summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/Makefile.inc
AgeCommit message (Collapse)Author
2017-03-28soc/intel/common/block: Add cache as ram init and teardown codeSubrata Banik
Create sample model for common car init and teardown programming. TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED and CAR_NEM configs till post code 0x2a. Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-23soc/intel/skylake: Add SGX initializationRobbie Zhang
This patch implements SGX initialization steps in coreboot per Intel SGX BWG rev 2.0.8 for Kaby Lake SoC. If enabled on a Kabylake device, SoC capability and PRM (processor reserved memory) of desired size (needs to be configured through PrmrrSize) are provisioned for later software stack to use SGX (i.e., run SGX enclaves). One issue is still puzzling and needs to be addressed: by calling configure_sgx() in cpu_core_init() which is the per-thread function, SGX is always failing for thread 0 but is successful for other 3 threads. I had to call configure_sgx() again from soc_init_cpus() which is the BSP-only function to make it enable on the BSP. Another pending work is the implementation for the Owner Epoch update which shall be added later. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified SGX activation is successful on all threads. Change-Id: I8b64284875eae061fa8e7a01204d48d320a285a9 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18445 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/skylake: Use intel/common/xhci driverSubrata Banik
Change-Id: I7bd83d293fcc1848f6f64526d8f38d010c1f69a3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18223 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22soc/intel/skylake: Include I2C code in romstageDuncan Laurie
The lpss_i2c driver is enabled in romstage, so the SOC needs to export the pre-ram compatible I2C controller info, which for skylake is in the bootblock/i2c.c file. This was not causing a compiler error in normal use, but when adding I2C debug code in romstage it failed to compile. With this added, I can now do I2C transactions in romstage. Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23soc/intel/skylake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCh=None TEST=Compiles successfully for chell and eve. Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-23soc/intel/skylake: Define early smbus functionsNaresh G Solanki
Define early smbus functions that can be used by mainboard to fetch spd. Change-Id: Id170b2b8e6fb3ebb147f37bf433a27d1162dc11c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17433 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-07soc/intel/skylake: Fix SATA booting to OS issueSubrata Banik
SATA device remains unrecognized if connected at Port 2. Port control and Status register (PCS) is by default set by hardware to the disabled state as a result of an initial power on reset. OS read PCS register during boot causes disabling of SATA ports and can't detect any devices. BRANCH=none BUG=chrome-os-partner:59335 TEST=Build and boot SKL from SATA device connected at Port 2. Change-Id: I4866ca44567f5024edaca2d48098af5b4c67a7ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-28soc/intel/skylake: put back uart_debug.c into verstageAaron Durbin
uart_debug.c was accidentally dropped in verstage in 64ce1d122c0464a4ef138fb7452a91b408b1a7c2 (https://review.coreboot.org/17136). Fix that. Change-Id: If37a028550d419bada80d157c4de02fd82d26c89 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17175 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-10-27skylake: Support for early I2C TPM driverDuncan Laurie
Add the SOC definition for acpi_get_gpe() so it can be used by the I2C TPM driver. Also add the I2C support code to verstage so it can get used by vboot. BUG=chrome-os-partner:58666 TEST=boot with I2C TPM on skylake board Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17136 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-16soc/intel/skylake: Implement Global Reset MEI messageSubrata Banik
As per ME BWG, there are two mechanism to generate a Global Reset (resets both host and Intel ME), one is through CF9h IO write of 6h or Eh with "CF9h Global Reset" (CF9GR) bit set, PMC PCI offset ACh[20]. Another is to issue the Global Reset MEI message. Because any attempts to cause global reset without synchronizing the two sides might cause unwanted side effects, such as unwritten flash data that will get destroyed if the host were to cause a global reset without informing Intel ME firmware, the recommended method is to send a Global Reset MEI message when the following conditions are met: The PCH chipset firmware just needs to complete the Intel ME Interface #1 initialization and check the Intel ME HFSTS state if Intel ME is not in ERROR state and is accepting MEI commands then firmware should be able to use Global Reset MEI message to trigger global reset. Furthermore, if Intel ME is in ERROR state, BIOS can use I/O 0xCF9 write of 0x06 or 0x0E command with PCH ETR3 register bit [20] to perform the global reset. BUG=none BRANCH=none TEST=Verified Global Reset MEI message is able to perform platform global issue in ME good state. Change-Id: If326a137eeadaa695668b76b84c510e12c546024 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16902 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31skylake: Add initial FSP2.0 supportRizwan Qureshi
Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-24soc/intel/skylake: align chromium Chrome OS configAaron Durbin
