| Age | Commit message (Collapse) | Author |
|---|
|
This fixes building with clang.
Change-Id: If2686b0938d34cd66393eb14205c5c8a5b3ba98b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The patch add APIs to check CSE Region's write protection information.
Also, adds helper functions to get the SPI controller's MMIO address
to access to BIOS_GPR0 register. The BIOS_GPR0 indicates write and read
protection details.
During the coreboot image build, write protection is enabled for CSE RO.
It is enabled through a Intel MFIT XML configuration.
TEST=Verify write protection information of CSE Region
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If1da0fc410a15996f2e139809f7652127ef8761b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds TCSS XHCI device ID for ADL-N CPU which is required
for USB3 port enumeration.
Document Reference: 645548 revision 1.0 (Chapter 2.3)
BUG=None
BRANCH=None
TEST=Check if device is detected correctly and ACPI entries are
generated for device 0d.0
Change-Id: Id5d42d60eb05137406ef45b9e87e27948fc3b674
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change provides config for devicetree to control ASPM per port
BUG=b:220079865
TEST=Build FW and run stress exceed 2500 cycles on taeko.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I19b5f3dc8d95e153301d777492c921ce582ba988
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62919
Reviewed-by: Peichao Wang <pwang12@lenovo.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteor Lake has the IOE Die for TCSS. This change adds the IOE P2SB
sideband access and exposes API for TCSS usage.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I01f551b6e1f50ebdc1cef2ceee815a492030db19
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch creates a new helper function to enable P2SB BAR.
`p2sb_dev_enable_bar()` takes the PCI P2SB device address (B/D/F)
and BAR address (combining high and low base addresses).
BUG=b:224325352
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ica41e8e8bdfcfe855e730b3878b874070062ef93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This message is not really an error message, so BIOS_ERR is
inappropriate. The message does seem more like a warning though,
that the developer could have multiple Kconfigs selected to send EOP,
therefore switch to BIOS_WARN instead.
BRANCH=firmware-brya-14505.B
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I57a34334007a6a7443302c2f25de3d5c87c85573
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
TCSS ASL code was carried forward from TGL and it used to follow the same
sequence.
Recently as part of s0ix hang issue, it was found that sending IOM
MCTP command as part of TCSS D3 Cold enter-exit sequence created an
issue.
We discovered that due to change in hardware sequence, ADL should not
set/reset IOM MCTP during D3 cold entry or exit. This patch removes the
bit setting from ASL file to prevent hang in the system.
This patch also removes obsolete Pcode mailbox communication which is
no longer required for ADL.
BUG=b:220796339
BRANCH=firmware-brya-14505.B
TEST=Check if hang issue is resolved with the CL and no other regression
observed
Change-Id: I2f066bcc4a8f475a15ddd12ef5ed87d7298312bb
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62861
Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This message is not really an error message, so BIOS_ERR is inappropriate. Since the message is informational, switch to
BIOS_INFO instead.
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I9dc852a0cd30f95506c205f161a05e8a8c44fcd5
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch refactors the current P2SB common code driver to accommodate
the future SoC platform with provision of more than one P2SB IP in
disaggregated die architecture.
IA SoC has only one P2SB in PCH die between SKL to ADL. Starting with
MTL, one more P2SB IP resides in IOE die along with SoC die. (PCH die is
renamed as SoC in MTL.)
P2SB library (p2sblib.c) is common between PCH/SoC and IOE, and p2sb.c
is added only for PCH/SoC P2SB.
BUG=b:224325352
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib671d9acbfdc61305ebb401499bfc4742b738ffb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add ADL-P MCH ID 4, 8, 9, 10 into this list.
BUG=b:222038287
BRANCH=firmware-brya-14505.B
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I2cee31ba56e0b142c50a745c453968635e86296e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Cache the BIOS region and extended BIOS region if the boot device is
memory mapped, which is mostly the case with Intel SoC platform.
Having the ROM region cached helped to improve the pre-boot time.
TEST=Able to boot redrix to Chrome OS without seeing any sluggishness.
Additionally verified on EHL board (from siemens), shows significant
savings in payload loading time as below:
Here is the timestamp snippet showing the payload load time as a
comparison between current upstream and the patched version:
upstream:
90:starting to load payload 1,072,459 (1,802)
958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619)
with this patch:
90:starting to load payload 1,072,663 (2,627)
958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I02b80eefbb3b19331698a205251a0c4d17be534c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch provides a way to cache `ext_bios` region for all stages to
save boot time.
TEST=Able to see the ext_bios region in MTRR snapshot when cached on
the Brya variants.
