPI controller
has been locked down.
Original-Change-Id: I41a3e12c0398303e74f95eb6df82d5bc4303898b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/185630
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 28ffb1a9e761cdfeb173bd533684db1011260e0a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia82753cba9ae4f049de2e81061739efc21d49a1e
Reviewed-on: http://review.coreboot.org/9296
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Drop the inner underscore for consistency. Follows the
commit stated below.
Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172
Reviewed-on: http://review.coreboot.org/9290
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
When turning up the CPU frequency set it to turbo if that is
a possibility. Also only set the frequency on the boot CPU
since that is all we need it on, this will allow the 1-core
turbo ratio.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I573eb7a507305814ec48cc2f624b8e6ddad43f84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d408c1b462983c682d61c6c447692391c2b52183
Original-Change-Id: Ib5ad746767ee0a56bc7e59de679a9342f053c0e5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234401
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The romstage_main routine takes three parameters: bist, tsc_low and
tsc_hi. However in cache_as_ram.inc only the bist value is being
passed. This patch adds the two halves of the TSC value.
BRANCH=none
BUG=None
TEST=Build and run on Samus
Change-Id: I3d216edd0be65f29b51a66ed67b2d17910a594d4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: de565f28dce8a549d74defbcf5eaf8116bb1b831
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Change-Id: I34fb21e493dcb3a44426ba7964cd72a319a4254e
Original-Reviewed-on: https://chromium-review.googlesource.com/231173
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9280
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This was copied and pasted more than it should have been...
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I5008f2992d8ab3b952042415af6d7844788e14fc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bff4570dffa413c4fc4dfd8c49920f6b951e944a
Original-Change-Id: I2af9a30f3df733af147e8759f78a9802d2296c0f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230753
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9276
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These are board specific adjustments that can be made for each
USB3 port.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: Iaa3ce09419dfd64e3e8187f6dc073a8c68565337
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 21000496bb4560c9d1452a128335bbf24ca1b0aa
Original-Change-Id: Iab92ff7b0218d4abd9eba8a94d34ddd9a30ddb87
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9275
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BRANCH=master
BUG=chrome-os-partner:33113
TEST=Build a image and test on Rambi.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I37add87e6fd3e7ad4eee09b8e0b312a2a89c7948
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 59b4c94be46b4397de7cb32726da9fa216e75a4c
Original-Change-Id: I22c8f9730cc0e1ecc991f2dd7f2a1e7c548a1789
Original-Reviewed-on: https://chromium-review.googlesource.com/226654
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9272
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 31d7276fbdca67937bcdf0d5c2af371a2fd1a510
Original-BUG=chrome-os-partner:31424,chromeos-os-partner:32380
Original-TEST=Build a BIOS image and check the value is applied correctly.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I0adda3643776b259a635a021babd983090f1df43
Original-Reviewed-on: https://chromium-review.googlesource.com/220475
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id88c11ed128b44c3a60ef1a141b99071c1ee15d3
Reviewed-on: http://review.coreboot.org/9267
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This function needs to be available in different LOGLEVELs.
BUG=chrome-os-partner:28234
BRANCH=samus
TEST=USE=quiet-cb emerge-samus coreboot
Change-Id: Ib56995db64a7417a637eb8a93350fc40e6f83340
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 716d26c82a7df1dccf8956f301ab0e103fcedcff
Original-Change-Id: Ia8f0d05af24c9070c8c9241a3a7e137f845d1cab
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221540
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9262
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The rmod_stage_load structure contained the same fields
as struct prog. In order to more closely integrate with the
rest of program loading use struct prog.
Change-Id: Ib7f45d0b3573e6d518864deacc4002802b11aa9c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9143
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=chrome-os-partner:31424
TEST=Build an image and confirm the settings are correctly applied
to registers for PCIe L1 Sub-State feature enabling.
