summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/acpi
AgeCommit message (Collapse)Author
2016-11-07soc/intel/skylake: Add _ACx methods for TSR0 sensor for fan controlSumeet Pawnikar
This patch updates below info, [1] Delete the DPTF_CPU_ACTIVE_AC* values because these are not being used. Hence, removing unnecessary defines. [2] Add new DPTF_TSR0_ACTIVE_AC* temperature trip points for TSR0 external thermal sensor. These trip points are being used by _ACx methods to control the fan speed on Skylake-U fan based Lars and Kunimitsu platforms. [3] Follow up patches are using DPTF_CPU_ACTIVE_AC* temperature trip points in board specific acpi/dptf.asl (for lars, kunimitsu, etc) to control the fan speed as per the CPU temperature trip points. [4] Newly added _ACx methods for thermal sensor TSR0 in this patch has nothing to do with DPTF_CPU_ACTIVE_AC*. We can control fan speed using various different thermal sensors. In this patch, we have added new _ACx methods for TSR0 thermal sensor. We run the fan at different speeds to cool down the system at different TSR0 temperatures. Similarly, we considered CPU sensor temperature values and ran the fan at different speeds to cool down the system. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified these _ACx methods with _ART table on these boards with different workloads. Change-Id: Ia7b81e03da936c4a0f69057e43f18efd7c3b9f17 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332368 Reviewed-on: https://review.coreboot.org/17067 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07soc/intel/skylake: Avoid use of variable Local0 in TEVT in thermal.aslNaresh G Solanki
Avoid use of Local0 variable in TEVT acpi method. If mainboard doesn't expose any thermal sensor, then warning is generated for variable Local0 not been used. Change-Id: I0634961a01144e41a8480c8c6ed8b7fdd358e768 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17245 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-26intel/skylake: Add support to enable wake-on-usb attach/detachFurquan Shaikh
Three things are required to enable wake-on-usb: 1. 5V to USB ports should be enabled in S3. 2. ASL file needs to have appropriate wake bit set. 3. XHCI controller should have the wake on attach/detach bit set for the corresponding port in PORTSCN register. Only part missing was #3. This CL adds support to allow mainboard to define a bitmap in devicetree corresponding to the ports that it wants to enable wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in PORTSCN would be set by xhci.asl for the appropriate ports. BUG=chrome-os-partner:58734 BRANCH=None TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb attach/detach. Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17056 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08soc/intel/skylake: Clean up SoC ASL code.Barnali Sarkar
List of changes done here in this patch 1. Remove CARD definition from EMMC and SD Card Controller in scs.asl since _RMV method does not get evaluated while setting up removable attribute in sysfs in kernel. "cat /sys/block/mmcblk1/removable" this command always returns 0. This CARD Device includes _ADR which follows SDIO Bus format. But, SD/EMMC sits on PCI Bus. Hence this CARD Device specific _ADR code is also not needed. 2. Remove Base Address for ACPI debug output memory buffer in systemagent.asl as it is not getting used throughout the code. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: I29effaffdafcc21e26445ec3c54aedecdbc50274 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16068 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-04soc/intel/skylake: Correct address of I2C5 DeviceBarnali Sarkar
This corrects the address of the I2C5 Device. The I2C Controller #5 is on PCI Bus 0: Device 25: Function 1. The ACPI Address Encoding Logic is - High word = Device #. Low word = Function #. So, I2C5 (_ADR) = 0x0019 0001. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: I4719a843260ef58cc2307e909e9ccbffea519177 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16048 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-29skylake: fix VSDIO is at 0.8V when SDCard is not insertedZhuo-hao.Lee
1. Enable SoC SD_CMD/D* signals pull-down of 20k when SD-card is removed. When SD-card is disconnected, the pull-down is disabled. 2. Provide path for weak leakage from buffers of SD_CMD/D* signal to be grounded. Thus dropping voltage on the SD_CMD/D* signals to ~0V. BUG=chrome-os-partner:54421 TEST=no power leakage when SDCard isn't inserted on skylake platform Change-Id: I567199b172841125f8916a61a76005cfdaa62eb8 Signed-off-by: Zhuo-hao.Lee <zhuo-hao.lee@intel.com> Reviewed-on: https://review.coreboot.org/15910 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-01skylake: Generate ACPI timing values for I2C devicesDuncan Laurie
