summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2016-06-09soc/intel/quark: Pass serial port address to FSPLee Leahy
Pass the serial port address to FSP using a UPD value in the MemoryInit API. TEST=Build and run on Galileo Gen2 Change-Id: I86449d80310b7b34ac503ebd2671a4052b080730 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15079 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-08soc/apollolake: Add SOC specific c-state tableHannah Williams
Please refer Apollolake BIOS Writers Guide Change-Id: I5f82cdc4b34a53b5184ef1e918cae15a1df6cc5e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15051 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-08soc/intel/common: Add common code for acpi c/p/t-state entriesHannah Williams
Change-Id: I87505bb31cd1b46d27cc5c9ba8d086df7393653e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15050 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-07soc/intel/apollolake: Add missing DRAM density constantsAndrey Petrov
Add missing constants for DRAM density. This resolves boot issue, because misconfigured density results in incorrect memory mapping. Change-Id: I3bad911bf406bfc5677059490d0e89fcbf735b70 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15059 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-06-06intel/skylake: Fix typo in commentPaul Menzel
Correct the spelling of *firmware* in a comment. Change-Id: I44bcd95f754ff839d582dc2150e1883a6315da9e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/15078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-04soc/apollolake: Put CSE to low power stateHannah Williams
fsp_notify(END_OF_FIRMWARE) should be sent to FSP to enable putting CSE in low power state Change-Id: I76b8e85ccf077032616ba8e4a333d9264dc65ed2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15054 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-04soc/apollolake/pmc: Store the ACPI bar during set_resources stageAlexandru Gagniuc
Because the resource for the ACPI BAR is fixed, pci_dev_set_resources does not store it to the device. This means we need to do part of the dance to get the ACPI IO region to work after coreboot. Of course, this BAR can be destroyed later by the OS probing it, but at least we try to get it working out of coreboot. Change-Id: Ibff18d30936f94d4f149a89313254531365f43e6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/15048 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03intel/fsp_baytrail/i2c: mask i2c interrupts in i2c_init()Ben Gardner
i2c_init() leaves the I2C device enabled. Combined with the default interrupt mask (0x8ff) and the fact that the interrupt line is shared, this leads to an interrupt storm in the OS until a proper I2C driver is loaded. This change clears the interrupt mask to prevent the interrupt storm. Change-Id: I0424a00753d06e26639750f065a7a08a710bfaba Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/15047 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-06-03intel/apollolake: Clear TSEG reg early in bootblockFurquan Shaikh
TSEG register comes out of reset with a non-zero default value. This causes issues when cbmem_top returns non-zero value based on TSEG read before DRAM is initialized. Thus, clear TSEG reg early in bootblock to avoid unwanted side-effects. Change-Id: Id3c6c270774108e4caf56e2a07c5072edc65bb58 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15049 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-02intel/apollolake: Add car.c to verstageFurquan Shaikh
Verstage on apollolake requires the functions defined in car.c to perform flush of l1d to l2 on loading romstage into CAR. Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01soc/apollolake: remove _RMV and _DSW methods from xhci.aslHannah Williams
Change-Id: Ic314656f34fda10e58e55bdefeb0a1f0c6ab5ae2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-06-01intel/apollolake: Add support to enable google ChromeECShaunak Saha
ChromeEC is needed for EC controlled features to work properly. This patch adds neccessary support in soc/intel so that mainboard asl files can include the ChromeEC e.g. PNOT method and LPCB and also the nvs fields. BUG = 53096 TEST = This patch is needed by the mainboard specific ASL change to include src/ec/google/chromeec/acpi/ec.asl Change-Id: Icecc437df05cd3efb41579317a353fd22526e0c9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/14967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01soc/intel/apollolake: add support for IFWI regionFurquan Shaikh
On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31quark: Enable HSUART0 as consoleLee Leahy
The use of HSUART0 on galileo requires early initialization of the I2C GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1 on the expansion connector. TEST=None Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Move UART init into romstage.cLee Leahy
Move UART initialization into romstage.c and eliminate uart.c. TEST=Build and run on Galileo Gen2 Change-Id: I5f2c9b4c566008000c2201c422a0bba63da64487 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15009 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Split I2C out from driverLee Leahy