Original-Commit-Id: b94c8c715febe3a04bfdf52f7b69d73ece0f6faf
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I07ce6eea648b1b37d606f5529edad184e3de70ac
Original-Reviewed-on: https://chromium-review.googlesource.com/222599
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I07336599797c09bf23e5b15059d6ad812fdc7c61
Reviewed-on: http://review.coreboot.org/9223
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Disable ADSP D3 and SRAM power gating features by default, and make
the devicetree.cb flags into enable flags instead of disable.
BUG=chrome-os-partner:31588
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: Ibda298b995b07a2826a406e74e0d244b1fd97746
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b81ef37c036d61dc56e650796227dcc84a7ccc89
Original-Change-Id: Ib881290acc07819b55d776d4696bf0062df4d50e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9218
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add event log entry if GPIO27 is used to wake the system.
This GPIO is treated separately from other GPE and it is
one of the only events that can wake from Deep Sx.
BUG=chrome-os-partner:31549
BRANCH=samus
TEST=samus: suspend/resume and wake from keypress, check for
GPIO27 event in event log.
Change-Id: If699640701b0afcd0843c2a99546ee6bb9d09361
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0f1cccfd00552dafbaa91acc362b5e35474c3a95
Original-Change-Id: I38a44a62f68288a4ae3f97fe078ca222fd01390a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9213
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Need END tag, "REG_SCRIPT_END", to indicate the end of smbus_init_script.
BUG=chromium:416651
TEST=test on Auron.
Change-Id: Ieeaf6c705aa673acc9bb2635e103c4148bc8742f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 172c5fc259a2f6d09daccb1fe53fe0aa7c5601e1
Original-Change-Id: I1f5624f4c6ce7f0e8ceb8971aaa595d99e9ff82e
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220934
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set Root Port 0 PCI CFG Offset 0xE2[5:4] before ASPM configuration.
BUG=chrome-os-partner:31424
TEST=Build an image, and check the procedure and recommended setting
is applied correctly.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I94820787d4ed4a6bf8db8898b7de14467c9d6630
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24bdea6cd67d5657b94058233cd26130f68c44e4
Original-Change-Id: I98713f615885ac02867942ece2be1cea8ce04ab2
Original-Reviewed-on: https://chromium-review.googlesource.com/219994
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9211
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
OBFF: Disable it by clearing bit fields in that W/O register.
RO: Enable Relaxed Ordering from each enabled Root Port.
Linker Arbiter: Set it to recommended setting.
BUG=None
TEST=Build an image and check the setting are applied correctly on
Samus.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I7a72217729d6f6ff5320738245c380c887c5912f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 465b0a37c381930a4f0d74cd4fd69503a082911b
Original-Change-Id: I284e9eba1c2fceb690d3ef48b45a6f36d07ff84c
Original-Reviewed-on: https://chromium-review.googlesource.com/219993
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9210
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Extended PCIe Capability and Advanced Error Report locates at
offset 0x100 is W/O, and the subsequent write following the 1st
write to the register takes no effect.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d2862b6c1ccc77845cb3e08688a72c0655ea79c9
Original-BUG=chrome-os-partner:31424.
Original-TEST=Build a image and check the programming value is correct on
Original-Samus.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I0bed30f516ee0307b4a86cad2f669a18ff4994db
Original-Reviewed-on: https://chromium-review.googlesource.com/219985
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3711aa0f1f918baebb4fd77a3615bdf5956ba844
Reviewed-on: http://review.coreboot.org/9209
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Synchronize the code with FRC.
Change-Id: I50d2a02971681bbfcf4135482b5b95a41ddaac36
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c891a3e0474235bd97268f52d09ddff574caeb95
Original-BUG=None
Original-TEST=Build coreboot image and run on Samus to confirm the setting
is properly applied.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: If387a23749b6e9470c7e67286234e18ab3e423b3
Original-Reviewed-on: https://chromium-review.googlesource.com/219523
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9208
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8455d95442ee9a39ecb182abf319469dde06d324
Original-BUG=None
Original-TEST=Modify settings, build and update the image to Samus and
Original-check the settings are applied to Registers.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I3d407b8f1cb4a6ea3d6879a8581156a73f98220f
Original-Reviewed-on: https://chromium-review.googlesource.com/219073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ide6e747f1eccb74be2e21e76f592a919399bee31
Reviewed-on: http://review.coreboot.org/9206
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Intel will be making slight changes to USB3 PLL VCO and iCLK PLL current
on C0 stepping of BYT-M/D C0 stepping in order to meet the high demands
for these processors.
