Age | Commit message (Collapse) | Author |
|
Hook up PCIEXP_CLK_PM, PCIEXP_ASPM and PCIEXP_L1_SUBSTATE to the
option API.
This provides users an easy way to disable power saving options
that can limit performance.
Change-Id: I2b06a7c734a4fd4073e86c668742ee35e1d79956
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81906
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP-S UPDs are programmed according to the configuration (Kconfig and
device tree) in ramstage.
BUG=348678529
TEST=Hardware is programmed as desired and Intel Panther Lake
reference board boots to UI.
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6989
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84552
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit removes the unnecessary layer provided by soc_info.[hc].
It was providing an abstraction which only was resulting in extra
function calls without any added value as the returned constants are
well identified and could be used directly. More importantly, and this
is the actual selling point in my opinion, this extra indirection was
preventing the compiler from detecting array overflows.
BUG=348678529
TEST=Build is successful
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6986
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel TXT SINIT required the D_LCK bit set. Although coreboot
tries to set it, the bit ws still clear. The D_LCK bit has to be
set using I/O CF8/CFC cycle.
TEST=Boot Linux with tboot on Protectli VP4670 with Intel TXT enabled
Change-Id: I03aff482b53ab7b0bcaccf18e47ad4c22b53583c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being mismatched.
If it's mismatched, the TBT port will timeout.
TEST=Boot starbook/rpl and check TBT 4 dock is correctly identified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3ab68c01f682723dab39870f0676e59ae3d89add
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77567
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On GNR, there are CXL Type-3 memory windows covered under TOHM. The
current 4GB to TOHM DRAM reporting doesn't work on GNR.
Use MemoryMapDataHob to add high RAM resources as a generic
mechanism for GNR and previous generation SoCs.
TEST=Build and boot on intel/archercity CRB
TEST=Build and boot on intel/beechnutcity CRB
(with topic:"Xeon6-Basic-Boot")
Change-Id: Ie5fbc5735704d95c7ad50740ff0e35737afdbd80
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84304
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=348678529
TEST=Build successful
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6987
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84607
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes the SoC-specific `FSP_STATUS_GLOBAL_RESET_REQUIRED_X`
Kconfigs, as they are no longer necessary for handling FSP global reset
requests.
Previously, these Kconfigs were used to select a specific 32-bit reset
status code. However, with the introduction of FSP 2.4 and 64-bit
interfaces, the global reset status code can now vary between
architectures.
To address this, the FSP driver now sets the `FSP_STATUS_GLOBAL_RESET`
config to a common default value (depending upon most commonly used
global reset status code) based on the interface:
- 0x40000003 for 32-bit FSP interfaces
- 0x4000000000000003 for 64-bit FSP interfaces
This default can be overridden if an FSP implementation uses a
different status code (for example: Apollo Lake selects different FSP
reset status code as 0x40000005).
By removing the SoC-specific configurations, this change simplifies
global reset handling and ensures compatibility across different FSP
versions and platforms.
Below table shows the relationship between Platform, FSP and FSP Global
Reset Status:
+-----------------+--------------+-------------------------+
| Platform | FSP | Global Reset Status |
+-----------------+--------------+-------------------------+
| Alder Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Apollo Lake | 32-bit | 0x40000005 |
+-----------------+--------------+-------------------------+
| Cannon Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Elkhart Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Jasper Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Meteor Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Sky Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Tiger Lake | 32-bit | 0x40000003 |
+-----------------+--------------+-------------------------+
| Panther Lake | 64-bit | 0x4000000000000003 |
+-----------------+--------------+-------------------------+
BUG=b:347669091
TEST=Verified FSP requested global reset functionality on google/rex0
(32-bit) and google/rex64 (64-bit) platforms.
w/ 32-bit FSP:
```
(Wdt) AllowKnownReset
[FspResetSystem2] FSP Reset Initiated
FSP returning control to Bootloader with reset required return status
40000003
FSPS, status=0x40000003
FSP: handling reset type, status=0x40000003
GLOBAL RESET!
global_reset() called!
HECI: Global Reset(Type:1) Command
```
w/ 64-bit FSP:
```
(Wdt) AllowKnownReset
[FspResetSystem2] FSP Reset Initiated
FSP returning control to Bootloader with reset required return status 3
FSPS, status=0x4000000000000003
FSP: handling reset type, status=0x4000000000000003
GLOBAL RESET!
global_reset() called!
HECI: Global Reset(Type:1) Command
```
Change-Id: I32bdbf7ea6afa7d5e5f91ea96d887719d26a593f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84572
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
The `fsp_get_pch_reset_status()` function returns a FSP reset status
code. This change corrects its return type from `uint32_t` to
`efi_return_status_t` to ensure consistency with the FSP API and
prevent potential issues caused by type mismatch.
This correction is necessary for compatibility with both 32-bit and
64-bit FSP interfaces. The change also updates all callers of this
function in the Meteor Lake and Panther Lake SoCs to use the correct
return type.
Includes `fsp/api.h` to provide the `efi_return_status_t` definition.
