summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/bootblock
AgeCommit message (Collapse)Author
2017-04-11soc/intel/skylake: Use LPSS common libraryAamir Bohra
Use lpss common library to program reset and clock register for lpss modules. Change-Id: I198feba7c6f6d033ab77ed25a5bd9ea99411a1e4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19153 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/skylake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: Ibcbaf5061e96a67815116a9f7a03be515997be6d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/skylake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-06soc/intel/skylake: Add support for GSPI controllerFurquan Shaikh
Sky Lake PCH contains two GSPI controllers. Using the common GSPI controller driver implementation for Intel PCH, add support for GSPI controller buses on Sky Lake/Kaby Lake. BUG=b:35583330 Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/intel/skylake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I0fa0a60f680b9b00b7f26f1875c553612b123a8e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18566 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/pci_devs.h: Use consistent naming in soc/pci_devs.hSubrata Banik
This patch to make common PCI device name between APL and SKL. Change-Id: I5e4c7502e9678c0a367e9c7a96cf848d5b24f68e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/common/block: Add cache as ram init and teardown codeSubrata Banik
Create sample model for common car init and teardown programming. TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED and CAR_NEM configs till post code 0x2a. Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-24soc/intel/skylake: Use C entry code for MTRR programmingSubrata Banik
Make skylake cache as ram SPI mapped MTRR programming align with apollolake code. Change-Id: I87a5c655da8ff5f6d8ef86907b7ae2263239b1ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18923 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/skylake: Fix remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-06soc/intel/skylake: Clean up CPU codeSubrata Banik
Use header (soc/intel/common/block/include/intelblocks/msr.h) for MSR macros Change-Id: I401b92cda54b6140f2fe23a6447dad89879a5ef0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-16soc/intel/skylake: Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL ↵Sooi, Li Cheng
HALO SOC Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/skylake: Move IO decode range out from pch_lpc_initTeo Boon Tiong
1. Move existing IO decode range from pch_lpc_init to early stage before SIO init. 2. At the same time, enable SIO decode range (0x2e/0x2f) for platform which use super IO. Change-Id: I72df16d0a784686d8cadfbee09b5aef60576ac43 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17337 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28soc/intel/skylake: Initialize UART based on CONFIG_UART_DEBUGTeo Boon Tiong
Current implementation checks for CONFIG_BOOTBLOCK_CONSOLE and then initializes UART. If only CONFIG_BOOTBLOCK_CONSOLE is enabled without enabling CONFIG_UART_DEBUG, there are compilation issues. This is the case when using SIO UART for Skylake DT platform. Hence initialize UART when CONFIG_UART_DEBUG is enabled and not based on CONFIG_BOOTBLOCK_CONSOLE. Also move BOOTBLOCK_CONSOLE out from UART_DEBUG to CPU_SPECIFIC_OPTIONS as part of the fix needed. Change-Id: Id422a55a68d64a06fc874bddca46b0ef5be6d596 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17349 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11soc/intel/common/lpss_i2c: simplify API and use common config structureAaron Durbin
The apollolake and skylake had duplicate stanzas of code for initializing the i2c buses. Additionally, they also had very similar structures for providing settings for the i2c speed control. Introduce a new struct lpss_i2c_bus_config and utilize it in both apollolake and skylake thereby removing the need for SoC-specific structres. The new structure is used for initializing a bus fully as the lpss i2c API is simplified in that lpss_i2c_init() is only required to be called. The struct lpss_i2c_bus_config structure is passed in for both initializing and filling in the SSDT information. The formerly exposed functions are made static to reduce the external API exposure. BUG=chrome-os-partner:58889 Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-07soc/intel/skylake: Add device id for PCH-YNaresh G Solanki
Add device id for PCH-Y used in Kaby Lake RVP3 board. Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17244 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-27skylake: Prepare GPE for use in bootblockDuncan Laurie
Export the pmc_gpe_init() function from pmc.c to pmutil.c so it can be used in bootblock, and then call it from there to initialize any GPEs for use in firmware. BUG=chrome-os-partner:58666 TEST=test working GPE as TPM interrupt on skylake board Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17135 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-16soc/intel/skylake: Enable HECI BAR for ME communicationSubrata Banik
This patch programs and enables BAR for ME (bus:0/ device:0x16/function:0) device to have early ME communication. BUG=none BRANCH=none TEST=Verified Global Reset MEI message can able to perform platform global reset during romstage. Change-Id: I99ce0ccd42610112a361a48ba31168c9feaa0332 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-30soc/intel/skylake: Include Kabylake specific IGD Device IDsBarnali Sarkar
Add Kabylake specific Graphics IDs in report_platform.c and igd.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-18soc/intel/skylake: Correct Cache as ram sizeRizwan Qureshi
