Age | Commit message (Collapse) | Author |
|
List of changes:
1. Move pch_enable_ioapic() into common block code.
2. Remove redundant LPC functions from SoC directory and
refer from block/lpc directory.
TEST=Able to build and boot hatch and tglrvp platform without seeing
any functional impact.
Change-Id: I2a6afc1da50c8ee5bccda7f5671b516dc31fe023
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move duplicate .h files to top level xeon_sp/include/soc from
silicon specific cpx/include/soc and skx/include/soc.
Change-Id: I11d8a95a4b2f9451615b236798b3bd030c724858
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45221
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up acpi.h in preparation for merging with cpx/ acpi.* files
Change-Id: I2a0dc964eeb7f8da53676eb94c4385ff8668f6af
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45218
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move and use the common xeon_sp/cpx/acpi asl for skx/.
There were only minor whitespace differences between the directories.
Update the mainboards to build the moved files.
TiogaPass coreboot.rom checked with BUILD_TIMELESS.
Change-Id: I5058a3fe8d96075a266fb92f10707bb94308c85b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45217
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The skx uncore ACPI scope was missing the \ on \_SB causing
the uncore IRQs to not be in the namespace. This addresses
ACPI uncore IRQ routing issues. This was found preparing
skx acpi to match cpx acpi for merging in the future.
Check scope in dsdt.asl in tiogapass build.
Change-Id: I799042babbe60287e5e4ec60b21c08d57ccda04b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45269
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prepare for merge with cpx.
Use the C style operators instead of the ACPI1.x polish notation.
This is much easier to read and matches the cpx code.
This generates the same ASL code.
Checked with BUILD_TIMELESS on TiogaPass.
Change-Id: Id44138894d2ffed4c93afe5d4bbb4d59b538b577
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45270
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the skx uncore ACPI routing tables to match cpx. This
adds the IRQ routing for B-D for legacy and IOAPIC modes.
Change-Id: Iac0ffdb467a78b9befe7402c074835ea602d43c8
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Increase the DRAM cache size for Braswell to address the
compilation error
Cache as RAM area too full
when moving the mrc_cache writeback to romstage. We need to increase
this first before landing the CL moving mrc_cache writeback to
romstage.
BUG=b:150502246
BRANCH=None
TEST=Able to successfully compile braswell boards
Change-Id: I1538d504ddad8654c79a789e58ffe6b11b5d544c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45827
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate
older x86 platforms that don't allow writing to SPI flash when early
stages are running XIP from flash. If
BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected,
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms
that write to flash in the earlier stages, assuming that they have
that capability.
BUG=b:150502246
BRANCH=None
TEST=diff the coreboot.rom files resulting from running
./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless
with and without this change to make sure that there was no
difference. Also did this for GOOGLE_CANDY board, which is
baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES
enabled).
Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set TmeEnable FSP-M upd based on config.
TEST: TME ENABLE and LOCK bits get set when Tme is enabled.
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Ia804c88057e17844f055fd852fc0b36cfe316432
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Some cases are inconsistent. Refer to the 495 series on-package PCH to
confirm which GPIO pads are the first for each community and fix it.
Change-Id: Ie4c4c12c6629478d754f55fa3fb75fa16eb01335
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This patch ensures PMC offset 0xfc resides into pmc.h rather defining
into p2sb.h.
Change-Id: Iae1c38beae15355a077be80112b723b8ad3d0a44
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45800
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per EDS PMC BASE Offset 0x31C is known as CPPMVRIC hence rename
CIR31C with CPPMVRIC.
Change-Id: Idaff62fb742e6c58b1d8e662b5e4087fa2da79a3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45795
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces pch_interrupt_routing[] with PCH_IRQx macro.
Change-Id: I9645b0e185bcde7b27da35863564dbcf73850e8c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45788
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is needed to make use of LPC common code.
Change-Id: I5d0e8dbf8f8e52caf4ba78c0e3969efaac387204
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add IGD Device ID and MCH Device ID for Jasperlake.
Reference is taken from Jasperlake EDS volume 1(Document Number:
613601).
TEST=Build and boot Jasperlake platform.
Change-Id: I00ee7950ffa378b428a76bf367a9a05ab287e7ed
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Add config option to enable TME/MKTME.