BUG=b:347669091
TEST=Verified global reset functionality on google/rex0 (32-bit) and
google/rex64 (64-bit) platforms.
Change-Id: I0cdee541506bf424f50fd00833d5ee200a3a8a48
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84571
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add "CNMT" Mutex, that will be used by the Bluetooth and CNVi
driver.
Change-Id: I607865458f925d6f4aa713e07cfa34e83b2e5c8f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84598
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It should be in HEX.
Change-Id: I15a354bae414ad94a2f76030b3099179022b935c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84546
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6e578199e7e4ca3a014eecb1eb7a4d9d24893b8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84161
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
regist*re*s → regist*er*s
Change-Id: Ie5f5cb481f0fac335e592fd3f1f56d5462e37c1e
Fixes: 2b0b2ef9a258 ("soc/intel/common/systemagent: select CAPID_A, BDSM and BGSM by Kconfig")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
FSP-M UPDs are programmed according to the configuration (Kconfig and
device tree).
BUG=348678529
TEST=Memory is initialized successfully and hardware is programmed as
desired on Intel pantherlake reference board.
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6988
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84443
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As https://doc.coreboot.org/contributing/coding_style.html#typedefs
states: "In general, a pointer, or a struct that has elements that can
reasonably be directly accessed should never be a typedef". This
commit makes the Intel Panther Lake SoC code comply with this by using
explicitly `struct soc_intel_pantherlake_config' in the
soc/intel/pantherlake code as I have been suggested to for the
`fsp_params.c' files. The rule being the rule and consistency across
a project matters more than personal preferences.
The documentation lists five exceptions and none on them cover the use
of `config_t' instead `struct soc_intel_pantherlake' but I believe it
does not make the code better for the following three reasons:
1. It is repetitive, make the line longer and the code is in
soc/intel/pantherlake so obviously the config_t data structure is
the pantherlake soc configuration.
2. It makes re-usability from one generation to another unnecessarily
harder.
3. This config_t abstraction is required for and used by some common
block code anyway. Hence, we end-up with some code using `config_t'
and other using the final structure which break the consistency of
the code when the project in looked as a whole.
BUG=348678529
TEST=Google fatcat mainboard compiles
Change-Id: Ibe382615db1a7c7a0841d8fe4ae43c226e2c2021
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
This commit introduces a new config DRIVER_INTEL_ISH_HAS_MAIN_FW to
indicate that the Intel Sensor Hub (ISH) is using the ISH MAIN firmware.
The ISH MAIN firmware is located in rootfs, hence we no longer need to
store the ISH BUP version in the CSE partition.
When this config is enabled, fetching the ISH BUP version from the CSE
firmware partition is skipped.
BUG=b:360144613
TEST=Local build successful and tested on trulo by toggling the
config. Enabling this config skips printing the ISH version in cbmem.
Change-Id: I6cacf7b44ce6895ecb96db295d184c7b7d5a872c
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84493
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This commit drops tcss_d3_hot_disable chip config as FSP is not
exposing the same purpose UPD anymore starting with Panther Lake
SoC.
BUG=b:348678529
TEST=Build for fatcat
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d58
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
"enable_c6dram" needs only 2 "states" to be clearly defined.
C provides "true/false", so use it instead of using unsigned int.
Change-Id: Icff1b42ceb2e89cc0b2e7abab6743430c635db7b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84155
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add device IDs for GNR PCIe root ports so that these devices can
be supported by the Xeon-SP PCIe root port driver.
Change-Id: I450c0088aa2e3be60489becf0600f534ea90d7a4
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84311
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP UPD VMX from Kconfig ENABLE_VMX.
Change-Id: I0c03f535b6f93761419657127e791c02e8ee4988
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84327
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both lpc.c and chip.c will create HPET table.
remove hpet_device_ops for avoiding create two HPET table.
Change-Id: I32628e98b5c1fac4b72ea3abf755b62847161bec
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I578b2c213ff1b33b4ca37e0422f690bedc9f5ba1
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84325
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IBL eSPI should be correctly configured by LPC driver so that console
input is usable.
Change-Id: I77cc6dd67b36035974e7f268d32b8473e8d83483
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Work around a GCC LTO bug. Even if no buffer overflow is bound to happen
as the soldered down path is taken GCC LTO complains about this.
Change-Id: Ib3d4ed8032bb06b6d08fbc2dc4b697df88745243
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
TME, Total Memory Encryption will be enabled once the feature is
fully verified with Panther Lake.
Change-Id: I600c8a499df3b8796df35813422d0e89f67cc630
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84418
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Similarly to what is done in Meteor Lake, the PortResetMessageEnable
UPD can be set based on usb2_port[].type_c setting and therefore
usb2_port_reset_msg_en is not necessary.
BUG=b/348678529
TEST=Build for fatcat
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d57
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84429
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Each TCSS port can be associated a setting via the tcss_cap_policy
device tree field. The setting can be picked within five values listed
by this commit.
