summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2018-12-07soc/intel/apollolake: Print ME version on exit of BS_DEV_INIT stageKarthikeyan Ramasubramanian
Recently there has been a change to print ME version. But the stage at which the version is printed causes the HECI device to remain in D0 state. This in turn prevents the SoC from entering S0ix state. This change moves printing ME version a little earlier so that the HECI device is put into D0i3 state by FSP and the SoC can enter S0ix state successfully. BRANCH=octopus BUG=b:120571529 TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that the device boots to ChromeOS. Ensure that the device enters S0ix successfully(using suspend_stress_test -c 25). Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07soc/intel/cannonlake: Fix I2C clock inputDuncan Laurie
The input clock for the I2C controllers was set at 133MHz but should really be 216MHz according to the kernel: https://patchwork.kernel.org/patch/10408729/ "Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C." This change was tested on a sarien board where an I2C trackpad that was measuring ~700MHz on I2C and is now measuring ~380MHz. Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30061 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06soc/intel/apl: Warn if CBFS is outside the memory mapped areaNico Huber
As part of the memory mapped BIOS region is covered by SRAM, check that CBFS always fits the effectively mapped region of flash. This is usually taken care of by reserving the SRAM range in the FMAP (e.g. as BIOS_UNUSABLE), but can be missed. Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-06src/soc/intel/braswell/southcluster.c: Config i8254 timerFrans Hendriks
ISA timer is not configured. Add call setup_i8254(). BUG=N/A TEST=Intel CherryHill CRB Change-Id: If45c4975d147f28a456198ea290efba1c8b0464b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05soc/intel/baytrail: Implement POSTCAR stageArthur Heymans
Use common code to tear down CAR. Change-Id: I62a70ae35fe92808f180f2b5f21c5899a96c2c16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/baytrail: Use postcar_frame functions to set up frameArthur Heymans
Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29929 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/baytrail: Improve CAR setupArthur Heymans
This patch does the following: - improve the style by removing tabs in front of jmp addresses - Make the code for zeroing variable MTRR more readable (copied from cpu/intel/car) - Fetch PHYSMASK high from cpuid instead of Kconfig Change-Id: I6ba67bb8b049c3f25b856f6ebb1399d275764f54 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/broadwell: Implement postcar stageArthur Heymans
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05smmstore: make smmstore's SMM handler code follow everything elsePatrick Georgi
Instead of SMMSTORE_APM_CNT use APM_CNT_SMMSTORE and define it in cpu/x86/smm.h Change-Id: Iabc0c9662284ed3ac2933001e64524011a5bf420 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30023 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05elog: make elog's SMM handler code follow everything elsePatrick Georgi
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in cpu/x86/smm.h Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30022 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/common/lpc_lib: Add function to disable LPC Clock RunNico Huber
Needed to fix up FSP-S bug on Apollo Lake. Change-Id: If09fee07debb1f0de840b0c0bd7a65d338665f7c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-04soc/intel/common: Limit BIOS region cache to 16MBLijian Zhao
Cache BIOS region can boost boot performance, however it can't be over 16MB, according to processor EDS vol1(Apollolake/Skylake/WhiskeyLake), FLASH+APIC LT will be less than 20MB under 4G. Set the maxiam to 16GB to save numbers of mtrr entries. BUG=b:119267832 TEST=Build and boot up fine on whiskeylake rvp platform. Change-Id: I46a47c8bf66b14fb2fcb7b6b1d30d02886c450a4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add USB device namesDuncan Laurie
Add the ACPI device names for the USB ports to match what is in the DSDT so USB ports can be defined in the SSDT. Change-Id: Ibb323bbd324811fa3178b0cba3d7f0a315169486 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Increase bootblock sizeDuncan Laurie
Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a cannonlake board it is over the current 32K limit. Change-Id: I155cb0a6af1746af6833fa9f35c2ea6fe0bc709f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add DPTF ACPI codeDuncan Laurie
Define the constants that DPTF expects from the SOC in order to use the common DPTF ACPI code. For cannonlake this indicates the CPU device is called B0D4 and is at PCI address 00:04.0. Change-Id: I43c2f8dd7281d3e9f791ab01478ee7823fd6b128 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29759 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Add method for temp conversionDuncan Laurie
