Age | Commit message (Collapse) | Author |
|
This change gets rid of unused dev param to pmc_set_afterg3.
BUG=b:136861224
Change-Id: I861bb132acf113c9d306175b670bf4a1ff742c28
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets
removed from the root bus as leftover unused device. With change
903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses
of dev_find_slot() were replaced by pcidev_path_on_root() which relies
on scanning of root bus to find the requested device. Since PMC device
is removed from the root bus, pcidev_path_on_root() returns NULL for
it thus resulting in configuration being skipped for the PMC
ultimately resulting in S3 failures.
Since the PCH_DEV_PMC was just used to get to chip config, this
change replaces the use of PCH_DEV_PMC with SA_DEV_ROOT.
BUG=b:136861224
Change-Id: Id68db8382b7b98e8e2e4a65ded1a6fb3bd057051
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change gets rid of unused dev param to pmc_set_afterg3.
BUG=b:136861224
Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets
removed from the root bus as leftover unused device. With change
903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses
of dev_find_slot() were replaced by pcidev_path_on_root() which relies
on scanning of root bus to find the requested device. Since PMC device
is removed from the root bus, pcidev_path_on_root() returns NULL for
it thus resulting in configuration being skipped for the PMC
ultimately resulting in S3 failures.
Since the PCH_DEV_PMC was just used to get to chip config, this change
replaces the use of PCH_DEV_PMC with SA_DEV_ROOT.
BUG=b:136861224
TEST=Verified that S3 works fine on hatch.
Change-Id: Ie5ade00ac2aca697608f1bdea9764b71c26e2112
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Similar to CB:33940, fix outb orders.
Change-Id: I1d35235abc7e02e6058f07809b738635861cc9e4
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jackpot51@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
outb accepts a value followed by a port
Change-Id: I6fe3961b4f8cb2454e3b2564c3eae6af06c9e69d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33940
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix
*** Pre-CBMEM romstage console overflowed, log truncated! ***
issue.
TEST=Verified on Hatch CML platform.
Change-Id: I2de4ca2f2001b304850c27df1b3c3b2c827fe25a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Spoorthi K
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
As per EDS Sata port implemented register is byte width (bits[3:0]) hence
converting required DWORD based read/write to BYTE width read/write.
TEST=Able to boot from SATA device on CML hatch.
Change-Id: I545b823318bae461137d41a4490117eba7c87330
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the values used for GPIO_CFG and MISCCFG were not correct,
causing GPEs to not work correctly. This adjusts them according to the
values found in the original ACPI tables for the System76 Gazelle.
Unfortunately, the Intel documentation[1] mentioned below is
also incorrect. I have mentioned this to Intel already. The source
for the Intel CoffeeLake FSP also confirms these new numbers.
This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for
its GPE and GPP_K6 is used for the lid switch GPE. Both function
correctly after applying this change.
[1] Intel Document #572235:
Intel ® 300 Series Chipset Families
Platform Controller Hub
External Design Specification (EDS) - Volume 2 of 2
Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
While running the s0ix cycling test, we observed SMM Handler caused
a stack overflow. This error happens during event log access.
This change is to increase the SMM_MODULE_STACK size to 0x800
BUG=b:135551854
TEST=suspend_resume test pass 500+ cycles, originally issue happenes
within 150 cycle
Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
To call dev_find_slot(0, xx) in romstage can produce
invalid results since PCI bus enumeration has not
been progressed yet.
Replace this with method that relies on bus topology
that walks the root bus only.
Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
With VBOOT=y && VBOOT_MEASURED_BOOT=y message
digest will be allocated from the stack and
1 KiB reserve used with the recent platforms
was no longer sufficient.
The comment of LZMA scratchpad consuming stack
was obsolete for postcar, so these can be reduced
to same 4 KiB.
Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b.
It was merged prematurely with some vague argumentation in the commit
message and not all issues of reviewers were addressed.
Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This also corrects some CPU naming in comments.
Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If50d9218119d5446d0ce98b8a9297b23bae65c72
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33816
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enhance elog wake source information with more details about which USB port
resulted in a wake from S3 or S0ix.