BUG=b/348678529
TEST=fatcat board build tcss_cap_policy[0]=TCSS_TYPE_C_PORT_FULL_FUN
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d56
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to add GPE1 block
rather than checking if GPE1_STS(0) is '0'.
BUG:362310295
TEST=with the flag, boot google/fatcat or intel/ptlrvp to OS and check
that FADT table includes GPE1. FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Without the flag, boot to OS and check that FADT table does not include
GPE1. FADT should have:
GPE1 Block Address : 0
GPE1 Block Length : 0
GPE1 Base Offset : 0
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Idd8115044faff3161ea6bd1cae6c0fe8aa0ff8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Change-Id: Ied08e5e9fe4913bd60474ed7dcf88b945172558d
Signed-off-by: Jeremy Soller <jeremy@sysetm76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In newer SOC, such as PTL, there is no DMI. Exclude DMI memory range in
northbridge.asl if DMI_BASE_SIZE is '0'
BUG=b:348678529
TEST=Build CB with DMI_BASE_SIZE set to '0' in the SOC directory. Boot
to OS and check ACPI PDRC device from the ACPI DSDT table. There should
not have an entry for DMI in its _CRS method.
Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I971af2eb214b5940fa09d9dc0f9717bb5f0dfb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84349
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
tuning
If real-time tuning was enabled, 'PchPwrOptEnable' was set two times
with different values. This patch fixes the issue.
BUG=none
TEST=Enabled FSP UPD debug output and checked 'PchPwrOptEnable' offset
Change-Id: I2f31015c1da51a4ae1b8d5226f5d7b60a6023f3d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84399
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ELOG for CSE updates was being added in fsp_params.c, but the
actual update happens in cse_lite.c. This commit moves the ELOG to
cse_lite.c to more accurately reflect where the event is happening.
This also removes the need for a sol_type variable in
meteorlake/romstage/fsp_params.c.
It also helps to avoid redundant ELOG event entry while performing
CSE update (due to CSE RO to RW switch dependency).
BUG=b:361253028 (Multiple CSE sync elog prints for Nissa/Trulo)
TEST=Able to see only one instance of ELOG while performimg CSE sync.
w/o this patch:
elogtool list
0 | Log area cleared | 4088
1 | Kernel Event | Clean Shutdown
2 | Early Sign of Life | MRC Early SOL Screen Shown
3 | Early Sign of Life | CSE Sync Early SOL Screen Shown
4 | System boot | 29
5 | Memory Cache Update | Normal | Success
6 | Early Sign of Life | CSE Sync Early SOL Screen Shown
w/ this patch:
elogtool list
0 | Log area cleared | 4088
1 | Early Sign of Life | MRC Early SOL Screen Shown
2 | Memory Cache Update | Normal | Success
3 | System boot | 30
4 | Memory Cache Update | Normal | Success
5 | Early Sign of Life | CSE Sync Early SOL Screen Shown
Change-Id: I37fe3f097e581f79bf67db1ceb923f10ce651d62
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake-up from sleep states.
3. Add SoC ASL code for SoC IPs like IPU, HDA etc.
4. PTL replaces DMI3 with SAF to ensure
common/block/acpi/acpi/northbridge.asl binding with PTL change,
#if DMI_BASE_SIZE guard check is added in northbridge.asl
5. include GPIO ASL that supports new pinctrl schema.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f15
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable the CRASHLOG config option for Chrome OS boards. This allows the
Chrome OS crash reporter to collect and analyze crash dumps, aiding in
debugging and improving system stability.
TEST=Able to build and boot google/brox
Change-Id: Ia23ef1cbebdba9a3b724204eb25ee788afa3e8fd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This reverts commit 88a496a9c81ba6447a4c1453a45d09ee79f30309.
This workaround is not valid with the latest Intel PRQ silicon,
so I'm dropping it now. Additionally, able to boot to ChromeOS without
any hang, and I also ran an S0ix cycle without any failures.
BUG=b:244082753
TEST=Able to boot google/rex0 to CrOS.
Change-Id: Idf0da5841705888d2787f61dd6e6fada2fbe3e3e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84368
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I88baa159475ac57ec6a2a638ab84f76a6af4fe82
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84318
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery is disconnected and only adaptor is connected higher PL2
power draw causes cpu brown out and system does not boot to kernel. To
avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome
power spikes from SoC during boot. Remove Psys implementation as it
impacts active state platform performance.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=Able to successfully boot on 3 different Brox proto2 SKU1
and SKU2 boards with 65W, 45W and 30W adaptors for 3
iterations of cold boot.
Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Iebfadffd2da83992af983b8c0dfe2706f81eb728
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84317
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I816c6f68840c122fbc37085e31a1b0368a819f4a
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84313
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GNR-AP supports up-to 128 cores/256 threads per socket. Enlarge
MAX_CPUS to 512 = 128*2*2 with 2 socket configuration considered.
Change-Id: I8dc46dcdd3ca1c3ddfa47fbb28912a2c6e4c46fa
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84312
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Xeon-SP, DCACHE_BSP_STACK_SIZE is by default 0x10000. For GNR,
this default size is enough. Use the default size so that more
CAR spaces could be saved for other purpose.