Add a method to convert from 1/10 Kelvin to Celsius. This is useful for EC devices where the sensor temperature are stored in Celsius instead of Kelvin. Change-Id: I6b1154f5ba13416131a029966d6d5c1598904881 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/cannonlake: Load FSP teardown optionallyLijian Zhao
Make build still pass in case of no FsptUpd.h available. BUG=N/A TEST=Delete FsptUpd.h and build pass wihtout FSP_CAR set. Change-Id: I3936d3deb8b079bd4db11e444f6bb7f9605520dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/intel/apl: Configure LPC serial IRQ modeNico Huber
Sync the FSP settings with what coreboot does. Why both FSP and coreboot configure this redundantly stays a secret. TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC works correctly now, but was confused by the wrong settings before because the FSP defaults allowed to disable the LPC clock. Change-Id: Id1c7180f460678bf0f9458228591050dd628c052 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/fsp_baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I01e4397b9a1c15eff4b856cbc697fa2b4bc9761f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/denverton_ns: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: If482c64e7133cc6d82472d121ac138fc1b60a183 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/common: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/broadwell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: I79d2eed9b89b420554ce10d1fc0f151b1872afe2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/braswell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I93c11e89da34c5432c6ce0415998b47bad339763 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29889 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Ifb5a5c1255f9a922063293bf430e849909468eaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29888 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/skylake: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I182585fd09e4ce848c860d00eb612e8f5fdde35e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29884 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-11-29{mb/cubieboard,soc/intel/quark}: Remove define __SIMPLE_DEVICE__Elyes HAOUAS
Remove the __SIMPLE_DEVICE__ define from files used only in romstage. This is not required since romstage always defines __SIMPLE_DEVICE__. Change-Id: I8db1b15c9186536c9b8a6b5d667fa5a11af1bad2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29821 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28soc/intel/{baytrail,broadwell}: Correct Chromeos RAM reservationFrans Hendriks
RAM is reserved for Chromeos even when Chrome is not used. Use CONFIG_CHROMEOS to determine is RAM must be reserved. BUG=N/A TEST=Intel BayTrail CRB Change-Id: Ic1f5089227f802e2b2f62dc02fa0d1648c1855b5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28soc/intel/icelake: Fix IO decode setupSubrata Banik
Make pch_early_iorange_init() function similar to soc/intel/cannonlake/bootblock/pch.c while fixing below issue: * COM1 not being enabled properly. TEST=Able to get serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I5ab02f46d27e667be3d9328d94b634ef04038d2f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-11-28src/soc/intel/braswell/include/soc/irq.h: Change PIRQ_PIC_IRQDISABLE valueFrans Hendriks
Using 0 for PIRQ_PIC_IRQDISABLE might conflict with using IRQ0 as PIRQ. Change PIRQ_PIC_IRQDISABLE value to 0x80, so value 0 is reserved for IRQ0. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I18706f12e7c2293e948eb10818393f0d1870f514 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28src/soc/intel/braswell/include/soc/iomap.h: Correct IO_BASE_SIZE and ↵Frans Hendriks
ILB_BASE_SIZE The sizes of IO_BASE and ILB_BASE areas a incorrect. Correct IO_BASE_SIZE and ILB_BASE_SIZE values. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I23c3fd608598c5ec2271d393168ac4bf406772b4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-28soc/intel/braswell/northcluster.c: Reserve local APIC resourcesFrans Hendriks
The resources of the local APIC are not reserved. Use mmio_resource() to add local APIC resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ieb9de45098d507d59f1974eddb7a94cb18ef7903 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28src/soc/intel/braswell/acpi/lpc.asl: Add ACPI and GPIO basesFrans Hendriks
ACPI and GPIO base are used by LPC controller, but not reserved. Both bases are added to the LPC device resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I5248694b497c4965d79dd7c25ec97592dc0dddbc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-27soc/intel/cannonlake: Delete unused macros in lpc.hSubrata Banik
TEST=Able to build and boot successfully. Change-Id: If013d8e59046152e9f1a026f48bd9cd9b43ab6af Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29836 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27soc/intel/skylake: Add device settings for PL4 power limitPraveen hodagatta pranesh