Split out the I2C code to allow I2C transactions during early romstage. TEST=Build and run on Galileo Gen2 Change-Id: I87ceb0a8cf660e4337738b3bcde9d4fdeae0159d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Set temporary I2C base addressLee Leahy
Set a temporary I2C base address during romstage. TEST=Build and run on Galileo Gen2 Change-Id: I4b427c66a4e7e6d30cc611d4d3c40bb0ea36066d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Conditionally define BIT namesLee Leahy
Only define BIT names if they are not already defined. TEST=Build and run on Galileo Gen2 Change-Id: Ief4c4bb7a42a1bb2a7f46f13dc9b8bbb4d233e3c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Fix reg_script displayLee Leahy
Remove extra ": " following reigster type. TEST=Build and run on Galileo Gen2 Change-Id: I57dd40a540d7b5371a6c45174f47a311b83a2aab Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14948 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Clear SMI interrupts and wake eventsLee Leahy
Migrate the clearing of the SMI interrupts and wake events from FSP into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: Ia369801da87a16bc00fb2c05475831ebe8a315f8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Rename pmc.c to lpc.cLee Leahy
Rename the file pmc.c to lpc.c to prepare for further additions. TEST=Build and run on Galileo Gen2 Change-Id: If98825d72878f0601f77bff8c766276dbda8a9ae Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14946 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Add PCIe reset supportLee Leahy
Migrate PCIe reset from PlatformPciHelperLib in QuarkFspPkg into coreboot. Change-Id: I1c33fa16b0323091e8f9bd503bbfdb8a253a76d4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14944 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/apollolake: Update SPI memory mapping constraintsAndrey Petrov
MMIO region of 256 KiB under 4 GiB is not decoded by SPI controller by hardware design. Current code incorrectly specifies size of that region to be 128 KiB. This change corrects the value to 256 KiB. Change-Id: Idcc67eb3565b800d835e75c0b765dd49d1656938 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14979 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-31skylake: Add SD card device to configure card detect GPIODuncan Laurie
Add a PCI driver for the skylake SD card device and have it generate an entry in the SSDT for the card detect GPIO if it is provided by the mainboard in devicetree. This sets up a card detect GPIO configuration that will trigger an interrupt on both edges with a 100ms debounce timeout and can wake the SD controller from D3 state. The GpioInt() entry is bound to the "cd-gpio" device property which will be consumed by the kernel driver. The resulting ACPI output in the SSDT will be combined with the SDXC device declaration in the DSDT. Example: Scope (\_SB.PCI0.SDXC) { Name (_CRS, ResourceTemplate () { GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 10000, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 35 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "cd-gpio", Package () { \_SB.PCI0.SDXC, 0, 0, 1 } } } }) } Change-Id: Ie4c1bfadd962cf55a987edb9ef86e92174205770 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Cleanup formatting in pci_devs.hDuncan Laurie
Minor cleanups in pci_devs.h for indentation and newlines to be consistent throughout the file. Change-Id: I522df141a6b33d918cfb3de1b9019c0c4a73e3e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14994 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add Audio DSP deviceDuncan Laurie
Add the Audio DSP device for skylake as a PCI driver with a static scan_bus handler so generic devices can be declared under it. This is for devices like the Maxim 98357A which is connected on the I2S bus for data but has no control channel bus and instead just has a GPIO for channel selection and power down control and needs to describe that GPIO connection to the OS via ACPI. Change-Id: Iae02132ff9c510562483108ab280323f78873afd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add I2C devicesDuncan Laurie
Add the I2C devices to skylake with the scan_bus handler for SMBUS devices so that I2C-based devices can be declared in devicetree.cb and get initialized properly during ramstage. This does not yet provide the I2C driver, but it allows for devices that are declared in devicetree.cb to provide ACPI tables to the OS. Change-Id: I9dfe4a06a8b0bc549a2b0e2d7c033c895188ba30 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14992 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add GPE header file to chip.hDuncan Laurie
Add the GPE header file to skylake chip.h so the SOC-defined macros for the various GPE values can be used in devicetree directly. For example: chip drivers/i2c/touchpad register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end Change-Id: Ic322108561b34aa34a24a4daba6ba7a4f7a3f9a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14991 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27soc/intel/apollolake: provide SMM dependency requirementsAaron Durbin
Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-27soc/intel/apollolake: add support for verstageAaron Durbin