Change-Id: I68a79df150c4954ef8d703987d7c0bb446ba4cda
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84302
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till ramstage.
2. Include only required headers into include/soc.
3. Skeleton code used to call FSP-S API.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: I61930726ad0c765bfa1d72c5df893262be884834
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84332
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The calculation of non-eviction ways (used for cache-as-ram
configuration) has been simplified by removing conditional move
instructions and directly adding the remainder to the quotient.
This achieves the same ceiling operation but with potentially improved
efficiency (less instructions).
No functional changes are expected.
TEST=Able to build and boot google/rex.
Change-Id: I7cf5ff19ec440d049edc3bf52c660dea96b1f08a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
With the release 20240910 of the Intel microcode repository, it also
includes the updated microcode file with version 0x129, which makes the
one from the coreboot blobs repo superfluous. Thus, use the one from the
Intel repository again.
Change-Id: I7fb58874719a8373072419e34b3f8923f7db927d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84295
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These identifiers are not included in the GPU list from Intel [1].
At the same time, 0x9B44 is not PCI DID of graphics device at all:
8086:9B44 - 10th Gen Core Processor Host Bridge/DRAM Registers [2].
[1] https://web.archive.org/web/20240731152818/https://
dgpu-docs.intel.com/devices/hardware-table.html
[2] https://web.archive.org/web/20231004011832/https://devicehunt.com/
view/type/pci/vendor/8086/device/9B44
Change-Id: I8ff7b062f930cb63ffd9caf240874742bd53fc23
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ifbe76bd69d847603345a4a1fa4f41e529634fa92
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84158
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Should make the sorting order of the paths more obvious.
Change-Id: Ie73e717f37f80a11a903e99cc094ea4d76e1ca1f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83827
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Alder Lake "Client" FSP paths have been replaced by symlinks to
Raptor Lake in the FSP repo. Hence we get the same files anyway and
can spare us to maintain the individual paths.
Change-Id: Ia9b256ce1940894e2cf31acaa4a83ea39f6723b6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The `!FSP_USE_REPO` is most specific, if we're not using the FSP repo,
we can ignore all the FSP-repo paths. Hence put these first.
Having `FSP_TYPE_IOT` selected is also more specific, we can ignore all
the "Client" paths then. This makes sure that we don't catch a "Client"
by accident (otherwise we'd have to add a `!FSP_TYPE_IOT` for those).
Change-Id: Ibe9931d8f964a337c46fde31a3bc22c69d40eded
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Xeon-SP supports MMIO high range, a.k.a. MMIO range above 4G. FSP will
assign domain MMIO high windows from this range.
However, there will be unassigned parts among these high windows for
non-domain device usage (e.g. misc devices belonging to an IIO stack
but not belonged to any PCIe domains under that stack). This will cause
segmentation in MTRR UC coverage.
For example, in SPR-XCC where only CPM0/HQM0 are supported and
instantiated to PCIe domains, MMIO ranges are still reserved for
CPM1/HQM1. See more at src/soc/intel/xeon_sp/spr/ioat.c.
Reserve MMIO high range as a whole under domain0/00:0.0. During MTRR
calculation, this reservation will connect the discontinued domain MMIO
high windows together to form one continuous range, and save MTRR
register usage from inadequacy.
This change is initially raised for SPR but could be effective for GNR
as well.
TESTED = Build and boot in intel/archercity CRB, MTRR register usage
decreases from 7 to 3 in 2S system.
TESTED = Only setting MTRR for below 4GB ranges test fails with
LinuxBoot on SPR (through x86_setup_mtrrs_with_detect_no_above_4gb)
tsc: Detected 2000.000 MHz processor
last_pfn = 0x2080000 max_arch_pfn = 0x10000000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 129024MB of RAM.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/cpu/mtrr/cleanup.c:978 mtrr_trim_uncached_memory+0x2b9/0x2f9
...
Call Trace:
? 0xffffffff8f600000
? setup_arch+0x4bb/0xaed
? printk+0x53/0x6a
? start_kernel+0x55/0x507
? load_ucode_intel_bsp+0x1c/0x4d
? secondary_startup_64_no_verify+0xc2/0xcb
random: get_random_bytes called from init_oops_id+0x1d/0x2c with crng_init=0
---[ end trace 0e56686fd458f0c5 ]---
update e820 for mtrr
modified physical RAM map:
modified: [mem 0x0000000000000000-0x0000000000000fff] reserved
...
modified: [mem 0x00000000ff000000-0x000000207fffffff] reserved
last_pfn = 0x6354e max_arch_pfn = 0x10000000000
Memory KASLR using RDRAND RDTSC...
x2apic: enabled by BIOS, switching to x2apic ops
Using GB pages for direct mapping
...
Initmem setup node 0 [mem 0x0000000000001000-0x000000006354dfff]
DMA zone: 28769 pages in unavailable ranges
DMA32 zone: 19122 pages in unavailable ranges
BUG: unable to handle page fault for address: ff24b56eba60cff8
BAD
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.10.50 #2
...