The spec is available at: "https://software.intel.com/sites/
default/files/managed/a5/16/Multi-Key-Total-Memory-Encryption-
Spec.pdf"
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I181aed2bf4a79005fe42e3e133b5faee91201dad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This reverts commit d51449d017410fedb55e93f71fb322749ba888b5.
Reason for revert: Causing compilation issue as below
src/soc/intel/xeon_sp/cpx/acpi.c: In function 'acpi_create_rhsa':
src/soc/intel/xeon_sp/cpx/acpi.c:825:4: error: initialization
discards 'const' qualifier from pointer target type
[-Werror=discarded-qualifiers]
&hob->PlatformData.IIO_resource[socket];
^
Change-Id: I7050060f1db7b9a9b5a77b5a6245c8fda05623a4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44998
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI name for CSTACK. The name is PC00 to match with ACPI table
generated.
The PCIe domain has multiple PCIe stacks. devicetree.cb at the moment
does not support multiple PCIe stacks, eg. IIO stacks. For now, assign
the name to PCIe domain. In future, the name needs to be assigned to
CSTACK.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I24a6f29734452426218419cdcf66702edde96f46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add ACPI name for LPC device. The name matches with what is in
soc/intel/common/block/acpi/acpi/lpc.asl.
Since several Intel SOCs select CONFIG_SOC_INTEL_COMMON_BLOCK_LPC,
remove duplicated acpi name assignments.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If418c83caafe5d9e2af135a8946cbe5eb687b9ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This file uses `bool` and `size_t` types, so <stdint.h> isn't enough.
Change-Id: I8099142d92cc8ca6721f76522f3d30d4b6b9ee80
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Coverity detects performance inefficiencies as IIO_RESOUCE_INSTANCE
structure (size 623 bytes) is PASS_BY_VALUE. Fix it with
PASS_BY_REFERENCE.
Found-by: Coverity CID 1432759
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I9ae9ae38fe2c13c5433aa5e1dcbb30ebd30622ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
With commit f2eb687d19 (soc/intel/{cnl,icl,skl,tgl,common}: Make
changes to send_heci_reset_req_message()) the return value was
changed on a single path. Update the other paths too, even though
it's the discouraged 0-is-failure.
Change-Id: I179a6a4b1e13565dd58c908eb2a9725052a4de9d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add memory part H5ANAG6NDMR-XNC. Attributes are derived from data
sheets.
BUG=b:165611994
TEST=Compared generated SPD with data sheets and checked in SPD
Change-Id: Ifdcc7536441e9f0b94543c6f06fe466596f752dc
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
While we're at it, fix up cosmetics on a few comments. The GADD method
seems to suffer from copy-paste symptoms. A follow-up will address this.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Intel Ice Lake U RVP does not change.
Change-Id: I613f5f65638b92ca23f3ce15a15dd063afa52c31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
While we're at it, fix up cosmetics on a few comments.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Purism Librem 15v4 does not change.
Change-Id: Ib27c5b48459e3ea7eabc34457cb204994ee9b617
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45691
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54f96911b744f1737f7141c8a96329c95ace529d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Newer platforms use an unsigned type instead of an int. Follow suit.
Change-Id: I316864d3aed203c7c2bc962772895774fbc0c8da
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Add definitions for the GPIO pins on Alder Lake LP,
as well as GPIO IRQ routing information and supporting ACPI ASL.
For now, add the following 5 GPIO communities and 13 GPIO groups:
Comm. 0: GPP_B, GPP_T, GPP_A
Comm. 1: GPP_S, GPP_H, GPP_D
Comm. 2: GPD
Comm. 4: GPP_C, GPP_F, GPP_E, GPP_HVMOS
Comm. 5: GPP_R, GPP_SPI0
Change-Id: I77b9dcc46aceaf530e2054c9cacd7b026ebbb96b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch moves gpio_op.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify all methods present inside
common gpio_op.asl like GRXS, GTXS etc. are still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I248f5e66994d2f3d6b0bd398347e7cf9ae7f2cc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
TEST=Able to build and boot EVE platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there
2) Verify no ACPI error seen while running 'dmesg' from console
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I02df3ddf5ad33d42d97feefb0fa366ad8c856565
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45681
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Able to build and boot ICLRVP platform.
1) Dump and disassemble DSDT to ensure GRXS function implementation
remain unchanged prior and after this CL.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: Iab4690341bc3da5d8eb249da4d407d84f7d4e706
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45680
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also drop gpio_common.h in favor of intelblocks/gpio_defs.h macros.
