summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/chip.c
AgeCommit message (Collapse)Author
2018-10-09soc/intel/skylake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-17soc/intel/skylake: permit Kconfig to set subsystem IDMatt Delco
This change permits the subsystem ID to be specified via Kconfig for the devices on the SoC. Some devices are getting zero'ed subsystem IDs because the unset (and thus zero'ed) config options are overwriting the fsp defaults. With this change the fsp defaults will only be overwritten by non-zero config values. Change-Id: I0f7bb8e465f55e5dd6d8e0fad71b9b2a22f089dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-07-09soc/intel/skylake: config ISH in SOC sideli feng
Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07soc/intel/common/pch: Add pch lockdown codeSubrata Banik
pch lockdown functionality can be used by supported PCH. Right now pch lockdown functionality is applied for SPT (Skylake SOC) and CNP(Cannon Lake SOC) PCH. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL and CNL platform. Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04soc/intel/skylake: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Idf00c029331aba30c8bfca71546cad62ff6bb0a7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26541 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-08{mb,nb,soc}: Remove references to pci_bus_default_ops()Nico Huber
pci_bus_default_ops() is the default anyway. Change-Id: I5306d3feea3fc583171d8c865abbe0864b6d9cc6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06soc/intel/skylake: Add devicetree variable for PCIe HotPlugDuncan Laurie
Add a variable to fill out the FSP UPD variable for PCIe HotPlug, which allows a mainboard to enable HotPlug on individual root ports. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23511 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-13soc/intel/skylake: Remove set_subsystem() from SoCSubrata Banik
Intel common PCI driver is handle PCI subsystem ID programming, hence no need to have an explicit soc function to do the same. TEST=PCI subsystem id is getting programming during pci enumeration. Change-Id: Iead57a286b26d532e578cfff99f412c23fd4c2fe Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-09soc/intel/skylake: add acoustic noise mitigation params for FSP 1.1Matt DeVillier
Adapted from Chromium commit d6655eb [Skylake: create UPD Interface for acoustic noise tuning] Add FSP 1.1 params needed for acoustic mitigation on google/caroline (to be upstreamed in a subsequent commit). TEST: build/boot google/caroline Change-Id: Ifb36ecef8c1735c63a5322d952929e9c34cddfb9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-08soc/intel/skylake: Remove pch_enable_dev() from SoCSubrata Banik
PCI resources MMIO space/bus master enabling is handled inside pch_dev_enable_resources() from common device code. Hence no need to have an explicit soc function to do the same. TEST=lspci from kernel console shows same pci device list without and without this patch. Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-14intel/skylake: Use Sata related registers from devicetreeYouness Alaoui
Enable the use of the SataPortsEnable and SataPortsDevSlp registers which were being ignored from the devicetree and were not affecting the resulting UPD parameters. SataPortsEnable was only being copied for the first SATA port, while the other ports were left ignored. Change-Id: Iae70a4d6375fa5d1b05ee89f6b97c65dbbf28dda Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-22soc/intel/skylake: Fix broken suspend-resumeFurquan Shaikh
With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, suspend resume is currently broken for all skylake/kabylake boards. All the skylake/kabylake boards store external stage cache in TSEG, which is relocated post MP-init. Thus, if FSP loading and initialization is done after MP-init, then ramstage is not able to: 1. Save FSP component in external stage cache during normal boot, and 2. Load FSP component from external stage cache during resume In order to fix this, ensure that FSP loading happens separately from FSP initialization. Add fsp_load callback for pre_mp_init which ensures that the required FSP component is loaded/saved from/to external stage cache. BUG=chrome-os-partner:63114 BRANCH=None TEST=Verified that 100 cycles of suspend/resume worked fine on poppy. Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18414 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14soc/intel/skylake: Perform CPU MP Init before FSP-S InitSubrata Banik
As per BWG, CPU MP Init (loading ucode) should be done prior to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry (before FSP-S call). BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Boot to OS with all threads enabled. Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18287 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
Move the existing I2C voltage configuration variable into a new structure that is equivalent, similar to how USB ports are configured. This is to make room for additional I2C configuration options like bus speed and whether to enable the bus in early boot which are coming in a subsequent commit. The affected mainboards are updated in this commit so it will build. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e Reviewed-on: https://review.coreboot.org/15104 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-21skylake: Add ACPI device name handlerDuncan Laurie