There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-26soc/intel/apollolake: Provide No Connect macro for unused PadJagadish Krishnamoorthy
Change-Id: Iba506054a3d631c8e538d44e1ca6877dd02c2ca9 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14956 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/intel/apollolake: enable RTCJagadish Krishnamoorthy
BUG=none TEST=Boot to OS and verfiy if rtc0 device is created under /sys/class/rtc/ Change-Id: Idec569255859816fda467bb42a215c00f7c0e16e Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/14883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake: Use simpler macros for the northbridge PCI deviceAlexandru Gagniuc
The NB_DEV_ROOT macro, is almost unreadable, as it depends on other stringified macros, and acts differently depending on the coreboot stage. For ramstage, it also hides a function call. Rewrite the macro in terms of more basic and readable macros. Change-Id: I9b7071d67c8d58926e9b01fadaa239db1120448c Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14890 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake/memmap: Switch to SIMPLE_DEVICE APIAlexandru Gagniuc
memmap.c functionality is designed to be used in more than ramstage. Therefore, it cannot use ramstage-specific APIs. In this case, the SIMPLE_DEVICE API offers a more consistent behavior across stages. Change-Id: Ic381fe1eb773fb0a5fb5887eb67d2228d2f0817d Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14953 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake: Add ish_enable in soc_intel_apollolake_configHannah Williams
Also initialize IshEnable in Silicon Init UPD with the value from devicetree.cb Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I8f57a7353471cc3efa21c7011cdd0b369d25275d Reviewed-on: https://review.coreboot.org/14894 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-25soc/apollolake: Enable Wake from USB devicesHannah Williams
Change-Id: Ib0b30a5779681488e80000a2570fc2fd4c69e908 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/apollolake: SOC specific SMM codeHannah Williams
Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/intel/common: Add common smihandler codeHannah Williams
Provide default handler for some SMI events. Provide the framework for extracting data from SMM Save State area for processors with SMM revision 30100 and 30101. The SOC specific code should initialize southbridge_smi with event handlers. For SMM Save state handling, SOC code should implement get_smm_save_state_ops which initializes the SOC specific ops for SMM Save State handling. Change-Id: I0aefb6dbb2b1cac5961f9e43f4752b5929235df3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-25soc/intel/quark: Add USB device port supportLee Leahy
Add initialization for the USB device port. TEST=Build and run on Galileo Gen2 Change-Id: Icf83747f778f6e1ac976cd448a94311030e79e4f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-23soc/intel/quark: Add EHCI errataLee Leahy
Move the EHCI errata from QuarkFSP into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: I424ffd81643fbba9c820b5a8a6809b9412965f8d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14940 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-23soc/intel/quark: Rename usb.c to ehci.cLee Leahy
Rename usb.c to ehci.c since it contains EHCI specific content. TEST=Build and run on Galileo Gen2 Change-Id: Ifdb7cd937b1dffda1959b76e1c911ffd93f53cb6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14939 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-23soc/intel/quark: Switch reference from uart_dev to uart_bdfLee Leahy
Switch from using uart_dev to uart_bdf to better describe the value in use. TEST=Build and run on Galileo Gen2 Change-Id: If5066b93ea8ccce4a5b89ee3984c7413d5358e71 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14938 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-23soc/intel/apollolake: add support for writing logical boot partition 2Aaron Durbin
On apollolake the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. There's also a sort of recovery mechanism where there is a second data structure with similar contents halfway through the "BIOS" region. This second structure is referred as the logical boot partition 2 (LBP2), and it's optionally employed. Add support for writing the LBP2 to a specified FMAP region to accommodate platforms which require it. Change-Id: I1959a790f763b409238dea6b62408b42122e590e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14924 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-21apollolake: Add handler for finding ACPI path for GPIODuncan Laurie
Add a handler for soc/intel/apollolake to return the ACPI path for GPIOs. There are 4 GPIO "communities" on apollolake that each have a different ACPI device so return the appropriate name for the different communities. Change-Id: I596c178b7813ac6aaeb4f2685bb916f5b78e049b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14859 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-21skylake: Add handler for finding ACPI path for GPIODuncan Laurie