TEST=Able to build and boot CNL and CML platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I78d712eeba56b9c098dc6a6f11e4e51cb2529b10
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45654
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures that GRXS perform PAD_CFG0_RX_STATE mask first
and then right shift PAD_CFG0_RX_STATE_BIT to get correct GPIO number.
Change-Id: I96611936f70f79e9dc5ee9414ec68cef00d0d13a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45738
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SOC has MAX_CPUS>1 so this is redundant.
Change-Id: Icb4c7551031f4e32e01198261ee9ae9b95f18142
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Nearly every x86 platform uses the same arch for all stages. The only
exception is Picasso. So, factor out redundant symbols from the rest.
Alder Lake is not yet complete, so it has been skipped for now.
Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix typo GPD__SLP_SUSB -> GPD_SLP_SUSB
Change-Id: I2beddb5665dc2f6a28b9c02e240b12da137c1b17
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45685
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Migrate ASL helper function like GRXS, GTXS, STXS, CTXS to ASL 2.0
syntax across CNL, ICL, JSL, SKL.
TEST=Able to build and boot Hatch, EVE and ICLRVP platform.
Dump and disassemble DSDT to ensure GRXS,GTXS etc functions
implementation remain unchanged prior and after this CL.
Change-Id: I0ebf1f86031eae25337d2dbeabb8893d9f19a14b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45677
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also align GPMO ASL function with TGL.
Change-Id: Ia40af2cba9867838a1f99141481a5e78cffa0111
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This resolves a Kconfig warning regarding unmet dependencies.
Change-Id: I9e70a4d333afefcb27c097aa9ce84e5effc0d7c3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Drop lpit.asl from CNL and switch to the common one in the three boards
currently using it.
The only difference between the two is the usage on macros in common
code instead of plain integer values.
Change-Id: Iefbd18db7f4c560dce16c4119fde4f4cfbeafb84
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds configuration support for both of CnviBtCore and
CnviBtAudioOffload.
BUG=b:169045123
TEST=Built and boot up to kernel on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Id4bf41f07c4a53de17e9eb91a8ddfb1083cbf83e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45585
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Naveen M <naveen.m@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, SMBUS support was not required for Apollo Lake, since the
SPD was read inside FSP-M, during memory initialization. However, the
Kontron mAL-10 COMe module contains Nuvoton HWM chip that is connected
to the processor via SMBUS. This patch adds SMBUS common driver support
for Apollo Lake to initialize this HWM.
TEST = After loading the nct7802 module on the Kontron mAL-10 with Linux
OS, we can read the hwm registers, see temperature and fan speed:
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 0: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 1: +52.0°C (high = +110.0°C, crit = +110.0°C)
Core 2: +53.0°C (high = +110.0°C, crit = +110.0°C)
Core 3: +53.0°C (high = +110.0°C, crit = +110.0°C)
nct7802-i2c-0-2e
Adapter: SMBus CMI adapter cmi
in0: +3.35 V (min = +0.00 V, max = +4.09 V)
in1: +1.92 V
in3: +1.21 V (min = +0.00 V, max = +2.05 V)
in4: +1.68 V (min = +0.00 V, max = +2.05 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 1729 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +53.5°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C) sensor = thermistor
temp4: +53.0°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C)
temp6: +0.0°C
Change-Id: I408ef84ede27a45fb057e22b2757fa6e66277ddd
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44475
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer to commit 490546f (soc/intel: rename get_prmrr_size) for details.
Change-Id: I4a83feedcdb337ba9613a07215196bc223fb46d1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45651
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP UPDs for the chipset minimum assertion widths and
power cycle duration per mainboard variants.
* PchPmSlpS3MinAssert: SLP_S3 Minimum Assertion Width Policy
* PchPmSlpS4MinAssert: SLP_S4 Minimum Assertion Width Policy
* PchPmSlpSusMinAssert: SLP_SUS Minimum Assertion Width Policy
* PchPmSlpAMinAssert: SLP_A Minimum Assertion Width Policy
* PchPmPwrCycDur: PCH PM Reset Power Cycle Duration
* Check to avoid violating the PCH EDS recommendation for the
PchPmPwrCycDur setting.
