aboutsummaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/chip.h
AgeCommit message (Collapse)Author
2017-06-06soc/intel/skylake/chip.h: Reorder declarationsNico Huber
Place `tdp_pl2_override` above the FSP options as it's not an FSP option. Change-Id: Idff2b628d19ce1a80294b28c55c05ba4157d07e0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06soc/intel/skylake/chip.h: Provide some enumsNico Huber
Provide some enums instead of unreadable comments that are usually copied all over. Change-Id: Iff551565647f28ecb226e1df633b4deec0ab0a7f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16soc/intel/skylake: Add option to enable/disable EISTSubrata Banik
Set MSR 0x1A0 bit[16] based on EIST config option. Default Hardware Managed P-state (HWP) also known as Intel Speed Shift is enabled on SKL hence disable EIST and ACPI P-state table. Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-04soc/intel/skylake: Remove unused skylake_i2c_config structureFurquan Shaikh
Remove struct skylake_i2c_config from chip.h since it is not used anymore. Change-Id: Icde4b7af5b9c31020099c1a6372a6867827f61ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-06soc/intel/skylake: Add support for GSPI controllerFurquan Shaikh
Sky Lake PCH contains two GSPI controllers. Using the common GSPI controller driver implementation for Intel PCH, add support for GSPI controller buses on Sky Lake/Kaby Lake. BUG=b:35583330 Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-23soc/intel/skylake: Add SGX initializationRobbie Zhang
This patch implements SGX initialization steps in coreboot per Intel SGX BWG rev 2.0.8 for Kaby Lake SoC. If enabled on a Kabylake device, SoC capability and PRM (processor reserved memory) of desired size (needs to be configured through PrmrrSize) are provisioned for later software stack to use SGX (i.e., run SGX enclaves). One issue is still puzzling and needs to be addressed: by calling configure_sgx() in cpu_core_init() which is the per-thread function, SGX is always failing for thread 0 but is successful for other 3 threads. I had to call configure_sgx() again from soc_init_cpus() which is the BSP-only function to make it enable on the BSP. Another pending work is the implementation for the Owner Epoch update which shall be added later. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified SGX activation is successful on all threads. Change-Id: I8b64284875eae061fa8e7a01204d48d320a285a9 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18445 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add option to disable host reads to PMC XRAMRizwan Qureshi
FSP disables host access to shadowed PMC XRAM registers by default, it also provides a UPD to enable/disable host reads to these regiters. Expose the same in devicetree as a config option. Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add configs for enabling DCI and TraceHubAamir Bohra
Add configs for enabling Intel TraceHub and DCI for aid in debugging. Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-08intel/skylake: Add devicetree settings for acoustic noise mitigationDuncan Laurie
Add options to the skylake chip config that will allow tuning the various settings that can affect acoustics with the CPU and its VRs. These settings are applied inside FSP, and they can adjust the slew slew rate when changing voltages or disable fast C-state ramping on the various CPU VR rails. BUG=b:35581264 BRANCH=none TEST=these are currently unused, but I verified that enabling the options can affect the acoustics of a system at runtime. Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-04soc/intel/skylake: indicate voltage margining enabled/disabledRizwan Qureshi
Support for voltage margining is dependent on the platform. Enabling voltage margining puts additional constraints for the SLP_S0# to be asserted and hence moving to S0ix state. If the platform PMIC/VR supports PCH voltage reduction, voltage marigining can be enabled. Use the UPD provided by FSP to enable/disable voltage margining. Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18469 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-23soc/intel/skylake: Enable Systemagent IMGURizwan Qureshi
Camera and Imaging device should be enabled for camera usecase, FSP provides a UPD to enable/disable the SA IMGU (Imaging Unit) expose the same as a config option in devicetree.cb Also remove a redundant assignment for PchCio2Enable. BUG=None BRANCH=None TEST=lspci should list 00:05:00 Change-Id: I4cf7daf41bfaf4dcba414921cac2e7e12bf89f37 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18365 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-18soc/intel/skylake: add PrmrrSize to chip configRobbie Zhang
Prmrr configuration is supported by Kabylake FSP-M with UPD provided. It is required as one of the SGX initialization steps in BIOS. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set size and boot. Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11soc/intel/common/lpss_i2c: simplify API and use common config structureAaron Durbin
The apollolake and skylake had duplicate stanzas of code for initializing the i2c buses. Additionally, they also had very similar structures for providing settings for the i2c speed control. Introduce a new struct lpss_i2c_bus_config and utilize it in both apollolake and skylake thereby removing the need for SoC-specific structres. The new structure is used for initializing a bus fully as the lpss i2c API is simplified in that lpss_i2c_init() is only required to be called. The struct lpss_i2c_bus_config structure is passed in for both initializing and filling in the SSDT information. The formerly exposed functions are made static to reduce the external API exposure. BUG=chrome-os-partner:58889 Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-09soc/intel/skylake: fix memory access beyond array boundsRizwan Qureshi