Add a handler for the Intel Skylake SOC to return the ACPI path for GPIOs. Since all GPIOs are handled by the same controller they all have the same ACPI path and this is a simple handler that just returns a pointer to the GPIO device that is defined in the DSDT. Change-Id: I24ff3a6f2479d9e7eeace65d49e2f6c2e070f3e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14843 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-21skylake: Add ACPI device name handlerDuncan Laurie
Add a global ACPI device name handler for the Skylake SOC that will translate skylake device paths into an ACPI path that matches the device objects delcared in the DSDT at soc/intel/skylake/acpi/*. The skylake implementation uses a global acpi_name handler for the SOC and it is not necessary to add a function to every device. This function is used by device drivers calling acpi_device_name() and acpi_device_path() to generate ACPI AML in the SSDT. Change-Id: I31cecf7905a51224e7bfc40c6c4ad2487f039097 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14841 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-19soc/intel/apollolake: Relocate FSP-M during insertion in CBFSAndrey Petrov
Since FSP-M is run in CAR (as opposed to XIP), its default link address may need to be changed. Since cbfstool can relocate FSP blobs, take advantage of that feature. Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-19soc/apollolake/romstage: Add a timestamp at the start of romstageAlexandru Gagniuc
Change-Id: Idcfaba08e4705c6219a46dd615ae8b456a8ab5b4 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14865 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-19soc/apollolake/romstage: Call console_init before any printk()Alexandru Gagniuc
Follow the convention used on all other platforms and explicitly call console_init() before any printk(). This call was most likely ommitted by accident during rebase. Also remove the "Starting romstage..." message, as console_init() will print a standardized message. I don't have details on how this message originally appeared. Change-Id: Id91f0fc15ecbd3635d67a261907f4c6af9a499ab Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14864 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-19soc/apollolake: Pass earliest timestamp to timestamp_initAlexandru Gagniuc
We have a timestamp from before cache-as-ram setup saved in the MMX registers. Recover that timestamp, and use it as the base timestamp rather than letting lib/bootblock.c use a late timestamp. This allows more accurate profiling of the boot flow, since CAR setup time is no longer excluded from the timing information. Change-Id: I055092c600438c5260ab67509434a38f1eb77fe4 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14863 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-19soc/intel/apollolake: clear up ACPI timer emulation magic constantAaron Durbin
The timer emulation works by deriving a frequency based off the Common Timer Copy with a frequency of 19.2MHz. The desired frequency = (19.2MHz * multiplier) >> 32; With that knowledge update the code to let the compiler perform the necessary math based on target frequency. Change-Id: I716c7980f0456a7c6072bbaaddd6b7fcd8cd5b37 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14889 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-19soc/apollolake/lpc_lib: Make cros compile passZhao, Lijian
The print of size_t can pass upstream jenkins, but fails with CROS_SDK enviornment, "%z" fits for size_t anyway. Change-Id: Ic8dbab240463f2e484b73d55e21985fae2b0d9b7 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/14835 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-18soc/intel/apollolake: Enable ACPI PM1 timer emulationAndrey Petrov
Enable emulation for ACPI PM1 timer. This is needed by FSP-M MemoryInit. Change-Id: I7a441f5f1673e6430697615ae7251da948e77548 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14821 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/apollolake: Remove hardcode for TCO watchdog timerAndrey Petrov
Change-Id: Ie528b0ee3d447dcb819ccb7c0f832885da0f4257 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14820 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-18soc/intel/apollolake: Work around FSP-M CAR layoutAndrey Petrov
As of now FSP-M can not be relocated and it can not be instructed to use a specific resource for temporary memory. As result coreboot is forced to use CAR layout dictated by default FSP-M configuration. Change CAR size to 1MiB, link romstage at such CAR address so it doesn't overlap with FSP-M's default heap/stack. Change-Id: I56f78f043099dc835e294dbc081d7506bfad280d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14804 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-18soc/intel/apollolake: Do not use StackBase FSP-M parameterAndrey Petrov
Currently, StackBase field doesn't work and changing it from default value leads to crash. Change-Id: Id3f3ea9a834d0c04a8381938535109d6a729cca2 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14803 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/apollolake: Take advantage of common opregion codeAndrey Petrov
Change-Id: I2d16336513bcd5a0544a6b68b609e40dd7c141fb Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14807 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/common: Add IGD OpRegion supportAndrey Petrov