BUG=b:123429132
BRANCH=none
TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference
libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch
coreboot chromeos-bootimage``
Ensure /build/hatch/firmware/image-hatch.serial.bin has been built.
Plug a keyboard into a USB port on the DUT.
Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via
servo).
On the console, run ``powerd_dbus_suspend``.
Wait for the DUT to enter low power mode.
Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
Press a key on the USB keyboard.
The DUT wakes up.
On the console, run ``mosys eventlog list`` and look for the wake source.
156 | 2019-06-26 09:46:07 | S0ix Enter
157 | 2019-06-26 12:14:05 | S0ix Exit
158 | 2019-06-26 12:14:05 | Wake Source | Internal PME | 0
159 | 2019-06-26 12:14:05 | Wake Source | GPE # | 109
Program image-hatch.serial.bin into the DUT using flashrom.
Repeat the ``powerd_dbus_suspend``, ``powerinfo``, ``mosys eventlog list``
sequence.
12 | 2019-06-26 14:52:23 | S0ix Enter
13 | 2019-06-26 14:53:07 | S0ix Exit
14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3
15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109
Change-Id: Ie9ef870e219733dea9806c766f5351db25689b32
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I28c2beca4bc26ddb896e68886571ebdc82276b48
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Instead of maintaining this in 3rdparty/blobs use the
3rdparty/intel-microcode which is maintained by Intel.
This allows for some finegrained control where family+model span
multiple targets.
Microcode updates present in
3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those
contain updates not present in the Intel repo. Those are presumably
early CPU samples that did not end up in products.
The following MCU are get a new revision:
old:
sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552
sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528
sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288
sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312
sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728
sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384
sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336
sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280
sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304
sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432
sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328
new:
sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP sets the use of the 8254 timer via the Enable8254ClockGating
UPD, which defaults to enabled, overriding what is set by coreboot.
Per the FSP integration guide, this UPD needs to be disabled when
a legacy OS is booted (ie, when SeaBIOS is used as the payload).
Add a Kconfig option to set the UPD properly based on payload
selection, and remove the existing coreboot code in lpc.c since
it is either ineffective or being overridden by FSP.
Test: build/boot out-of-tree WHL board with both SeaBIOS and
Tianocore, ensure 8254 timer usage set correctly for each.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
SOC_INTEL_CANNONLAKE
This allows to use Kconfig options to differentiate between SOC
variants.
Change-Id: Ica11c68377e3d0dc8a8f48198e01a74d7bebe642
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33559
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The value for that macro should be 1<<19. This is confirmed by the
Intel doc and also by N_PCH_GPIO_RX_SCI_ROUTE.
See Intel Atom® Processor C3000 Product Family Datasheet
(February 2018) :
https://www.intel.com/content/www/us/en/products/docs/processors/atom/c-series/c3000-family-datasheet.html
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Change-Id: I808d9131032a9796d837e00ad6fb3369b792e597
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33573
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ifittool is used instead. Drop old code.
Change-Id: I70fec5fef9ffd1ba3049badb398783f31aefb02f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This patch relying on new rule, ENV_PAYLOAD_LOADER which is set
to ENV_RAMSTAGE.
This approach will help to add future optimization (rampayload) in
coreboot flow if required.
Change-Id: Ib54ece7b9e5f281f8a092dc6f38c07406edfa5fa
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
The DIMM manufacturing ID was not being initialized and so the DIMMs
were not described in SMBIOS tables properly.
The module type can also be provided, but the SMBIOS code expects
SPD module type values from DDR2 so the DDR3/4 values are adjusted
before sending to SMBIOS.
BUG=b:134897498
BRANCH=sarien
TEST=dump and compare with dmidecode
BEFORE:
Type: DDR4
Manufacturer: Unknown (0)
Form Factor: Unknown
AFTER:
Type: DDR4
Manufacturer: Hynix/Hyundai
Form Factor: SODIMM
Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
What it really means to do is to use different FSP headers.
Change-Id: I3c75d4aac8525ab2639608fb9c1b3a9afef0e943
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I51aa300358013cb0e76704feb2115d2a7e260f8a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31193
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This does the following:
- select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1)
- Remove stale Kconfig option on intel/saddlebrook
- select SOC_INTEL_KABYLAKE on intel/kblrvp
Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is never used.