chip.h has a config array PcieRpClkReqNumber which corresponds to a FSP UPD parameter, the size is currently set to 20. However the size of PcieRpClkReqNumber UPD in FSP2.0 is 24, so memcpy (config buffer to UPD buffer) in chip_fsp20.c will read beyond the bounds of config array. Hence set the size of PcieRpClkReqNumber array based on the FSP in use. Found-by: Coverity Scan #1365385, #1365386 Change-Id: I937f68ef33f218cd7f9ba5cf3baaec162bca3fc8 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/17292 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-26intel/skylake: Add support to enable wake-on-usb attach/detachFurquan Shaikh
Three things are required to enable wake-on-usb: 1. 5V to USB ports should be enabled in S3. 2. ASL file needs to have appropriate wake bit set. 3. XHCI controller should have the wake on attach/detach bit set for the corresponding port in PORTSCN register. Only part missing was #3. This CL adds support to allow mainboard to define a bitmap in devicetree corresponding to the ports that it wants to enable wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in PORTSCN would be set by xhci.asl for the appropriate ports. BUG=chrome-os-partner:58734 BRANCH=None TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb attach/detach. Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17056 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15soc/intel/skylake: Add FSP 2.0 support in romstageBarnali Sarkar
Populate SoC related Memory initialization params. Post memory init, set DISB, setup stack and MTRRs using the postcar funtions provided in postcar_loader.c. TEST=Build and boot kunimitsu, dram initialization done. ramstage is loaded. Change-Id: I8d943e29b6e118986189166d92c7891ab6642193 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-07-01skylake: Generate ACPI timing values for I2C devicesDuncan Laurie
Have the Skylake SOC generate ACPI timing values for the enabled I2C controllers instead of passing it in the DSDT with static timings. The timing values are generated from the controller clock speed and are more accurate than the hardcoded values that were in the ASL which were originally copied from Broadwell where the controller is running at a different clock speed... Additionally it is now possible for a board to override the values using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then the kernel will generate its own timing using the same forumla, but if the SDA hold time value is zero the kernel will NOT generate a correct value and the SDA hold time may be incorrect. This was tested on the Chell platform to ensure all the I2C devices on the board are still operational with these new timing values. Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-09skylake: Support common LPSS I2C driverDuncan Laurie
Support the common Intel LPSS I2C driver for the 6 I2C bus controllers that are present on the Skylake-LP PCH with a 120 mHz clock. The required lpss_i2c_base_address() method is implemented separately for verstage/romstage and ramstage environments. This provides methods to convert to and from "struct device" and the I2C controller bus number for that device. These are used to provide support for the "I2C Bus Operations" that are present in the coreboot devicetree. To support the I2C controller before ramstage an early init function is provided to do minimal initializaiton of the PCI device and assign a temporary base address for use before memory. The final base address is assigned during device enumeration and used during ramstage. Because it is usually not necessary to enable I2C controllers before ramstage a config register for the devicetree is provided to perform early initialization of this controller. In addition the bus speed can be set in the devicetree and that speed will be applied when the device is initialized. If not provided the default speed is set to I2C_SPEED_FAST. This was tested with the google/chell mainboard by reading and writing from the trackpad and codec devices during both verstage and ramstage. Change-Id: Ia0270adfaf2843a3be4e00c732c85401a3401ef5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15105 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
Move the existing I2C voltage configuration variable into a new structure that is equivalent, similar to how USB ports are configured. This is to make room for additional I2C configuration options like bus speed and whether to enable the bus in early boot which are coming in a subsequent commit. The affected mainboards are updated in this commit so it will build. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e Reviewed-on: https://review.coreboot.org/15104 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-31skylake: Add SD card device to configure card detect GPIODuncan Laurie
Add a PCI driver for the skylake SD card device and have it generate an entry in the SSDT for the card detect GPIO if it is provided by the mainboard in devicetree. This sets up a card detect GPIO configuration that will trigger an interrupt on both edges with a 100ms debounce timeout and can wake the SD controller from D3 state. The GpioInt() entry is bound to the "cd-gpio" device property which will be consumed by the kernel driver. The resulting ACPI output in the SSDT will be combined with the SDXC device declaration in the DSDT. Example: Scope (\_SB.PCI0.SDXC) { Name (_CRS, ResourceTemplate () { GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 10000, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 35 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "cd-gpio", Package () { \_SB.PCI0.SDXC, 0, 0, 1 } } } }) } Change-Id: Ie4c1bfadd962cf55a987edb9ef86e92174205770 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add GPE header file to chip.hDuncan Laurie