Have the Skylake SOC generate ACPI timing values for the enabled I2C controllers instead of passing it in the DSDT with static timings. The timing values are generated from the controller clock speed and are more accurate than the hardcoded values that were in the ASL which were originally copied from Broadwell where the controller is running at a different clock speed... Additionally it is now possible for a board to override the values using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then the kernel will generate its own timing using the same forumla, but if the SDA hold time value is zero the kernel will NOT generate a correct value and the SDA hold time may be incorrect. This was tested on the Chell platform to ensure all the I2C devices on the board are still operational with these new timing values. Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08skylake: Add and fill out CID1 NVS fieldDuncan Laurie
Add a country identifier field to NVS and populate it with the call to wifi_regulatory_domain() which will (by default) do a lookup for the 'region' identifier in VPD on a Chrome OS device. BUG=chrome-os-partner:50516 BRANCH=glados TEST=build and boot on chell Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2 Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329295 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13839 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-15skylake: acpi: Make GRXS method serializedDuncan Laurie
This method creates a named object and should be serialized to avoid a compiler warning from recent iasl releases. BUG=chrome-os-partner:40635 BRANCH=glados TEST=emerge-chell coreboot with no iasl warnings Change-Id: If54df4eca8849a8d278816712164b30a775a41ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9aa8c5627276be08bf0dc3d0f4b9b7bd3f40c227 Original-Change-Id: Ieb05525503bf61c9922677484aba5479856a3f35 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/326843 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13689 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/skylake: Add kconfig option to skip Native SD ControllerSubrata Banik
Skylake Core boot should have configurable option to skip PCH based SD 3.0 Controller from customer/reference design. Addition to that no unused or unnecessary should list under device view. BUG=chrome-os-partner:48190 BRANCH=None TEST=Build & boot Kunimitsu and LARs. Change-Id: Ie17fd6db01e0cabcdf605017509d809b54509a0d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 99ac17b723125822368539d0562aa35119e520fb Original-Change-Id: I98a48f45ef442246227fd54ea021b53f824954c5 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315420 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12946 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/skylake: Add GPIO ACPI Apis.Subrata Banik
GPIO ASL APIs to get GPIO Value. Need such APIs to read GPIO config settings. Example: Kunimitsu need to read AUDIO_DB GPIO to identify codec select. BUG=chrome-os-partner:44481 BRANCH=none TEST=build and boot on Kunimitsu. Change-Id: If56bb7b3eae08e1949d372850a6426dfde5aadd0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4983ba835a8da2baf578b035ae482755983c1ecb Original-Change-Id: Ia40d86c8d4b14857fa8822677b3f7d393a35b677 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316352 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12956 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03intel/skylake: Add ACPI device for audio controllerDuncan Laurie
Add the audio controller device to ACPI and define the _DSM handler to return the address of the NHLT table, if it has been set in NVS. BUG=chrome-os-partner:47346 BRANCH=none TEST=build and boot on glados and chell Change-Id: I8dc186a8bb79407b69ef32fb224a7c0f85c05bc4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6b73fba375f83f175d0b73e5e70a058a6c259e0d Original-Change-Id: Ia9bedbae198e53fe415adc086a44b8b29b7f611d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313824 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05intel/skylake: Add Fan control supportSumeet Pawnikar
This patch adds the ASL file for Fan as cooling device /participant for thermal active cooling action for DPTF on SKL-U fan based kunimitsu board. With active cooling policy (_ART), we can control the fan on/off and speed. BRANCH=None BUG=chrome-os-partner:46493 TEST=Built for kunimitsu board. Tested to see that the thermal devices and the participants are enumerated and can be seen in the /sys/bus/platform/devices. Also, checked the FAN type the cooling devices enumerated in the /sys/class/thermal with sysfs interface. Change-Id: Iacfd9152e300ec47895c29deab2c9d4361230849 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d37a089b5196f02cb95f16083c416456e96d54a4 Original-Change-Id: I8293bfe2a2bf213b69fbb4223bbfcf508a9cf0bf Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/307027 Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12322 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27intel/skylake: IRQ programming through UPDSubrata Banik
Implemented Device IRQ porgramming, PxRC to IRQ mapping, GPIO IRQ routing, SCI IRQ select through UPD BUG=NONE BRANCH=NONE CQ-DEPEND=CL:*232948 TEST= build and booted sklrvp,kunimitsu with this changes. Change-Id: Ic98074491fe5251a48ed55b6fb7ef31809c3abf3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 534bd65e5df8654d745c8efe491a332336c9cdc3 Original-Change-Id: I4ea6f3cdb15d371c6023bfd046f3475290f5aa26 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291403 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12146 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-14skylake: ACPI: Fix compiler warnings with iasl-20150717Duncan Laurie