BUG=b:159108661
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I8180d95a2185c3786334e10613f47e77b7bc9d5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44557
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable processor thermal control using PCI dev path function instead of
Device4Enable parameter in devicetree. This change removes the dependency
on Device4Enable in devicetree. We can enable and disable this thermal
control using on and off support with PCI device entry in devicetree.
BRANCH=None
BUG=None
TEST=Built and tested on dedede board
Change-Id: I0463236996ad001af506c9966840b27fe44d60d2
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 77cc3267fc970c710299a164ecbc471f9287d719.
Reason for revert: Breaks quark and also needs breaking down into multiple CLs as commented by Nico on CB:45541
Change-Id: Idf4ca74158df15483856754ee24cc4472a8e09b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Expand the scope of 'common/basecode' directory to keep common
non-IP code block (like acpi, power limit).
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I7a2778704016b501eb20382d4603295cec8375d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45522
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id93aab5630e928ee4d7e957801e15a4cc8739fae
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44594
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Rename do_global_reset() to force_global_reset()
2. Make force_global_reset() function static
3. Implement force_global_reset() into common/reset.c to avoid
dedicated SoC implementation
4. Remove redundant force_global_reset() implementation from
dedicated SoC
5. Make direct call to global_reset() from cse_lite.c
7. Drop CONFIG_HAVE_CF9_RESET_PREPARE Kconfig from APL SoC due
to common reset (soc/intel/common/reset.c) code migration
8. Remove unused function send_global_reset() from SKL me.c due
to common reset code migration
9. Delete heci.c from APL SoC as unused
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I1c5dc8d5606ef28ffaed4a64d90f470ae1ffc2a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
get_prmrr_size does not return the actual PRMRR size but a valid PRMRR
size with repect to the users choice in Kconfig. Thus, rename it from
`get_prmrr_size` to `get_valid_prmrr_size` to avoid confusion about what
it does.
Also fix the broken comment in cpulib.h.
Change-Id: Id243be50acb741f2c3118ddde082743d08983a53
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since PRMRR size can only be set when SGX is enabled and since SGX
depends on PRMRR size >= 32MB, any lower setting (including "Disabled")
is invalid. Drop these settings.
Change-Id: If7a19c7223a0de2e03b7df9184cddf7c9fc87a68
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
PRMRR size shall only be set when SGX is enabled. Make PRMRR depend on
SGX enablement in Kconfig.
Change-Id: I551942fd9cb8e7123d00dbd752abffe24788148c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Defer cse_fw_sync to BS_DEV_RESOURCES boot state so that MRC training
data can be cached before CSE FW Sync and a second MRC training can be
avoided.
BUG=b:168850641
TEST=Build and boot the waddledoo board to OS. Ensure that the memory
training is performed only once.
Change-Id: I0ef5693eaa6ed34dc08c94e5db153f4295578f5f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Enhanced Intel SpeedStep Technology (EIST) and Intel Speed Shift
Technology (ISST) - also know as HWP - are two independent mechanisms
for controlling voltage and frequency based on performance hints.
When HWP is enabled, it overrides the software-based EIST. It does not
depend on EIST, though, but can be enabled on its own.
Break up that currently existing dependency in ACPI generation code.
It was tested that HWP can be enabled and gets used by the Linux pstate
cpufreq driver. With HWP disabled, the frequency does not decrease, even
not in powersave mode. After enabling HWP the frequency changed in
relation to the current workload. (Test device: Acer ES1-572)
Change-Id: I93d888ddce7b54e91b54e5b4fdd4d9cf16630eda
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44137
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMC support was not enabled on Xeon_sp platforms. This involves turning
on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC
specific code. This patch leverages code from the Skylake project and
adds the bare minimum hooks to leverage PMC common code. Most
importantly this enables power management registers located in the PMC
device (under ACPI_BASE_ADDRESS). Access to this device is also needed
for SMM setup and handling.
TEST=build for Tiogapass and enable the following Kconfig options:
select SOC_INTEL_COMMON_BLOCK_PMC
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
select CPU_INTEL_COMMON_SMM
Boot the system and ensure pmbase is programmed. (Look for pmbase in
debug messages). Secondly check that SMIs are enabled by looking at the
debug messages (search for "Enabling SMIs") and verifying in HW by
reading IO port 0x530.
Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
IIO_UDS HOB was searched several times during the creation of DMAR table.
