summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2023-08-26soc/intel/common/block/oc_wdt: Add OC watchdog common blockMichał Żygowski
Add new block for handling overclocking watchdog. The watchdog is present since Skylake or maybe even earlier so it is safe to use with most of the microarchitectures utilizing intelblocks. The patch adds the common block for initializing and feeding the watchdog. Timeout is defined statically in Kconfig and should be set high enough by the board or SoC Kconfig to let the board boot with full memory training and avoid reset loops. Full training of 128GB DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs with newer memory technologies and higher RAM capacity may take more. The default has been set to 10 minutes. The patch also adds support for feeding watchdog in driverless mode, i.e. it utilizies periodic SMI to reload the timeout value and restart the watchdog timer. This is optional and selectable by Kconfig option as well. If the option is not enabled, payload and/or software must ensure to keep feeding the watchdog, otherwise the platform will reset. TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets after some time. Enable the watchdog in driverless mode and see the platform no longer resets and periodic SMI keeps feeding the watchdog. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26soc/intel/meteorlake: Add PMC GPIO GPE group mappingCliff Huang
Add two missing mapping for GPIO GPE routes Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I3f0d13cf7c07201856e934f22efc4cc8c4ea5bf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77423 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-25soc/intel/apollolake: Correct the logic for the legacy 8254 timerSean Rhodes
The `use_8254` should be flipped, the same as the other Intel SOCs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2d6c859c0910b796d2ae5874a560ff9974578106 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-08-24soc/intel/metorlake: Fix PMC GPIO group assignmentCliff Huang
Those values need to match with the ones defined in PMC PWRM GPIO CFG register. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I8e84df83caab794e2fe7186e89e78343c2b55fd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-24soc/intel/apollolake: Move the PMC definitions to pmc.h fileMichał Żygowski
Add a pmc.h file, which is needed for OC watchdog compilation. The PMC definitions from pm.h are moved to pmc.h. TEST=Build UP Squared and Intel GLKRVP sucessfully. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I2726aaae1ce60d15a3944dadcf793def2dcb3a1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/69900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-08-24soc/intel/jasperlake: Use boolean type where applicableMichael Strosche
Change-Id: If3c2e5bd9ee7e0f77d0c39ffe2ca9ad17b77d9bd Signed-off-by: Michael Strosche <michael.strosche@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-23soc/intel/xeon/spr: Improve RMT configurationNaresh Solanki
Set EnforceDdrMemoryFreqPor to 0 for RMT builds. This is needed for proper functioning when EnforcePopulationPor is set to 1. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: Icf4fe01ac9b546830334717dbfa53782d2a85ba1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-21soc: Remove SOC_SPECIFIC_OPTIONSElyes Haouas
Move specific options under the boolean and remove dummy SOC_SPECIFIC_OPTIONS. Change-Id: I6ae52ceb61489e5a050a60d1fbbf4250960407eb Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-21soc/intel/alderlake: add GPIO definitions for RPL PCHTim Crawford
The RPL PCH uses a different ACPI Device ID than ADL PCH. Ref: Intel 700 Series Chipset Family PCH Datasheet, Volume 1 (#743835) Change-Id: I03f47a43ff985213ad617e834db7f974f687d877 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-21vc/intel/fsp2_0: Add a copy of ADL-S IOT FSP MemInfoHob.h for RPL-S IOTMichał Żygowski
Similar situation happened last year when IoT FSP for ADL-S came out before the Client FSP variant: https://github.com/intel/FSP/issues/83 It seems IoT FSP publishes the MemInfoHob.h file much later due to legal reasons. Hack the missing file to get the builds using RPL-S IoT FSP from repo working properly. This change could be merged, subject for later revert (when the header file is published). Change-Id: Iec35db4573a3c3d011e4c1edf1c82a5c34438695 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-21soc/intel/alderlake: Guard PchPcie{Clock,Power}Gating on RPL FSPMichał Żygowski
PchPcieClockGating and PchPciePowerGating UPDs are not yet available in RPL-S IOT FSP. It also looks like those UPDs are not generally available in all public RaptorLake FSP headers yet, so guard it against SOC_INTEL_RAPTORLAKE to avoid build errors. Change-Id: Iedac21bafa3428957e054fc8fefa38f9f776772d Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77337 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-08-21soc/intel/broadwell/pch/Kconfig: Remove dummy PCH_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I21db0474157ba20cdf3eaef086aaf29fde29d6c5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76701 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-21soc/intel/apollolake/chip.h: Use boolean type where applicableMichael Strosche
Change-Id: I6f2dc0fcc4392f77b8011221c0cf22af5da45172 Signed-off-by: Michael Strosche <michael.strosche@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-21meteorlake/include/soc/iomap: Remove unused HPET_BASE_ADDRESSElyes Haouas
Remove unused HPET_BASE_ADDRESS. It is already defined at <arch/hpet.h>. Change-Id: I8c517283e56915873b8e1798571642fd9d8a5764 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-20soc/intel/bdw/pch: Remove SOC_INTEL_BROADWELL conditionalElyes Haouas
broadwell/pch/Kconfig is sourced if SOC_INTEL_BROADWELL is true. So remove 'if SOC_INTEL_BROADWELL' condition and duplicated 'INTEL_LYNXPOINT_LP' Change-Id: I9b5676fd232b47e9d5f89f7faffdfd5d2c76984e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76699 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-20soc/intel/mtl: Enable IOE_PMC supportDinesh Gehlot