The chromium tree is currently using a different config for Chrome OS than what is being built in coreboot.org. Align those settings to reflect how skylake Chrome OS boards are actually shipped to provide proper parity between coreboot.org and chromium. Change-Id: I7ab9c1dfa8c6be03ac2125fb06cb7022f3befa97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16313 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-19soc/intel/skylake: make SPI support early stagesAaron Durbin
Using malloc() in SPI code is unnecessary as there's only one SPI device that the SoC support code handles: boot device. Therefore, use CAR to for the storage to work around the current limiations of the SPI API which expects one to return pointers to objects that are writable. Additionally, include the SPI support code as well as its dependencies in all the stages. BUG=chrome-os-partner:56151 Change-Id: I0192ab59f3555deaf6a6878cc31c059c5c2b7d3f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16196 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2016-08-18soc/intel/skylake: Move bootblock specific code from skylake/romstageNaresh G Solanki
There is a lot of code that is being referred to in bootblock but resides under skylake/romstage folder. Hence move this code into skylake/bootblock, and update the relevant header files and Makefiles. TEST=Build and Boot kunimitsu. Change-Id: If94e16fe54ccb7ced9c6b480a661609bdd2dfa41 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16225 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR)Martin Roth
The variable MAINBOARD_DIR already has the quotes stripped off. Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/16117 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02intel/skylake: Fix UART build optionsFurquan Shaikh
1. skylake does not support UART over I/O. So, NO_UART_ON_SUPERIO needs to be selected by default. 2. Move BOOTBLOCK_CONSOLE under UART_DEBUG. 3. Include bootblock/uart.c only if UART_DEBUG is selected. Change-Id: I4e996bea2a25b3b1dfb9625d97985a9d3473561b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16025 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28soc/intel/skylake: Add C entry bootblock supportSubrata Banik
List of activity performing in this patch - early PCH programming - early SA programming - early CPU programming - mainborad early gpio programming for UART and SPI - car setup - move chipset programming from verstage to post console BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x34 Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Do cache as ram and prepare for C entrySubrata Banik
Enable cache-as-ram and prepare for c entry in bootblock. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x2A Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3412216cdf8ef7e952145943d33c3f07949da3c1 Reviewed-on: https://review.coreboot.org/15784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25intel/skylake: Select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOTFurquan Shaikh
This allows the board to save the recovery request in case of unexpected reboots caused by FSP. With recovery module in vboot handling the saving of recovery reason across reboots, there is no need to have special fsp reset handling under soc. BUG=chrome-os-partner:55431 Change-Id: I0b7ce14868a322072d3e60c1dae43f211b43fdbf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15804 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add SD card device to configure card detect GPIODuncan Laurie
Add a PCI driver for the skylake SD card device and have it generate an entry in the SSDT for the card detect GPIO if it is provided by the mainboard in devicetree. This sets up a card detect GPIO configuration that will trigger an interrupt on both edges with a 100ms debounce timeout and can wake the SD controller from D3 state. The GpioInt() entry is bound to the "cd-gpio" device property which will be consumed by the kernel driver. The resulting ACPI output in the SSDT will be combined with the SDXC device declaration in the DSDT. Example: Scope (\_SB.PCI0.SDXC) { Name (_CRS, ResourceTemplate () { GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 10000, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 35 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "cd-gpio", Package () { \_SB.PCI0.SDXC, 0, 0, 1 } } } }) } Change-Id: Ie4c1bfadd962cf55a987edb9ef86e92174205770 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add Audio DSP deviceDuncan Laurie
Add the Audio DSP device for skylake as a PCI driver with a static scan_bus handler so generic devices can be declared under it. This is for devices like the Maxim 98357A which is connected on the I2S bus for data but has no control channel bus and instead just has a GPIO for channel selection and power down control and needs to describe that GPIO connection to the OS via ACPI. Change-Id: Iae02132ff9c510562483108ab280323f78873afd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31skylake: Add I2C devicesDuncan Laurie
Add the I2C devices to skylake with the scan_bus handler for SMBUS devices so that I2C-based devices can be declared in devicetree.cb and get initialized properly during ramstage. This does not yet provide the I2C driver, but it allows for devices that are declared in devicetree.cb to provide ACPI tables to the OS. Change-Id: I9dfe4a06a8b0bc549a2b0e2d7c033c895188ba30 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14992 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04intel/skylake: Display ME firmware status before os bootDhaval Sharma