Updating to a new IASL introduces a lot of warnings that are not serious issues but can be fixed with some reworks. - Method local variables that are set but never used now warn, when needing to read back a register the ordering is now changed to set the value in Local0 first so the compiler does not complain. - Methods that create an object must be serialized - A ResourceTemplate declared inside a _CRS with a named variable does not seem to be able to compile without a warning. To fix this move the ResourceTemplate outside the _CRS method. - The DPTF CPU code was still using the old legacy \_PR.CPUx instead of the new \_PR.CPxx definitions. BUG=chrome-os-partner:44622 BRANCH=none TEST=build glados with iasl-20150717 and see no warnings Original-Change-Id: I4a66c7eb6495aac4ae1aa42100c846725c1a04d2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302168 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia3af802ca2faab4f1c59e73f2ce31a65c7e862e0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11812 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-09-28skylake: Work around issue in ACPI interpreterDuncan Laurie
There appears to be an issue that is causing this particular bit of ACPI code to be incorrectly interpreted by the kernel and the IASL disassembler. Ensuring the PCRB() method is defined in the DSDT before any uses of it appears to fix the problem, but that relies on specific ordering of the ASL files included by pch.asl and may break again in the future if the includes were re-ordered. (they are alphabetic now) So in this case to work around the issue unroll the function call so the admittedly messy calculation is reduced to a constant when compiled. Note this issue was observed with both iasl-20130117 and iasl-20150717. ACPICA bug: https://bugs.acpica.org/show_bug.cgi?id=1201 BUG=chrome-os-partner:45760 BRANCH=none TEST=verify disassembled AML is correct Change-Id: I7b6a3b792f79755db0ea7b9f2ef6ee7f5000e018 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ecacc340d6e1068ea649f0859657bb3208695730 Original-Change-Id: I232523f5b6ce290da6e7d99405a53b9437b10e0d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302167 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-28skylake: ACPI: Remove Configurable TDP support codeDuncan Laurie
Remove the CTDP support code that is in ACPI. It has been ported from haswell and while the MCHBAR register interface does seem to still exist the calculations for determining PL2 is no longer straightforward. Additionally nothing is using this interface and the expectation is that DPTF will be used for throttling with PL[1234] and having ACPI interfere with the configuration would not be good. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I81e356ddf564a5253458b82bc3327bfb573ab16d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 884ee9a764bad0b3b4bcaeb5a3f46c5f090a116c Original-Change-Id: I284ab52a305cee25c88df5228b01ff1e9544efe3 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302166 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11719 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-17skylake: Use common ACPI _SWS codeDuncan Laurie
Enable and use the common code for filling out the NVS data used by the _SWS methods. Add a function to provide the wake source data. With Deep S3 enabled skylake does not retain the contents of the PM1_EN register so instead just select the wake related events in PM1_STS. BUG=chrome-os-partner:40635 BRANCH=none TEST=tested on glados by checking for valid _SWS string in /sys/firmware/log after suspend/resume. Wake sources that were tested are RTC, power button, keypress, trackpad, and wifi. Change-Id: I93a4f740f2e2ef1c34e948db1d8e273332296921 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cb4d4705b87ef7169f1979009c34a58de93c4ef0 Original-Change-Id: Ib6b4df09ea3090894f09290d00dcdc5aebc3eabb Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298169 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11648 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09skylake: dptf: Add TSR3 thermal sensor and CPU code cleanupDuncan Laurie
- glados has more thermal sensors that could be used so add another entry in the DTPF thermal sensor ACPI code. - fix indentation block in cpu.asl. - declare \_SB.MPDL as external (it is already CondRefOf) so it does not need to be present in mainboard config if the mainboard does not want to override the default. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I1afe7013a24ee1215f5e968e25594f746bbdd17c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d357437d06349039a94869b088c3c50b32933c0 Original-Change-Id: Ie87d52e735bf930a003e525cf1918789920922a5 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297335 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11558 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-09intel/skylake: ACPI: Clean up formatting in and fix ASL codeDuncan Laurie