Add the GPE header file to skylake chip.h so the SOC-defined macros for the various GPE values can be used in devicetree directly. For example: chip drivers/i2c/touchpad register "wake" = "GPE0_DW0_05" device i2c 15.0 on end end Change-Id: Ic322108561b34aa34a24a4daba6ba7a4f7a3f9a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14991 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
Command List: Send command for PS4 exit fails BUG=chrome-os-partner:52355 BRANCH=glados TEST=Build and boot lars and verify no hang during active idle CQ-DEPEND=CL:*257305 Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368 Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341330 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14688 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12soc/intel/skylake: add option to statically clock gate 8254 timerAaron Durbin
In order to save more power by shutting down clocks add the ability to optionally clock gate the 8254 programmable interrupt timer. When doing this the platforms lose their "PC"-ness which certain payloads and OSes rely on such as SeaBIOS. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Enabled option on chell. Noted the bit is set upon booting. Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477 Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331171 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01Skylake: Support Intel Speed Shift Technology based on configSubrata Banik
Intel Speed Shift Technology is a new mechanism that replaces Legacy P-state. ISST allows OS hints about energy/performance preference. H/W performs the actual P-state control (autonomous) 1. Optimization frequency seclection for low residency workloads, no longer a static knee point. 2. Optimized frequency selection for best energy to performance trade offs. 3. Kick down frequency (from idle) fpr best responsiveness while taking energy consumption init account. Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes and enable HWP accordingly. BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu and verify HWP getting enabled/disabled using Intel P-state driver. Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313107 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: https://review.coreboot.org/13835 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22intel/skylake: Thermal Design Power PL1 and PL2 Config Changespchandri
Override the default PL2 values with one recommended by Intel. Disable PL1 configuration via MMIO register. BUG=chrome-os-partner:49292 BRANCH=glados TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W MMIO 0x59A0[15] to find PL1 enable/disable = Disable MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W Here PL2 is set to 25W and PL1 is disabled. Change-Id: I10742f91cc7179de1482d42392338976e8082afe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1b7771ccb34bdff92ffa9870733bd641e4644cdf Original-Change-Id: Iefa93912008c71b41f2b20465e8acfd42bb6c731 Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321392 Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/13070 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/skylake: Adding provision to set voltages to the I2C portsNaresh G Solanki
This patch adds an UPD/VPD parameter to set voltages to the I2C ports individually via devicetree.cb BRANCH=None BUG=chrome-os-partner:47821 TEST=Tesed by setting voltage via devicetree.cb and verified voltage level using a DSO probe. CQ-DEPEND=CL:*242225, CL:*241206 Change-Id: Iaeb1ab3f9724aa1139c876dc63250469661d8439 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fc73b98529ad1eb187f97a4177beda4224f473d1 Original-Change-Id: Ib477ad26667ef59cd298b5e20a68a8c68d85bd8d Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315167 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13006 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18intel/skylake: Change in UPD name from SkipMpInit to FspSkipMpInitBarnali Sarkar
Changing the UPD param name from "SkipMpInit" to "FspSkipMpInit" BRANCH=none BUG=none TEST=Build and booted in kunimitsu with FspSkipMpInit token enabled from Coreboot. Change-Id: I5ebe7a1338ac77a62d5aa2e48e083b4fb906bf28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cdaa95a82bc7e90637c6b90e33d88d040e085f58 Original-Change-Id: Ibdaa3d202f8f6f6f0ca6c6d4c6428f1616572f1d Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319353 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12993 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-18intel/skylake: Remove unused devicetree configuration variablesDuncan Laurie
The GPU panel configuration variables are unused on skylake and are no longer needed in chip.h. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-chell coreboot Change-Id: Ie6bfb676b5a32b4d4d39dda91b90fc7e973d38e0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f261d7ca9ec93aae1362975efde11ac9657b7ca6 Original-Change-Id: If64594455754e4dea1f53511861b74ddd880c5b5 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/318923 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12986 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/skylake: Add devicetree setting for DDR frequency limit UPDDuncan Laurie