Reduce it to only once to improve boot time.
Both DRHD and ATSR subtable creations involve addition of PCIe bridge
device entries, combine the functions with
acpi_create_dmar_ds_pci_br_for_port().
When looping through ports to create PCIe bridge device entries,
use MAX_PORTS intead of NUMBER_PORTS_PER_SOCKET to improve boot time.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I469cd8473c50e105daeda6c5607592ae7cef6032
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
CPX-SP processor supports X2APIC.
Remove DMAR_X2APIC_OPT_OUT flag from DMAR table.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I63c9feda74c7abb591eac991cb98cdcad8afc158
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45375
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses the common code to avoid violating the PCH EDS
recommendation for the PchPmPwrCycDur setting.
Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses the common code to avoid violating the PCH EDS
recommendation for the PchPmPwrCycDur setting.
Change-Id: Id418480bc779d56ff5586516d9bd99ca15133203
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45029
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Check if CSE is enabled from devicetree.cb
2. Create helper function cse_request_reset()
3. Modify caller function argument cse_request_global_reset()
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The following parameters do nothing else than configuring the
corresponding pads to native mode:
- DdiPortEdp
- DdiPort*Hpd
- DdiPort*Ddc
- GpioDdp*
- SpiGpioAssign
- I2c*GpioAssign
- SerialIoUartDebugEnable
- Gp*GpioAssign
- Uart*GpioAssign
- GpioEnableHdaLink
- AudioLinkDmic*
- AudioLinkSsp*
- GpioEnableHdaSspMasterClock
- AudioLinkSndw*
- SmbAlertEnable
Add the missing special function gpio pad groups for CNL, to be able to
configure them via gpio.h instead having to set various FSP parameters.
The groups and names are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux
(linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places.
Also, see soc/intel/tigerlake for reference.
Change-Id: I59df09c8fd464e75f918455aa1972765abc51459
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
platforms
BUG=b:145958015
TEST= Build Volteer coreboot and boot on Volteer Proto 2 and Delbin.
Cq-Depend:chrome-internal-review:3249528
Change-Id: I0ff896424ab23dba43075c44eb9b2c2c480ccbfb
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This corrects the GPIO community numbers in CNL-LP ACPI code.
Change-Id: I9f13a28d3e8f427859570a4d209304ae8444efd9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45209
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found-by: Klocwork, Pointer soc_config is used uninitialized.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I7e2aa4ef23a68a2ec2ba9d55cf890a7f81e3e278
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found-by: Klocwork, Avoid NULL pointer (ctx) dereference.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I16015b538112e0b125b4a5e145c26263c456953c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45411
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a given PRMRR size is not supported, do NOT brick people's devices.
We don't do that when PRMRRs aren't even supported anyway.
Change-Id: Ib917be873aedbc5e789bb0894fca335b5ee9e2c2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Reorder to be similar to cpx/include/soc/pci_devs.h.
We may be able to merge the files in the future.
Checked TiogaPass with BUILD_TIMELESS=1
Change-Id: I939707cc9e58e23f053156f40df4c21a6072570b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45220
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8fc4e07269175eb2f40655b828e340697a9a892a
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45219
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till romstage
2. Include only required headers into include/soc
3. Add SA EDS document number and chapter number
4. Fill required FSP-M UPD to call FSP-M API
Change-Id: I4473aed27363c22e92e66cc6770cb55aae83e75c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This fixes commit 1b89f5e "Guard options with if-blocks".
The code no longer returns if SGX is disabled, but as the PRMRR
configuration is missing it runs into die().
Tested on Prodrive Hermes: Boots again into Linux.
Change-Id: I6d32ca32b1b53767b2db91305103cd532823a5ca
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch adds a check to avoid violating the PCH EDS recommendation
that the PchPmPwrCycDur will never be smaller than the the SLP_Sx
assertion widths.
This code was initially added for cannonlake and now moving it to common
code since the same check will be used to program the PchPmPwrCycDur
for Jasperlake and Tigerlake.
Change-Id: Ie7d5f54939c5eb1f885d303f75a04958b9d77f4d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45028
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enabling Bus Master isn't required by the hardware, so we shouldn't need
to enable it at all. However, some payloads do not set this bit before
attempting DMA transfers, which results in boot failures.
Replace static sata_final() implementation for BM enabling with generic
pci_dev_request_bus_master() function.