Call Trace:
? set_pte_vaddr_p4d+0x24/0x35
? __native_set_fixmap+0x21/0x28
? map_vsyscall+0x35/0x56
? setup_arch+0xa00/0xaed
? printk+0x53/0x6a
? start_kernel+0x55/0x507
? load_ucode_intel_bsp+0x1c/0x4d
? secondary_startup_64_no_verify+0xc2/0xcb
CR2: ff24b56eba60cff8
---[ end trace 0e56686fd458f0c6 ]---
RIP: 0010:fill_pud+0xa/0x62
...
Kernel panic - not syncing: Attempted to kill the idle task!
---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Change-Id: Ib2a0e1f1f13e797c1fab6aca589d060c4d3fa15b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83538
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add definitions for the GPIO pins on Panther Lake SoC,
as well as GPIO IRQ routing information and defines for ACPI ASL.
For now, add the following GPIO communities and GPIO groups:
Comm. 0: GPP_V, GPP_C
Comm. 1: GPP_F, GPP_E
Comm. 3: CPUJTAG, GPP_H, GPP_A, VGPIO3
Comm. 4: GPP_S
Comm. 5: GPP_B, GPP_D, VGPIO
ref doc:
- PT EDS vol2
- Panther Lake H GPIO Implementation Summary (#817954)
BUG=b:348678529
TEST=Verify on Intel Silicon platform for PTL using google/fatcat
mainboard. Note that these GPIO changes cannot be verified along as
they are merely data structure and defines for the SOC. With the
GPIO ASL, we should see the following GPIO instances under
/sys/bus/acpi/devices when booting to OS:
INTC10BC:00/ INTC10BC:01/ INTC10BC:02/ INTC10BC:03/ INTC10BC:04/
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iae1bc072841214efaec7a10719dbc742f2da795b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Based on DOC #767454 (public) version 1.2. Allows to boot the
HARDKERNEL ODROID H4+ with N97 SoC. Without this patch the MCH ID
was not recognized and the SA driver did not pick up the stolen
ranges, causing the PCI MMIO allocation to be placed in the stolen
areas.
TEST=Boot HARDKERNEL ODROID H4+ with N97 SoC to Ubuntu 23.04.
Change-Id: I0fbdb12c6411e4109e68a13960b4570701629bc9
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84212
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Move the `BUILDING_WITH_DEBUG_FSP` Kconfig option from SoC-specific
files to the FSP2_0 driver Kconfig to avoid duplication. Also slightly
improves the option's prompt and help text.
TEST=Built and booted google/rex successfully.
Change-Id: I5c3dce59c396f6c1665a3ed1b8c1bb5df0f5a8d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds a new Kconfig option `FSP_PUBLISH_MBP_HOB` to
control the creation of the ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
Disabling this option can improve boot time on platforms that
do not utilize the MBP HOB, such as ChromeOS devices.
The option is disabled by default on ChromeOS and enabled
by default on other platforms.
On ADL-P based platforms, this option is forced to be enabled
as ADL-P FSP relies on MBP HOB for ChipsetInit version for
ChipsetInit sync.
Removed SoC specific implementation of `FSP_PUBLISH_MBP_HOB` config
from MTL and TGL config file.
TEST=Tested on ADL-P and ADL-N platforms. Verified that MBP HOB is
created when `FSP_PUBLISH_MBP_HOB` is enabled and not created when
it is disabled.
Also verified that the system boots successfully in both cases.
Change-Id: I21da00259c0b9bcca6f545291a6259e9cce8d900
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add specific virtual wire mapping structure for:
- First pad group does not starts with bit position 0.
- vw_index and position are not continuous in between groups within a
community.
BUG=
TEST=boot to OS and use iotools to read the registers that use 16-bit
port ID such as IOM AUX Bias Ctrl register to verify the 16-bit group
ID field.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I986d4f4fe59b110e5075cab8742dfe8b336d034b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
iasl refuses to perform an arithmetic computation in a QWordMemory
parameter and fails with the following error.
dsdt.asl 2149: 0x4010800000, ((0x4010800000 + 0x10000) - 1), 0x0,
Error 6051 - ^ Address Min is greater than Address Max
This commit replaces the arithmetic with the result to define
IOM_BASE_ADDR_MAX.
BUG=b:348678529
TEST=Build for google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f16
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I62d0e324329fdde599e67efb23f813e3b3c650ef
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84199
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to enable GPE1 block.
This will include GPE1 blocks to FADT with their info.
BUG=362310295
TEST=boot to OS and check that FADT table include GPE1.
FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia6928c35b86f4a2243d58597b17b2a3a5f54271e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84103
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors ITSS related SoC specific macros by consolidating
them into a common itss.h file. This improves code maintainability and
reduces redundancy as each SoC previously defined the same macros.
Specific changes include:
- Move SoC specific ITSS macros into intelblocks/itss.h.