PL4 is a preemptive CPU package peak power limit,it will never be exceeded. Power is preemptively lowered before limit is reached. This change provides option in devicetree and feeds FSP PowerLimit4 UPD for power limit purpose. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I64b5a029104a102e5741e8b37c7992f2693180e8 Reviewed-on: https://review.coreboot.org/c/29808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27soc/intel/common: Add audio controller device id for SKL-H pchPraveen hodagatta pranesh
This patch add new HDA controller pci id in common hda driver. BUG:None TEST:Boot to Yocto linux on kabylake rvp11 and verified audio playback functionality. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I820115c31bf6b8e1f1afe900b68690d84b51c259 Reviewed-on: https://review.coreboot.org/c/29807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-26soc/intel/icelake: Add support to enable/disable USB charging in s3/S5Aamir Bohra
Change-Id: I0559b8a546f7a67759377c7f51b2faa2280aa797 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29793 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23soc/intel/apollolake: Remove cycle in Kconfig symbol dependenciesPatrick Georgi
Change-Id: Iad60a5c8863283b7d373e1f6aaff48c40b7bb274 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23src/soc/intel/braswell/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I348eda57ab9dc0bd45f8dc9ab0e7c47c462102fe Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29788 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23src/soc/intel/baytrail/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel BayTrail CRB Change-Id: I3fe50effdb8236bc45d33a2345a773653df68d90 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-23soc/intel/skylake: Drop FSP_CAR optionsNico Huber
It's not implemented for Skylake, all combinations that try to enable it either result in Kconfig or linker errors. Move `config SKIP_FSP_CAR` into drivers/intel/fsp1_1 where it's effective. TEST=Built Intel/Kunimitsu (FSP1.1) and Intel/KBLRVP8 (FSP2.0) default configs with and without this patch: binaries stay the same. Change-Id: Iae0a2d2c7fd7a71ed24118564e6080c4789cda28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-23intelblocks/cpu: Fix wrong comment for P_Req field in PERF_CTL MSRWerner Zeh
The mentioned bits 14:8 are wrong as the functions always write bits 15:8. What happens is visible in the written code. There is no need for an extra comment. Change-Id: I59b4d24d01a0a8fa74912f9754e7bbb217ca269d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-23soc/intel/apollolake: Add Kconfig switch to enable minimum clock ratioWerner Zeh
Add a Kconfig switch to be able to set the CPU clock to the lowest possible ratio. If enabled the CPU will consume as little power as possible while providing the lowest performance. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to its need. Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23intelblocks/cpu: Add function to set CPU clock to minimum valueWerner Zeh
Provide a library function to set the CPU frequency to minimum value. This will result in the lowest possible CPU clock with the lowest possible power consumption. This can be useful in mobile devices where the power dissipation is limited. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to it's need. Change-Id: I817095b13ab8cbaab82f25c72947b00ee854d549 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-23soc/intel/common: Bring DISPLAY_MTRRS into the lightNico Huber
Initially, I wanted to move only the Kconfig DISPLAY_MTRRS into the "Debug" menu. It turned out, though, that the code looks rather generic. No need to hide it in soc/intel/. To not bloat src/Kconfig up any further, start a new `Kconfig.debug` hierarchy just for debug options. If somebody wants to review the code if it's 100% generic, we could even get rid of HAVE_DISPLAY_MTRRS. Change-Id: Ibd0a64121bd6e4ab5d7fd835f3ac25d3f5011f24 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29684 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22soc/intel/icelake: Create macros for FSP consumptionSubrata Banik
1. Modify PCIEXBAR to accomodate Type-C Root Port 2. LPSS device mode selection Change-Id: Ib7e4bc304f93e4b63ac2d7f194ca441dd96dd943 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29697 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21soc/intel/fsp_broadwell_de: Add vboot supportPhilipp Deppenwiese
Enable vboot2 in romstage. Change-Id: I7f1a1e8538999c5e4e54f3a4aa0cdf6d8a309c4f Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21soc/intel/.../Kconfig: Drop SOC_INTEL_COMMON_BLOCK_I2C_DEBUGNico Huber
It's dead. Change-Id: I1fc051937a36878eab23f6022bc42028d5606c83 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-21soc/intel/braswell: Disable OS use of HPETFrans Hendriks