IOE_PMC support was not enabled on Meteor Lake platforms. This patch adds the bare minimum hooks to initialize and allocate a memory region for IOE operations. Additionally, this patch moves those IOE operations to a newly included IOE-specific file, Previously, PMC was responsible for these operations. BUG=b:287419766 TEST=build and verified on google/rex. Change-Id: I8bbc0b8a3e32dad5404c80bc7717ef07e3ec60b9 Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77261 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-20soc/intel/alderlake_n: Allow using the microcode repoFelix Singer
Allow users of Alderlake N processors to use the microcode repository and also add their related microcode blob to the list of microcodes which should be included in the coreboot rom. Change-Id: I11c9cb13fa81118bfcb819bad5fb39731c7e3e76 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-08-18soc/intel/meteorlake: Implement `soc_is_ish_partition_enabled` overrideSubrata Banik
This patch implements `soc_is_ish_partition_enabled()` override to uniquely identify the SKU type between ISH and non-ISH to conclude if ISH partition is enabled and need to retrieve the ISH version from CSE FPT by sending a HECI command. BUG=b:285405031    TEST=Able to uniquely identify the ISH SKUs while booting     to google/rex_ec_ish to dump the ISH version. Change-Id: I48358ad9e2e582e8b2274cbf4655de01f8792e6c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77177 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18{driver, soc/intel/cmn/cse}: Refactor ISH FW Version implementationSubrata Banik
This patch uses the CSE firmware specific data to store Intel ISH firmware related information. Sending an ISH partition version information command on every boot cycle would impact the overall boot performance. This information is used by the auto-test framework to ensure the ISH firmware update is proper for in-field devices. BUG=b:285405031 TEST=Able to build and boot google/rex. Verified ISH FW version is getting displayed across warm resets without impacting the boot time. Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-08-18soc/intel/cmn/cse: Display CSE RW FW version by default for LITE SKUSubrata Banik
This patch selects SOC_INTEL_STORE_CSE_FW_VERSION config by default for CSE LITE SKU. It helps to dump the CSE RW firmware version which further consumed by auto-test infrastructure to ensure CSE RW firmware update is successful. BUG=b:285405031 TEST=Able to build and boot google/rex. Verified CSE RW FW version (for LITE SKU) is getting displayed without impacting the boot time. Change-Id: Iba5903c73c0a45b01e6473714e0d5f759c061825 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77175 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-18soc/intel/cmn/cse: Refactor CSE RW FW Version implementationSubrata Banik
This patch introduces a CSE firmware specific data in order to store Intel CSE and associated firmware related information which requires a sync between Pre-RAM and Post-RAM phase. This information will be used further to retrieve currently running CSE RW firmware instead of fetching the version information by sending a HECI cmd (which consumes 7ms-15ms depending upon the CSE operational state). Current implementation attempts to simply the CSE RW FW version store and retrieval operations as below * CSE sync in romstage (aka Pre-RAM) - Relying on .bss segment to store the CSE info data in absence of real physical memory and sync back into the CBMEM once available (after FSP-M exits). * CSE sync in ramstage (aka Post-RAM) - Directly stored the CSE RW version into the CBMEM (as CBMEM is online). BUG=b:285405031 TEST=Able to build and boot google/rex. Verified CSE RW FW version (for LITE SKU) is getting displayed without impacting the boot time. w/o this patch: 10:start of ramstage         722,257 (43) 17:starting LZ4 decompress (ignore for x86)  723,777 (1,520) w/ this patch: 10:start of ramstage                         722,257 (43) 17:starting LZ4 decompress (ignore for x86)  723,777 (1,520) Change-Id: Ia873af512851a682cf1fac0e128d842562a316ab Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77174 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2023-08-17soc/intel/alderlake: Set PchHdaSdiEnable for Alder LakeSean Rhodes
This UPD does exist for Alder Lake, so set it there also. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If2f405804ab675aaf6dbf8b12d149566055b9eef Reviewed-on: https://review.coreboot.org/c/coreboot/+/77125 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-17soc/intel/alderlake: Add provision to show pre-boot splash screenSubrata Banik
This patch adds the ability to show a pre-boot splash screen on Meteor Lake systems using FSP-S. The patch calls into `fsp_convert_bmp_to_gop_blt()` when the `BMP_LOGO` config is enabled. This function converts a BMP file to a BLT buffer, which is then used by FSP-S to render the splash screen. Additionally, increase the heap size (malloc'able size) upto 512KB (when BMP_LOGO config is enabled) to accommodate high resolution logo file. BUG=b:284799726 TEST=Able to see splash screen while booting google/marasov with BMP_LOGO config enable. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9f4d1bc0aa991e784624ca19ba96a259ab8ddfa6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-17soc/intel/meteorlake: Enable LZ4 compression for logo CBFS fileSubrata Banik