DCACHE_RAM_SIZE_TOTAL is set to 0x40000 and is being used to set up CAR. Whereas DCACHE_RAM_SIZE which is set to 0x10000 is used to calculate the _car_region_end in car.ld. If the FSP CAR requirement is greater than or even close to DCACHE_RAM_SIZE then, the CAR region for FSP will be determined to be below the overall CAR region boundary i.e, out of CAR memory range. This is working with FSP 1.1 because we provide the FspCarSize and FspCarBase explicitly in a UPD. Hence, FSP is still able to use the upper region of CAR memory for its purpose. However, it will be a problem in case of FSP2.0 where FSP usable CAR is calculated using _car_region_end. So, Remove the the use of DCACHE_RAM_SIZE_TOTAL and set DCACHE_RAM_SIZE to correct value i.e, 0x40000(256KB) Change-Id: Ie2cb8bb0705a37edb3414850d7659f8a3dd6958b Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16236 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-18soc/intel/skylake: Move bootblock specific code from skylake/romstageNaresh G Solanki
There is a lot of code that is being referred to in bootblock but resides under skylake/romstage folder. Hence move this code into skylake/bootblock, and update the relevant header files and Makefiles. TEST=Build and Boot kunimitsu. Change-Id: If94e16fe54ccb7ced9c6b480a661609bdd2dfa41 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16225 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18skylake: Do FspTempRamInit only for FSP1.1 & tidy up PCH early initRizwan Qureshi
Prepare Skylake for FSP2.0 support. We do not use FSP-T in FSP2.0 driver, hence guard the FspTempRamInit call under a switch. In addition to the current early PCH configuration program few more register, so all in all we do the following, * Program and enable ACPI Base. * Program and enable PWRM Base. * Program TCO Base. * Program Interrupt configuration registers. * Program LPC IO decode range. * Program SMBUS Base address and enable it. * Enable upper 128 bytes of CMOS. And split the above programming into into smaller functions. Also, as part of bootblock_pch_early_init we enable decoding for HPET range. This is needed for FspMemoryInit to store and retrieve a global data pointer. And also move P2SB related definitions to a new header file. TEST=Build and boot Kunimitsu Change-Id: Ia201e03b745836ebb43b8d7cfc77550105c71d16 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16113 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28intel/fsp1_1: Add C entry support to locate FSP Temp RAM InitSubrata Banik
FSP temp ram init was getting called earlier from ROMCC bootblock. Now with C entry boot block, it is needed to locate FSP header and call FspTempRamInit. Hence add fsp 1_1 driver code to locate FSP Temp ram and execute. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built kunimitsu and ensure FSP Temp Ram Init return success Change-Id: If40b267777a8dc5c473d1115b19b98609ff3fd74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15787 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Add C entry bootblock supportSubrata Banik
List of activity performing in this patch - early PCH programming - early SA programming - early CPU programming - mainborad early gpio programming for UART and SPI - car setup - move chipset programming from verstage to post console BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x34 Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Do cache as ram and prepare for C entrySubrata Banik
Enable cache-as-ram and prepare for c entry in bootblock. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x2A Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3412216cdf8ef7e952145943d33c3f07949da3c1 Reviewed-on: https://review.coreboot.org/15784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
The setting of the SPI controller BAR was conditional on the nominal frequency being set. Therefore, that doesn't mean the SPI BAR is set on all boots. Move the setting of the BAR in the southbridge_bootblock_init() which is called prioer to cpu_bootblock_init(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Confirmed spibar is always set on glados. Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8 Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/319461 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-12intel/skylake: Remove check for Microcode loaded by MEMartin Roth
This method of reporting has been removed from the current Skylake ME binaries so is no longer needed. Change-Id: I774982146c19f37418f5aee29ae8883fcd3d0c8c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12854 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR, we also remove the _MSR suffix, as they are, by definition, MSRs. Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-11skylake: Leave SPI controller enabledLee Leahy
Leave the SPI controller enabled upon boot block exit. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: I5b10d7cc8d5d350282206abe6a945bab66f97ada Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11skylake: SPI code cleanupLee Leahy
Move base address into iomap.h. Use PCI symbols instead of SPI specific symbols. Fix comments. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: Id5d21603150b52fd1b71dd448105938bd6aff1a9 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11826 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: fix garbled patch from upstreamAaron Durbin
In the review process for http://review.coreboot.org/#/c/11052/ the code was mangled and the result was unbuildable code. Fix this. BUG=chrome-os-partner:43419 BRANCH=None TEST=Can actually build bootblock. Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289788 Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-29Skylake: Fix microcode reload in bootblock cpu initRizwan Qureshi
If Skylake microcode is being loaded from FIT, Skylake supports the PRMRR/SGX feature. If this is supported the FIT microcode load will set the msr (0x08b) with the patch ID one less than the ID in the microcode binary. This results in microcode getting reloaded again in the bootblock cpu init. Avoid the microcode reload by checking for PRMRR support. BUG=chrome-os-partner:42046 BRANCH=None TEST=Built for glados and tested on RVP3 Change-Id: I06e59f5cad549098c7ba2dfa608cd94a0b3f0ae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6242b9dea283149bd0c968af1ba186647d37162d Original-Change-Id: Iea5a223aa625be3fc451e8ee5d3510f548b07f8b Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286054 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11052 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>