Here is the timestamp snippet showing the payload load time as a
comparison between current upstream and the patched version:
upstream:
90:starting to load payload 1,072,459 (1,802)
958:calling FspNotify(ReadyToBoot) 12,818,079 (11,745,619)
with this patch:
90:starting to load payload 1,072,663 (2,627)
958:calling FspNotify(ReadyToBoot) 5,299,535 (4,226,871)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87139a9ed7eb9ed43164a5199aa436dd1219145c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
As per ME BWG, the patch retries MEI CSE DISABLE command if CSE doesn't
respond or sends the garbled response. It retries the command
additionally 2 more times.
TEST=build and boot the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Id38a172d670a0cd44643744f27b85ca7e368ccdb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As per ME BWG, the patch retries END_OF_POST command if CSE doesn't
respond or sends the garbled response. It retries the command
additionally 2 more times.
BUG=b:200251277
TEST=Verify EOP retry mechanism for brya board.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ieaec4d5564e3d962c1cc866351e9e7eaa8e58683
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US,
which controls how long to wait for an I2C devices to
produce/accept all the data bytes in a single transfer.
(The device can delay transfer by stretching the clock of
the ack bit.)
The default value of this new setting is 500ms. Existing
code had timeouts anywhere from tens of milliseconds to a
full second beween various drivers. Drivers can still have
their own shorter timeouts for setup/communication with the
I2C host controller (as opposed to transactions with I2C
devices on the bus.)
In general, the timeout is not meant to be reached except in
situations where there is already serious problem with the
boot, and serves to make sure that some useful diagnostic
output is produced on the console.
Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to
512 in the SoC Kconfig and drop it from the mainboard Kconfigs.
Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI ID's for APL/GLK so they can use HDA.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I37df388a93ffc06e716085a58d0d00ed5c6fa9e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
FSP has a parameter to enable/disable c1-state autodemotion feature.
Boards/Baseboard can choose to use this feature as per requirement.
This patch hooks up this parameter to devicetree
BUG=b:221876248
BRANCH=firmware-brya-14505.B
TEST=Check code compiles and correct value has been passed to FSP.
Change-Id: I2d7839d8fecd7b5403f52f3926d1d0bc06728ed9
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
coreboot chip.h files mainly contains variable which allows board to
fill platform configuration through devicetree.
Since many of this configuration involves FSP UPDs, variable names were
in camel case which aligned with UPD naming convention.
By default coreboot follow snake case variable naming, so cleaning up
file to align all variable names as per coreboot convention.
During renaming process, this patch also removes unused variables
listed below:
-> SataEnable // Checked in SoC code based on PCI dev enabled status
-> ITbtConnectTopologyTimeoutInMs // SoC always passes 0, so not used
Note: Since separating out changes into smaller CL might break the
compilation for the patch set, this is being pushed as a single big CL.
BUG=None
BRANCH=firmware-brya-14505.B
TEST=All boards using ADL SoC compiles with the CL.
Change-Id: Ieda567a89ec9287e3d988d489f3b3769dffcf9e0
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Commit hash b8b40964 ( mb, soc: Add the SPD_CACHE_ENABLE) introduced
per mainboard logic to invalidate the mrc_cache.
This patch moves mrc_cache invalidating logic into IA common code and
cleans up the code to remove unused argument `dimms_changed` from SoC
and mainboard directory.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6f18e18adc6572571871dd6da1698186e4e3d671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This patch adds `FSPM_UPD *` as argument for
mem_populate_channel_data() and read_spd_dimm().
This change will help to update the architectural FSP-M UPDs in
read_spd_dimm().
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I770cfd05194c33e11f98f95c5b93157b0ead70c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This patch modifies `memcfg_init` and `variant_memory_init`functions
argument from FSP_M_CONFIG to FSPM_UPD.
This change in `memcfg_init()` argument will help to update the
architectural FSP-M UPDs from common code blocks rather than going
into SoC and/or mainboard implementation.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
The patch uses generic enum type values for EOP command handler. So,
it renames cse_eop_result enum type to cse_cmd_result and also renames
the enum values to have generic name.
TEST=Build the code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ie0efa8fff08318ed863010db289959d113f4767e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch implements error handling as per the ME BWG guide. The BWG
recommends HECI interface reset if there is a timeout or malformed
response is received from the CSE. Also, the patch triggers HECI
interface reset if the CSE link state is not ready in the heci_send()
API.