This patch selects LZ4 decompression for logo CBFS file. Able to save 2ms of the boot time when HAVE_FSP_LOGO_SUPPORT config is enabled. However, the compressed BMP logo size is increased by ~2KB. Raw BMP Image size is ~97KB. BUG=b:284799726 TEST=Able to see pre-boot splash screen while booting google/rex with 32MB (W25Q256JWEIM) SPI-Flash. w/o this patch: sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A FMAP REGION: FW_MAIN_A Name Offset Type Size Comp ... ... logo.bmp 0x167480 raw 6172 LZMA (97078 decompressed) ... 15:starting LZMA decompress (ignore for x86)  849,090 (1,022) 16:finished LZMA decompress (ignore for x86)  851,207 (2,116) w/ this patch: sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A FMAP REGION: FW_MAIN_A Name Offset Type Size Comp ... ... logo.bmp 0x167480 raw 8568 LZ4 (97078 decompressed) ... 17:starting LZ4 decompress (ignore for x86)   849,419 (1,279) 18:finished LZ4 decompress (ignore for x86)   849,559 (140) Change-Id: I856c39146a5ec0faf44c1cd37fa7c0d7296bf673 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-17soc/intel: Update all references to ESE as ISSEUsha P
Intel has rebranded ESE as ISSE (Intel Silicon Security Engine),so all references to ESE is updated to ISSE in the current coreboot code. BUG=None TEST=Build all the variants based on Intel Meteor Lake SoC Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I1f8785704706d56a35e94a0f3386bc551cd1f263 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77241 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-16soc/intel/alderlake/chip.h: Use boolean type where applicableMichael Strosche
Change-Id: If26184058536590b70bbb03209913118307ff6c5 Signed-off-by: Michael Strosche <michael.strosche@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76830 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-16ACPI: Add usb_charge_mode_from_gnvs()Kyösti Mälkki
Early Chromebook generations stored the information about USB port power control for S3/S5 sleepstates in GNVS, although the configuration is static. Reduce code duplication and react to ACPI S4 as if it was ACPI S5 request. Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-08-16vendorcode/fsp: Rename GLK to Gemini Lake to match other SOCsSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic559b78e6444acec36d437fe3c139b692a3f4d0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/77126 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-08-13soc/intel/cse: Add config to enable PSR data backup for CSE Lite SKUKrishna Prasad Bhat
Intel Platform Service Record (PSR) provides on-platform persistent and tamper resistant ledgers and counters. Key events captured within the Intel PSR Event Ledger, e.g., Chassis Intrusion Detection, can be observed over the life cycle of the platform to help assess confidence. Counters for platform S0 operational use and power state transitions can be assessed to aid in the determination of general wear or correlations of other platform events when determining platform decommission plans (repurpose, resell, recycle). PSR data is created and stored in CSE data partition. In platforms that employ CSE Lite SKU firmware, a firmware downgrade involves clearing of CSE data partition which results in PSR data being lost. CSE Lite SKU firmware supports a command to backup PSR data before initiating a firmware downgrade. Add a config to support this PSR data backup flow. BRANCH=None BUG=b:273207144 Change-Id: Iad1ce2906177081c103ef4d4bcef78fa2c95026f Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-08-12soc/intel/xeon_sp/*/Kconfig: Refactor out and remove SOC_SPECIFIC_OPTIONSElyes Haouas
Move specific selections to {cpx,skx,spr} and remove dummy SOC_SPECIFIC_OPTIONS Change-Id: I71e41deb0478bf4d04395c88fc7b68df1ea83ac0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-11soc/intel/braswell: Adjust status of IOSF ACPI objectMatt DeVillier
Neither Windows nor mainline Linux make use of IOSF on the Braswell platform, so adjust the ACPI status return value based on CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows device manager. TEST=build/boot Win11, Linux 6.2 on google/edgar Change-Id: Ic51624ffd816d48c007c13d510601cf8cbf1edc4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-08-11soc/intel/baytrail: Adjust status of IOSF ACPI objectMatt DeVillier
Neither Windows nor mainline Linux make use of IOSF on the Baytrail platform, so adjust the ACPI status return value based on CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows device manager. TEST=build/boot Win11, Linux 6.2 on google/swanky Change-Id: I249028c57cc704955cf5a11e2088780ef58e16cf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77141 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-11soc/intel/alderlake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I83574032ef506a411571e8363f476f322ac13e5e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76686 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-11soc/intel/meteorlake: Add provision to show pre-boot splash screenSubrata Banik
This patch adds the ability to show a pre-boot splash screen on Meteor Lake systems using FSP-S. The patch calls into `fsp_convert_bmp_to_gop_blt()` when the `BMP_LOGO` config is enabled. This function converts a BMP file to a BLT buffer, which is then used by FSP-S to render the splash screen. Additionally, increase the heap size (malloc'able size) upto 512KB (when BMP_LOGO config is enabled) to accommodate high resolution logo file. BUG=b:284799726 TEST=Able to see pre-boot splash screen while booting google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-08-11soc/intel/alderlake: Disable PCIe clock gatingPatrick Rudolph
Intel requires that all enabled PCIe PCH ports have a CLK_REQ signal connected. The CLK_REQ is used to wake the silicon when link entered L1 link-state. L1 link-state is also entered on PCI-PM D3, even with ASPM L1 disabled. When no CLK_REQ signal is used, for example when it's using a free running clock the silicon will never wake from L1 link state. This will trigger a MCE. Starting with FSP MR4 the UPD 'PchPcieClockGating' allows to work around this issue by disabling ClockGating. Disabling ClockGating should be avoided as the silicon draws more power when it is idle. TEST: Verified on two boards, one with missing CLK_REQ on a PCH root port, that the code does the right decision to disable UPD PchPcieClockGating and PchPciePowerGating when necessary. Change-Id: I673bbdbadc9afbed6a7bd5ce9f35dc70716d875b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-08-10soc/intel/jasperlake: Add configs for USB 3.1 Gen2 EV settingsChia-Ling Hou
