summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake
AgeCommit message (Expand)Author
2015-10-11skylake: ajdust cache-as-ram region to 64KiBAaron Durbin
2015-10-04drivers/uart/Kconfig: Select 8250 mem when 8250 mem32 is enabledAlexandru Gagniuc
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
2015-09-29skylake: select HAVE_INTEL_FIRMWAREAaron Durbin
2015-09-28skylake: Work around issue in ACPI interpreterDuncan Laurie
2015-09-28skylake: ACPI: Remove Configurable TDP support codeDuncan Laurie
2015-09-23chromeos: vboot and chromeos dependency removal for sw write protect statePaul Kocialkowski
2015-09-17skylake: Use common ACPI _SWS codeDuncan Laurie
2015-09-17Skylake: update C state latency and power numbersrobbie zhang
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
2015-09-10intel/skylake: HAVE_UART_MEMORY_MAPPED doesn't exist anymorePatrick Georgi
2015-09-10skylake: Move ACPI init to SOC instead of mainboardDuncan Laurie
2015-09-10skylake: Enable DPTF based on devicetree settingDuncan Laurie
2015-09-10Skylake: Print GPIO MMIO base and pad config using gpio_debug tokenSubrata Banik
2015-09-09skylake: dptf: Add TSR3 thermal sensor and CPU code cleanupDuncan Laurie
2015-09-09intel/skylake: ACPI: Clean up formatting in and fix ASL codeDuncan Laurie
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
2015-09-08skylake: igd: clean up igd.cDuncan Laurie
2015-09-08Skylake:Set DISB inside romstage after mrc initDhaval Sharma
2015-09-08skylake: Clean up chip.hDuncan Laurie
2015-09-08skylake: Apply USB2 and USB3 port enable/disable settingsDuncan Laurie
2015-09-08skylake: Remove dead codeLee Leahy
2015-09-08skylake: refactor flash_controller codeAaron Durbin
2015-09-08skylake: move flash_controller.h to the proper placeAaron Durbin
2015-09-08skylake: fix eventlog on resume pathAaron Durbin
2015-09-08skylake: allow timer_monotonic_get() in all stagesAaron Durbin
2015-09-08skylake: ACPI: Clean up GPIO controllerDuncan Laurie
2015-09-08skylake: ACPI: Clean up and fix XHCI ACPI DeviceDuncan Laurie
2015-09-08skylake: ACPI: Remove SerialIO ACPI mode codeDuncan Laurie
2015-09-08skylake: ACPI: Move storage controllers to separate fileDuncan Laurie
2015-09-08skylake: ACPI: Remove itss.asl and cleanup irqlinks.aslDuncan Laurie
2015-09-08skylake: iomap: Remove unused RCBA regionDuncan Laurie
2015-09-08skylake: PCR: Add Port ID for SCSDuncan Laurie
2015-09-08skylake: ACPI: Add functions for PCR accessDuncan Laurie
2015-09-08skylake: ACPI: Clean up pch.aslDuncan Laurie
2015-09-08skylake: ACPI: Fix and clean up PCIE _PRT entriesDuncan Laurie
2015-09-07microcode: Unify rules to add microcode to CBFS once againAlexandru Gagniuc
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
2015-08-31soc/intel: Fix dependency of CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEMAlexandru Gagniuc
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
2015-08-29intel/skylake: Add support for DPTFShilpa Sreeramalu
2015-08-29intel/skylake: remove the gpio_fsp.h usage as skylake boards move gpiorobbie zhang
2015-08-29intel/skylake: gpio macro adding - gpio output with term and 20k pdrobbie zhang
2015-08-29intel/skylake: Implement HW Sequence based WP status read functionalityBarnali Sarkar
2015-08-29intel/skylake: Implemented generic SPI driver for ROM/RAMSTAGE access.Subrata
2015-08-29intel/skylake: Fix RMT disable of saved training dataDuncan Laurie
2015-08-29intel/skylake: mask off txstate before setting new gpio valueAaron Durbin
2015-08-29intel/skylake: Clean up Serial IO DMA channelsArchana Patni