Add helper function that fills OpRegion structure based on VBT file content and some reasonable defaults. Change-Id: I9aa8862878cc016a9a684c844ceab390734f3e84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/common: Add utility to load VBT fileAndrey Petrov
Change-Id: I8d3d47ca2fc1fc4c10e61c04b941b6378b9c0f80 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14815 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/quark: Add I2C supportLee Leahy
Add the I2C driver. TEST=Build and run on Galileo Gen2 Change-Id: I53fdac93667a8ffb2c2c8f394334de2dece63d66 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14828 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17soc/intel/quark: Fix spelling errorLee Leahy
Change Memroy to Memory in comment. TEST=None Change-Id: Ic57fcf962be6a302dcd7b52b9256a182577e734b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14881 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17soc/intel/quark: Perform GPIO initializationLee Leahy
Set the base address and enable the GPIO and legacy GPIO controllers. Call the mainboard routine to initialize the GPIO controllers. TEST=Build and run on Galileo Gen2 Change-Id: I06aed5903d6655d2a0948fb544cf9e0db68faa26 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14827 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17intel/sch: Merge northbridge and southbridge in src/socStefan Reinauer
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-05-17soc/intel/quark: Add GPIO register accessLee Leahy
Add register access routines for the GPIO and legacy GPIO controllers. TEST=Build and run on Galileo Gen2 Change-Id: I0c023428f4784de9e025279480554b8ed134afca Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14825 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17soc/intel/quark: Add LPC symbolsLee Leahy
Add LPC_DEV and LPC_FUNC symbols TEST=Build and run on Galileo Gen2 Change-Id: I8485e2671af439f766228d4eaf9677c2ff8ff3f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14880 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17soc/intel/quark: Reformat include/soc/pci_devs.hLee Leahy
Replace # define with #define Align the right hand column to prepare for further expansion TEST=Build and run on Galileo Gen2 Change-Id: Ie4d9fb56d52d7291be5523d31c1d3aa51f94dcd6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14879 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17soc/intel/quark: Add Ioh.h from EDK-IILee Leahy
Add Ioh.h from EDK-II to enable easy comparisons between EDK-II and coreboot implementations. TEST=Build and run on Galileo Gen2 Change-Id: I9320101a4a2c16ed18f682f3d04623c54afb52fd Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14824 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-05-13soc/intel/apollolake: provide common LPDDR4 memory initAaron Durbin
Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14790 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-13soc/intel/apollolake: implement common gpio APIAaron Durbin
In order for apollolake mainboards to utilize the common GPIO API it actually needs to be implemented. Change-Id: I41de8d5d9f3c39e7e796eae73b01cb29e9c01347 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14797 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-12soc/intel/apollolake: use common FADT infrastructureAaron Durbin
Instead of having the mainboards duplicate the same boilerplate code utilize the common FADT infrastructure to reduce duplication. Change-Id: If824619fd619433974e588050a933d2c19b97ec8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14779 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-12soc/apollolake: Handle non-standard ACPI BAR in PMC deviceAlexandru Gagniuc
The ACPI BAR (BAR2 - offset 0x20) is not PCI compliant. That means that probing may not work. In that case, a resource still needs to be created for the BAR. BONUS: We now avoid the need to declare the MMIO resources as fixed. Change-Id: I52fd2d2718ac8013067aaa450c5eb31e00738ab9 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14634 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/intel/apollolake: Write LB_FRAMEBUFFER table when appropriateAlexandru Gagniuc
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to be done in platform code. Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/intel/common/mrc_cache: Don't assume FMAP is tied to CHROMEOSAlexandru Gagniuc
The old code only checked for an RW_MRC_CACHE region when CONFIG_CHROMEOS was selected. This assumption is not necessarily true, as one can have FMAP without a CHROMEOS build. As a result, always search FMAP first before falling back on CBFS for locating the MRC cache region. The old logic where CHROMEOS builds would fail when RW_MRC_CACHE was not found is preserved, such that behavior does not change. Change-Id: I3596ef3235eff661af055968ea641f3e9671cdcd Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14757 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/apollolake/uart.c: Do not NOOP .set_resources() and friendsAlexandru Gagniuc