The timer interrupts don't appear when HPET is enabled. This result in Linux reporting 'MP-BIOS bug: 8254 timer not connected to IO-APIC' Enabling CONFIG_DISABLE_HPET disables OS use of HPET. Intel issue 4800413 (doc #5965535) reports Windows7/Ubuntu Installation Hang or Slow Boot Issue. BUG=Intel #4800413 TEST=Portwell PQ7-M107 Change-Id: Ie9a78dcc736eb057c040a0a303c812adb1f76f3c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2018-11-21soc/intel/cannonlake: Fix IO decode setupDuncan Laurie
This change makes the early IO decode setup mirror that of other Intel SOCs and fixes issues with COM1 not being enabled properly. Tested by successfully successfully receiving serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I9bd894fea62b78b81e5c80b5e88a539ebddac2df Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-20drivers/uart/Kconfig: Be smarter about DRIVERS_UART_8250IONico Huber
It defaults to y to avoid having to select it per mainboard. But that makes a mess because it results in linker conflicts unless other UART drivers disable it explicitly. We try to be smarter about the default value for now. The real solu- tion would be to hardcode it per mainboard. But who knows which boards actually have it? Change-Id: I7e755fe0e4f6d1c31ef2854603a5510c3cdc4967 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29571 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-19soc/intel/{common, skylake}: Make ASPM enabling as common PCH featureSubrata Banik
This patch moves required Kconfig selection for enabling ASPM feature (like clk_pm, L1 state etc) from soc code to intel common pch base code. TEST=Run lspci -vvv | grep ASPM The output shows the ASPM L1 is enable for pci devices Change-Id: Ic77602a75f0c9ccf28ebfd57e53433dc90985a16 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-19src: Add required space after "switch"Elyes HAOUAS
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-18soc/intel/.../Kconfig: Move GPIO debug option into debug menuNico Huber
Rename DEBUG_SOC_COMMON_BLOCK_GPIO to DEBUG_GPIO and move it into the Debugging menu. Change-Id: I737d0ee7fb5423b6d16d611a144d43fd3f168a2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-18soc/intel/common/*/Kconfig: Remove redundant commentsNico Huber
Change-Id: Ide9608e487793fa4a8b0e291ba168126e0484355 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-18soc/intel/{cnl, icl}: Remove unnecessary __SIMPLE_DEVICE__ checkSubrata Banik
soc_pch_pirq_init() function is only getting compiled for RAMSTAGE hence remove unused __SIMPLE_DEVICE__ check. Change-Id: I7f0ca62170f0af12a251c8c97155de8433a31854 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17soc/intel/icelake: Make static IRQ mapping for PIC modeSubrata Banik
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC. Change-Id: I9693f2a52529961e6b611b69e389f01f77f77d63 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17soc/intel/icelake: Make static IRQ mapping for ICP PCH pci devicesSubrata Banik
Since PIRQ->IRQ mapping registers PxRC are not available after FSP-S call due to PCH requirement change from CNP PCH onwards, hence making static IRQ mapping for pci_irqs.asl and pcie.asl Also remove unused irqlinks.asl from soc/intel/icelake/acpi/ Change-Id: Idec00c3b8a97cb5aa7b4000840aba914aea478c9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-17soc/intel/cannonlake: Add options for pcie ltrLijian Zhao
FSP can support enable/disable Pci express LTR (Latency Tolerance Reporting) mechanism through upd interface. Include that into coreboot side. BUG=N/A TEST=N/A Change-Id: I69b423afa4f81a2d58375734bba07792e08931d5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29642 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16SMBIOS: Remove duplicated smbios_memory_type enumElyes HAOUAS
Change-Id: I49554d13f1b6371b85a58cc1263608ad9e99130e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-11-16src: Remove unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29302 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16soc/intel/denverton_ns/Kconfig: Remove unused HSUART_FUNCElyes HAOUAS
Change-Id: I1ec6f0687083c17314588c85af289b4b27c5441c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29598 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16soc/intel/common/Kconfig: Remove unused SOC_INTEL_COMMON_SMIElyes HAOUAS
Change-Id: Ic4ea1d681d2677880b155713c34152ac0861146b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16soc/intel/{broadwell,skylake}: Remove unused SERIAL_CPU_INITElyes HAOUAS
Change-Id: I2296ab3c53a82ee990649e35e1370e1dd304e392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16soc/intel/braswell: add vmx support via CPU_INTEL_COMMONMatt DeVillier
Braswell allready supported vmx, but offered no mechanism to unset it, nor to set the lock bit required for Windows to recognize virtualization. Enable this functionality by adding CPU_INTEL_COMMON config. Test: build/boot Windows 10 on Braswell ChromeOS device, verify Windows shows virtualization as enabled. Change-Id: I0d39abaeb9eebcceb37dc791df6b06e521fe1992 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/29570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16fsp_broadwell_de: Switch to common SPI controller driverWerner Zeh