Add configs for USB 3.1 Gen2 electrical validation (EV) settings so that people can set the EV settings per board in device tree. BUG=b:285811345 TEST=build coreboot and fsp with enabled fw_debug. Flashed to taranza and checked the log. All usb configs were set correctly. Change-Id: Iecd12d3db76b63ad99887dee5991d94d47f138fd Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76246 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-08-09treewide: Get rid of "NO_DDRx" selectionElyes Haouas
Change-Id: I8fa26e7a398eee855c31a76f0f89b4111368c2a6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-09soc/intel/baytrail: Specify supported memory typeElyes Haouas
Change-Id: Ie360ca3640a4774e3baec36468a69f76fcd1217b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-09Revert "soc/intel/{adl, cmn/pcie}: Fix ASPM configuration enum definitions"Jeremy Soller
This reverts commit 5dfec718290609dc0fd0331070ad703107e0b7e7. Reason for revert: This change made it impossible to disable ASPM by FSP parameter. ASPM_DISABLE would result in the FSP parameter not being programmed, causing it to be the FSP default value instead. This additionally fixes MTL to match ADL. Change-Id: I60c0ea08513fcb0035449ea3fef1681de528c545 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75280 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-09soc/intel/xeon_sp/spr: Add soc_config_iio to set IIO UPD from mainboardJohnny Lin
To deduplicate mainboard mainboard_config_iio since there are a few SPR-SP mainboards now. The flow would be soc function initialize_iio_upd initializes the table with the default values which are mostly zero, then mainboard can overwrite it by soc_config_iio. Change-Id: I72d74241fcad4c85a95f6d14587418f544caadd9 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76185 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-09soc/intel/xeon_sp/ebg: Add periodic SMI bits definitionMichał Żygowski
Change-Id: Ia906a115538964628958bb4b6e3de3aa71577cce Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76252 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-08ACPI: Add helper fill_fadt_extended_pm_io()Kyösti Mälkki
Once platform code has filled in the (legacy) ACPI PM register map, added function will fill in the extended entries in FADT. TEST=samsung/lumpy and amd/mandolin FADT stays unchanged. Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-06device, soc: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the device and soc directories that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I89c05c7c1c39424de2e3547c10661c7e3f58b8f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2023-08-06soc/intel/common/tcss: Configure USB-C ports with attached devicesCoolStar
Inspect all type-C USB ports, check if there is a USB device attached, and if so, send the connection request to the PMC. This allows for any attached USB2/USB3 devices to be used for booting by the payload. Since this functionality is only needed by ChromeOS devices with TCSS running upstream coreboot, introduce a new Kconfig to guard its use. Boards needing it will select it in subsequent commits. TEST=tested with rest of patch train Change-Id: I69522dbcc8cae6bbf41659ae653107d0e031c812 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72909 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-06soc/intel/common/block/tcss: Fix printk formattingMatt DeVillier
Variable 'i' is unsigned, so use %zu vs %zd. Change-Id: I5f5b28796b30285e81a94c37e686a9e763cab204 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76943 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-05src/*/post_code.h: Change post code prefix to POSTCODEYuchen He
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. header="src/soc/amd/common/block/include/amdblocks/post_codes.h \ src/include/cpu/intel/post_codes.h \ src/soc/intel/common/block/include/intelblocks/post_codes.h" array=`grep -r "#define POST_" $header | \ tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2` for str in $array; do splitstr=`echo $str | cut -d '_' -f2-` grep -r $str src | cut -d ':' -f 1 | \ xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g" done Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad Signed-off-by: Yuchen He <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-04soc/intel/meteorlake: Hook up UPD for C1 C-state auto-demotionSukumar Ghorai
FSP has a parameter to enable/disable c1-state autodemotion feature. Boards/Baseboard can choose to use this feature as per requirement. This patch hooks up this parameter to devicetree. BUG=b:286328295 TEST=Check code compiles & boot google/rex, and correct value has been passed to FSP. Change-Id: I2cc60bd297271fcb3000c0298af71208e3be60fc Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76826 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-08-04soc/intel/mtl: Change default for debug consent from 3 to 6Kane Chen
USB DBC is very helpful for SoC debug. TraceHub needs to be enabled in coreboot if debug consent == 2 or 4. Debug consent == 6 enables USB DBC without TraceHub enabled. This patch updates the Kconfig help text to meet PlatformDebugOption in MTL and changes debug consent to 6 in default to provide basic SoC debug capability. TEST=Boot to OS on screebo and DBC connection is OK. Change-Id: Ic12528bdd8b1feda7f1b65045c863341f932d3a2 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76880 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-04soc/intel/common: Return CB_ERR when cse_data_clear_request() failsKrishna Prasad Bhat
cse_prep_for_rw_update() should return CB_ERR when cse_data_clear_request fails. It was modified to CB_SUCCESS in this commit ad6d3128f87c ("soc/intel/common: Use enum cb_err values") BRANCH=None BUG=None TEST=Verify the system goes to recovery during downgrade when cse_data_clear_request() fails. Change-Id: Ibbccb827765afa54e5ab1b386fa46093b803977a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-04soc/intel/meteorlake: Generate new TME key on each warm bootPratikkumar Prajapati