Change-Id: I414acc38f72e206eb48cfd98214985c320862c91
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
I increase the size oof the postcar stack to prevent a stack overflow
during the measured boot feature. After common string functions have
been moved from inline into .c file
(https://review.coreboot.org/c/coreboot/+/32901), I experienced a stack
overflow in the postcar stage while verifiying the romstage during
measured boot. To prevent this, the stack size should be increased. To
play it safe, it should be increased to 8 KiB - though this is open for
discussion.
Change-Id: I6f1a4631bcadfb8c7d1de5bf0919e40990a65606
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
'else' is not needed after a 'break' or 'return'.
Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33336
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Vlado Cibic
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Braswell supports i2c block write using SMBus controller.
smbus_i2c_block_write() is added to configure SMBus controller in i2c
mode before calling do_i2c_block_write().
Add smbus.c to ramstage.
BUG=N/A
TEST=Verify LCD display is working on Facebook FBG-1701
Change-Id: I50c1a03f624b3ab3b987d4f3b1d15dac4374e48a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I05e97484605306afc70c726187bda8091216c9cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0)
enabled from mainboard devicetree.cb.
TEST=Previously platform was dying at "GMADR is not programmed!" with
IGD disabled.
Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an additional option to skip HECI function
disabling using SMM mode for WHL and CML platform, where FSP has
dedicated UPD to make HECI function disable.
User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated
UPD.
Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig
to make HECI disable and WHL/CML has to rely on FSP to make HECI
disable.
Change-Id: If3b064f3c32877235916f966a01beb525156d188
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI,
hence modify SoC code to reflect the same.
This patch replaces all SoC specific PCI LPC references with ESPI
except anything that touches intel common code block.
Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
|
|
This CL implements below changes:
1) Update FSP-M and FSP-S header files as per FSP release version 1155.
2) Update the PcdSerialIoUartNumber reference in fsp_params.c with
SerialIoUartDebugControllerNumber.
Change-Id: I6d412424f9f5c5d2d56b789c2fef4bdb817a3019
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32844
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No C_ENVIRONMENT_BOOTBLOCK support for Braswell is available.
Enable support and add required files for the Braswell Bootblock in C.
The next changes are made support C_ENVIRONMENT_BOOTBLOCK:
- Add car_stage_entry() function bootblock-c_entry() functions.
- Specify config DCACHE_BSP_STACK_SIZE and C_ENV_BOOTBLOCK_SIZE.
- Add bootblock_c_entry().
- Move init from car_soc_XXX_console_init() to bootblock_soc_XXX_Init()
Removed the unused cache_as_ram_main() and weak car_XXX_XXX_console_init()
BUG=NA
TEST=Booting Embedded Linux on Facebook FBG-1701
Building Google Banos
Change-Id: Iab48ad72f1514c93f20d70db5ef4fd8fa2383e8c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
1. Gfx stolen memory requirement for ICL GFX
2. Enable PeiGraphicsPeim support
Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skip GT specific programming in coreboot to support early
parts without GT enable.
Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not
allowed to return anything. Even an empty return will be resolved to
Return(Null). In order to be conform with the specification, the code
has been refactored to remove the return statements.
Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Skylake C236 to the PCH Table. The one which was already in there is
actually the CM236 and not the C236. This can be checked in datasheet:
100-series-chipset-datasheet-vol-1 p. 25.
Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The SD controller seems to take some time after restarting
the clock at 1.8V before it actually switches from 3.3V to
1.8V. Add a _DSM method that simply sleeps when switching
between 3.3V and 1.8V. Otherwise, the kernel times out too
quickly waiting for the card to acknowledge the 1.8V switch.
The card itself is waiting until it sees the clk signal being
driven at 1.8V.
BUG=b:125441242
TEST=Boot Hatch with SD card and CR2 removed, observe voltage
switch succeeds.
Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Signef-off-by: Evan Green <evgreen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These are documented in the Intel Datasheet entitled
"6th Generation Intel® Processor Datasheet for S-Platforms"
"6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2)
Without them, coreboot fails to properly inform the payload of the
amount of available memory.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Logs from Linux' i915 suggest that not even the FSP/GOP takes proper
care of this. The sequence is mostly the same as on older platforms,
with a slightly different configuration of the backlight PWM.