The common SPI controller driver in src/southbridge/intel/common does match the SPI controller included in the PCH of Broadwell-DE SoC. Switch to the usage of this driver and delete the dedicated one for the FSP based Broadwell-DE implementation. TEST: Boot mc_bdx1 with SPI driver active in romstage Change-Id: I4fe8057ea1981e350659a5caa9912fb758110115 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/29633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-15soc/intel/skylake/acpi/dptf: Add support for Multi-DPTF ProfileKarthikeyan Ramasubramanian
Currently mode-aware DPTF depends on Tablet Mode Switch to load the right table. This does not scale well with device types and configuration. This change helps to decouple the mode-aware DPTF from Tablet Mode Switch. This change allows ACPI to load the appropriate DPTF table based on the profile number as detected by EC. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ibffe9c58f970aec37aa74a040170c4cf559bab33 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29249 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15soc/intel/cannonlake: Make static IRQ mapping for PIC modeSubrata Banik
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC. Change-Id: I8722e34841fe53a4d425202b915ac7838af0d859 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29629 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-15soc/intel/cannonlake: Make static IRQ mapping for CNP PCH pci devicesSubrata Banik
Since PIRQ->IRQ mapping registers PxRC are not available after FSP-S call due to PCH requirement change from CNP PCH onwards, hence making static IRQ mapping for pci_irqs.asl and pcie.asl Also remove unused irqlinks.asl from soc/intel/cannonlake/acpi/ Change-Id: I35e2ed150a1db195fc9ce13897e65b23fc8b7ca1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-15src/cpu: Remove dead sourced linesElyes HAOUAS
Change-Id: I836ff09da17373d47daf21c98e5ab975836cd47e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-15oc/intel/quark/Kconfig: Remove unused MMCOMF_SUPPORT_DEFAULTElyes HAOUAS
Change-Id: I24596b7b4f3e7caef7f42e4317a786caa42c5c2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-13soc/intel/cannonlake: Remove SmbusEnableDuncan Laurie
Remove the SmbusEnable config option from devicetree and instead use the state of the PCI device to determine if it should be enabled or disabled. Change-Id: Id362009e4c8e91699d1ca9bb3c2614e21cfc462a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-13soc/intel/icelake: Update GPIOs for Icelake SOCAamir Bohra
This implementation updates the GPIO pins, communities and group mapping. Change details: 1. Update 5 GPIO community includes 11 GPIO groups GPIO COM 0 GPP_G, GPP_B, GPP_A GPIO COM 1 GPP_H, GPP_D, GPP_F GPIO COM 2 GPD GPIO COM 4 GPP_C, GPP_E GPIO COM 5 GPP_R, GPP_S 2. Update GPIO IRQ routing. 3. Add GPIO configuration for iclrvp board. Change-Id: I223abacc18f78631a42f340952f13d45fa9a4703 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-13soc/intel/common: Add option to call EC _PTS/_WAK methodsDuncan Laurie
Some embedded controllers expect to be sent a command when the OS calls the ACPI \_PTS and \_WAK methods. For example see the code in ec/google/wilco/acpi/platform.asl that tells the EC when the methods have been executed by the OS. Not all ECs may define these methods so this change requires also setting a Kconfig option to enable it. Change-Id: I6bf83509423c0fb07c4890986a189cf54afaed10 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-12src: Remove unneeded include "{arch,cpu}/cpu.h"Elyes HAOUAS
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-09soc/intel/apollolake: Disable HECI1 before jumping to OSFurquan Shaikh
This change disables HECI1 device at the end of boot sequence. It uses the P2SB messaging to disable HECI1 device before hiding P2SB and dropping privilege level. BUG=b:119074978 BRANCH=None TEST=Verified that HECI1 device is not visible in lspci on octopus. Change-Id: Id6abfd0c71a466d0cf8f19ae9b91f1d3446e3d09 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-09mb/intel/icelake_rvp: Move CNVi ASL entry from static DSDT to dynamic SSDT ↵Subrata Banik
generation This changes uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows in ACPI name space 2. Correct wake up shows in cat /proc/acpi/wakeup 3. Remove cnvi.asl from soc/intel/icelake Change-Id: I21d3818ac9e384b0dbaa330d231022bdb8b8a547 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-11-08soc/intel/common: Add option to disable eSPI SMI at runtimeDuncan Laurie