Pre-conversion materials are compatible with USB PLL VCO current increase.
Post-conversion materials ARE REQUIRED to be run with increased USB3 PLL
VCO current.
BUG=chrome-os-partner:31199
TEST=Boot Rambi, then read USHPHY_CDN_PLL_CONTROL and verify register
has new value.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bc01a3df80f5bd7fd86047c8bbf1584d19363e3b
Original-Change-Id: Ie9c3d0afd54ea7ced2c76ebb948de95be0828fa0
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211337
Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit df20eca47ca0ff33baf5d554ef11dd2b35706a5d)
Original-Reviewed-on: https://chromium-review.googlesource.com/205970
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217772
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I1c825992a2b4dfac86f77cde567d2471ca4c19e6
Reviewed-on: http://review.coreboot.org/9200
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
According to BIOS spec 8.14
B0:D28:F0[5:4] should be set to 11
BRANCH=none
BUG=chrome-os-partner:28234
TEST=build ok, boot to Auron and Samus
make sure register is set and PCIE is working
Change-Id: I4a7e990993c230dfc1ba83ea75f56757c2c18e46
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 82826e3c44c26252697677ec08b95a8f174bc360
Original-Change-Id: I7c37245053ceae460dac0f18363f585244db72f8
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217414
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9197
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In the case of an EC wake event that is pending but not cleared
it is possible for the EC wake pin (i.e. GPIO27) to be asserted
after the kernel triggers the sleep SMI but before the system
goes to sleep.
If this happens then the GPE will be reported as a wake source
when the system wakes up again.
BUG=chrome-os-partner:33218
BRANCH=samus,auron
TEST=build and boot on samus, use the keyboard to enter suspend
with suspend_stress_test and ensure that only the RTC is listed
as a wake source upon resume.
Change-Id: Id900132bb81e4cf50885a652ed00a142d951ea4d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50396ab6a3a3efb3b3dea4f1c2a8f8804fed943e
Original-Change-Id: I319dc22e21126a3086415f8f8b2b35eaec66fd50
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225540
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Disable Root Port0 only when there is no PCIe device
present on any root port.
BUG=None
TEST=Boot Rambi with PCIe installed/non-installed on RP0 to
confirm the RP0 is correctly enabled/disabled. However, I still
need someone to help check if RP0(no device) is still enabled
if there is device on other RPs since since I have no devices
having slots from RP1/2/3.
Change-Id: Iae552975250ed6f309c423b847621b8994172891
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c5cef0b7c2c146f0d46ed49b75fd2ec8369210ce
Original-Change-Id: I7147569e78b2d1ecea070bc933773cdcae59f9e7
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217791
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9219
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Report PCI routing table of all PCIe root ports for legacy interrupt.
Some PCIe devices using legacy interrupt can't work if PCI routing table
isn't defined. It's necessary and defined in BWG Chapter 28.1.3.
BUG=chrome-os-partner:31943
TEST=compiled and tested
BRANCH=NONE
Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>
Change-Id: I2c684edfd1fc624bed471783584250cd9f5e66f5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b9040d564a32607327057a84b9aab14e66cd5b45
Original-Change-Id: Ia15ced6c5fdcc6712e5f2831e42c6dee320f166b
Original-Reviewed-on: https://chromium-review.googlesource.com/218422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Commit-Queue: Ted Kuo <tedkuo@ami.com.tw>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Reviewed-on: http://review.coreboot.org/9201
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since the E0 and F0 stepping parts have the same CPUID it is
necessary to use the MCH PCI device revision to determine what
the actual stepping is.
Add this decode table so the early output gives proper identification
of the installed CPU type.
BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus with E0 and F0 parts
Change-Id: Idce1e289cd958c77febc87395f27570247512a87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a5346141e45b105a35a7641f60b29e02ab2bdfa3
Original-Change-Id: I1bc127badd75ecc34d3d2dbae5d272bd4d9f9082
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223158
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9228
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The F0 stepping has the same CPUID as E0 stepping so report
it as either stepping to avoid confusion.
BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I99a83855b4393d736724836b709702417483b5d2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 55ed3bc880c31c0ca5c8a21c335722af05eb57f7
Original-Change-Id: Ia4955f346ceb9be92e06ecea5b7a8fe2db84cabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223097
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9226
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix the typo of sate to state and add uKernel phase to just
output the current state byte.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I5f341ee6c58487aeb927cab0641742cb4071a6b7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: de6149508c50d0770fedfbe352e9149abea87b4c
Original-Change-Id: I520a4cc75faffa5feeb6113ffd7b07a48c4e6f28
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222677
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9225
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In commit 72a8e5e751a7fa97c9d198f68cad49f9d9851669 the
Makefile's were updated to use named types for cbfs
file addition. However, the call sites were not checked to
ensure the types matched. Correct all call sites to use the
named types.
Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9195
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: I4110debd6d3818d4a803ed22037166c226f2ed11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9142
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: Ia912902e8276d13b8e1716aa16c57b111579a03d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9141
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This change also depends on mrc due to changes in pei_data.h
Report smbios type 17 for each memory
CQ-DEPEND=CL:210005
BUG=None
BRANCH=None
TEST=Compiles successfully
See smbios type17 in OS by dmidecode
Original-Change-Id: If83c99364726cd17c719a59ed8ac993736c63b9a
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210399
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 6da6b4ffb3a45fdd766b88220c2adb168b3c5e10)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I39ea9ef9b342239fe26846ab0a928f6a680c21e8
Reviewed-on: http://review.coreboot.org/8956
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. Fixed some errors in selftest compare to reference.
2. Some WA steps for xhci in sleep trap is only for lpt.
BUG=chrome-os-partner:28234
TEST=compile ok, run selftest on auron to verify
boot to OS
BRANCH=None
Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Change-Id: Iaccb087581d5f51453614246bf80132fcb414131
Original-Reviewed-on: https://chromium-review.googlesource.com/215646
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kane Chen <kane.chen@intel.com>
Original-Tested-by: Kane Chen <kane.chen@intel.com>
(cherry picked from commit 97761b4ad3073fff89aabce3ef4f763383ca5cad)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2b1d5be4f8a13eb00009a36a199520cd35a67abf
Reviewed-on: http://review.coreboot.org/8971
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
some clock gating and pcie settings are missed in original code
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
verify registers between samus and crb
Original-Change-Id: I931276adb2f2667c4f9e7611acfd709b7232d492
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214568
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 57e42c781d435092a08238461f0605dbf092e576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia62a50f28a411bbd2ba51b94de17ca70051ea093
Reviewed-on: http://review.coreboot.org/8967
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This can be used to know if HSIO registers need updating in ramstage
but it is not possible to query the ME for HSIO version after sending
the DRAM-init-done message.
BUG=chrome-os-partner:28234
BRANCH=samus
TEST=build and boot on samus, check for HSIO version messages in log
Original-Change-Id: Id6beeaf57287e8826b9f142f768636a9c055d7eb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214259
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 637cbf5c1a1d922dab3f8a5cd4b3cd05617d1b92)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I29ce907804e892afde5f91e0b21688a50217cf13
Reviewed-on: http://review.coreboot.org/8966
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This macro is incorrect and should be counting by dword instead of byte.
The effects of this were subtle: incorrect events in ELOG and hanging when
waking from USB input because PME_B0 was not disabled properly.