We light the panel up with 50% PWM duty cycle. This often results in
an already rather high perceived brightness, but shouldn't be too
blinding.
Change-Id: I762a77c8df023a4c14af502af5edfeeb961da1ae
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width
and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry.
Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code in cpu/intel/car/romstage.c Does most of the things like
setting up timestamps, stack guards, entering postcar.
A functional difference is that the FSP header is searched for twice
instead of passed from the CAR entry to the C code. When using
C_ENVIRONMENT_BOOTBLOCK this needs to be done anyway (or a special
linker symbol kept across multiple stages is needed, which is likely
not worth the speedup).
Change-Id: I0f03e5a808f00157fdd807b104417a54e4bde7b2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
With the recent refactoring of memory configuration in
CB:32513 ("soc/intel/cannonlake: Support different SPD read type for
each slot"), meminit_cbfs_spd_index ends up reading SPD from CBFS for
each slot. However, for mainboards that use the same SPD index for
each slot this is unneccessary. This change adds a check to see if
spd_data_ptr is not NULL and current spd index is the same as the last
call to decide if SPD read from CBFS should be skipped.
TEST=Verified that SPD gets read only once on hatch.
Change-Id: I91963b55cea534c92207b2cd9f0caa96df8f222b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33137
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Coverity detects pointer mem_info as NULL_RETURNS. Add sanity check
for mem_info to prevent NULL pointer dereference.
BUG=CID 1401394
TEST=Built and boot up to kernel.
Change-Id: I9d78ab38b8b2dd3734e0143acfd88d9093f16ce6
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33152
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident
on APL at least. It is used outside of soc/intel/ scope, e.g. to con-
figure SeaBIOS.
As we only ever configure a single UART for the coreboot console, we
don't need different addresses for each possible UART. Which saves
us a lot of code.
Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Added missing new lines to Debug Output.
Change-Id: I30f208a60661451bc0794c705113e8d19a68b0eb
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33035
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is never called: The only calling path is guarded by both
!DRIVERS_UART_8250MEM_32 and INTEL_LPSS_UART_FOR_CONSOLE but the
latter selects the former.
If somebody figures out how this is supposed to be used, we can
easily revive the implementation.
Change-Id: I96e304bdee4eadb52725027d0d662ef75f3d4307
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33093
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We should only provide this implementation when the Intel LPSS UART is
used. Otherwise, no other UART could be used for the console with these
SoCs.
Change-Id: Iebd89edb3f21d4a68587fd02659b4d529f3f4bbe
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
We only configure the base address for the console UART, the other
addresses are never assigned to the hardware. It seems better to
return 0 for them instead of a spurious value.
Change-Id: I3fa5c99958b56ca5b0b603917c086bdddb677fa2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
The only path that leads here is guarded by both !DRIVERS_UART_
8250MEM_32 and INTEL_LPSS_UART_FOR_CONSOLE but the latter selects
the former.
Change-Id: I6e0765b028572950991c45b45b2051f4f176a94a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
Change-Id: I7def72e820ee1a4fa47c34b26dab9e0886ba74e6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
Change-Id: I99d51176f6d7d6a98a3a3c82aa8e8eee73344496
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33111
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All Baytrail boards have the same GPU PCI ID, so set it
here to avoid having to set it in each board's config.
Move the VGA_BIOS_FILE config from google/rambi into soc/baytrail
since it likewise applies to all Baytrail boards.
Change-Id: Id1e0580b55e3590d868cb839987f06c49bb07cf5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33026
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpio_pm_configure clears out all the bits related to PM configuration
in MISCCFG register and sets only the bits requested by mainboard. The
mask as it is set currently results in preserving all PM bits instead
of clearing them. This change updates the mask to ensure that the PM
bits are cleared before setting the ones requested by mainboard.
Change-Id: I5b8c04952775dc1e94fa229328be2f3c1102a468
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
<types.h> is supposed to provide <stdint.h> and <stddef.h>.