Enable config TME_KEY_REGENERATION_ON_WARM_BOOT for Intel Meteor Lake SOCs. This config allows Intel FSP to programs TME engine to generate a new key for each warm boot and exclude CBMEM region from being encrypted by TME. Bug=b:276120526 TEST= Boot up the system, generate kernel crash using following commands: $ echo 1 > /proc/sys/kernel/sysrq $ echo "c" > /proc/sysrq-trigger System performs warm boot automatically. Once it is booted, execute following commands in linux console of the DUT and confirm ramoops can be read. $ cat /sys/fs/pstore/console-ramoops-0 S0ix also tested and found working. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I3161ab99b83fb7765646be31978942f271ba1f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-03soc/intel/common/block/cse/Kconfig: Remove unused symbolsElyes Haouas
Change-Id: I35742721e049102a3e153b857824073a5d257cc3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76693 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/xeon_sp/spr/Kconfig: Remove unused MAX_MC_CHNElyes Haouas
Change-Id: Ia4011a0f29d360fbe46a5e052e2acb3d23d8ceaf Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76695 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/jasperlake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I5ad1a1bf51bb7a451239252f01a90c1d4d94ba49 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76685 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/skylake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: Iea0e55c6c55635976dad0422470f3927bdc26e35 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-03soc/intel/tigerlake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: Id268943b9347fdb54e07b55c0a2a18ac77bb3a58 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-03soc/intel/xeon_sp/Kconfig: Remove useless USE_FSP2_0_DRIVERElyes Haouas
Change-Id: Ic384ee804e217ba79f7e191f122ec61565abfc40 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-03soc/intel/xeon_sp/spr/Kconfig: Remove unused SIPI_FINAL_TIMEOUTElyes Haouas
Change-Id: I915e0e942adf33175fdc9fe055fce013824d6c0f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76698 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/broadwell/Kconfig: Remove dummy SOC_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I4ccb8d38f18cb440f54723cc1f29e25b82dac8ee Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76700 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/meteorlake: Set UPDs for TME exclusion range and new key genPratikkumar Prajapati
Set UPD params GenerateNewTmeKey, TmeExcludeBase, and TmeExcludeSize when TME_KEY_REGENERATION_ON_WARM_BOOT config is enabled. These UPDs are programmed only when INTEL_TME is enabled. Bug=b:276120526 TEST=Able to build REX platform. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ib8d33f470977ce8db2fd137bab9c63e325b4a32d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75626 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/common: Merge TME new key gen and exclusion range configsPratikkumar Prajapati
Merge TME_KEY_REGENERATION_ON_WARM_BOOT and TME_EXCLUDE_CBMEM_ENCRYPTION config options under new config option named TME_KEY_REGENERATION_ON_WARM_BOOT. Program Intel TME to generate a new key for each warm boot. TME always generates a new key on each cold boot. With this option enabled TME generates a new key even in warm boot. Without this option TME reuses the key for warm boot. If a new key is generated on warm boot, DRAM contents from previous warm boot will not get decrypted. This creates issue in accessing CBMEM region from previous warm boot. To mitigate the issue coreboot also programs exclusion range. Intel TME does not encrypt physical memory range set in exclusion range. Current coreboot implementation programs TME to exclude CBMEM region. When this config option is enabled, coreboot instructs Intel FSP to program TME to generate a new key on every warm boot and also exclude CBMEM region from being encrypted by TME. BUG=b:276120526 TEST=Able to build rex. Change-Id: I19d9504229adb1abff2ef394c4ca113c335099c2 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76879 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/alderlake/meminit.c: Guard CsPiStartHighinEct properlyMichał Żygowski
Build issue introduced by patch CB:76418 (commit hash 01025d3ae78e02192d389f22abd36747e3d8c63b) for Google boards. Patch has not been rebased to latest master and tested before submission causing the Jenkins jobs to fail. Change-Id: I95bd2485b98be4ab3a39eaaebb9efb34db93bbe8 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76915 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03src/soc/intel/alderlake: add SOC_INTEL_RAPTORLAKE_PCH_S symbolMichał Żygowski
Introduce new symbol SOC_INTEL_RAPTORLAKE_PCH_S that can be selected by board with RPL-S PCH. For now only the IoT variant of RPL-S FSP is available for use with 700 series chipsets. Boards with 600 series chipsets can still use RPL CPUs with the ADL-S C.0.75.10, which contains minimal RPL-S CPU support. Change-Id: I303fac78dac1ed7ccc9d531a6c3c10262f7273ee Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-03soc/intel/alderlake: Depend RPL-guarded FSP UPDs on FSP_USE_REPOMichał Żygowski
Only the headers on Intel FSP repository have the CnviWifiCore present. Options guarded for RPL like: DisableDynamicTccoldHandshake or EnableFastVmode and IccLimit is also supported by all public FSPs (except ADL-N for the handshake). Options like LowerBasicMemTestSize and DisableSagvReorder have to be guarded when FSP_USE_REPO is not selected, as publci FSPs do not have these options. Use FSP_USE_REPO instead of/in addition to SOC_INTEL_RAPTORLAKE as dependency on the guarded UPDs to make them available for FSPs that support them as well. Also prioritize the headers from FSP repo over vendorcode headers if FSP_USE_REPO is selected. Change-Id: Id5a2da463a74f4ac80dcb407a39fc45b0b6a10a8 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-08-01soc/intel/broadwell/include/soc/me.h: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I2d65e9dbefc8fa5d8288151995a587f76049c65a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-01soc/intel/common/mma: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: Id19193b960935eeffca8e8db60073321592368fe Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76836 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31soc/intel/apl: Hide PMC/IPC ACPI device from WindowsMatt DeVillier