TEST=Verify HECI Interface reset in the simulated error scenarios.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I3e4a97800cbc5d95b8fd259e6e34a32fc82d8563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch implements below changes:
1. Implements different error codes and use them in appropriate
failure scenarios of below functions:
a. heci_send()
b. recv_one_message()
c. heci_receive()
2. As heci_send_receive() is updated to return appropriate error codes
in different error scenarios of sending and receiving the HECI
commands. As the function is updated to return 0 when success, and
non-zero values in the failure scenarios, so all caller function have
been updated.
BUG=b:220652101
TEST=Verified CSE RX and TX APIs return error codes appropriately in
the simulated error scenarios.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ibedee748ed6d81436c6b125f2eb2722be3f5f8f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This updates energy performance preference value to all logical CPUs
when the corresponding chip config is true.
BUG=b:219785001
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Ie59623fe715b0c545f8d4b6c22ab2ce670a29798
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Get boot performance timestamps from CSE and inject them into CBMEM
timestamp table after normalizing to the zero-point value. Although
consumer CSE sku also supports this feature, it was validated on
CSE Lite sku only.
BUG=b:182575295
TEST=Able to see TS elapse prior to IA reset on Brya/Redrix
990:CSME ROM started execution 0
944:CSE sent 'Boot Stall Done' to PMC 88,000
945:CSE started to handle ICC configuration 88,000 (0)
946:CSE sent 'Host BIOS Prep Done' to PMC 90,000 (2,000)
947:CSE received 'CPU Reset Done Ack sent' from PMC 282,000 (192,000)
0:1st timestamp 330,857 (48,857)
11:start of bootblock 341,811 (10,953)
12:end of bootblock 349,299 (7,487)
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Idcdbb69538ca2977cd97ce1ef9b211ff6510a3f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As part of boot time optimization, one of the culprit was CSE where
response to End Of Post (EOP) command used to take ~60ms. Earlier patch
was pushed to delay the EOP to reduce response time to ~5-7 ms. During
this stage overall platform boot time was ~1.15 seconds.
Once boot time was optimized to ~ 1 seconds, CSE EOP time again
increased to ~80 ms since coreboot used to send EOP at the time where
CSE was busy. This created some back and forth moving of sending EOP
command function within coreboot sequence.
Upon debugging using traces, it was found that coreboot used to send
EOP late where CSE was busy loading other IP payload, so it might take
more time to respond.
In order to avoid delayed response, coreboot has to send EOP in
stage when CSE is done with firmware init and it will be ready to
serve EOP as soon as possible. This also aligns with previous flow where
FSP used to send EOP once silicon init is done and coreboot used to
rely on FSP to send this message.
Moving EOP to earlier stage (From SoC) meets the requirement and CSE EOP time
reduces from ~60 ms to ~20 ms on Brya board.
Note that once SoC code sends EOP, coreboot common code won't send it
again since common code already has check in case EOP is sent earlier.
BUG=b:211085685
BRANCH=firmware-brya-14505.B
TEST=Tested on Brya system before and after the changes. Observed ~40ms
savings in boot time.
Change-Id: I9401d5e36ad43cdc0dfe947aabc82528d824df9b
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Earlier while trying to optimize boot time End Of Post (EOP) time kept
increasing (~80 ms) when boot time decreased to around 1 second.
This was because CSE was busy with own firmware loading.
When EOP was moved later in boot stage it again created issue since CSE
got busy with other payload loading for OS boot, so response to EOP
got delayed by ~70-80 ms.
In order to avoid delayed response, coreboot has to send EOP in
stage when CSE is done with firmware init and it will be ready to
serve EOP as soon as possible. This also aligns with previous flow
where FSP used to send EOP once silicon init is done and coreboot used
to rely on FSP to send this message.
Moving EOP to BS_DEV_INIT boot state meets this requirement and CSE EOP
time reduces from ~60 ms to ~20 ms on Brya QS board.
Since this setting might vary for each SoC, SoCs can decide when to send
EOP in the boot sequence. This patch adds Kconfig option to send EOP via
SoC
BUG=b:211085685
BRANCH=firmware-brya-14505.B
TEST=Code compilation is fine for Brya board. Boot time test is done
using entire patchset and EOP time is reduced to ~25ms from earlier ~80ms.
Change-Id: I9c7fe6f8f3fadb68310d4a09692f51f82c737c35
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Hook up vtd_enable to CMOS value of "vtd".