- SoC code now includes intelblocks/itss.h instead of the SoC-local
soc/itss.h.
- Drop soc/itss.h from static ASL files.
- Delete soc/itss.h from all SoC locals except Apollo Lake and
Sky Lake.
TEST=Able to build and boot google/hatch, google/xol and google/karis.
Change-Id: I6461dc93b0d21bec5429075bc26435bae3754d74
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84183
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Details:
- Add (POWER_CTL) – Offset 0x1fc required bits.
Change-Id: Ief7f514c5837cb2f7c3158b67c4f6fed86796e71
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
This patch removes the GPIO_IRQ_START and GPIO_IRQ_END definitions
from itss.h for Alder Lake, Cannon Lake, Elkhart Lake, Jasper Lake,
Meteor Lake and Tiger Lake. These definitions are no longer needed.
TEST=Able to build and boot google/xol and google/karis.
Change-Id: I60a08ba2c894fd1c1af6c6aef3ddc4a33ec63e76
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84182
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes the unused pch_handle_sideband() function from the
Meteor Lake platform code.
TEST=Able to build and boot google/rex.
Change-Id: Idd14748aa1d917d6e88d738541a737c04a2c6a15
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: I5cd04972936c14d92295915fad65c7a45a8108d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ida4461de6275bdd314f5cba441d3ff631d570305
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
CAPID_A, BDSM and BGSM registers may not exist on specific platform,
this patch add `HAVE_CAPID_A_REGISTER` and `HAVE_BDSM_BGSM_REGISTER`
to select them.
Change-Id: I4d1197b8b1071aefc2ea1ed2f707d769aabab5e4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Change-Id: I46021accacbb911d7a7ecfdbb52973a7da78f36e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- Add Kconfig: SOC_INTEL_COMMON_BLOCK_GPIO_16BIT_CPU_PORTID.
- Change cpu_port field to 16-bit width if the Kconfig is set.
BUG=none
TEST=boot to OS and use iotools to read the registers that use 16-bit
port ID such as IOM AUX Bias Ctrl register to verify the 16-bit group
ID field. The bit 15:8 of the returned port ID value should be 0xF2
instead of zero.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I8c1a48d587bd41178b0c6bb0144fda93e292423d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83981
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, `early_graphics_stop()` was skipped unconditionally if
`CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` was enabled. This led
to overlapping screens when CSE sync was not triggered in ramstage,
as both the eSOL message and the firmware splash screen would be
displayed.
This change refactors the condition for calling `early_graphics_stop()`
to ensure it is only skipped if a CSE firmware update is actually
required *and* `CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` is set.
This allows eSOL to display its message during CSE sync, but tears
down early graphics programming in other cases to prevent overlapping
screens.
Additionally, this change ensures that `early_graphics_stop()` is the
last function called by the romstage to guarantee proper cleanup.
BUG=b:362895813
TEST=Able to boot google/tivviks_ufs without overlapping screens.
Change-Id: Idc01bfc8963d65fcb0441300e7c9267eaaefefb9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
LTO does not like that assert on a constant, so use the more appropriate
static assertion.
Change-Id: I52094ec825fcec56a9b9fb6b9abc58644c2bf9cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On xeon-sp this is a zero length array. With GCC LTO this triggers the
stringop-overread warning. To work around this change the signature of
the function from an array to a pointer.
Change-Id: Ieee6e9bddc4e738eb560dd0e69dc3087ac9f5da6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
This is the same fix as be5dc3daa "soc/intel/alderlake: Configure DDR5
Physical channel width to 64"
Building with GCC LTO cought this buffer overflow when assigning SPD
addresses to a buffer.
Change-Id: Ief6018e4dcce6b26804ff864cdfe116f0f90d545
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The driver sets ACPI names for PCIe root ports and its subordinate
devices, and fill SSDT for them accordingly. SPR PCIe root port
devices are initially supported.
TEST=Build and boot on intel/archercity CRB
Change-Id: I81bd5d5a2e62301543a332162a5a789e0793e18e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This updated microcode fixes the recent voltage issues on the Raptor
Lake S platform. Intel provided this specific microcode just as an
attachment [1]. Thus, we've uploaded it to our own blobs repository,
which is why the path is changed.
Microcode signature:
sig 0x000b0671, pf_mask 0x32, 2024-07-18, rev 0x0129
[1] https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/81
Change-Id: I6d01e38476b0d3dc5281ea1d85bac87043d122dd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84132
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The underlying IMD function already returns an integer which indicates
success or failure.
This removes the need to have initialized variables that need to be
checked for NULL later. In some cases this actually adds the appropriate
check for returned values.
Dying is appropriate if cbmem is not found as it is essential to the
bootflow.
Change-Id: Ib3e09a75380faf9f533601368993261f042422ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to RDC#646929 Power Map, there are two expected values of
VccInAuxImonIccImax and the value has to align with HW design.
But in current code, vccin_aux_imon_iccmax is hard code to 27000 (27A),
hence, provide a config for projects modification.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST=Modify the register and add a printk to output a debug message
to observe whether the value is changing as expected.