When SOC_UART_DEBUG was not set, the boot would hang somwhere in ramstage, as evidenced by POST codes reported from the EC. This was traced to the .set_resources and .enable_resources members of the UART PCI driver being set to NOOP. Although the exact mechanism of failure is not known, this change eliminates the hang. Change-Id: Ic2f3d56a964ec890ebfa1e1a7770f1ae2eb22281 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14771 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-11soc/intel/quark/include/soc: Update the Intel licenseLee Leahy
Remove the phrase "which accompanies this distribution" from the license. Re-format the license to fit in 80 columns. TEST=Build and run on Galileo Gen2 Change-Id: I8d893cf1270b95b27eab7142b276ebfce24ec2ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14774 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10intel/common/mma: override SAGV to fixed high for MMA testsPratik Prajapati
Set SAGV to 2 (Fixed High) so that MMA test would stress memory at high freq point. MMA tests does not support stressing memory at both high and low points. BRANCH=glados BUG=chrome-os-partner:43731 TEST=Build and Boot kunimitsu and ran MMA tests. Change-Id: I0b2f6cf9955076f6146b957c4d40fe24e6c3f0e7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b16b756d9a74c9111c78fce848b059daee65669 Original-Change-Id: I4c4a59407844e1986fa2cf3a0035aff1d8529cf9 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339002 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-(cherry picked from commit c43d9880fe4efd1e1bb853d35140424fb7dd7e99) Original-Reviewed-on: https://chromium-review.googlesource.com/338847 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10util/mma: changing BOOT_STUB to COREBOOT region and few more thingsPratik Prajapati
(1) Added following new function. cbfs_locate_file_in_region - to locate (and mmap) a file in a flash region This function is used to look for MMA blobs in "COREBOOT" cbfs region (2) mma_setup_test.sh would write to "COREBOOT" region. (3) changes in mma_automated_test.sh. Few MMA tests need system to be COLD rebooted before test can start. mma_automated_test.sh would do COLD reboot after each test, and so i would sync the filesystem before doing COLD reboot. BRANCH=none BUG=chrome-os-partner:43731 TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS Not tested on Glados. Change-Id: I8338a46d8591d16183e51917782f052fa78c4167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4 Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331682 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/14125 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10soc/intel/apollolake: remove errant semicolonAaron Durbin
Remove a semicolon which shouldn't be there. Change-Id: I38f785fa13ea9fee91813f165a085ff54e1b75fb Found-by: Coverity Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14755 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-05-09soc/intel/apollolake: Select no stage caching for resumeFurquan Shaikh
Select NO_STAGE_CACHE so that ramstage is not cached for resume. Change-Id: I9ca71686e0f617bb24713ec9ba07b5255c218f66 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09soc/apollolake/pmutil: Get PMC base address dynamicallyAlexandru Gagniuc
Instead of using a hardcoded address for PMC device BAR0, read it dynamically. This allows the allocator to move the BAR without needing a fixed resource. Note that we cannot do the same for the ACPI BAR (index 0x20), as it cannot be read back. Change-Id: If43e1ccb693ffb17b78bdd76140a0849493a0010 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14633 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09soc/intel/quark: Identify the console UARTLee Leahy
Pass the UART identifier to CorebootPayloadPkg Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: I9db1c31c3544d56b66f5a79ac8c3acee41788983 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
Command List: Send command for PS4 exit fails BUG=chrome-os-partner:52355 BRANCH=glados TEST=Build and boot lars and verify no hang during active idle CQ-DEPEND=CL:*257305 Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368 Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341330 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14688 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09soc/intel/skylake: Output more ME status informationDuncan Laurie
Output a few more status bits from HFS/HFS2 and add some interesting bits from HFS3. BUG=chrome-os-partner:52662 BRANCH=glados TEST=boot on chell and verify ME status output Change-Id: I989b680f203678dbe28559e858faf8b4e0837481 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ea34ab019da3fff965102bcef5158ddcc154728 Original-Change-Id: Iff977c8d85b4d4dfa00b5b19bc29d11813a99b9f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340390 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/14687 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-09xip: Do not pass --xip for early stages if CAR supports code executionFurquan Shaikh
On modern x86 platforms like apollolake, pre-RAM stages verstage and romstage run within the cache-as-ram region. Thus, we do not need to pass in the --xip parameter to cbfstool while adding these stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is default false for all x86 platforms. Apollolake selects this option since it supports code execution with CAR. Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/apollolake/lpc: Allow configuring SERIRQ via devicetreeAlexandru Gagniuc