There is a UPD setting exposed by FSP that allows the DDR frequency to be limited. Expose this for devicetree. BUG=chrome-os-partner:47346 BRANCH=none TEST=tested by limiting DDR frequency to 1600 on chell EVT Change-Id: I1f17b221d9fa4c2dd1e8c5f403deb0f2bc0493a7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 91f760ad19823225f7e5bd2dc690164ed253e220 Original-Change-Id: Ibcd4a65a9cfd7d32fbf2ba8843ab25da8e9cf28a Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/317243 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12981 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-17intel/skylake: disable heci1 if psf is unlockedArchana Patni
This patch adds support for disabling the heci1 device at the end of boot sequence. Prior to this, FSP would have sent the end of post message to ME and initiated the d0i3 bit. This uses the Psf unlock policy and the p2sb device to disable the heci1 device, then lock the configuration and hide the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu or glados board. set the hecienabled policy to 0 and check for heci 1 device status in kernel lspci. CQ-DEPEND=CL:*238451 Change-Id: I26b145231f8ed0c140af42d378b222e857d9aff6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fe184b8baf1bea9bcd0af1841785a4d763af9358 Original-Change-Id: I3b435491aeea0f2ca36b7877e942dc940560e4dd Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311912 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12976 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/skylake: Add VrConfig UPD parameters from corebootRizwan Qureshi
Adding VrConfig UPDs and assign values to those from devicetree BRANCH=none BUG=chrome-os-partner:45387 TEST=Build and booted in kunimitsu CQ-DEPEND=CL:310192 Change-Id: Ifce9dfacabc742b55266c48459c56c69b1f22236 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b34a3cc77afc8795abb64972f8169986c30c2acd Original-Change-Id: Ifa960e718ed77db729f1fc4e2c00c9b305093e04 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311317 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12944 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-16intel/skylake: Enable SkipMpInit tokenRizwan Qureshi
This patch helps to enable SkipMpInit token of FSP SiliconInit UPD BRANCH=none BUG=chrome-os-partner:44805 TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB. CQ-DEPEND=CL:310869 Change-Id: I43377e4b8adadf42091a9387883363fdfbab4c1b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b7962273fd1a591cfe9a658f49ebc7d23bcad577 Original-Change-Id: I977d2d39c283d74f1aa9033c8aa60dc652735019 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310192 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/skylake: More UPD params are added for PCH policy in FSPRizwan Qureshi
Some more PCH Policy UPD Parameters are added in FSP. Lockdown config moved from FSP to coreboot. Removing settings in devicetree.cb which are zero. BRANCH=none BUG=none TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:*237842, CL:310191 Change-Id: I3dcf3a5340f3c5ef2fece2de5390cde48db4d327 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8bdb35897b640d271adcaed266030367f060553 Original-Change-Id: Ia201672565c07b2e03d972b2718512cd4fcbb95c Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310869 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12941 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
Instead of having many different arrays for USB configuration, with each array containing one bit of information, have one array containing all the information for each port. This way we can put the basic tuning parameters into a structure and then define structures for the basic supported configurations. The existing port definitions are taken from the Skylake HSIO tuning guide. BUG=chrome-os-partner:40635 BRANCH=none TEST=build and boot on glados, verify USB functionality in all ports. Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506 Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/306734 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
Implemented Device IRQ porgramming, PxRC to IRQ mapping, GPIO IRQ routing, SCI IRQ select through UPD BUG=NONE BRANCH=NONE CQ-DEPEND=CL:*232948 TEST= build and booted sklrvp,kunimitsu with this changes. Change-Id: Ic98074491fe5251a48ed55b6fb7ef31809c3abf3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 534bd65e5df8654d745c8efe491a332336c9cdc3 Original-Change-Id: I4ea6f3cdb15d371c6023bfd046f3475290f5aa26 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291403 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12146 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/skylake: FSP 1.7.0 MemoryInit/SiliconInit params updateRizwan Qureshi
In FSP 1.7.0 SataMode and SataEnable have been moved from MemoryInit to SiliconInit. Also, GpioTablePtr has been removed. USB phy settings added to SiliconInit, Enable the configs for USB equalization settings in coreboot. Addition of serialIO UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684, chrome-os-partner:42284, chrome-os-partner:41374 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:*232947, CL:*232946, CL:*232948, CL:*232949 Change-Id: I2e8e6e32fc7074774ddcf1fb4c270bb56372b7df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 623c5a52f3afedaf2c0bfe7361cfd627d093cb73 Original-Change-Id: I8b3be2c49893c564fe2197aa32bde6323bf425e9 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303661 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12144 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