Add an option that will disable eSPI SMI when ACPI mode is enabled, and re-enable eSPI SMI when ACPI mode is disabled. Additionally it ensures eSPI SMI is disabled on the ACPI OS resume path. This allows a mainboard to ensure that the Embedded Controller will not be able to assert SMI at runtime when booted into an ACPI aware operating system. This was tested on a Sarien board with the Wilco EC to ensure that the eSPI SMI enable bit is clear when booted into the OS, and remains clear after resume. Change-Id: Ic305c3498dfa4b8166cfdb070fc404dd4618ba3c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-08soc/intel/skylake: Add PCH sku id's supported for KBLPraveen hodagatta pranesh
This patch also add new SKL PCH-H device id's in soc platform reporting and common lpc driver. BUG=None TEST=Booted kabylake RVP11 with HM175 SKL PCH-H and verified the device id in serial logs. Change-Id: I8c04bf8d9c27caad800427a5c29da869da1d445d Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-08soc/intel/apollolake: Improve cold boot and S3 resumeJohn Zhao
FSP 2.0.7.1 provides UPD interface to execute IPC command. Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay from default 100ms to 10ms to improve cold boot and S3 resume performance. BUG=b:118676361 CQ-DEPEND=CL:*703187 TEST=Verified system_resume_firmware_ec time reduction. Change-Id: I05656c9083a855112120b7f1b0ec01c42f582409 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/common: Include Icelake device IDsAamir Bohra
Add Icelake specific CPU, System Agent, PCH, IGD device IDs. Change-Id: I2c398957ffbc9bb0e5b363740d99433075ca66a3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/skylake: Add FSP CAR support for kabylakePraveen hodagatta pranesh
Kabylake RVP11 uses FSPT to support Intel security features like bootguard verify boot and measured boot. This patch add FSP CAR support for kabylake by programming tempraminit parameters in fspcar.c and also add FSP_T_XIP default if FSP_CAR is selected in order to relocate FSPT binary while adding it in CBFS so that it can be executed in place. BUG=None TEST=Build and Boot to UEFI payload on kabylake RVP11 board and verified for successful FSP CAR setup. Change-Id: Id180ff9191d734c581ba7bf3879eaa730a799b52 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07mb/{intel/google}: Move CNVi ASL entry from static DSDT to dynamic SSDT ↵Subrata Banik
generation This changes uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows in ACPI name space 2. Correct wake up shows in cat /proc/acpi/wakeup 3. Remove cnvi.asl from soc/intel/cannonlake Change-Id: Ic81de2dce6045ced913766790a40ed19119f5118 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/apollolake: Provide interface to update TCC offsetJohn Su
This change provides an interface for apollolake to set TCC before BIOS reset complete happens in romstage. With this change, we can add code to update Tcc in devicetree. BUG=b:117789732 TEST=Match the result from TAT UI Change-Id: I4419d3bbe2628fcb26ef81828d6325fc952dbabc Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-05src/soc/intel/braswell/romstage/romstage.c: Perform RTC init in romstageFrans Hendriks
soc_rtc_init() is executed in ramstage The soc_rtc_init() needs to be executeed before FSP is called. Move the RTC init from ramstage to romstage. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ic19c768bf9d9aef7505fb9327e4eedf7212b0057 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/29397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-05soc/intel/cannonlake: Enable ISH from deviceLijian Zhao
PCH ISH enabled/disabled in FSP memory init UPD, it will be match the setting in ISH device on/off in devicetree.cb. BUG=N/A TEST=Build and pass on whiskey lake rvp platform. Change-Id: I6889634bf65e7ce5cc3e3393c57c86d622f1ac68 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-11-05soc/intel/cannonlake: Remove depreciated UPD selectionLijian Zhao
Several FSP silicon init UPD have been moved to memory init stage, modify the coreboot accordingly. The UPDs below are affected: SkipMpInit VtdBaseAddress VtdDisable X2ApicOptOut BUG=N/A TEST=Build pass with FSP revision 7.0.47.50. Change-Id: Ic0416dcd9ea1fe063cdd0c2f27257cd4cb4ba7e8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29260 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05src: Remove unneeded include <arch/ioapic.h>Elyes HAOUAS
Change-Id: Ic08b191ee4dbcc56eb482601aa268394545936ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29292 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05soc/intel/icelake: Add PID based on Icelake EDSAamir Bohra
Change-Id: I2d9e06f06a39dc76a3c1351d7976505d7bd92d10 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/29436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-02soc/intel: Enable GPIO functions in verstageDuncan Laurie
Enable GPIO functionality in verstage so platforms can read a PCH GPIO in verstage to determine recovery mode. Change-Id: Icd4344c4d66dbe21fda9dc27e61a836c1dd9be07 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29407 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:52:17 +0000