When <types.h> is included, <stdint.h> and/or <stddef.h> is removed.
Change-Id: I2db0a647bc657a3626cb5e78f23e9198e290261a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
CONFIG_CBFS_SIZE is only meaningful to generate the default fmap
layout and ought not to be used in the code directly.
Change-Id: Iae72a9fb02d62d7548d34689f5eb371f34cd3d81
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31249
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to add the smbios_slot_desc for the SMBIOS Type9 entries into
the devicetree, and not use numbers but strings like
"SlotTypePciExpressGen3X4", smbios.h needs to be included in the
static.c.
Change-Id: Iace547868b4ce8eb7d3624baf1abd1187c1e5f51
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32965
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting up the console and entering postcar can be done in a common
place.
Change-Id: I8a8db0fcb4f0fbbb121a8195a8a8b6644c28db07
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32962
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ASL compiler reports twice warning 'unnecessary/redundant use of Offfset operator'.
Remove redundant offsets.
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I16705b9392b17c50d3988012406e03de393cbcd2
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Clang Static Analyzer found version 8.0.0 gnvs is allocated, but
it is never used. Change sizeof(*gnvs) to sizeof(global_nvs_t)
while adding ACPI GNVS to CBMEM.
TEST=Built and boot up to kernel.
Change-Id: Ie9421af4a556d1d88183aa938ee2a124a10ab727
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The file and all of it's functions are unused. Drop the dead code.
Change-Id: Iaddd7a688d431d40f38293939e084d19b286aed4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: David Guckian
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Clang Static Analyzer version 8.0.0 detects that log2_ceil(bios_size)
and log2_ceil(window_size) are garbage or undefined if the value of
bios_size and window_size is zero. Check bios_size and window_size after
MIN operation to prevent error.
TEST=Built and boot up to kernel.
Change-Id: Ifc3f3da52d129ef5d6063a46b045603a236be759
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Clang Static Analyzer version 8.0.0 detects the division by zero if
gspi_clk_mhz is initialized to 0. gspi_clk_mhz is referred to speed_mhz
in devicetree. Set gspi_clk_mhz to 1 if it is detected as 0 in order to
prevent the division by zero in DIV_ROUND_UP operation. Then the value
of (ref_clk_mhz - 1) will be fed into GSPI's Serial Clock Rate value.
TEST=Built and boot up to kernel.
Change-Id: I6a09474bff114c57d7a9c4c232bb636ff287e4d5
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
All platforms using this code use NO_CAR_GLOBAL_MIGRATION.
Change-Id: I426dee60521045db4711cd253432c65223a64b93
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: If952ad8129e1fa6e45858cb77ec99c9fec55c4a6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I91b6ce3b52d987e2fc0f79e550fda2891502bfe8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I5dfbc718fd82f0511b0049383e4e93c6f15ee932
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32999
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This soc has NO_CAR_GLOBAL_MIGRATION and does not require CAR_GLOBAL
and car_get/set_x.
Change-Id: I4e2c1c5766e3bcdd4763b42fb925074f7ccd7002
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32998
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are only used where they are initially declared.
Change-Id: I0a81a945b771b6c29a170c479b9e72c98e8f3c5a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that this soc supports NO_CAR_GLOBAL_MIGRATION CAR_GLOBAL and
car_get/set_x are not needed anymore.
Change-Id: Ia7fa97135a4b376ac0bd8b30093a77614cc2cf55
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ib863e23863ba6d7504b6c4d32de2f1fea4e57fec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All platforms using this code have NO_CAR_GLOBAL_MIGRATION.
Change-Id: I0f393385aa94f18c2e05af3b5a54999575323d18
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Dumping ME status displays wrong information if we disable Heci1 because
it is called after fsp notifies EndOfFirmware and disables Heci1. This patch
moves the ME status dump before fsp notify EndOfFirmware.
TEST=Boot to OS, check ME dump information
Change-Id: Ifd8b18a41c502c4ecfb84698a7669028394589fd
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ib11981543575311a32896df385d44cf30aa9387f
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32964
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I496b3a91f765d4fa137c32c9ee1e244803fc25d8
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32850
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve boot time with emmc, add ability to send CMD0
and CMD1 early in romstage. This way, by the time system boots to
payload, we are ready to continue with emmc setup and we don't need
to send CMD0 in payload again, and wait for card to reset and be ready.