Add a global ACPI device name handler for the Skylake SOC that will translate skylake device paths into an ACPI path that matches the device objects delcared in the DSDT at soc/intel/skylake/acpi/*. The skylake implementation uses a global acpi_name handler for the SOC and it is not necessary to add a function to every device. This function is used by device drivers calling acpi_device_name() and acpi_device_path() to generate ACPI AML in the SSDT. Change-Id: I31cecf7905a51224e7bfc40c6c4ad2487f039097 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14841 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/skylake: Adding provision to set voltages to the I2C portsNaresh G Solanki
This patch adds an UPD/VPD parameter to set voltages to the I2C ports individually via devicetree.cb BRANCH=None BUG=chrome-os-partner:47821 TEST=Tesed by setting voltage via devicetree.cb and verified voltage level using a DSO probe. CQ-DEPEND=CL:*242225, CL:*241206 Change-Id: Iaeb1ab3f9724aa1139c876dc63250469661d8439 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fc73b98529ad1eb187f97a4177beda4224f473d1 Original-Change-Id: Ib477ad26667ef59cd298b5e20a68a8c68d85bd8d Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315167 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13006 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18intel/skylake: Change in UPD name from SkipMpInit to FspSkipMpInitBarnali Sarkar
Changing the UPD param name from "SkipMpInit" to "FspSkipMpInit" BRANCH=none BUG=none TEST=Build and booted in kunimitsu with FspSkipMpInit token enabled from Coreboot. Change-Id: I5ebe7a1338ac77a62d5aa2e48e083b4fb906bf28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cdaa95a82bc7e90637c6b90e33d88d040e085f58 Original-Change-Id: Ibdaa3d202f8f6f6f0ca6c6d4c6428f1616572f1d Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319353 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12993 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-18intel/skylake: provide default VR configurationAaron Durbin
FSP 1.8.0 will do nothing with the VR settings if VrConfigEnable is non-zero. That behavior is not desired because it's not clear what the behavior will be for various processor SKUs. Instead provide default values for the VR config. Note that PSI3 and PSI4 are not enabled for those defaults. BUG=chrome-os-partner:48466 BRANCH=None TEST=Built and booted glados. Change-Id: I02cb5fbdd4549cc827a0b0e4006bc21da4593b55 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a68c53e0fdf15584270dfafc679a22319f497d17 Original-Change-Id: I82b1d1da2cfa3c83ccc6a981e30ffac6fb6c8c4b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/318263 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-17intel/skylake: disable heci1 if psf is unlockedArchana Patni
This patch adds support for disabling the heci1 device at the end of boot sequence. Prior to this, FSP would have sent the end of post message to ME and initiated the d0i3 bit. This uses the Psf unlock policy and the p2sb device to disable the heci1 device, then lock the configuration and hide the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu or glados board. set the hecienabled policy to 0 and check for heci 1 device status in kernel lspci. CQ-DEPEND=CL:*238451 Change-Id: I26b145231f8ed0c140af42d378b222e857d9aff6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fe184b8baf1bea9bcd0af1841785a4d763af9358 Original-Change-Id: I3b435491aeea0f2ca36b7877e942dc940560e4dd Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311912 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12976 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/skylake: Add VrConfig UPD parameters from corebootRizwan Qureshi
Adding VrConfig UPDs and assign values to those from devicetree BRANCH=none BUG=chrome-os-partner:45387 TEST=Build and booted in kunimitsu CQ-DEPEND=CL:310192 Change-Id: Ifce9dfacabc742b55266c48459c56c69b1f22236 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b34a3cc77afc8795abb64972f8169986c30c2acd Original-Change-Id: Ifa960e718ed77db729f1fc4e2c00c9b305093e04 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311317 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12944 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-16intel/skylake: Enable SkipMpInit tokenRizwan Qureshi
This patch helps to enable SkipMpInit token of FSP SiliconInit UPD BRANCH=none BUG=chrome-os-partner:44805 TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB. CQ-DEPEND=CL:310869 Change-Id: I43377e4b8adadf42091a9387883363fdfbab4c1b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b7962273fd1a591cfe9a658f49ebc7d23bcad577 Original-Change-Id: I977d2d39c283d74f1aa9033c8aa60dc652735019 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310192 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/skylake: More UPD params are added for PCH policy in FSPRizwan Qureshi