Every other SOC uses a CONFIG_* flag to enable or disable SERIRQ continuous mode. Why they do that is beyond me, but the way we implement it on apollolake is via devicetree. Change-Id: I6e05758e5e264c6b0015467dd25add3bffe2b040 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc_lib: Add utility to configure LPC padsAlexandru Gagniuc
Change-Id: Iaf325863681ad9b8b5d7662a9d267488b8fdf008 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14587 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc: Open I/O to LPC based on resource allocationAlexandru Gagniuc
Besides a number of fixed memory windows, Apollolake supports opening a configureable 64 KiB MMIO window, as well as four PMIO windows to the LPC bus. Open up these windows dynamically, based on how resources were allocated to the child LPC devices. Change-Id: I170e861693cb6fd1be38889adc951f197a13460f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14584 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06Revert "soc/intel/apollolake: Enable LPC bus interface"Alexandru Gagniuc
This reverts commit e976bd44692d2adb320a1256f1b6bfaa6469108a. The LPC resource allocation will be completely reworked in subsequent patches. The most straightforward approach is to start by reverting the existing code. Change-Id: I2475542b79817020d4c956f22ed5856f05046b16 Reviewed-on: https://review.coreboot.org/14583 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/intel/apollolake: fix incorrect bdsm -> tolud memory resourcesAaron Durbin
The wrong base address was being used for the region of memory between BDSM and TOLUD. This resulted in a very large reserved region starting at TOLUD instead of BDSM. Change-Id: I41d06267ffa93ea47aa059f4ddb7b9c349e51583 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14628 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/intel: indicate to build system that XIP_ROM_SIZE isn't usedAaron Durbin
The XIP_ROM_SIZE Kconfig variable isn't used for these chipsets. Therefore, indicate as such so that romstage can be placed in cbfs less rigidly. Change-Id: If5cae10b90e05029df56c282e8adf37fa0102955 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14626 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06{cpu,soc}/intel: remove unused smm_init() functionAaron Durbin
There used to be a need for an empty smm_init() function because initialize_cpus() called it even though nothing called initialize_cpus(). However, garbage collection at link time is implemented so there's no reason to provide an empty function to satisfy a symbol that is completely culled during link. Remove it. Change-Id: Ic13c85f1d3d57e38e7132e4289a98a95829f765a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14605 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/skylake: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I5c4674ed258922b6616d75f070df976ef9fad209 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14597 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/broadwell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I74c81c5d18dff7a84bfedbe07f01e536c0f641fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14595 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-06soc/intel/apollolake: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I8cfb5ba6f6a31fecde2ce3bf997f87c4486ab3ab Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14594 Tested-by: build bot (Jenkins) Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/braswell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I65beefec53a29b2861433bc42679f3fa571d5b6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14593 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/fsp_broadwell_de: convert to using common MP initAaron Durbin
In order to reduce duplication of code use the common MP initialization flow. Change-Id: I2a7c628cfae7cf6af6e89fa8fc274f59127ff7c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14592 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-05-06soc/intel/apollolake: Correct PCI write size in romstageFurquan Shaikh
1. PCI command reg write should be 16-bit. 2. HPTC reg write should be 8-bit. Also, use macros instead of hard-coded values. Currently, the macros are defined in romstage.c, but if more P2SB macros are added, it would be good to move them to a separate header file. Change-Id: Iad1eb6a95467a41ecf454092808d357425c4c2fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14613 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-05soc/intel/quark: Add script time delay supportLee Leahy
Add time delay support to the scripts. TEST=Build and run on Galileo Gen2 Change-Id: I2c87977e2a2547e00769e59e1ee81fbbb5dff33f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-05soc/intel/quark: Add temperature sensor supportLee Leahy
Migrate the temperature sensor support from QuarkFspPkg into coreboot. TEST=Build and run on Galileo Gen2 Change-Id: I6dc68c735375c9d1777693264674521f67397556 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14565 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>