BUG=chrome-os-partner:31611
BRANCH=none
TEST=test wake from suspend with USB keyboard
Original-Change-Id: I7caf1d46283071787550a9765703897181774957
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214258
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 3cfc4a1812466cb1c1317b8f21321aafee623857)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e2f8190d824692ecb961615becf65319a6ffd8b
Reviewed-on: http://review.coreboot.org/8965
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
- The SATA CAP register setup was moved outside the refcode blob we run
so it needs to be set up by coreboot again...
- Slight tweak to fast ramp voltage for broadwell CPU
BUG=chrome-os-partner:25491
BRANCH=None
TEST=Build and boot on samus
Original-Change-Id: I7bdc0811ad8f28ab0912972036dca59d229b0173
Original-CSigned-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-CReviewed-on: https://chromium-review.googlesource.com/214024
Original-CReviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5d166a0c4d206eaa885ecebaa0c3cefefdc59280)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id58d3bee5e713139edf6e8fda8cdf4c48ba95bd1
Reviewed-on: http://review.coreboot.org/8964
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This can be shared between mainboards, they are still free
to override if needed.
BUG=chrome-os-partner:28234
BRANCH=none
TEST=build and boot on samus
Change-Id: I85fae6e254adcbda1c52410d5ba046f3f05b54c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/213792
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 3e40cb804e7a95ce2183ebb3ef5d86820aef61b5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8961
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The original code won't set power gating for disabled port correctly,
due to it must be set before Lock
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
verify bit 24, 26 is set in RCBA(0x3a84) for samus
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Change-Id: Id78d391ac657665a972cb4fd1810df6304a5a6ab
Original-Reviewed-on: https://chromium-review.googlesource.com/213561
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Queue: Kane Chen <kane.chen@intel.com>
(cherry picked from commit 066c8c81df8be9ae9ab7b33342a93b0b3ea7b240)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic7c87b04863f93de5665d72e0f95b4105b1d4d3b
Reviewed-on: http://review.coreboot.org/8960
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
fixed a coding error and sync sata configuration with ref code
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
verify registers between samus and crb
Original-Change-Id: I09dd80a9772ac82b841363a540c9b7a8689e04a9
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/213137
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 0fbb59e3c5117a513ef19117560bb41dfe8c0d71)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I99a389b06f4ec077c298100ca878c68ef69debfa
Reviewed-on: http://review.coreboot.org/8959
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This was a merge error when I was pulling in some of the
code into this file I put it after the read of CAP2 but
before it is modified and written back. In the end the
DEVSLP bits are getting set/cleared that need to but the
other bits in the register may be wrong. Also when enabling
devslp set the devslp-present bit in each enabled port.
Also remove much of the 0:1f.2@0x98 setup and the attempt
to write (the write once) CAP register that is already
being written in the reference code.
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I467f3c15b9f4d4c814ba0ef8baf95739b4bc6662
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212308
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9110a42982183b2954c865abbf18e008a39c997c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7db5c7ccf619aa28856388dd40f59495ef6d7e77
Reviewed-on: http://review.coreboot.org/8958
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
In order to prevent possible TPM lockout due to PLTRST assertion
shortly after powering up add a small delay before the reset.
This will affect cold power up only, reboot/resume/warmboot will
all have the flex ratio locked already so this reset is unneeded.
BUG=chrome-os-partner:29859
BRANCH=None
TEST=build and boot on samus. I tried unsuccessfully to trigger the
TPM lockout, but I was not able to do that consistently without this
patch so it is unknown yet whether this is 100% effective.
Original-Change-Id: Ief8c9261c0268b0f90a3022213ebd2b06633b481
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211893
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 20413f2eafa144f5f381eb6f92d8b959415ca049)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I665e9ed1faa65e88d988660a24bdad40a4c5ab7e
Reviewed-on: http://review.coreboot.org/8957
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
TCO registers are 16bit not 32bit. Also do not log the
TCO reset event in S3 resume path to avoid it being logged
when TCO is not actually tripping.