Clean up the formatting in various ASL files and remove unused and/or incorrect field definitions. Add back the methods to set the USB power in S3 field in NVS as it is called by the chromium kernel at boot and is currently complaining that the method is not found. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I9726fb337bf53fa7dce72c5f30524b58abb4cab6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3a47eeba2792c3abed07be175034c709dbf60879 Original-Change-Id: I8e8388c9b834fd060990f8e069929ba829e29ab6 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295952 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11539 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Clean up GPIO controllerDuncan Laurie
Switch the GPIO controller to use the PCR functions that are defined in pcr.asl. Have the default memory regions declare a size of zero and be fixed up in the _CRS in order to fix compile issues on some versions of iasl. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: Ic82fcb00285aeb2515e24001ef69a882c3df1417 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: be24d9ccd9db62ca694f3a67436af25a73f59c5a Original-Change-Id: I13acd891427f467e289d5671add5617befef4380 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295951 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Clean up and fix XHCI ACPI DeviceDuncan Laurie
- Remove the old workarounds for XHCI from broadwell - Add PMC device to expose bits needed for XHCI workarounds - Implement the new workarounds for XHCI, the first will set a bit in the XHCI MMIO and the second will send a message to the PMC if a bit is set indicating the workaround is available. - Clean up the HS/SS port defines and remove unnecessary methods to determine the port count since we only support SPT-LP. BUG=chrome-os-partner:44622,chrome-os-partner:44518 BRANCH=none TEST=build and boot on glados, verify that D0 and D3 can be made to work (by disabling unused USB and the misbehaving camera) Change-Id: I535c9d22308c45a3b9bf7e4045c3d01481acc19c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a945f8bc2976d57373be2305c5da40a5691f1e88 Original-Change-Id: I7a57051c0a5c4f5408c2d6ff0aecf660100a1aec Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295950 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11537 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Remove SerialIO ACPI mode codeDuncan Laurie
Skylake moves back to having SerialIO devices be enumerated as PCI devices instead of putting them all in ACPI mode. There is currently no code that populates the device_nvs fields so all the ACPI code to support that is dead. Additionally because it contains _PS0/_PS3 methods that causes the kernel to not use the standard PCIe PME handlers and results in confusing messages at boot about not being able to transition to a non-D0 state from D3. BUG=chrome-os-partner:44622 BRANCH=none TEST=build and boot on glados and ensure I2C devices work Change-Id: Id0112830211707ba3d67d4dda29dd93397b5b180 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f7dddad9c2269abd292346e35ebd0b4ca2efe72b Original-Change-Id: Ie5e40b5d73cd3a4d19b78f0df4ca015dccb6f5f6 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295909 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11536 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Move storage controllers to separate fileDuncan Laurie
Move the storage controller devices out of serialio.asl and into a new scs.asl file and implement the power gating workarounds for D0 and D3 transitions. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I43081e661b7220bfa635c2d166c3675a0ff910d6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e0c67b386974dedf7ad475c174c0bc75dc27e529 Original-Change-Id: Iadb395f152905f210ab0361121bbd69c9731c084 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295908 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11535 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Remove itss.asl and cleanup irqlinks.aslDuncan Laurie
Move the itss.asl code that was exporting PIRQ routing control registers into irqlinks.asl and use the PCR access methods to find the appropriate address. At the same time clean up the code in irqlinks.asl to follow formatting rules. Also now that the GPIO code in itss.asl is unused the file can be removed. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I1af7d730542fd0e79b9f3db9f0796e7c701c59e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39a96063d01d00ab768db1c723f78b5af9ed6513 Original-Change-Id: Iafa03c276cb276ec8c00c24ed2dba48d0dc9612b Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295907 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11534 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Add functions for PCR accessDuncan Laurie
There are a few places in ACPI that touch PCR registers, either to read a value or to set some magic bits. Expose some functions for this that will keep all the PCR access in one location instead of spread throughout the code. BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: Iafeb3e2cd8f38af10d29eaaf18f2380c5651fe6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e78b2801fbc5c00ba452ae5e4ecb07c3e23bf6c1 Original-Change-Id: I2e4d491157f7ac6d2ebc231b11661c059b4a7fa0 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295904 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11531 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Clean up pch.aslDuncan Laurie