FSP should not lock CMOS unconditionally. coreboot sends Silicon UPD parameter "RtcLock" to FSP to take action on CMOS region locking/un-locking. This patch has CB generic code for creating the Silicon UPD paramater. BUG=chrome-os-partner:44484 BRANCH=none TEST=Build and booted in kunimitsu, tested using below command- When DIsabled RtcLock from devicetree in coreboot, booted to kernel and run following commands - >> crossystem fw_result=success >> crossystem | grep fw_result It should reflect the value that is set. Here, success. If ENabled RtcLock from Coreboot devicetree, The same commands will fail to update the fw_result status from crossystem utility. CQ-DEPEND=CL:*229144 Change-Id: I7f63332097cdaf6eedefbc84bec69ce4e9cc59d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c7b8293a2c55117d7ca2001ac9ec0de24d35b80b Original-Change-Id: If708e2c782644dcf7f03785d1bfa235ef5385d80 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297980 Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com> Original-Tested-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-10skylake: Enable DPTF based on devicetree settingDuncan Laurie
Enable DPTF flag in ACPI NVS based on devicetree setting for the mainboard. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-glaods coreboot Change-Id: I06ec6b050eb83c6a7ee1e48f2bd9f5920f7bfa51 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5728a8a37b1a50a483aa211563fb7ad312002ce5 Original-Change-Id: I08d61416c24b3c8857205cf88931f0bb2b38896c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297755 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11565 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: Clean up chip.hDuncan Laurie
Remove config options that do not apply and are unused on skylake. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-glados coreboot Change-Id: Ic410f8e6b8ecc06d6f4fb1f229017df18c6045f3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3224b89e310909c2836ef2c669c6b2ee826b1b28 Original-Change-Id: I2b4fe85f78480eac5635e78ce4e848f73967bd27 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11563 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-19skylake: Update Memory and Silicon Init paramsRizwan Qureshi
Update the MemoryInit and SilicoInit params as per FSP 1.3.0 release. Note: add SvGv and Rmt to Upd. BRANCH=None BUG=None TEST=Build and Boot FAB3 (Kunimitsu) CQ-DEPEND=CL:*226035, CL:*226045 Original-Change-Id: I62000f6a485fee42ef733c3b548192f2bedfce49 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291573 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Change-Id: Iaafa658b4e710fe512526a521cf6c529efb19bf0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11238 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
The ec_smi_gpio and alt_gp_smi_en devicetree options are goign to be removed. The plan for skylake is to set the settings by the mainboard through either gpio pad configuration or through helper functions. Moreover, these values only allow *1* SMI GPIO configuration in that the following has to be true: alt_gp_smi_en = 1 << (ec_smi_gpio % 24) If not, then another gpio(s) from the same group has the SMI_EN bit set for it. Lastly, remove all the subsequent dependencies as they are no longer used: enable_alt_smi() and gpio_enable_group(). BUG=chrome-os-partner:43778 BRANCH=None TEST=None Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291931 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide GPE0 routing devicetree configurationAaron Durbin
On skylake the GPE0 routing can be dynamically changed to a particular GPIO group. Provide the ability for the mainboard to set the route accordingly. If any of the values in the devicetree are the same the current setting in the PMC register is used. The GPIO communities need to have matching configuration for the plumbing to work properly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados w/ and w/o devicetree changes. Fields are set accordingly. Original-Change-Id: I263d648c8ea8a70b21570f01b333d05a5fa2a4e3 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291930 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I966d38bc197dbb52a2ba50927c06e243e169afbe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove IedSize from chip.hAaron Durbin
IedSize is not used in replace of IED_REGION_SIZE. Drop it from chip.h. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: I38f6518701306c0ffc6d2b2e3fe01624a5eadf54 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290933 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I9dd9e689d4d4f7b4770369dcd042d3325990ae32 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11201 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: Add Deep Sx configuration for wake pinsDuncan Laurie
Add support for enabling various pins in Deep Sx by setting a register in the mainboard devicetree. BUG=chrome-os-partner:43079 BRANCH=none TEST=build and boot on glados Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11170 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-21skylake: Show SPI controller if enabled in devicetree.cbDuncan Laurie
Unhide the SPI controller PCI device if it is enabled in devicetree.cb so flashrom can do its job. BUG=chrome-os-partner:37711 BRANCH=none TEST=run flashrom -r on glados Change-Id: Ie567f970149700d29df0ae09db4962f36cf24219 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 172eac55ad6134fe5e347e37c055b383e3b03245 Original-Change-Id: Ia77b559cc607794aecc25d6d469224d855199568 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284948 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10986 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 04:31:18 +0000