Change-Id: I0651f0eb8a5c32b27c524e43bbf6f2a184b95657
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch eliminates the LPC_IOE_COMA_EN and LPC_IOE_COMB_EN IO enables
from the io_enables variable in the pch_early_iorange_init() function
because lpc_io_setup_comm_a_b() is intended to activate legacy COM
ports like COM-A (0x3F8 - 0x3FF) and COM_B (0x2F8 - 0x2FF).
These COM ports are being activated unconditionally, which is
undesirable for the Intel Alder Lake platform and causes traffic over
the IO bus.
As a result, this code is being removed and platforms that select
DRIVERS_UART_8250IO can activate legacy COM ports.
BUG=b:354066052
TEST=Able to boot google/redrix to the operating system and confirm
that there was no traffic over legacy COMs while being monitored
using the eSPI analyzer.
Change-Id: I7a6e38bd151f823d37c07ee89a800489122cc209
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84080
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option.
Support for fast modeset joining has been added to the mainline i915
kernel driver (https://patchwork.freedesktop.org/series/130480/),
making this coreboot-specific workaround unnecessary.
BUG=b:291885733
TEST=Successful build and boot of google/marasov with single and dual
displays, no redundant boot splash.
Change-Id: I53c08a0e7a40b24db7cc910c5b9adc2376a9bb17
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
These field defines are SOC-specific. The AUX bias virtual wire field
positons are shifted in PTL.
In MTL SOC and older:
7:0 GROUP_ID Group ID in PCH GPIO
10:8 BIT_NUM Data bit Position in PCH GPIO
23:16 VW_INDEX VW Index in PCH GPIO
In PTL SOC:
15:0 GROUP_ID Group ID in PCH GPIO; targeted SB_PORTID
18:16 BIT_NUM Data bit Position in PCH GPIO
31:24 VW_INDEX VW Index in PCH GPIO
BUG=361048817
TEST=boot to OS and use iotools to read AUX Bias Ctrl register to
verify the group ID, bit number, and vw index.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I0f9c895590465b2f539c91834cf331fcd7efa996
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83980
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Extend support for CrashLog to Intel Jasperlake based platforms.
This commit is based on 15cbc3b5996ae64aff2e4741c4c3ec3d7f5cc1a7,
originally reviewed on https://review.coreboot.org/c/coreboot/+/49943.
BUG=b:354834461
TEST=CrashLog can be enabled in Kconfig for Jasperlake based platforms
and can generate a BERT table, if enabled.
Change-Id: Ia18a79d8de849d556b4b8fd0e6b43090311eb23f
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
This patch extends the eSOL implementation on Alder Lake to render text
messages during late CSE sync (from ramstage).
Currently, the eSOL is limited to the early boot phase (until romstage)
and only displays FSP-M memory training warnings or messages during
early CSE sync (at romstage).
Platforms like Nissa/Nirul and Trulo, which use CSE sync from ramstage,
cannot display any eSOL messages, resulting in a brief black screen
during CSE firmware updates.
This patch implements the following logic to scale eSOL for late CSE
sync (at ramstage) without recompiling eSOL code for ramstage:
1. During boot, check if the MRC cache is available. This indicates the
need for memory/DRAM training and triggers an eSOL message.
2. For CSE lite SKUs (applicable to CrOS), leverage the
`is_cse_fw_update_required` API to check if the current CSE RW
firmware version differs from the CBFS metadata file version.
If so, trigger an eSOL message indicating a CSE sync is required.
3. If either condition #1 and/or #2 is true, the AP firmware renders
an eSOL text message using LibGfxInit for the Alder Lake platform.
BUG=b:359814797
TEST=eSOL text messages are displayed during CSE sync and FSP updates.
tirwen-rev3 ~ # elogtool list
0 | ... | Log area cleared | 4088
1 | ... | Early Sign of Life | MRC Early SOL Screen Shown
1 | ... | Early Sign of Life | CSE Sync Early SOL Screen Shown
2 | ... | System boot | 197
3 | ... | Memory Cache Update | Normal | Success
4 | ... | System boot | 198
5 | ... | Firmware Splash Screen | Enabled
Change-Id: I1c7d4475ed5cf6888df1beebab0641ee4203b497
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83975
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch prevents the eSOL screen from being wiped out on Alder Lake
platforms that use late CSE sync (from ramstage). This allows the eSOL
text message to remain visible until ramstage.
Currently, the eSOL only functions during the early boot phase (until
romstage), so platforms like Nissa/Nirul and Trulo, which use CSE sync
from ramstage, cannot display any eSOL messages to the user.
A future patch will ensure the eSOL remains relevant for CSE sync in
ramstage, but this patch is necessary to avoid tearing down the IGD text
mode when exiting romstage.
BUG=b:359814797
TEST=eSOL text mode is not torn down when exiting romstage.
Change-Id: I81548b4057ab95ce3da0dbc69703977baf0581f1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This enables SOC_QDF_DYNAMIC_READ_PMC and adds pmc_dump_soc_qdf_info
to report_cpu_info to dump QDF information from bootblock.