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16b43f0489f652d650e820c36b2b9bea61cf3c8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This solved the error:
i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
i801_smbus 0000:00:1f.1: PCI INT A: not connected
i801_smbus 0000:00:1f.1: SPD Write Disable is set
i801_smbus 0000:00:1f.1: SMBus using polling
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Idebd581b7ed6d193d83340b7dc94248df43525c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reference: chapter2 in Meteor Lake EDS vol1 (640228)
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie71abb70b88db0acec8a320c3e2c20c54bbb4a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62581
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some non-SoC code might want to know whether or not the CNVi DDR RFIM
feature is enabled. Also note that future SoCs may also support this
feature. To make the CnviDdrRfim property generic, move it from
soc/intel/alderlake to drivers/wifi/generic instead.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Idf9fba0a79d1f431269be5851b026ed966600160
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
|
|
Add SOC_INTEL_CSE_LITE_COMPRESS_ME_RW Kconfig to enable compression on
ME_RW blobs. Select the Kconfig to add LZMA compressed ME_RW blobs to
ME_RW_A/B regions.
On ADL-N, this results in savings of ~665KB in each of ME_RW_A/B
regions.
FMAP REGION: ME_RW_A
Name Offset Type Size Comp
me_rw 0x0 raw 1275246 LZMA
(1957888 decompressed)
(empty) 0x1375c0 null 193056 none
FMAP REGION: ME_RW_B
Name Offset Type Size Comp
me_rw 0x0 raw 1275246 LZMA
(1957888 decompressed)
(empty) 0x1375c0 null 193056 none
Change-Id: I2e31c358b4969b077d65ce6369a877914d573aed
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hook PCH_DEVFN_CNVI (0c.0) to CnviMode.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8b51e98952a39bd432e9bc63eea57a40dd6cf106
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Device 1f.7 is TraceHub, not the PCH Thermal device, which doesn't exist
anymore on TGL. Correct the device´s alias.
Reference: Intel doc# 631119-007
Change-Id: I30a4ab1e801f6cdb0f2e03f105bf8cc09592eed8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I937bdf032e1ed86900334d41655f3e6272f66a6f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch aims to make timestamps more consistent in naming,
to follow one pattern. Until now there were many naming patterns:
- TS_START_*/TS_END_*
- TS_BEFORE_*/TS_AFTER_*
- TS_*_START/TS_*_END
This change also aims to indicate, that these timestamps can be used
to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Denverton is a special version of IFD2 flash layout. It defines
10GbE firmware regions (11/12) and the IE (10) region which
other IFD2 platforms do not have. Denverton does not include the
legacy GbE region (3) or the EC region (8) which other IFD2
platforms do have.
TEST='ifdtool -p dnv coreboot.rom' and verify correct output
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: I15939ce4672123f39a807d63c13ba7df98c57523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These helpers are not architecture dependent and it might be used for
different platform.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ic13a94d91affb7cf65a2f22f08ea39ed671bc8e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62561
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows complains on missing drivers for these ACPI devices. Hide them
from OS as it doesn't influence the hardware operation. Linux can
still probe the drivers correctly.
TEST=Boot Windows 11 and see there are no devices with missing drivers.
Boot Ubuntu 20.04 and check that drivers corresponding to ACPI HIDs are
still probed.
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I6c30c08ab730749bddef7ea67c7470c1554bd572
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch uses Kconfigs for Descriptor Region and Descriptor Region
size instead of locally defined macros
TEST=Build and boot Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I3f9461c8604383f995a4438f45286b14fb94deaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
The patch defines Kconfigs for FMAP Descriptor Region and Descriptor
Region size. The Kconfigs will be used by follow-up patches.
TEST=Build Brya code
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ia3481acefbda885617607675aef2afbb81c21c77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with
PCI_{DID,VID}_ using the commands below, which also take care of some
spacing issues. An additional clean up of pci_ids.h is done in
CB:61531.
Used commands:
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g'
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g'
Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In order to cache the spd data which reads from the memory module, we
add SPD_CACHE_ENABLE option to enable the cache for the spd data. If
this option is enabled, the RW_SPD_CACHE region needs to be added to
the flash layout for caching the data.
Since the user may remove the memory module after the bios caching the
data, we need to add the invalidate flag to invalidate the mrc cache.
Otherwise, the bios will use the mrc cache and can make the device
malfunction.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=build pass and enable this feature to the brask
the device could speed up around 150ms with this feature.
Change-Id: If7625a00c865dc268e2a22efd71b34b40c40877b
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62294
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot should skip sending EOP during S3 resume since CSE doesn't
require EOP in resume path.
Currently EOP is being sent during PAYLOAD_BOOT or PAYLOAD_LOAD stage
which doesn't get called during S3 resume.