Clean up the code in pch.asl: - move all the C header includes into here instead of duplicated in various ASL files included from here - move the trap field definition into platform.asl with the method - alphebetize the includes - move gpio.asl include into pch.asl - remove duplicate irqlinks.asl include from lpc.asl BUG=chrome-os-partner:44622 BRANCH=none TEST=emerge-glados coreboot Change-Id: I51b1c5286fc344df6942a24c1dea71abf10ab561 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3ee9c4afa031191d275f0d3d40b2b15b85369b2f Original-Change-Id: I3bae434ad227273885d8436db23e17e593739f77 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295903 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11530 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08skylake: ACPI: Fix and clean up PCIE _PRT entriesDuncan Laurie
Fix the code for PCIE _PRT entries to use an actual root port number from the device instead of NVS that was never initialized from zero. BUG=chrome-os-partner:44622 BRANCH=none TEST=build and boot on glados with pci=nomsi to ensure interrupts work Change-Id: I76ff07d2bf7001aed504558d55cca9e19c692d7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d43392199ec5f37150f2b13732924c47b8dc830c Original-Change-Id: I1132f1dc47122db08d1b798a259ee9b52a488f5e Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295902 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11529 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/skylake: Add support for DPTFShilpa Sreeramalu
This patch adds the ASL files with the DPTF related settings and the thermal devices enabled in the SOC. It also enables the DPTF setting at the global NVS level. BRANCH=None BUG=chrome-os-partner:40855 TEST=Built for kunimitsu board. Tested to see that the thermal devices and the participants are enumerated and can be seen in the /sys/bus/platform/devices. Also checked the temperature readings of the cooling devices and the thermal zones enumerated in the /sys/class/thermal. Change-Id: I8ad044eaf1ad488fb1682097da83b40d2bede414 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 7624eeca19b4f286b30c3d4ac5b44c5e9619c2c7 Original-Change-Id: I0d92ef42cff5567ea6fc566730588802d8549ce0 Original-Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/293391 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11430 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/skylake: Clean up Serial IO DMA channelsArchana Patni
This patch removes FixedDMA channels carryover code from BDW as in SKL Integrated DMA is present for each serial io controller. BRANCH=None BUG=BUG=chrome-os-partner:40383 TEST=Build and Boot kunimitsu. Tested IDMA on UART. Change-Id: I66c869d310febcda430809d194b53a903a21fd99 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 833a1980329fb03cf487482e9276c076ede0a0fa Original-Change-Id: If6ce19cd8d60c727c8f2ffcd9bb232521df63f08 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/293060 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11415 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-14Skylake: Add ASL code to enable GPIO controllerArchana Patni
This patch enables GPIO controller for skylake. It adds community base addresses and offset for Community0, Community1, and Community3. Community2 is not exposed in BIOS or enabled in the kernel driver. Also, clean up the carry over GWAK implementation from BDW. BRANCH=None BUG=chrome-os-partner:42393 TEST=cat /sys/kernel/debug/gpio should list of GPIOs TEST=export a GPIO pin using /sys/class/gpio/export Original-Change-Id: I891c40589d3dbd796cf593626472c7b5674a1ae0 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291230 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Change-Id: I7481ce682ccae872fddf81b3188c3415d5d3f7d9 Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-on: http://review.coreboot.org/11191 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fix invalid GNVS base addressAaron Durbin
Leaving a sentinel 0xC0DEBABE and fixing it up is is the old way of setting the correct base address for GNVS. One just needs to reference NVSA which is already filled in by the skylake ACPI code. BUG=chrome-os-partner:43611 BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. /sys/firmware/log shows up as well as ramoops using the correct address. Original-Change-Id: I1d4979b1bb65faa76316a4ec4c551a7b9b9eed32 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290338 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I25efea73a383215f9365ce91230f79516b0201a6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11185 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-17skylake: remove whitespace from ASL filesStefan Reinauer
Found by the commit hooks. Change-Id: I9baa90ca0111ddc9cb69cbb7dd17f63e8a98a04f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:37:55 +0000