This allows the user to control through Kconfig whether Bus Master
should be enabled.
TEST=Able to boot to OS from SATA device on CML platform.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Icd086184fd6fa9c03c806c857f13fad5a9e78a3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Removed unused header files in chip.h
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Idb9b1ed23df3dbb9dad4d36651064c21a4d913fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
List of changes:
1. Convert inconsistent white space into tab.
2. Group together all MCHBAR offset macros.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Ief13406b0116ce0f0b7472e5b133b3fac06f6e27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
PMC core OS driver (intel_pmc_core.c in linux kernel) provides debug
hooks to developers and end users to quickly figure out why their
platform is not entering a deeper idle state such as S0ix.
Include the common pmc.asl added in commit 957481c.
Test: PMC gets detected by Linux kernel module.
Change-Id: Ibf7c8ba7449df15c2ca30d23791e17fc878204f2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45318
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before MRC code execution, FSP interrogates EMCA MSR registers and other
registers to see if there are fatal errors happened during previous boot
session. If there are, error records are saved into
FSP_PREV_BOOT_ERR_SRC_HOB.
When the value of Length field of FSP_PREV_BOOT_ERR_SRC_HOB is 2, that means
the HOB does not contain any valid error record.
TESTED=Injects MCE error through cscript, reboot into OS, check boot log:
0x75904d70, 0x00000400 bytes: HOB_TYPE_GUID_EXTENSION
5138b5c5-9369-48ec-5b9738a2f7096675: FSP_PREV_BOOT_ERR_SRC_HOB_GUID
================ PREV_BOOT_ERR_SRC HOB DATA ================
hob: 0x75904d88, Length: 0x42
MCBANK ERR INFO:
Segment: 0, Socket: 0, ApicId: 0x0
McBankNum: 0x3
McBankStatus: 0xfe00000000800400
McBankAddr: 0xf0ff
McBankMisc: 0xfffffff0
MCBANK ERR INFO:
Segment: 0, Socket: 0, ApicId: 0x0
McBankNum: 0x4
McBankStatus: 0xfe00000000800400
McBankAddr: 0xfff0
McBankMisc: 0xfffffff0
0x75904d88: 42 00 01 00 00 00 00 00 03 00 00 04 80 00 00 00 B...............
0x75904d98: 00 fe ff f0 00 00 00 00 00 00 f0 ff ff ff 00 00 ................
0x75904da8: 00 00 01 00 00 00 00 00 04 00 00 04 80 00 00 00 ................
0x75904db8: 00 fe f0 ff 00 00 00 00 00 00 f0 ff ff ff 00 00 ................
0x75904dc8: 00 00
Change-Id: Idbace4c2500440b3c1cf2628dd921ca1a989ae81
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44974
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 5KB to 8KB to fix
cbmem buffer overflow issue.
Bug=None
Branch=None
Test=Boot TGLRVP and check cbmem -c | grep 'CBFS: Locating' lists all stages
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I2393cc83008211be8e6a2ca7a1e41a7e9d92caf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45183
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects Cache QoS mask MSR programming flow for Tigerlake SoC.
BUG=b:145958015
TEST= Build and boot to Chrome OS on TGL-UP3 RVP.
Recipe used:
1. Patch https://review.coreboot.org/c/coreboot/+/43494 that
implements calculation of CQOS mask dynamically based on stack
size usage & incorporates Tigerlake SoC specific programming flow.
2. QS Engineering Microcode based on 0x56 Official Microcode with
LLC CQOS change.
3. QS SoC Part
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Change-Id: I602d93eb4f8243ec49993b00691140d9a6cf5733
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update the COS mask calculation to accomodate the RW data as per SoC
configuration. Currently only one way is allocated for RW data and
configured for non-eviction. For earlier platform this served fine,
and could accomodate a RW data up to 256Kb. Starting TGL and JSL, the
DCACHE_RAM_SIZE is configured for 512Kb, which cannot be mapped to a
single way. Hence update the number of ways to be configured for non-
eviction as per total LLC size.
The total LLC size/ number of ways gives the way size. DCACHE_RAM_SIZE/
way size gives the number of ways that need to be configured for non-
eviction, instead of harcoding it to 1.
TGL uses MSR IA32_CR_SF_QOS_MASK_1(0x1891) and IA32_CR_SF_QOS_MASK_2(0x1892)
as COS mask selection register and hence needs to be progarmmed accordingly.