BUG=b:78106689
TESTS = Boot to OS
Force early_mmc_wake_hw() to return error, recover in payload
Force an error in payload, make sure system can recover/boot
Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Change-Id: Ic04cb7c51862bea4d01f853ee2c88cc03c414e35
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32899
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3e304b9b19978c4100ef3486088d809c2a7fe1d7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32898
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic04231525c1aaaf3afc8c11cddc409b1f5b46743
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32913
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to
detect or initialize a required hardware component.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add a new post code POST_INVALID_VENDOR_BINARY, used when coreboot fails
to locate or validate a vendor supplied binary.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: Ib1e359d4e8772c37922b1b779135e58c73bff6b4
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a new post code POST_INVALID_CBFS, used when coreboot fails to
locate or validate a resource that is stored in CBFS.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: If1c8b92889040f9acd6250f847db02626809a987
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
At the end of device enable, print the ME f/w version number.
Before resume or loading payload, dump the ME's Host Firmware
Status registers.
BUG=b:131437724
BRANCH=none
TEST=Prints seemingly sane values on WHL and CML devices.
Change-Id: Ibeb3a2a85cd84c9baa45f90f20a3dcf69f7d5646
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32527
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include spi.c in romstage. Since FSP 1.0 can't use
NO_CAR_GLOBAL_MIGRATION, adjust global variables in spi.c
to use CAR_GLOBAL.
Adapted from early versions of CB:21107
Change-Id: I3487fb8ac317ce920bf1c3ef9d89590051932378
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enabling flashconsole on these platforms fails to build due to
spi.c not being compiled in prior to ramstage. Include in early stages
(bootblock/romstage/postcar) as needed to enable flashconsole support.
Early inclusion of monotonic_timer.c is needed for Broadwell as well.
Change-Id: Idae0578ca92939246021bb85e34b0dcbd41df3b5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This moves FSP1.1 to use postcar stage to tear down CAR.
On platforms with USE_GENERIC_FSP_CAR_INC the FSP header is found
during the postcar stage so there is no need to push to save it
in CAR global variables.
On FSP1.1 platforms with an open source CAR implementation (Skylake,
even though it still runs the FSP-T), the
soc/intel/common/blocks/cpu/car/exit_car.S code tears down CAR.
This also uses common functions to set up the MTRR to use after
CAR is torn down.
Test: build/boot on google/celes (BSW) and google/chell (SKL)
Change-Id: I2330993842aae9c1365230f0c6bd8a2449dc73a5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Iad3982d9db07a1f17ac39e87ff9c37956e40c258
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: David Guckian
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch removes redundant mca_configure() function call
from ramstage to clear machine check exception. First time it's
getting called from soc_core_init() function inside cpu.c file.
TEST=Build and boot SKL/KBL/AML platform without any machine-check
exception.
Change-Id: I7e54fd07816c6317588ab6db06365937c4300ccd
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
When FSP UPD parameters are configured, also configure the GSPI CS lines
appropriately. GSPI driver assumes CS0 is the CS signal to use.
BUG=b:130329260
BRANCH=None
TEST=Boot Kohaku, TPM communcation still functional.
Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide option in chip.h to set dynamic local clock gating
setting.
BUG=b:130764684
TEST=Able to build and boot CML.
Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide option in chip.h to set dynamic local clock gating
setting.
BUG=b:130764684
TEST=Able to build and boot ICL.
Change-Id: Ic30a490aadb8cc9c05a19a05533ab0196c69b7f1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds new function to perform gpio power management
programming as per EDS.
BUG=b:130764684
TEST=Able to build and boot from fixed media on ICL and CML.
Change-Id: I816a70ad92595f013740a235a9799912ad51665e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
cbmem_find is not available in every stage.
Remove usage of cbmem_find() and use GEN_PMCON1 always.
BUG=NA
TEST=Booting Embedded Linux on Facebook FBG-1701
Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
We need to store the acpi_gpio struct, not save its address.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|