No drivers are needed/available, so hide the device to prevent an unknown device from showing under Device Manager. Linux does not use the ACPI _STA so no effect there. Change-Id: I02efb64a845edc6e4fc559e7e99a7825abf4c2aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: CoolStar <coolstarorganization@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-07-31soc/intel/apl: program VMX per Kconfig settingMatt DeVillier
While FSP programs the VmxEnable UPD per CONFIG_ENABLE_VMX, it doesn't set the lock bit, which prevents Windows from enabling virtualization on devices which support it. Call set_vmx_and_lock() to ensure the lock bit is properly set. TEST=build/boot Win11 on google/ampton,reef; verify virtualization enabled. Change-Id: I54ea0adb0a6d10f2df18f604b1f1e5a7a145dfb3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76804 Reviewed-by: CoolStar <coolstarorganization@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-07-31soc/intel/alderlake: Allow channel 0 for DDR5 memory-downJeremy Soller
This matches the change done for DDR4 in commit 8509c25eece8 ("soc/intel/alderlake: Allow channel 0 for memory-down"). Fixes detection of the on-board RAM (Samsung M425R1GB4BB0-CQKOD) on the System76 Lemur Pro 12 (Clevo L140AU). The Clevo L140*U are the only boards in the tree using mixed memory topology. Change-Id: I395f898472a9a8f857fd6b0564b95c787b96080b Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-07-31soc/intel/common/block/pcr: Remove useless break after a returnElyes Haouas
Change-Id: Ie7f2144d0af21ba111464dfd135159704a3d82b7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76474 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31soc/intel/alderlake/hsphy.c: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: Id0baf970dbe94a8ebf75f8dbabc6abe345d1c454 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-07-30soc/intel/broadwell/pch/me.c: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: Iea63e7ce165b1c8129725136e39bff45765023e6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-25soc/intel/meteorlake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I0f9299d4b7417efac0d5fba39d40b97d6c3a1926 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-25soc/intel/xeon/spr: Improve RMT configurationNaresh Solanki
Set AllowedSocketsInParallel to 1 for RMT builds. This help in associating any failures encountered during RMT run with the corresponding Socket/MC/DIMM. Intel recommended setting EnforcePopulationPor to 1 for RMT runs for debugging failures if any. Change-Id: Ie2301368e9470cc23171c3c4eca9fe978e1513d4 Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76679 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-07-21soc/intel/alderlake: Hook up UPD PchHdaSdiEnableBora Guvendik
Hook the PchHdaSdiEnable UPD so that mainboard can change the settings via devicetree. PchHdaSdiEnable UPD enable HDA SDI lanes. BUG=b:268546941 TEST=Verified the settings on google/brya using debug FSP logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I82bbfa5442936aefa53f8826e395b7ce75c895a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-07-20soc/intel/xeon_sp: use VGA_MMIO_* defines from arch/vga.hFelix Held
Now that we have x86 architecture specific VGA_MMIO_* defines in arch/vga.h, use those instead of having SoC-specific defines for this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I77b914d563bdc83e7fad7d7fccd5cf7777cb4918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-07-20acpi: Move ECAM resource below PNP0C02 device in a common placeArthur Heymans
From the Linux documentation (Documentation/PCI/acpi-info.rst): [6] PCI Firmware 3.2, sec 4.1.2: If the operating system does not natively comprehend reserving the MMCFG region, the MMCFG region must be reserved by firmware. The address range reported in the MCFG table or by _CBA method (see Section 4.1.3) must be reserved by declaring a motherboard resource. For most systems, the motherboard resource would appear at the root of the ACPI namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and the resources in this case should not be claimed in the root PCI bus’s _CRS. The resources can optionally be returned in Int15 E820 or EFIGetMemoryMap as reserved memory but must always be reported through ACPI as a motherboard resource. So in order for the OS to use ECAM MMCONF over legacy PCI IO configuration, a PNP0C02 HID device needs to reserve this region. As no AMD platform has this defined in DSDT this fixes Linux using legacy PCI IO configuration over MMCONF. Tianocore messes with e820 table in such a way that it prevents Linux from using PCIe ECAM. This change fixes that problem. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I852e393726a1b086cf582f4d2d707e7cde05cbf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75729 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-19soc/intel/alderlake: Use 1MB CBMEM console buffer with FSP debugSubrata Banik
Patch to increase CONSOLE_CBMEM_BUFFER_SIZE to contain FSP debug serial log. The existing implementation uses larger cbmem size irrespective of FSP debug is enabled or not. Ideally. larger cbmem size is required only if FSP debug is enabled. Bug=b:284124701 TEST=Able to build and boot google/marasov. Change-Id: I9a9e660f2738813808e0dd65d2783424b49f9a5e Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-19soc/intel/{adl, mtl}: Reduce CAR usage while using FSP debug binariesSubrata Banik