Some more PCH Policy UPD Parameters are added in FSP. Lockdown config moved from FSP to coreboot. Removing settings in devicetree.cb which are zero. BRANCH=none BUG=none TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:*237842, CL:310191 Change-Id: I3dcf3a5340f3c5ef2fece2de5390cde48db4d327 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8bdb35897b640d271adcaed266030367f060553 Original-Change-Id: Ia201672565c07b2e03d972b2718512cd4fcbb95c Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310869 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12941 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-15intel/skylake: Update UPD parameters as per FSP 1.8.0Barnali Sarkar
Some MemoryInit UPD parameters have been moved to SiliconInit in FSP 1.8.0. This patch has the respective changes in coreboot for this. BRANCH=none BUG=none TEST=Build and booted in kunimitsu CQ-DEPEND=CL:*237423, CL:*237424 Change-Id: Ic008d22f96fb5f14965e5b5db15e05fb39dd52d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 573c1d8325cd504213528030ecf99559402b5118 Original-Change-Id: I71b893aa7788519ed2ef15f3247945ffcbbbcf4d Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310191 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
Instead of having many different arrays for USB configuration, with each array containing one bit of information, have one array containing all the information for each port. This way we can put the basic tuning parameters into a structure and then define structures for the basic supported configurations. The existing port definitions are taken from the Skylake HSIO tuning guide. BUG=chrome-os-partner:40635 BRANCH=none TEST=build and boot on glados, verify USB functionality in all ports. Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506 Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/306734 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27FSP 1.1: Replace soc_ prefix with fsp_Lee Leahy
Rename soc_display_upd_value to fsp_display_upd_value since the routine was moved from src/soc/intel/common into src/drivers/intel/fsp1_1. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ifadf9dcdf8c81f8de961e074226c349fb9634792 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 95238782702999a178989467694ac1f15c079615 Original-Change-Id: Ibd26ea41bd5c7a54ecd3c237f7fb7bad6dbf7d8a Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/306351 Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12157 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
Implemented Device IRQ porgramming, PxRC to IRQ mapping, GPIO IRQ routing, SCI IRQ select through UPD BUG=NONE BRANCH=NONE CQ-DEPEND=CL:*232948 TEST= build and booted sklrvp,kunimitsu with this changes. Change-Id: Ic98074491fe5251a48ed55b6fb7ef31809c3abf3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 534bd65e5df8654d745c8efe491a332336c9cdc3 Original-Change-Id: I4ea6f3cdb15d371c6023bfd046f3475290f5aa26 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291403 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12146 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/skylake: FSP 1.7.0 MemoryInit/SiliconInit params updateRizwan Qureshi
In FSP 1.7.0 SataMode and SataEnable have been moved from MemoryInit to SiliconInit. Also, GpioTablePtr has been removed. USB phy settings added to SiliconInit, Enable the configs for USB equalization settings in coreboot. Addition of serialIO UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684, chrome-os-partner:42284, chrome-os-partner:41374 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:*232947, CL:*232946, CL:*232948, CL:*232949 Change-Id: I2e8e6e32fc7074774ddcf1fb4c270bb56372b7df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 623c5a52f3afedaf2c0bfe7361cfd627d093cb73 Original-Change-Id: I8b3be2c49893c564fe2197aa32bde6323bf425e9 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303661 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12144 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
FSP should not lock CMOS unconditionally. coreboot sends Silicon UPD parameter "RtcLock" to FSP to take action on CMOS region locking/un-locking. This patch has CB generic code for creating the Silicon UPD paramater. BUG=chrome-os-partner:44484 BRANCH=none TEST=Build and booted in kunimitsu, tested using below command- When DIsabled RtcLock from devicetree in coreboot, booted to kernel and run following commands - >> crossystem fw_result=success >> crossystem | grep fw_result It should reflect the value that is set. Here, success. If ENabled RtcLock from Coreboot devicetree, The same commands will fail to update the fw_result status from crossystem utility. CQ-DEPEND=CL:*229144 Change-Id: I7f63332097cdaf6eedefbc84bec69ce4e9cc59d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c7b8293a2c55117d7ca2001ac9ec0de24d35b80b Original-Change-Id: If708e2c782644dcf7f03785d1bfa235ef5385d80 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297980 Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com> Original-Tested-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