2015-08-29intel/skylake: Force full memory train if RMT is enabledDuncan Laurie
2015-08-29fsp raminit: Add romstage_params to soc_memory_init_paramsDuncan Laurie
2015-08-28soc/*/Makefile.inc: Do not add soc/common as a subdirAlexandru Gagniuc
2015-08-27skylake: only generate ACPI cpu entries onceAaron Durbin
2015-08-27skylake: make PAD_CFG_GPI default to GPIO ownershipAaron Durbin
2015-08-19Skylake: update cbmem_topRizwan Qureshi
2015-08-19skylake: Update Memory and Silicon Init paramsRizwan Qureshi
2015-08-19skylake: correct IO-APIC redirection entry countAaron Durbin
2015-08-19skylake: add gpe.h for ASL generationAaron Durbin
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
2015-08-17soc/intel/skylake/Kconfig: Fix recursive Kconfig dependencyMartin Roth
2015-08-14skylake: fix SMI GPI status handlingAaron Durbin
2015-08-14skylake: enable SMI routed GPIsAaron Durbin
2015-08-14skylake: clarify and fix gpio macrosAaron Durbin
2015-08-14skylake: provide clarification for FADT gpe0_blk_lenAaron Durbin
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
2015-08-14skylake: provide GPE0 routing devicetree configurationAaron Durbin
2015-08-14skylake: remove IedSize from chip.hAaron Durbin
2015-08-14skylake: pass IED_REGION_SIZE Kconfig to FSPAaron Durbin
2015-08-14intel/common: fix stage_cache_external_region()Aaron Durbin
2015-08-14skylake: use smm_subregion() during SMM relocationAaron Durbin
2015-08-14skylake: clean up SMM region calculationsAaron Durbin
2015-08-14Skylake: Add ASL code to enable GPIO controllerArchana Patni
2015-08-14skylake: clear write-1-to-clear fields in power regsAaron Durbin
2015-08-14skylake: fix invalid GNVS base addressAaron Durbin
2015-08-14skylake: enumerate the SMI status fieldsAaron Durbin
2015-08-14skylake: set DISB in GEN_PMCON_A register properlyAaron Durbin
2015-08-14skylake: fill out gen_pmcon_* bitfieldsAaron Durbin
2015-08-14skylake: do not overlap resourcesAaron Durbin
2015-08-14skylake: use native gpio configuration for uartAaron Durbin
2015-08-14skylake: provide native gpio functionalityAaron Durbin
2015-08-13skylake: fix serial port with new code baseAaron Durbin
2015-08-13skylake: Add Deep Sx configuration for wake pinsDuncan Laurie
2015-08-13skylake: remove CBFS_SIZE option in SoC directoryAaron Durbin
2015-08-13skylake: fix garbled patch from upstreamAaron Durbin
2015-07-29skylake: Update microcode reload in ramstage.Rizwan Qureshi
2015-07-29Skylake: Fix microcode reload in bootblock cpu initRizwan Qureshi
2015-07-29skylake: clean-up pei_datarobbie zhang
2015-07-29skylake: align power management names with hardwareAaron Durbin
2015-07-29skylake: provide pcr helper to get a port's register spaceAaron Durbin
2015-07-29skylake: prefix the gpio functions with 'gpio_'Aaron Durbin
2015-07-29skylake: remove unused types and definitions in gpio.hAaron Durbin
2015-07-29skylake: remove the redundant fspNotify in chip final.robbie zhang
2015-07-29skylake: Rework microcode include pathDuncan Laurie
2015-07-24skylake: Fix building without serial consoleDuncan Laurie
2015-07-23skylake: sanitize pcr header for ACPI and assemblerAaron Durbin
2015-07-23skylake: provide more clarity for PCR accessAaron Durbin
2015-07-21skylake: add global reset cause registers to power stateAaron Durbin
2015-07-21skylake: take into account deep s3 in power failure checkAaron Durbin
2015-07-21skylake: read out and report full width of gen_pmcon registersAaron Durbin
2015-07-21Glados: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 18:38:19 +0000