Reduces the CAR (Cache-as-RAM) variable usage while using FSP debug binaries, which can prevent the CAR from becoming too full and unable to integrate other CAR global variables. This change has the following downsides: - FSP debug output into the cbmem buffer will be partial. To test this change, you can: Build and boot google/rex without any function impact with non-serial and serial FSP debug image (unless what has been documented here). Bug=b:284124701 TEST=Able to build and boot google/rex. Change-Id: I16a1aa25fd32327d03a37381a696c86c95014ba0 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/alderlake: Hook up CsPiStartHighinEct UPDKane Chen
This commit provides option for board to set CsPiStartHighinEct FSP UPD using a new cs_pi_start_high_in_ect mb_cfg field. BUG=b:279835630 BRANCH=none TEST=CsPiStartHighinEct UPD is set properly Change-Id: I7d0d5f3c782e29fb047ea421e1a5fdfc30bcc26d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-18soc/intel/xeon_sp: Skip empty socketsPatrick Rudolph
The current Sapphire Rapids code assumes that all sockets have working CPUs. On multi-socket platforms a CPU might be missing or was disabled due to an error. The variable PlatformData.numofIIO and the variable SystemStatus.numCpus reflect the working CPUs, but not the actual socket count. Update the code to iterate over sockets until PlatformData.numofIIO IIOs have been found. This is required as FSP doesn't sort IIOs by working/non working status. This resolves invalid ACPI table generation and it fixes a crash as commands were sent to a disabled CPU. TEST: Disabled Socket1 on IBM/SBP1. Change-Id: I237b6392764bbdb3b96013f577a10a4394ba9c6e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76559 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/xeon_sp: Use SocketID in NUMA table generationPatrick Rudolph
Use the actual SocketID instead of the running index. Change-Id: I9128909756d0dbb0c4dabc52acdc98cb2a4f7baa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/xeon_sp: Remove invalid commentPatrick Rudolph
The comment is only true if all sockets have working CPUs installed. Change-Id: I8c3376c9233c33fb770082573e07e9d96abb7855 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76557 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/xeon_sp: Introduce soc_cpu_is_enabledPatrick Rudolph
Add a function to check if the CPU placed at the specified socket was found usable during QPI init. This is useful for multi-socket platforms were a CPU is missing or has been disabled due to an error. Change-Id: I135968fcc905928b9bc6511e3ddbd7d12bad0096 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/xeon_sp: Print HOB for all socketsPatrick Rudolph
Use the FSP define to iterate over all sockets as the runtime value of numofIIO is the detected number of sockets, not the highest working socket. This fixes printing the HOB on multi-socket platforms where a CPU has been removed or has been disabled (4S system running as 3S). Change-Id: Ieed67cd48d26c7634636c0aae6a56f3b6fbdf640 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76492 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/meteorlake: Enable PCIE_CLOCK_CONTROL_THROUGH_P2SBKane Chen
On Intel Meteor Lake (MTL), PCIe CLK control register is accessed by P2SB on IOE/SOC die. So this patch does: 1. Enable PCIE_CLOCK_CONTROL_THROUGH_P2SB 2. Include pcie_clk.asl 3. Set the correct IOE_DIE_CLOCK_START for MTL-U/H. BUG=b:288976547, b:289461604 TEST=Test on google/screebo and found the pcie clock is on/off properly and sdcard PCIe port doesn't block S0ix with RTD3 cold enabled. Change-Id: I6788ae766f36c9a0d4910fda1d6700f20ce73ea8 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76356 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/common/acpi: Support on/off PCIe CLK by P2SBKane Chen
In the older platform such as Raptor Lake (RPL), Tiger Lake (TGL), it needs PMC IPC cmd to turn on/off the corresponding clock. Now on Meteor Lake (MTL), it control pcie clock registers on P2SB on IOE or SoC die. BUG=b:288976547, b:289461604 TEST=Test on google/screebo and found the pcie clock is on/off properly and sdcard pcie port doesn't block S0ix with RTD3 cold enabled. Change-Id: Ia729444b561daafc2dca0ed86c797eb98ce1f165 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76347 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/meteorlake: Include IOE PCR register accessSubrata Banik
This patch includes the ioe_pcr.asl file as Intel Meteor Lake has support for IOE die. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Ia534dbc0db5e54e173da9cdf475a7eb2bfda9e2f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76410 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-18soc/intel/common/acpi: Add IOE PS2B access APIsSubrata Banik
This patch implements APIs to access PCR registers from IOE die. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Ief7a00c4e81048f87ee308e659faeba3fde4c9cd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76409 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-07-18soc/intel/meteorlake: Add IOE P2SB Base AddressSubrata Banik
This patch introduces a new config named IOE_PCR_BASE_ADDRESS to define P2SB base address. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: I289358f9c53b557a397bd7186e6b7419c5d8c954 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76411 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/common/acpi: Create helper APIs for common P2SB accessSubrata Banik
This patch creates a helper library to migrate all the common P2SB access routines. The PCH P2SB ACPI implementation will now rely on the common library to perform PCR read/write operations. This will make the code more modular and easier to maintain. The helper library provides a single interface for accessing P2SB registers. This makes it easier to port the code to different platforms, for example: adding support for PS2B belongs to the IOE die for Meteor Lake SoC generation. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: I0b2e7ea416ca7082f68d0b822ebb9a87025b4a8b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76408 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-17soc/intel/adl: Add power limits for RPL-H 4P+8E 45WTim Crawford