In case EOP is moved in earlier stage, coreboot might send EOP in S3
resume as well. This patch adds check before calling cse_send_eop.
BUG=b:211085685
BRANCH=None
TEST=Check by moving EOP to earlier stage. EOP sending is skipped during
S3 resume.
Change-Id: I8f22446974bc1e7b2d57468633c36bb99ffe1436
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently the LPIT Get Constraints _DSM subfunction returns a package
containing the path to a nonexistent device (\NULL). This is used to
work around an issue with Windows, where returning an empty package will
cause a BSOD. However, using this non-existent device can also cause
confusion, as on Linux, it shows an error in dmesg, e.g.
ACPI Error: AE_NOT_FOUND, While resolving a named reference package
element - \NULL (20200925/dspkginit-438)
Therefore, this patch modifies this returned package slightly to include
the path to ACPI_CPU_STRING for CPU 0, which should always be emitted on
Intel platforms that use the PEP driver.
Tested on google/brya0 on ChromeOS 5.10 kernel
Tested with current Windows 11 ISO
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If74a1620ff0de33bcdba06e1225c5e28c64253e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com>
|
|
This fixes no practical problem, especially for coreboot where only
one process should access the SPI controller. It makes the code look
more spec compliant.
As per EDS, SPI controller sets the HSFSTS.bit5 (SCIP) when software
sets the Flash Cycle Go (FGO) bit in the Hardware Sequencing Flash
Control register.
Software must initiate the next SPI transaction when this bit is 0.
Add non-blocking mechanism with `5sec` timeout to report back error
if current SPI transaction is failing due to on-going SPI access.
BUG=b:215255210
TEST=Able to boot brya and verified SPI read/write is successful.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4d35058244a73e77f6204c4d04d09bae9e5ac62c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
The mainboard_memory_init_params takes the struct FSP_M_CONFIG as the
input which make the board has no chance to modify data in the
FSPM_UPD, for example, set FspmArchUpd.NvsBufferPtr = 0. After changing
the FSP_M_CONFIG to FSPM_UPD, the board can modify the value based on
its requirement.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=build pass
Change-Id: Id552b1f4662f5300f19a3fa2c1f43084ba846706
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
coreboot uses port index which is 0 based for all PCIe root ports.
In case of PCIe remapping logic, coreboot reads LCAP register from PCIe
configuration space which contains port number (mostly 1 based). This
assumption might not be true for all the ports in coreboot.
TBT's LCAP registers are returning port index which are based on 2.
coreboot's PCIe remapping logic returns port index based on index 1.
This patch adds variable to pcie_rp_config to pass lcap_port_base to the
pcie remapping function, so coreboot can map any n-based LCAP encoding
to 0-based indexing scheme.
This patch updates correct lcap_port_base variable for all PCIe root
ports for all SOCs, so that function returns correct 0-based index from
LCAP port number.
BUG=b:210933428
BRANCH=None
TEST=Check if code compiles for all ADL boards
Change-Id: I7f9c3c8e753b982e2ede1a41bf87d6355b82da0f
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61936
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I570f7de90007b67d811d158ca33e099d5cc2d5d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62308
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and
the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO
region which is 0xfed00000 on all chipsets and SoCs in the coreboot
tree. Since these two different constants are used in different places
that however might end up used in the same coreboot build, drop the
Kconfig option and use the definition from arch/x86 instead. Since it's
no longer needed to check for a mismatch of those two constants, the
corresponding checks are dropped too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie92bd54b072d545944b3d0251e9727ce493bb864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000,
so define this once in arch/x86 and include this wherever needed. The
old AMD AGESA code in vendorcode that has its own definition is left
unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common
definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I875916488a99af768d087691549a93f6fd5169ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow configuring the limited fields that FSP-S provides.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I56c37338eaa978fdb2c63807331493e8aecbdf60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The 'fadt->header.revision' is already done at src/acpi/acpi.c acpi_create_fadt().
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ib9b6dc7e86ca17e0b2d374ee2c3bdf06f8b82dfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62222
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Get rid of Kconfig symbol introduced at commit 5d31dfa8
High Definition Audio Specification Revision 1.0a says, there
are 15 SDIWAKE bits.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ib8b656daca52e21cb0c7120b208a2acdd88625e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62202
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3cd66f6b735f7430abcdba8a9323d5ee1320fd4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
const void is not a proper return type for a function. It's the
function pointer themselves that need to be const.
This fixes building with clang.