BUG=chrome-os-partner:28234
BRANCH=None
TEST=manual:
1) build and boot on samus
2) modify kernel command line with nmi_watchdog=0
3) while sleep 1 ; do echo -n V ; done > /dev/watchdog &
4) fg 1
5) ctrl-Z
6) wait for reboot
7) check event log for TCO event
8) check suspend/resume path to ensure no TCO event logged
Original-Change-Id: I9cd8627de8498b280deb088f3a8e1e20546e2f96
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211840
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5952fe4672d07bd39e345f2048c2bfc510bf9f2a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6cdeffb8b50c5001d714edd3a1264cf117cd1ad6
Reviewed-on: http://review.coreboot.org/8954
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
- ADSP IRQ should be exclusive
- HDA should write reg 0x43 even if disabled
- A few clock gating tweaks based on ref code changes
- Move SATA clock gating to sata.c where SIR changes are done
- Add support for enabling Deep SX in AC/DC modes
- CLKREQ VR Idle for enabled PCIE ports
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: Icece58e32b7a5d2b359debd5516a230cae3fd48c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211611
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c0e22ba043ed96bdddca4989b2f29d0e989f6fef)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If5f5e1666aa9660e31305ee6369f2febf6757b99
Reviewed-on: http://review.coreboot.org/8952
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Workaround for auto shutdown issue on broadwell SKU.
Now we can see C7 transition, and MRC fastboot
BUG=chrome-os-partner:29787,chrome-os-partner:29117
BRANCH=None
TEST=build ok and boot on samus
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Id: 932152b16c3943b00bd317e7370402dda451529f
Original-Change-Id: Id1f174b67fa3e6f248dd8b21aee25e6e01abf33e
Original-Reviewed-on: https://chromium-review.googlesource.com/210870
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Kane Chen <kane.chen@intel.com>
Original-Commit-Queue: Kane Chen <kane.chen@intel.com>
(cherry picked from commit 932152b16c3943b00bd317e7370402dda451529f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie9fb792635b39d33136cef576ae5559013d5947a
Reviewed-on: http://review.coreboot.org/8950
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Changes from 2.1.0 reference code release.
BUG=chrome-os-partner:28234
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I6110a9bdb2973f1a134d8105c37659bf43f61d34
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210607
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ef660ddc6c17a003f06b8995e821c7642c49a56e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibb41cd7369cfc7b9b86b61460650a56415b3d8fb
Reviewed-on: http://review.coreboot.org/8949
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This is useful for debug and testing.
BUG=chrome-os-partner:29649
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I9050e75fd7c308ebd97d196298c687f8b0f8f97d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210599
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 2831154af4f33717489cb0b62aef228fb8f7c2e2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie622df02d9ab219cefce5f11332e010b47e3ec6e
Reviewed-on: http://review.coreboot.org/8947
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The GCC 4.9.2 update showed that the boot_state_init_entry
structures were being padded and assumed to be aligned in to an
increased size. The bootstate scheduler for static entries,
boot_state_schedule_static_entries(), was then calculating the
wrong values within the array. To fix this just use a pointer to
the boot_state_init_entry structure that needs to be scheduled.
In addition to the previous issue noted above, the .bs_init
section was sitting in the read only portion of the image while
the fields within it need to be writable. Also, the
boot_state_schedule_static_entries() was using symbol comparison
to terminate a loop which in C can lead the compiler to always
evaluate the loop at least once since the language spec indicates
no 2 symbols can be the same value.
Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8699
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change generates the ASL tables needed for the PCIe bridge routing.
It generates this ASL (swizzled for each of the 8 functions)
Name(RP1P, Package()
{
Package() {0x0000ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 },
Package() {0x0000ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 },
Package() {0x0000ffff, 2, \_SB.PCI0.LPCB.LNKG, 0 },
Package() {0x0000ffff, 3, \_SB.PCI0.LPCB.LNKH, 0 },
})
Name(RP1A, Package()
{
Package() {0x0000ffff, 0, 0, 20 },
Package() {0x0000ffff, 1, 0, 21 },
Package() {0x0000ffff, 2, 0, 22 },
Package() {0x0000ffff, 3, 0, 23 },
})
Device(RP01) {
Name(_ADR, 0x1c0001)
Name(_PRW, Package() {
0, 0
})
Method(_PRT,0) {
If(PICM) {
Return (RP1A)
} Else {
Return (RP1P)
}
}
}
Change-Id: Id51261c11f8457fe2150f2b646aafc4fe1ffec30
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8429
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is nothing platform specific in retrieving S3 resume state from
romstage_handoff structure. Boards without EARLY_CBMEM_INIT update
acpi_slp_type from ACPI power-management block or scratchpad registers.
Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8188
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
BUG=chrome-os-partner:31424
BRANCH=none
TEST=build only, due to I don't have broadwell system with wifi to test
need somebody help me to verify
Change-Id: I52360176e135ea7f01cc67a926be4870265f57d1
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/220743
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/8448
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
At some point the license text for a file was incorrectly
changed. That license was then copied and pasted. I'm sure it
was myself. Anyhow, fix the bustedness.
Change-Id: I276083d40ea03782e11da7b7518eb708a08ff7cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8620
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add a driver wich can handle the internal I2C controllers
of Baytrail SoC. This driver is not suitable for the
SMBus controller.
Change-Id: I841c3991a2fb0f8b92b8e59ec02d62f5866f5bdf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8401
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a new microcode for Bay Trail M D0 stepping used
in cpu N2807 silicon.
In addition, a selection of the used CPU type has
been added (I or M/D) which allows to use only the
really needed microcode for a given CPU type.
Change-Id: I373fc9b535f1dc97eaa9f76ae46f0b69b247a8a0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8399
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
During the development of commit bde6d30 (x86: Change MMIO addr
in readN(addr)/writeN(addr, val) to pointer), there were several iterations
and patterns tried. An intermediate pattern was the use of u32 pointers,
and division by sizeof(u32). Some of these did not get properly
changed to pointer types of length 1, causing a regression in
the Intel Ibex Peak SATA driver, fixed in commit 9b5f137
(Intel ibexpeak: Fix SATA configuration).
Other regressions of this pattern are fixed here. I audited all changes
to u32 types, and the other ones are safe.
Change-Id: I9e73ac8f4329df8bf0cdd1a14759f0280f974052
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Reviewed-on: http://review.coreboot.org/8530
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix up commit ce7ecf9c (baytrail: enable monotonic timer), which
selected `HAVE_MONOTONIC_TIMER` explicitly, although it is already
selected by `TSC_MONOTONIC_TIMER` (cf. `src/cpu/x86/Kconfig`).
Therefore remove the explicit selection of that Kconfig option.
Change-Id: I8964771947a6f7457dcdefe7a17be623ae0ef900
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8471
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
No real harm done (thanks to our free() implementation),
but let's do it right.
Change-Id: Ib98d28aabc043dff5c288728c33490a79f09f35a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8511
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
SUPPORT_CPU_UCODE_IN_CBFS is a deprecated option now that all CPUs
with updateable microcode (except AGESA) load microcode from CBFS.
CPU_MICROCODE_ADDED_DURING_BUILD is a state variable that is set
based on user's choice in the microcode menu and should not be changed
directly.
Eliminate INCLUDE_MICROCODE_IN_BUILD variable, whose use directly
interferes with the microcode mechanism, remove selection of
CPU_MICROCODE_ADDED_DURING_BUILD, and do not depend
SUPPORT_CPU_UCODE_IN_CBFS on anything. This makes usage of the
microcode mechanism consistent with other CPUs in the tree.
This incorrect usage of the Kconfig variables was hiding the fact that
some of the microcode files present in fsp_baytrail/microcode_blob.c
were not present in the tree.
Change-Id: I71cb3f834c22c0363a20bd469797a9f51c215371
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8484
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The existing code generated invalid ACPI processor objects
if the core number was greater than 9. The first invalid
object instance was autocorrected by Linux, but subsequent
instances conflicted with each other, leading to a failure
to boot if more than 10 CPU cores were installed.
The modified code will function with up to 99 cores.
Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8422
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
|
|
Add two macros to gpio.h which allow to setup 20K
pull-up or pull-down resistor for a given GPIO.
Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8402
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
By adding a description to ME_PATH it becomes visible
and editable in menuconfig.
Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8398
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Because the pointer to the FSP HOB list is now being saved, we can
use that to find the top of usable memory. This eliminates the need
to hardcode the size of the FSP reserved memory area.
Tested on minnowboard max for baytrail.
The HOB structure used does not seem to be present for the rangeley
or ivybridge/pantherpoint FSPs. At the very least, the GUID is not
documented in the integration guides.
Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8308
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR.
Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
1) Save the pointer to the FSP HOB list to low memory at address 0x614.
This is the same location as CBMEM_RESUME_BACKUP - the two aren't used
in the same platform, so overlapping should be OK. I didn't see any
documentation that actually said that this location was free to use, and
didn't need to be restored after use in S3 resume, but it looks like
the DOS boot vector gets loaded juat above this location, so it SHOULD
be ok. The alternative is to copy the memory out and store it in cbmem
until we're ready to restore it.
2) When a request for the pointer to a CAR variable comes in, pass back
the location inside the FSP hob structure.
3) Skip the memcopy of the CAR Data. The CAR variables do not
get transitioned back into cbmem, but used out of the HOB structure.
4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform.
Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8196
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Drop the implementation of statically allocated high memory
region for CBMEM. There is no longer the need to explicitly
select DYNAMIC_CBMEM, it is the only remaining choice.
Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The name was always obscure and confusing. Instead define cbmem_top()
directly in the chipset code for x86 like on ARMs.
TODO: Check TSEG alignment, it used for MTRR programming.
Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7888
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This replaces need for separate cbmemc_reinit() calls made
via CAR_MIGRATE() and in ramstage.
Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7859
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e
and fixes the build issue that cuased it to be reverted.
Verstage will host vboot2 for firmware verification.
It's a stage in the sense that it has its own set of toolchains,
compiler flags,
and includes. This allows us to easily add object files as needed. But
it's directly linked to bootblock. This allows us to avoid code
duplication for stage loading and jumping (e.g. cbfs driver) for the
boards
where bootblock has to run in a different architecture (e.g. Tegra124).
To avoid name space conflict, verstage symbols are prefixed with
verstage_.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac
Original-Reviewed-on: https://chromium-review.googlesource.com/204376
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf
Reviewed-on: http://review.coreboot.org/8224
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Due to some projects don't have the correct settings in devicetree.cb
so put this change in case those projects without are setting in devicetree.cb
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
even there is no setting in devicetree
Original-Change-Id: Iaf8155497c41f10c81d1faa7bb0e3452a7cedcc6
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/209051
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 713f809952a2d8da434d619d48cb7ddce1991925)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I86f9b77e703d2b844fa636678499c47ffaffeede
Reviewed-on: http://review.coreboot.org/8218
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
USBPHY_COMPBG needs to be configured by project
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
Original-Change-Id: I05eee384d94cf5deeec14418bd78816df0b26a92
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208557
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 20a9c0ab7ab180596821751110f0c0a35d3ff3a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8bed3fa4e74e4bb4c93fa522d9df631bac2d9795
Reviewed-on: http://review.coreboot.org/8216
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
No reason to carry timestamps on CAR stack, as implementation
of timestamps internally stashes on CAR_GLOBAL table and migrates
those to CBMEM.
Change-Id: I5b3307df728b18cd7ebf3352f7f7e270ed1e9002
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8022
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Put functions in appropriate pre-processor sections to avoid
false-positive 'unused function' compiler warnings.
Change-Id: Ia83d721827ad9924807c0ca5ebd681060af49a82
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8203
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Put function under same guard as its call site so that the
compiler does not emit a warn about unused functions upon
a false branch of the guard.
Change-Id: I899d539ec5fbb87e7469415cc8d15837ba8e63f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8156
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
I would appear from commit a6354a1 that this is now dead code.
Change-Id: I0f74183c9a5d8cc6ff5a11409d487cc45d9ed2df
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8168
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
