summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake
AgeCommit message (Expand)Author
2016-01-28drivers/intel/fsp1_1: Remove extra include referencesLee Leahy
2016-01-22intel/skylake: Fix klockwork violationNaresh G Solanki
2016-01-22intel/skylake: Thermal Design Power PL1 and PL2 Config Changespchandri
2016-01-21intel/skylake: remove third paragraph of license headerMartin Roth
2016-01-19intel/skylake: Fix issues found by klockworkNaresh G Solanki
2016-01-19intel/skylake: Adding provision to set voltages to the I2C portsNaresh G Solanki
2016-01-19intel/skylake: Disable SaGv in recovery modeharidhar
2016-01-19intel/skylake: Add support for IV feedback loop capture blobSathya Prakash M R
2016-01-18intel/skylake: Change in UPD name from SkipMpInit to FspSkipMpInitBarnali Sarkar
2016-01-18intel/skylake: Remove unused devicetree configuration variablesDuncan Laurie
2016-01-18intel/skylake: provide default VR configurationAaron Durbin
2016-01-18intel/skylake: Add devicetree setting for DDR frequency limit UPDDuncan Laurie
2016-01-18intel/skylake: Add elog event for THERMTRIPDuncan Laurie
2016-01-17intel/skylake: disable heci1 if psf is unlockedArchana Patni
2016-01-17intel/skylake: During RO mode after FSP reset CB lose original stateSubrata Banik
2016-01-16intel/skylake: Fix uninitialized variable warningMartin Roth
2016-01-16intel/skylake: Add kconfig option to skip Native SD ControllerSubrata Banik
2016-01-16intel/skylake: Add VrConfig UPD parameters from corebootRizwan Qureshi
2016-01-16intel/skylake: Enable SkipMpInit tokenRizwan Qureshi
2016-01-15intel/skylake: Init variable so GCC knows it's setMartin Roth
2016-01-15intel/skylake: More UPD params are added for PCH policy in FSPRizwan Qureshi
2016-01-15intel/skylake: Update UPD parameters as per FSP 1.8.0Barnali Sarkar
2016-01-15intel/skylake: Add GPIO ACPI Apis.Subrata Banik
2016-01-15intel/skylake: add nhlt supportAaron Durbin
2016-01-14intel/skylake/pcr.c: error out on invalid size in pcr read/writeMartin Roth
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
2016-01-12intel/skylake: Remove check for Microcode loaded by MEMartin Roth
2016-01-07Correct some common spelling mistakesMartin Roth
2015-12-16intel/skylake: Work around ROMCC optimization bugStefan Reinauer
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
2015-12-08soc/intel/skylake: Remove obsolete Kconfig symbolsMartin Roth
2015-12-04braswell/skylake: Add FspUpdVpd.h to fix compilationStefan Reinauer
2015-12-03intel/skylake: Add ACPI device for audio controllerDuncan Laurie
2015-12-03intel/skylake: Remove unused code to add SSDT2Duncan Laurie
2015-11-20intel/skylake: Fix flash_controller.c compilationStefan Reinauer
2015-11-13intel/skylake: ensure the RTC time is setAaron Durbin
2015-11-05Kconfig: Remove obsolete Kconfig symbols from google/intel boardsMartin Roth
2015-11-05intel/skylake: Add Fan control supportSumeet Pawnikar
2015-11-05skylake: Set Pkg Power clamping bit in Power Limit MSRRizwan Qureshi
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-28intel/skylake: Add USB2 port config for max settingsDuncan Laurie
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
2015-10-27FSP1_1: Always use common codeLee Leahy
2015-10-27FSP 1.1: Replace soc_ prefix with fsp_Lee Leahy
2015-10-27FSP 1.1: Move common FSP codeLee Leahy
2015-10-27intel/kunimitsu FAB3: Configure LPC to Quiet Mode.pchandri
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
2015-10-27intel/skylake: FSP 1.7.0 MemoryInit/SiliconInit params updateRizwan Qureshi