Change-Id: I99888ab9d9d80f1d6edb33b9f4a3f556f211a6e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I54c40434f44621c4ea6564ac9c87c5b2fa083b5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds `pmc_mmio_regs` a public function for other IA common
code may need to get access to this function.
BUG=none
TEST=none
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I67a0f7fdcd0827172426bc938569a5022eff16f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch selects SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE config to
reflect the SoC actual behaviour where PMC PCI device is still
visible over bus even after FSP-S exit.
Additionally, add DNV PMC PCI ID into PMC IA-common code.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iaaea20e54c909800e4d75b58c29507fc1944cfba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
1. Add eMMC device function in pci_devs.h.
2. Enable eMMC device and configuration based on dev enabled.
3. Add SOC acpi name for eMMC.
Change-Id: I44f17420f7a2a1ca0fbb6cfb1886b1617c5a5064
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Alder Lake N SOC has eMMC device. Add ACPI ASL methods for it.
Change-Id: I53f04e81584493049d37b46e078d394d3c8a2f09
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patch creates alias for GEN_PMCON_A to maintain parity with other
IA SoC PMC register definitions.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id9a23c58a325cb544c50cbda432fe3117eea22fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
Added `MS4V` macro for GEN_PMCON_A bit 18 as per EDS doc:558579.
Additionally, removed `PMC_` prefix from PMC configuration register
macros GEN_PMCON_A/B and ETR3.
Moved PMC PCI device macro from pmc.h to pci_devs.h and name PCH_PMC_DEV
to PCH_DEV_PMC. Also, adjust PCI macros under B0:D31:Fx based on
function numbers.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2690ccd387b40c0d89cf133117fd91914e1b71a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Alder Lake SoC deselects Kconfigs as below:
- USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
- USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
to skip FSP notify APIs (Ready to boot and End of Firmware) and make
use of native coreboot driver to perform SoC recommended operations
prior booting to payload/OS.
Additionally, created a helper function `heci_finalize()` to keep HECI
related operations separated for easy guarding again config.
TODO: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects required configs.
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0198c9568de0e74053775682a44324405746389a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs i.e. Ready to Boot and End Of Firmware.
BUG=b:211954778
TEST=Able to build brya with these changes and coreboot log with this
code change as below when ADL SoC selects all required configs:
BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms
coreboot skipped calling FSP notify phase: 00000040.
coreboot skipped calling FSP notify phase: 000000f0.
BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
HECI: CSE device 16.1 is disabled
HECI: CSE device 16.4 is disabled
HECI: CSE device 16.5 is disabled
BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I70bde33f77026e8be165ff082defe3cab6686ec7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Spaces before tabs are not allowed.
Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake has CNVI device. Select SOC_INTEL_COMMON_BLOCK_CNVI
for Alder Lake.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I6bf2292e870c990deb63fbf6e841ae7c5c63b3a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1]
moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig,
but in doing so inadvertently disabled HECI1 for Puff-based boards which
previously had HECI1 enabled by default. To correct this, move the Kconfig
selection back into the mainboard Kconfig, and set defaults to match values
prior to refactoring in 805956bce.
Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and
ensure Disable HECI1 option defaults to selected for all except Puff.
Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Commit d6dbd933 [soc/intel/cannonlake: Use SBI msg to disable HECI1]
switched CNL-based mainboards from using FSP for HECI disablement to SBI
msg, but this causes google/hatch to hang when attempting to unhide p2sb
as part of disabling HECI1 via SBI during SMM, so switch to using
PMC/IPC method. SOC_INTEL_WHISKEYLAKE and SOC_INTEL_COFFEELAKE do not
support PMC disablement method, so they remain using SBI.
Test: build/boot google/hatch, verify HECI1 disabled via console log and
lspci in booted OS.
Change-Id: I06f0eb312b579af4a0fe826403374dcd99689d21
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move cse_disable_mei_devices() from cse_eop.c into heci_disable.c,
so that platforms needing to use heci1_disable_using_pmc() can do so
without requiring cse_eop.c be unnecessarily compiled in as well.
This will allow Cannon Lake platforms to use PMC to disable HECI1 instead
of SBI, which is currently causing a hang on google/hatch (and will be
changed in a follow-on patch).
Test: build test google/{ampton,drobit,eve,akemi} boards to ensure no breakage.
Change-Id: Iee6aff570aa4465ced6ffe2968412bcbb5ff3a8d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The address space allotted to MCRS in the northbridge needs to be exclusive
of the address space allotted to the GPIO controllers in the southbridge,
otherwise Windows complains of overlapping resource ranges and disables
the GPIO controllers. To prevent overlap, use CONFIG_PCR_BASE_ADDRESS
to set the upper bound of MCRS rather than MMCONF.