Change-Id: Iaf6f46cd9be831dde345c3b3728cd66145746d68
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com>
|
|
This adds pmc_ipc to bootblock if SOC_INTEL_COMMON_BLOCK_PMC is enabled.
The good place to report SoC QDF can be report_cpu_info in bootblock.
QDF read is done by PMC IPC Command, so this adds pmc_ipc to bootblock
to enable calling pmc_dump_soc_qdf_info.
Change-Id: Id0391eae48fc53cd652acd09e6380ca6802eaf88
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
`CONFIG_DCACHE_RAM_SIZE' is not necessarily a multiple of way size. As
a result, when the `div' instruction is called to compute the needed
number of ways, there could be a remainder. When there is, one extra
way should be added to cover `CONFIG_DCACHE_RAM_SIZE'.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83982
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 16ab9bdcd578612bb3822373547f939eb90afd82 ("soc/intel/common:
Calculate and configure SF Mask 2") breaks the computation of the
number of ways and as result, all the derived masks. It results in MSR
such as `IA32_L3_MASK_1' to be improperly programmed yielding
unpredictable NEM issues such as hangs.
Indeed, this commit has introduced a backup of 0x1 into %edx before
comparing the requested cache-as-RAM size against the way size. When
the requested cache-as-RAM is larger, it reaches the second part of
the algorithm which computes the necessary number of ways to fit the
requested cache-as-RAM.
This algorithm uses the `div' instruction. Per specification, the div
instruction divides the 64 bits combination of %edx and %eax register.
Since 0x1 got backed up in %edx and assuming a
`CONFIG_DCACHE_RAM_SIZE' of 0x200000, we end up dividing 0x100200000
by the way size instead of 0x200000 which result in a necessary number
of ways of 4098 for a way size of 0x100000.
This commit clears the %edx register before calling the `div'
instruction.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521d
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83948
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel's PMC CrashLog size in legacy mode is expressed in DWORDs and
therefore needs to be explicitly recalculated to bytes.
BUG=None
TEST=Built and checked the size in logs
Change-Id: I2678d537439c24fbd10aa3ceffee63c9a849d28b
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_PANTHERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
TEST=Able to build and boot google/fatcat without any functional impact
while debugging.
Change-Id: I36bbe14d02654ed9dbda21df0d9a6a6769b87754
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_METEORLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/rex0 without any functional impact
while debugging.
Change-Id: I657d20a38e15eee333a4e45c0c600736148173d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83961
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_ALDERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/redrix without any functional impact
while debugging.
Change-Id: I9a9c81b72d707f5ed2e1a53c139ee22be0e30068
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_TIGERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/volteer without any functional
impact while debugging.
Change-Id: I3e96b20e7e8b3ce3c2e4884abd315a5cc55fe71d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_JASPERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/dedede without any functional
impact while debugging.
Change-Id: I3e7abaf5fb3a0d5528041af5ce767a15fc738870
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83960
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot intel/elkhartlake_crb without any
functional impact while debugging.
Change-Id: Idb8db7230c432792e742218d41d891c529b2114f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83959
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_CANNONLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/hatch without any functional impact
while debugging.
Change-Id: Ifad11652b5fa6ff14f713f55a721cdbbfbfde471
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83958
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I15dfd5ed0541352930c3b70252b3e536ad1e6efd
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch adds a generic config option, SOC_INTEL_COMMON_DEBUG_CONSENT,
to control the debug interface on Intel SoCs. This eliminates the need
for SoC-specific config options like SOC_INTEL_<SOC_NAME>_DEBUG_CONSENT.
Default values are provided for various debug types:
- 0: Disabled
- 1: Enabled (DCI OOB + [DbC])
- 2: Enabled (DCI OOB)
- 3: Enabled (USB3 DbC)
- 4: Enabled (XDP/MIPI60)
- 5: Enabled (USB2 DbC)
- 6: Enabled (2-wire DCI OOB)
- 7: Manual
Specific SoCs can override the SOC_INTEL_COMMON_DEBUG_CONSENT value
using SoC config override methods.
TEST=Able to build google/rex.
Change-Id: I84ad03f0ffe5da4bc53c665489c430fe9b65ede7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch selects the SOC_INTEL_COMMON_BASECODE option for Elkhart
Lake so that future patches can incorporate the common code debug
feature with it.
TEST=Able to build the EHL platform.
Change-Id: I71d95352fe627a7f1912f802aa971ad1ebbbead7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
List of changes:
1. Add required SoC programming till romstage
2. Include only required headers into include/soc
3. Fill required FSP-M UPD to call FSP-M API
4. Ref: Processor EDS documents
Panther Lake U/H 12Xe/H 4Xe External Design
Specification (EDS) Rev. 0.7, vol 1 of 2 #815002 and
Volume 2 of 2 #813030
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: I27e1a6c56bca01e7f5f53fbf3cb6855bac7b2848
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|