summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Expand)Author
2014-05-15baytrail: nvm: use proper types for checking eraseAaron Durbin
2014-05-15baytrail: mrc_cache: check region erased before erasingAaron Durbin
2014-05-13baytrail: add C0 microcode updateAaron Durbin
2014-05-13baytrail: reboot with EC in S0 with no MRC cache and EC in RWAaron Durbin
2014-05-13baytrail: dptf: Add disable trip point methodsDuncan Laurie
2014-05-13baytrail: Updates for DPTF ACPI frameworkDuncan Laurie
2014-05-13baytrail: don't SMI on tco timer firingAaron Durbin
2014-05-13baytrail: clear the pmc wake status registersAaron Durbin
2014-05-13baytrail: log reset, power, and wake events in elogAaron Durbin
2014-05-13baytrail: snapshot power state in romstageAaron Durbin
2014-05-13baytrail: add cpuid for C0Aaron Durbin
2014-05-12baytrail: align with intel recommendationsAaron Durbin
2014-05-12baytrail: add way to load reference code from vboot areaAaron Durbin
2014-05-12baytrail: Expose IOSF as ACPI objectDuncan Laurie
2014-05-12baytrail: Put devices in ACPI mode after setupDuncan Laurie
2014-05-12baytrail: Add header include wrapper and offset defineDuncan Laurie
2014-05-10baytrail: cache reference code for S3 resumeAaron Durbin
2014-05-10baytrail: allow ramstage_cache_location() usage in ramstageAaron Durbin
2014-05-10baytrail: note S3 resume status earlierAaron Durbin
2014-05-10baytrail: utilize reg_script_run_on_dev()Aaron Durbin
2014-05-10baytrail: initialize perf/power registersAaron Durbin
2014-05-10baytrail: add more iosf access functionsAaron Durbin
2014-05-10baytrail: remove verbosity in iosfAaron Durbin
2014-05-10baytrail: Add support for LPSS and SCC devices in ACPI modeDuncan Laurie
2014-05-09baytrail: Basic DPTF frameworkDuncan Laurie
2014-05-09baytrail: Enable panel and set timingsDuncan Laurie
2014-05-09baytrail: allow SD card controller capabilities overridesAaron Durbin
2014-05-09baytrail: fix nvs offsetsAaron Durbin
2014-05-09baytrail: lpe audio device needs memory for its firmwareAaron Durbin
2014-05-08baytrail: gpio: Make GPIO inputs MMIO by defaultShawn Nematbakhsh
2014-05-08baytrail: enable lpe resources assigned to deviceAaron Durbin
2014-05-08baytrail: Fix _CRS to build with new IASLDuncan Laurie
2014-05-08baytrail: add lpe codec clock configurationAaron Durbin
2014-05-08baytrail: Add ACPI code to describe GPIO controllerDuncan Laurie
2014-05-08baytrail: Update to microcode 31E and fix C-state tableDuncan Laurie
2014-05-07baytrail: minor stylePatrick Georgi
2014-05-07baytrail: romstage: Add config option to enable RMTShawn Nematbakhsh
2014-05-07baytrail: pcie: Root port initializationAaron Durbin
2014-05-07baytrail: gpio: Fix NCORE gpio-to-pad LUTShawn Nematbakhsh
2014-05-07baytrail: enable caching and prefetching in spi controllerAaron Durbin
2014-05-07baytrail: fix direct irq pad configurationAaron Durbin
2014-05-07baytrail: ensure init_chromeos() is called in romstageAaron Durbin
2014-05-07baytrail: don't allow PCIE wake upsAaron Durbin
2014-05-07baytrail: gpio: Make pad input/output state mutually exclusiveShawn Nematbakhsh
2014-05-07baytrail: first pass at lpss device initializationAaron Durbin
2014-05-07baytrail: initialize eMMC deviceAaron Durbin
2014-05-07baytrail: initialize common SSC functionalityAaron Durbin
2014-05-07baytrail: add score and ssc iosf access functionsAaron Durbin
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
2014-05-06baytrail: gpio: Add support for direct / dedicated IRQsShawn Nematbakhsh
2014-05-06baytrail: add GPIO SMI supportAaron Durbin
2014-05-06baytrail: add support for routing gpio pins to smi/sciAaron Durbin
2014-05-06baytrail: fix fadt structure for gpe0 blockAaron Durbin
2014-05-06baytrail: Add microcode/punit release 31aDuncan Laurie
2014-05-06baytrail: Add ACPI CPU entriesDuncan Laurie
2014-05-06baytrail: Add BCLK and IACORE to pattrsDuncan Laurie
2014-05-06baytrail: Enable Turbo/Burst and set some magic MSRsDuncan Laurie
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
2014-05-06baytrail: add more irq defintionsAaron Durbin
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
2014-05-06baytrail: add support for S3 resumeAaron Durbin
2014-05-05baytrail: fix up FADTAaron Durbin
2014-05-05baytrail: interrupt routing supportAaron Durbin
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-04-30baytrail: Add default _OSC methodDuncan Laurie
2014-04-30baytrail: Add root bus resource regionsDuncan Laurie
2014-04-30baytrail: Add MCFG table to ACPIDuncan Laurie
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
2014-04-30baytrail: Add function to read top of low memoryDuncan Laurie
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
2014-03-11baytrail: Reserve memory between ASEG and 1MB and for ramoopsDuncan Laurie
2014-03-11baytrail: Add EHCI initializationDuncan Laurie
2014-03-11baytrail: Add XHCI initializationDuncan Laurie
2014-03-11baytrail: add audio clock workaround for LPEAaron Durbin
2014-03-11baytrail: add ccu iosf access functionsAaron Durbin
2014-03-11baytrail: HDA function disable workaroundAaron Durbin
2014-03-11baytrail: allow function disable on TXEAaron Durbin
2014-03-11baytrail: Switch graphics init to use reg_scriptDuncan Laurie
2014-02-27baytrail: use common code for iosf accessorsAaron Durbin
2014-02-27baytrail: add lpss iosf functions and regsAaron Durbin
2014-02-27baytrail: Fix EHCI function number and XHCI typoDuncan Laurie
2014-02-27baytrail: increment boot count for elogAaron Durbin
2014-02-27baytrail: add GNVS to cbmem and set acpi_slp_typeAaron Durbin
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
2014-02-27baytrail: Add IOSF functions for USBPHY and USHPHYDuncan Laurie
2014-02-27rambi: Enable internal keyboardDuncan Laurie
2014-02-27baytrail: Add SATA driverShawn Nematbakhsh
2014-02-27baytrail: add support for disabling south cluster pci devicesAaron Durbin
2014-02-27baytrail: use MCRX in iosf access functionsAaron Durbin
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
2014-02-24baytrail: Enable GFX deviceDuncan Laurie
2014-02-24baytrail: IOSF write functions need to set data before controlDuncan Laurie
2014-02-24baytrail: initialize chromeos EC if present in romstageAaron Durbin
2014-02-24baytrail: use version 2 of efi wrapperAaron Durbin
2014-02-24baytrail: remove gfx read_resources() work aroundAaron Durbin
2014-02-24baytrail: get rid of global microcode_ptrAaron Durbin
2014-02-24baytrail: add microcode version 319Aaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 14:33:12 +0000