Test: boot Windows 10/11 on google/{reef,ampton} and verify that
GPIO controllers are indicated as without fault in Device Manager.
Change-Id: I2117054edb448e717b7cbe80958c9c4e6c996e2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
|
|
This patch creates a global function `cse_send_end_of_post()` so
that IA common code may get access to this function for sending EOP
command to the HECI1/CSE device.
Additionally, use static variable to track and prevent sending EOP
command more than once in boot flow.
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I837c5723eca766d21b191b98e39eb52889498bfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware.
Additionally, move the PMCON status bit clear operation to `.final` ops
to cover any such chances where FSP-S Notify Phase or any other later
boot stage may request a global reset and PMCON status bit remains set.
BUG=b:211954778
TEST=Able to build brya with these changes.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I22650f539a1646f93f2c6494cbf54b8ca785d6ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I982f669b13f25d1d0e6dfaec2fbf50d3200f74fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
Additionally, move the PMCON status bit clear operation to finalize.c
to cover any such chances where FSP-S NotifyPhase requested a global
reset and PMCON status bit remains set.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie786e6ba2daf88accb5d70be33de0abe593f8c53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
According to the Datasheet Volume 1 (doc #636112, [1]) the PCR port ID
for eSPI is 0x72 (see chapter 25.2.2). Fix it in the header file.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/636112?explicitVersion=true
Test=Read and modify PCR registers of eSPI controller.
Change-Id: I5b07ef0f3a285f981791b1f4b4cdbda98ccf05ad
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61841
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix always-true conditions to properly test whether a bit is set.
Change-Id: Ibfeafe222c0c2b39ced5b77f79ceb0c679a471b5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 9a7fbbc98e8610a0a5314470edd8d5dafe676a06.
SkipMbpHob UPD skips generation of MBP Hob within FSP. Skipping MBP
Hob generation also skips syncing correct version of chipset
data with CSE since FSP uses version information from MBP HOB.
In absence of MBP Hob, FSP is unable to get version information and
hence chipset data sync is skipped.
This creates an issue while platform tries to enter deeper sleep
states.
BUG=b:215448362
BRANCH=None
TEST= FSP can get version information from MBP HOB and chipset sync
is performed. It has been Verified using FSP debug logs on Brya
board.
Change-Id: I9a160fee72b61ae9eecababf9a16900e6bd4acff
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This allows the one 32bit register to be configured in the
devicetree in the same way that Skylake can be.
i.e. register "lpc_ioe".
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I598baca0f31b5350a4e6fdb7b7356fa6fb2d71ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Boards based on google/puff baseboard (hatch variant) use CSE LITE,
which utilizes RO and RW firmware. If the CSE does not switch to the
RW firmware, the HECI1 interface is disabled, and dependent drivers
(like SOF audio firmware) fail to load. Use the same logic as other
platforms utilizing CSE LITE (eg, TGL/JSL) to check if an ME RW
firmware update is available, and if not jump to the onboard RW
firmware.
Test: built/boot Manjaro 21.x on google/wyvern, verify CSE RW firmware
loaded via cbmem console, HECI1 interface is present vis lspci, and
the SOF DSP firmware is correctly loaded via dmesg.
Change-Id: I0ae21adde4a64bbcc5fa4fb144436a0430e92280
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
create SOC_INTEL_GFX_MEMBASE_OFFSET for platform to map graphic memory
base if required, because it may vary by platfrom.
BUG=b:216756721
TEST= Check default offset for existing platform and
update platform specific offset in Kconfig under SoC directory.
Change-Id: I6b1e34ada9b895dabcdc8116d2470e8831ed0a9e
Signed-off-by: Ethan Tsao <ethan.tsao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61389
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes SKIP_CSE_RBP=y default for Apollo Lake if Boot Device is
memory mapped and ensures SkipCseRbp UPD is guarded against this config.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifd01a25443e2582a90529e55be8d34a88342a103
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Few of the Alder Lake-N Device IDs according to EDS, are named as ADL_M
IDs in the current code. Hence rename those device IDs as ADL_M_N and
use them for Alder Lake-N platform.
Document Number: 619501, 645548
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I6042017c6189cbc3ca9dce0e50acfb68ea4003f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
There may be occasions where an I2C device was initialized during
"early initialization," but when used again in ENV_PAYLOAD_LOADER
before resource allocation happens, it would currently return that it
has not been assigned a BAR. However, because of the early BAR
assigned to it, it should still be valid to use that until proper
resources have been assigned, therefore return any BAR that may have
been assigned to the device during early initialization.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I8ab599199592a72ae96cd9f95accfaa0d84e66b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add Alder Lake and Tiger Lake specific Crash Log and PMC SRAM device
IDs.