Change-Id: I01ae5a484287d2adb1516e1e4551b185b895fdde Ref: RPL-UPH and RPL-U Refresh Platform Design Guide (#686872, rev 2.1) Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-17soc/intel/denverton: Use newer function for resource declarationsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Id092b6dd9d42f2965801b0327a857a5a4945f793 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76288 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-15soc/intel/common: Add support for AP initiated mode entryKapil Porwal
Add support for AP initiated mode entry. The code flow has been optimized as below - Code flow when AP initiated mode entry is disabled: +-------+ | Start | +---+---+ | | +---------+---------+ |wait_for_connection| | Is DP ALT mode | | available? | +---------+---------+ | +--------------->-------+ Yes| No | +---------+---------+ | |Skip enter_dp_mode | | +---------+---------+ | | | | | +-----------+----------+ | |wait_for_dp_mode_entry| | | Is DP flag set? | | +-----------+----------+ | | | +--------------->-------- Yes| No | +-----------+----------+ | | wait_for_hpd | | | Is HPD_LVL flag set? | | +-----------+----------+ | | | +--------------->-------- Yes| No | +-----------+----------+ | | Rest of the code | | +-----------+----------+ | | | +---------------<-------+ | +---+---+ | End | +-------+ Code flow when AP initiated mode entry is enabled: +-------+ | Start | +---+---+ | +------------+-----------+ |Skip wait_for_connection| +------------+-----------+ | +--------+-------+ | enter_dp_mode | | Is USB device? | +--------+-------+ | +--------------->-------+ Yes| No | +---------+---------+ | | enter_dp_mode | | | Send DP mode | | | entry command | | +---------+---------+ | | | +-----------+----------+ | |wait_for_dp_mode_entry| | | Is DP flag set? | | | (If not, loop wait | | | until timed out) | | +-----------+----------+ | | | +--------------->-------- Yes| No | +-----------+----------+ | | wait_for_hpd | | | Is HPD_LVL flag set? | | | (If not, loop wait | | | until timed out) | | +-----------+----------+ | | | +--------------->-------- Yes| No | +-----------+----------+ | | Rest of the code | | +-----------+----------+ | | | +---------------<-------+ | +---+---+ | End | +-------+ BUG=b:247670186 TEST=Verify display over TCSS and its impact on boot time for google/rex Time taken by enter_dp_mode / wait_for_dp+hpd / MultiPhaseSiInit functions with this patch train: 1. When AP Mode entry is enabled - With type-c display on C1 and SuzyQ on C0: 6.9ms / 420ms / 616ms - With USB key on C1 and SuzyQ on C0 : 6.0ms / 505ms / 666ms - Without any device on C1 and SuzyQ on C0 : 3.7ms / 0ms / 178ms 2. When AP Mode entry is disabled - With type-c display on C1 and SuzyQ on C0: 1.7ms / 2.5ms / 213ms - With USB key on C1 and SuzyQ on C0 : 0.9ms / 3.3ms / 177ms - Without any device on C1 and SuzyQ on C0 : 0.8ms / 1.8ms / 165ms Without this patch train, wait_for_hpd would cause a constant delay of WAIT_FOR_HPD_TIMEOUT_MS (i.e. 3 seconds) per type-c port when there is no device connected. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I514ccbdbaf905c49585dc00746d047554d7c7a58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-14soc/intel/cannonlake: Hook up ucode for CML-STim Crawford
Hook up microcode from 3rdparty repo for: - 06-a5-03 (CPUID signature: 0xa0653) - 06-a5-05 (CPUID signature: 0xa0655) Fixes loading microcode on system76/bonw14. Change-Id: Ie6789420926fe46fc61ea6773f02dc07dc2e9b5e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-14soc/intel/adl: Add Raptor Lake-HX definitionsTim Crawford
Tested by booting System76 Adder WS 3 (addw3) and Serval WS 13 (serw13) to edk2 payload and then OS. Ref: Intel Raptor Lake EDS, Volume 1 (#640555, rev. 2.8) Change-Id: I6098e9121a3afc4160c8a0c96d597e88095fd65d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-13soc/intel: Rename pcr.asl to pch_pcr.aslSubrata Banik
The PCR (Private Configuration Register) is applicable to access the P2SB register space starting with the Intel SkyLake generation of SoC. Prior to Intel Meteor Lake SoC generation, the only P2SB existed inside the PCH die. Starting with Meteor Lake SoC, there are two P2SB, one in SoC die (same as PCH die for U/H SoC) and another in IOE die. This patch renames pcr.asl to pch_pcr.asl to reflect the actual source of the P2SB IP in the die (i.e., SoC die or PCH die). BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Idb66293eaab01e1d4bcd4e9482157575fb0adf04 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76407 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-13soc/intel/braswell: Use newer function for resource declarationsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4769f79c67c372e11bb267de3acec0920d7ab0d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-07-13soc/intel/baytrail: Use newer function for resource declarationsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I80c8a1b58e8102ed11e22b74f30750d5a6c4eae4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76283 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-13soc/intel/alderlake: Disable hwp scalibility trackingBora Guvendik
Disable scalability tracking for autonomous frequency control in order to improve power and performance. BUG=b:280021171 TEST=Boot to OS on brya0 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: If71ee5374c67611b32691bbec4effdf828b3e566 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74723 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-07-13soc/intel/alderlake: Hook up UPD EnableHwpScalabilityTrackingBora Guvendik
Hook the newly exposed EnableHwpScalabilityTracking UPD up so that boards can configure is via devicetree. BUG=b:280021171 TEST=Verified by enabling/disabling the UPD on google/brya Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I4c8845c445d46caa30a0245386ab9cd690d2623f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74722 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>