2015-10-27intel/kunimitsu Fab3: Strengthening Rcomp target CTRL valuepchandri
2015-10-27intel/skylake: Add support for Gfx PEIM (AKA GOP)robbie zhang
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
2015-10-14skylake: ACPI: Fix compiler warnings with iasl-20150717Duncan Laurie
2015-10-11skylake: add support for verstageAaron Durbin
2015-10-11skylake: Leave SPI controller enabledLee Leahy
2015-10-11skylake: SPI code cleanupLee Leahy
2015-10-11intel fsp1_1: prepare for romstage vboot verification splitAaron Durbin
2015-10-11soc/intel/common: remove chipset specific callsAaron Durbin
2015-10-11intel SOC common: Remove unused parametersLee Leahy
2015-10-11Skylake: remove the out-dated VR config and un-needed 24mhz calibrationrobbie zhang
2015-10-11skylake: ajdust cache-as-ram region to 64KiBAaron Durbin
2015-10-04drivers/uart/Kconfig: Select 8250 mem when 8250 mem32 is enabledAlexandru Gagniuc
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
2015-09-29skylake: select HAVE_INTEL_FIRMWAREAaron Durbin
2015-09-28skylake: Work around issue in ACPI interpreterDuncan Laurie
2015-09-28skylake: ACPI: Remove Configurable TDP support codeDuncan Laurie
2015-09-23chromeos: vboot and chromeos dependency removal for sw write protect statePaul Kocialkowski
2015-09-17skylake: Use common ACPI _SWS codeDuncan Laurie
2015-09-17Skylake: update C state latency and power numbersrobbie zhang
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
2015-09-10intel/skylake: HAVE_UART_MEMORY_MAPPED doesn't exist anymorePatrick Georgi
2015-09-10skylake: Move ACPI init to SOC instead of mainboardDuncan Laurie
2015-09-10skylake: Enable DPTF based on devicetree settingDuncan Laurie
2015-09-10Skylake: Print GPIO MMIO base and pad config using gpio_debug tokenSubrata Banik
2015-09-09skylake: dptf: Add TSR3 thermal sensor and CPU code cleanupDuncan Laurie
2015-09-09intel/skylake: ACPI: Clean up formatting in and fix ASL codeDuncan Laurie
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
2015-09-08skylake: igd: clean up igd.cDuncan Laurie
2015-09-08Skylake:Set DISB inside romstage after mrc initDhaval Sharma
2015-09-08skylake: Clean up chip.hDuncan Laurie
2015-09-08skylake: Apply USB2 and USB3 port enable/disable settingsDuncan Laurie
2015-09-08skylake: Remove dead codeLee Leahy
2015-09-08skylake: refactor flash_controller codeAaron Durbin
2015-09-08skylake: move flash_controller.h to the proper placeAaron Durbin
2015-09-08skylake: fix eventlog on resume pathAaron Durbin
2015-09-08skylake: allow timer_monotonic_get() in all stagesAaron Durbin
2015-09-08skylake: ACPI: Clean up GPIO controllerDuncan Laurie
2015-09-08skylake: ACPI: Clean up and fix XHCI ACPI DeviceDuncan Laurie
2015-09-08skylake: ACPI: Remove SerialIO ACPI mode codeDuncan Laurie
2015-09-08skylake: ACPI: Move storage controllers to separate fileDuncan Laurie
2015-09-08skylake: ACPI: Remove itss.asl and cleanup irqlinks.aslDuncan Laurie
2015-09-08skylake: iomap: Remove unused RCBA regionDuncan Laurie
2015-09-08skylake: PCR: Add Port ID for SCSDuncan Laurie
2015-09-08skylake: ACPI: Add functions for PCR accessDuncan Laurie
2015-09-08skylake: ACPI: Clean up pch.aslDuncan Laurie
2015-09-08skylake: ACPI: Fix and clean up PCIE _PRT entriesDuncan Laurie
2015-09-07microcode: Unify rules to add microcode to CBFS once againAlexandru Gagniuc
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
2015-08-31soc/intel: Fix dependency of CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEMAlexandru Gagniuc
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 00:46:57 +0000