Document Number: 619501, 645548
Change-Id: I64b58b8c345bd54774c4dab7b65258714cd8dc9e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The headers added are generated as per Alder Lake N FSP v2503_00.
Changes include:
- Add all header files for Alder Lake N FSP.
- List of header files: FirmwareVersionInfoHob.h, FspmUpd.h, FspsUpd.h,
FspUpd.h, MemInfoHob.h
- Select FSP_HEADER_PATH
BUG=b:213828776
BRANCH=None
Change-Id: I97afa6d47cc825703a8dc82216250bfc5e09dc9b
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add PAD_NC_LOCK and PAD_CFG_GPI_SCI_LOCK macro to support mainboard
to lock NC and GPI_SCI pins as applicable.
BUG=b:216583542
TEST=build passed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ie44d72f4152b55183d900228df3e3670358f7518
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61655
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch defines USB2_PORT_MAX_TYPE_C macro to allow mark the type_c
flag.The USB2_PORT_MAX_TYPE_C macro modifies the USB2 configuration to
indicate the port mapped to Type-C and sets Max TX and Pre-emp
settings. This is an extension to existing macro USB2_PORT_MAX.
The change is required to enable port reset event on a USB2 port.
This event is passed to USB3 upstream ports to upgrade back to super
speed (USB3) after a downgrade during low power state.
BUG=b:193287279
TEST=Build the code for Gimble board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I464f139d8e367907191c04f9170ac53d327776ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61623
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements `cse_control_global_reset_lock()` as per ME BWG
(doc: 627331) recommendation.
It is recommended that BIOS should set this bit early on in the boot
sequence, and then clear it and set the CF9LOCK bit prior to loading
the OS in both an Intel CSME Enabled and a Intel CSME Disabled system.
Note: For CSE-Lite SKUs BIOS should set CF9LOCK bit unconditionally.
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3894b2cd8b90dc033f475384486815ab2fadf381
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: I7697512a63b58ca7d7200c74a409822389db0762
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
- Optional feature to provide mechanism to skip _OFF and _On execution.
- It is used for the device to skip _OFF and _ON during device driver
reload.
- OFSK is used to skip _OFF Method at the end of device driver removal.
- ONSK is used to skip _ON Method at the beginning of driver loading.
- General flow use case:
1. Device driver is removed by 'rmmod' command.
2. Device _RST is called. _RST perform reset.
3. Device increments OFSK in _RST to skip the following _OFF invoked by
OSPM.
4. OSPM invokes _OFF at the end of driver removal.
5. _OFF sees OFSK and skips current execution and decrements OFSK so that
_OFF will be executed normally next time.
6. _OFF increments ONSK to skip the following _ON invoked by OSPM.
7. Device driver is reloaded by 'insmod/modprobe' command.
8. OSPM invokes _ON at the beginning of driver loading.
9. _ON sees ONSK and skip current execution and decrements ONSK so that
_ON will be executed normally next time.
- In normal case:
When suspend, OSPM invokes _OFF. Since OFSK is zero, the device goes
to deeper state as expected.
When resume, OSPM invokes _ON. Sinc ONSK is zero, the device goes
to active state as expected.
- Generated changes:
PowerResource (RTD3, 0x00, 0x0000)
Name (ONSK, Zero)
Name (OFSK, Zero)
...
Method (_ON, 0, Serialized) // _ON_: Power On
{
If ((ONSK == Zero))
{
...
}
Else
{
ONSK--
}
}
Method (_OFF, 0, Serialized) // _OFF: Power Off
{
If ((OFSK == Zero))
{
...
}
Else
{
OFSK--
ONSK++
}
}
Test:
Enable and verify OFSK and ONSK Name objects and the if-condition logic
inside _OFF and _ON methods is added.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ic32d151d65107bfc220258c383a575e40a496b6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add L23 enter/exit, modPHY power gate, and source clock control methods.
DL23: method for L2/L3 entry.
L23D: method for L2/L3 exit.
PSD0: method for modPHY power gate.
SRCK: method for enabling/disable source clock.
These optional methods are to be used in the device ACPI to construct
flows with root port's power management functions.
Test:
Enable and verify DL23, L23D, PSD0, SRCK methods in ssdt.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I79de76f26c8424b036cb7d2719df68937599ca2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