Display ME firmware status before os boot. Specifically this patch reads out the ME hfsts1 and hfsts2 status registers that provide information about overall ME health before device gets disabled. This change reused most of the code from bdw me_status implementation. BUG=chrome-os-partner:47384 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2 Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1 Original-Credits-to: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323260 Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18intel/skylake: provide default VR configurationAaron Durbin
FSP 1.8.0 will do nothing with the VR settings if VrConfigEnable is non-zero. That behavior is not desired because it's not clear what the behavior will be for various processor SKUs. Instead provide default values for the VR config. Note that PSI3 and PSI4 are not enabled for those defaults. BUG=chrome-os-partner:48466 BRANCH=None TEST=Built and booted glados. Change-Id: I02cb5fbdd4549cc827a0b0e4006bc21da4593b55 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a68c53e0fdf15584270dfafc679a22319f497d17 Original-Change-Id: I82b1d1da2cfa3c83ccc6a981e30ffac6fb6c8c4b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/318263 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-17intel/skylake: During RO mode after FSP reset CB lose original stateSubrata Banik
CB used to clear recovery status towards romstage end after FSP memory init. Later inside FSP silicon init due to HSIO CRC mismatch it will request for an additional reset.On next boot system resume in dev mode rather than recovery because lost its original state due to FSP silicon init reset. Hence an additional 1 reset require to identify original state. With this patch, we will get future platform reset info during romstage and restore back recovery request flag so, in next boot CB can maintain its original status and avoid 1 extra reboot. BUG=chrome-os-partner:43517 BRANCH=none TEST= build and booted Kunimitsu and tested RO mode Change-Id: Ibf86ff2b140cd9ad259eb39987d78177535cd975 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 40ddc21a97b318510116b7d5c4314380778a40f7 Original-Change-Id: Ia52835f87ef580317e91931aee5dd0119dea8111 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302257 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12975 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/skylake: add nhlt supportAaron Durbin
The use of a NHLT table is required to make audio work on the skylake SoCs employing the internal DSP. The table describes the audo endpoints (render vs capture) along with their supported formats. These formats are not only dependent on the audio peripheral but also hardware interfaces. As such each format has an associated blob of DSP settings to make the peripheral work. Lastly, each of these settings are provided by Intel and need to be generated for each device's hardware connection plus mode/format it supports. This patch does not include the dsp setting blobs. The current supported connections: - digital mic array 2 channel - digital mic array 4 channel - Maxim 98357 amplifier - ADI ssm4567 - NAU88L25 headset codec BUG=chrome-os-partner:44481 BRANCH=None TEST=Built glados. Speakers, headphones, and mic on camera decently worked. CQ-DEPEND=CL:*239598 Change-Id: If1a9be97573b9b160893944661790cac7df26fca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1f5514e27811c500732de97e1cc7edeced2607e7 Original-Change-Id: Ib42e895f00e7605cb30ce24d9b8dd00bf68a7477 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313998 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12938 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-16intel/skylake: Work around ROMCC optimization bugStefan Reinauer
On Skylake systems, the bootblock fails to compile with the following error message: bootblock_simple.c:6.1: 0x13930e0 copy Internal compiler error: non dominated rhs use point 0x13a3f70? Aborted (core dumped) The option -fno-simplify-phi works around the issue, but will cause the code to use more registers, hence we also need to enable -mcpu=p4 (see intel/truxton mainboard for another example of where this has been done in the past) Change-Id: Iea1a1ba18d76c7323bb626c5f4b0032e4ee04a86 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12719 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-04braswell/skylake: Add FspUpdVpd.h to fix compilationStefan Reinauer
Imported from cros repo 18ae19c Change-Id: Ib88ac9b37d2f86d323b9a04cb17a5a490c61ff5b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12467 Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins)
2015-10-11skylake: add support for verstageAaron Durbin
The right files just need to be added to the verstage build. Do that so a stand alone verstage builds and links. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11827 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
Using a copiler to compile something that's already a binary is pretty stupid. Now that Stefan converted most microcode in blobs to a plain binary, use the binary version. Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11607 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29skylake: select HAVE_INTEL_FIRMWAREAaron Durbin
Use the common ME and descriptor code. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados Change-Id: I7196f587b92fd26129b30e2cd73f4caf5f4ebef8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11735 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