FSP has some unique attributes which makes integration cumbersome: 1. FSP header files do not include the types they need. Like EDKII development it's expected types are provided by the build system. Therefore, one needs to include the proper files to avoid compilation issues. 2. An implementation of FSP for a chipset may use different versions of the UEFI PI spec implementation. EDKII is a proxy for all of UEFI specifications. In order to provide flexibility one needs to binding a set of types and structures from an UEFI PI implementation. 3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h file which defines it's own types. Commonality between FSP chipset implementations are only named typedef structs. The fields within are not consistent. And because of FSP's insistence on typedefs it makes it near impossible to forward declare structs. The above 3 means one needs to include the correct UEFI type bindings when working with FSP. The current implementation had the SoC picking include paths in the edk2 directory and using a bare <uefi_types.h> include. Also, with the prior fsp_util.h implementation the SoC's FSP FspUpdVpd.h header file was required since for providing all the types at once (Generic FSP 1.1 and SoC types). The binding has been changed in the following manner: 1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1 selects. No other bindings are currently available, but this provides the policy. 2. Based on CONFIG_UEFI_2_4_BINDING the proper include paths are added to the CPPFLAGS_common. 3. SoC Makefile.inc does not bind UEFI types nor does it adjust CPPFLAGS_common in any way. 4. Provide a include/fsp directory under fsp1_1 and expose src/drivers/intel/fsp1_1/include in the include path. This split can allow a version 2, for example, FSP to provide its own include files. Yes, that means there needs to be consistency in APIs, however that's not this patch. 5. Provide a way for code to differentiate the FSP spec types (fsp/api.h) from the chipset FSP types (fsp/soc_binding.h). This allows for code re-use that doesn't need the chipset types to be defined such as the FSP relocation code. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted on glados. Signed-off-by: Aaron Durbin <adubin@chromium.org> Change-Id: I894165942cfe36936e186af5221efa810be8bb29 Reviewed-on: http://review.coreboot.org/11606 Reviewed-by: Duncan Laurie <dlaurie@google.com> Tested-by: build bot (Jenkins)
2015-09-08skylake: Apply USB2 and USB3 port enable/disable settingsDuncan Laurie
The USB port enable/disable settings were never getting applied to the UPD configuration and so were not getting used by FSP. BUG=chrome-os-partner:44662 BRANCH=none TEST=build and boot on glados Change-Id: I13d4eb901215308de4b59083339832d29ce0049f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fd83caa8087cc349fa933eafac98c2563f501a4 Original-Change-Id: Ia5fa051782eeb837756a14aecb4aa626d25b2bdb Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/296034 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11547 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-27skylake: only generate ACPI cpu entries onceAaron Durbin
The acpi_fill_ssdt_generator function pointer is evaluated for each device. As there are multiple cpus in the system the acpi_fill_ssdt_generator was being called more than once creating duplicate ACPI entries because there was more than 1 cpu device. Fix this by only generating them once by removing the acpi_fill_ssdt_generator for the cpu devices, but add the generator to the cpu cluster device. BUG=chrome-os-partner:44084 BRANCH=None TEST=Built and booted on glados. Noted ACPI entries only generated once. Original-Change-Id: I695c30e6150f6d3a79d13744c532f1b658b10402 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/294240 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Change-Id: I7c85f44ba65398bda668e13db8be531535a983c5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11285 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-08-19skylake: Update Memory and Silicon Init paramsRizwan Qureshi
Update the MemoryInit and SilicoInit params as per FSP 1.3.0 release. Note: add SvGv and Rmt to Upd. BRANCH=None BUG=None TEST=Build and Boot FAB3 (Kunimitsu) CQ-DEPEND=CL:*226035, CL:*226045 Original-Change-Id: I62000f6a485fee42ef733c3b548192f2bedfce49 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291573 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Change-Id: Iaafa658b4e710fe512526a521cf6c529efb19bf0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11238 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29skylake: remove the redundant fspNotify in chip final.robbie zhang
The fspNotify(EnumInitPhaseAfterPciEnumeration) is already registered in fsp_util.c as a generic callback, this is some code left from early development. Also I don't see a need for the chip_final function, although we could keep it as a placeholder but i decided to remove it. BUG=chrome-os-partner:42979 BRANCH=None TEST=build with current fsp and the coming fsp 1.3.0, boot on sklrvp3. Change-Id: Ia892f2021be324859c344b4cb8cdeaf75f7ee32f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ae22ad57ddbab787da000ae99f85fd2b3d4092e7 Original-Change-Id: I41be566da71f80451ff70ddd8ada77bf9b8d5b1d Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/287991 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11054 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 19:44:02 +0000