Also JSL and TGL platforms the COS mask selection is mapped to bit 32:33
of MSR IA32_PQR_ASSOC(0xC8F) and need to be updated in edx(maps 63:32)
before MSR write instead of eax(maps 31:0). This implementation corrects
that as well.
BUG=b:149273819
TEST= Boot waddledoo(JSL), hatch(CML), Volteer(TGL)with NEM enhanced
CAR configuration.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I54e047161853bfc70516c1d607aa479e68836d04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The usual structure of these files is a global enable symbol, usually
followed by an if-block which contains all other dependent symbols.
Use this instead of having a `depends on` line to each symbol. Guard all
symbols, even if they originally were not guarded, since they don't do
anything useful unless the global enable option is selected.
Change-Id: If5347187b07a46192f0063011ab197b5047f555f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45043
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include console/uart.h for the declaration of uart_platform_base instead
of declaring the function in the source file.
Change-Id: Ib72d8884f27e93cec058dbcda404dd6908de1981
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The UART index is never negative, so make it unsigned and drop the
checks for the index to be non-negative.
Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
List of changes:
1. Convert inconsistent white space into tab.
2. Group together all MCHBAR offset macros.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I82fc362589389081b1b1856524a972b780af9a13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45256
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the pch_init function to bootblock_pch_init to
maintain the parity with previous generation SoC code block.
Refer to commit 1201696.
Change-Id: Id2a89b2f64b58079062d79e07efbdcfad7ed3d2d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45189
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch converts inconsistent white space into tab.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: If5e191b92e3e53b43335136ef51bc62589b955a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Nothing uses this code anymore.
Change-Id: I5da1020597c126a40b015beb6e43fb0168aa330f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
|
|
They are not referenced anywhere.
Change-Id: Iff2d3b0063da5796e0bff1ada08b0a544c3f9a5a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select
CPU_INTEL_COMMON directly, to avoid dependency problems.
Tested with BUILD_TIMELESS=1: Without including the config file in the
coreboot.rom, both OCP Tioga Pass and Delta Lake remain identical.
Change-Id: I565e75869be730e7c2fe7114b829941bc9890e6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45041
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixes complains about missing INT configuration by the pciexp kernel
modules.
Tested with Linux 5.5 on Prodrive Hermes.
Change-Id: I277f592cd8d2c86a9c7ba4b34d3f703f7d593582
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do
not define MAX_CPUS, which would then default to 1. Since this is most
likely an oversight, use the same value as other Apollo Lake boards.
To ensure this does not happen again, factor out MAX_CPUS to SoC scope.
Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both Gemini Lake boards in the tree use the same value.
Change-Id: Ib6bd05206026736fd7e3d44b49e4d8ba217c2708
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For consistency with other platforms, use `SOC_INTEL_GEMINILAKE`.
Change-Id: I06310e5a9bca6c9504f19a6c2fe9b26626f290d4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
List of changes:
1. Select FSP_HEADER_PATH
2. Select FSP_FD_PATH
3. Select PLATFORM_USES_FSP2_2
4. Select UDK_202005_BINDING
Change-Id: Ic5b09bad3c23b84c6ff6b1ea9e1dc684d7463c27
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Add PCI IDs for Intel's Dynamic Tuning Technology (DTT) for ADL.
Also add NULL terminator at end of pci_device_ids.
Change-Id: If25b1f562567a833683b0b8796bd1d6cac0bd490
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45140
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI IDs for Intel's Image Processing Unit (IPU) for ADL.
Also add NULL terminator at end of pci_device_ids.
Change-Id: I327828d676422fc6162fadffd9b39529ecb89ace
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I456591f63f463c5cec1cbf3c1633bdb61be92d29
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44935
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25cfc61b7a25b68dd22573a88933e03931a755ef
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Guckian <d.guckian20@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
FSP v3333 or later, provides a new UPD to Skip configuring
GPIO settings from FSP. coreboot should provide all the
required GPIO configuration for the platform when this UPD
is set.
BUG=b:166790597, b:146390704
BRANCH=none
TEST=build and boot volteer proto2
Cq-Depend:chromium-internal:3240396,chromium-internal:2870145
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: If32f35a188d510db8e4d8973cae78297d49a9240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44913
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|