FSP has some unique attributes which makes integration cumbersome: 1. FSP header files do not include the types they need. Like EDKII development it's expected types are provided by the build system. Therefore, one needs to include the proper files to avoid compilation issues. 2. An implementation of FSP for a chipset may use different versions of the UEFI PI spec implementation. EDKII is a proxy for all of UEFI specifications. In order to provide flexibility one needs to binding a set of types and structures from an UEFI PI implementation. 3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h file which defines it's own types. Commonality between FSP chipset implementations are only named typedef structs. The fields within are not consistent. And because of FSP's insistence on typedefs it makes it near impossible to forward declare structs. The above 3 means one needs to include the correct UEFI type bindings when working with FSP. The current implementation had the SoC picking include paths in the edk2 directory and using a bare <uefi_types.h> include. Also, with the prior fsp_util.h implementation the SoC's FSP FspUpdVpd.h header file was required since for providing all the types at once (Generic FSP 1.1 and SoC types). The binding has been changed in the following manner: 1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1 selects. No other bindings are currently available, but this provides the policy. 2. Based on CONFIG_UEFI_2_4_BINDING the proper include paths are added to the CPPFLAGS_common. 3. SoC Makefile.inc does not bind UEFI types nor does it adjust CPPFLAGS_common in any way. 4. Provide a include/fsp directory under fsp1_1 and expose src/drivers/intel/fsp1_1/include in the include path. This split can allow a version 2, for example, FSP to provide its own include files. Yes, that means there needs to be consistency in APIs, however that's not this patch. 5. Provide a way for code to differentiate the FSP spec types (fsp/api.h) from the chipset FSP types (fsp/soc_binding.h). This allows for code re-use that doesn't need the chipset types to be defined such as the FSP relocation code. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted on glados. Signed-off-by: Aaron Durbin <adubin@chromium.org> Change-Id: I894165942cfe36936e186af5221efa810be8bb29 Reviewed-on: http://review.coreboot.org/11606 Reviewed-by: Duncan Laurie <dlaurie@google.com> Tested-by: build bot (Jenkins)
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-08skylake: allow timer_monotonic_get() in all stagesAaron Durbin
The timer_monotonic_get() function wasn't being compiled for romstage. To simplify the implementation don't keep track of partial microsecond ticks and just return the MSR value divided by 24 (24MHz clock). BUG=chrome-os-partner:42115 BRANCH=None TEST=Build and booted glados. Used monotonic timers in romstage in subsequent patches. Change-Id: I8294c74abe09947fb4438bf5c1d0fc5265491694 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6d60ef204fc92c26748ab57d4ff37830cd8dc664 Original-Change-Id: Ibdb6b9e20b9f2d48ff0f8a8c782f5c1f7ddde4f7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/295237 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11540 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/skylake: Implemented generic SPI driver for ROM/RAMSTAGE access.Subrata
Created generic library to implement SPI read, write, erase and read status functionality for both ROMSTAGE and RAMSTAGE access. BRANCH=NONE BUG=chrome-os-partner:42115 TEST=Built for sklrvp and kunimitsu and verify SPI read, write, erase success from ELOG. Change-Id: Idf4ffdb550e2a3b87059554e8825a1182b448a8a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 74907352931db78802298fe7280a39913a37f0c2 Original-Change-Id: Ib08da1b8825e2e88641acbac3863b926ec48afd9 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/294444 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Subrata Banik <subrata.banik@intel.com> Original-Commit-Queue: Subrata Banik <subrata.banik@intel.com> Reviewed-on: http://review.coreboot.org/11422 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-28soc/*/Makefile.inc: Do not add soc/common as a subdirAlexandru Gagniuc
Aaron Durbin found that soc/common is already included as a subdir via the wildcard in Makefile.inc: subdirs-y += $(wildcard src/soc/*/*) Since the entire file is protected by CONFIG_SOC_INTEL_COMMON, there is no problem with including it for every platform. On the other hand, when it is included by the skylake and braswell makefiles, any rule is duplicated. As a result fix the braswell and skylake makefiles. Change-Id: If5bad903c78dbce418852935ee55cdc7162b3b2d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11439 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-08-13skylake: fix serial port with new code baseAaron Durbin
Many Kconfig options changed in coreboot.org since skylake was first started. Fix Kconfig option name changes, and also provide a common option, UART_DEBUG that can be selected to select all the necessary options. Note: It's still a requirement to manually unset the 8250IO option because that's unconditionally set. BUG=chrome-os-partner:43419 BUG=chrome-os-partner:43463 BRANCH=None TEST=Built glados. Booted into kernel. Kernel reboots somewhere. Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289951 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11172 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 19:48:13 +0000