Age | Commit message (Collapse) | Author |
|
FSP 1.8.0 will do nothing with the VR settings if VrConfigEnable is
non-zero. That behavior is not desired because it's not clear what
the behavior will be for various processor SKUs. Instead provide
default values for the VR config. Note that PSI3 and PSI4 are not
enabled for those defaults.
BUG=chrome-os-partner:48466
BRANCH=None
TEST=Built and booted glados.
Change-Id: I02cb5fbdd4549cc827a0b0e4006bc21da4593b55
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a68c53e0fdf15584270dfafc679a22319f497d17
Original-Change-Id: I82b1d1da2cfa3c83ccc6a981e30ffac6fb6c8c4b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/318263
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12983
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CB used to clear recovery status towards romstage end after FSP
memory init. Later inside FSP silicon init due to HSIO CRC mismatch
it will request for an additional reset.On next boot system resume
in dev mode rather than recovery because lost its original state
due to FSP silicon init reset.
Hence an additional 1 reset require to identify original state.
With this patch, we will get future platform reset info during romstage
and restore back recovery request flag so, in next boot CB can maintain
its original status and avoid 1 extra reboot.
BUG=chrome-os-partner:43517
BRANCH=none
TEST= build and booted Kunimitsu and tested RO mode
Change-Id: Ibf86ff2b140cd9ad259eb39987d78177535cd975
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 40ddc21a97b318510116b7d5c4314380778a40f7
Original-Change-Id: Ia52835f87ef580317e91931aee5dd0119dea8111
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302257
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12975
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The use of a NHLT table is required to make audio work
on the skylake SoCs employing the internal DSP. The table
describes the audo endpoints (render vs capture) along with
their supported formats. These formats are not only dependent
on the audio peripheral but also hardware interfaces. As such
each format has an associated blob of DSP settings to make
the peripheral work. Lastly, each of these settings are provided
by Intel and need to be generated for each device's hardware
connection plus mode/format it supports. This patch does not
include the dsp setting blobs.
The current supported connections:
- digital mic array 2 channel
- digital mic array 4 channel
- Maxim 98357 amplifier
- ADI ssm4567
- NAU88L25 headset codec
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Built glados. Speakers, headphones, and mic on camera decently
worked.
CQ-DEPEND=CL:*239598
Change-Id: If1a9be97573b9b160893944661790cac7df26fca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f5514e27811c500732de97e1cc7edeced2607e7
Original-Change-Id: Ib42e895f00e7605cb30ce24d9b8dd00bf68a7477
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313998
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12938
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On Skylake systems, the bootblock fails to compile with the following
error message:
bootblock_simple.c:6.1:
0x13930e0 copy Internal compiler error: non dominated rhs use point
0x13a3f70?
Aborted (core dumped)
The option -fno-simplify-phi works around the issue, but will cause the
code to use more registers, hence we also need to enable -mcpu=p4 (see
intel/truxton mainboard for another example of where this has been done
in the past)
Change-Id: Iea1a1ba18d76c7323bb626c5f4b0032e4ee04a86
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12719
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Imported from cros repo 18ae19c
Change-Id: Ib88ac9b37d2f86d323b9a04cb17a5a490c61ff5b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12467
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Tested-by: build bot (Jenkins)
|
|
The right files just need to be added to the verstage
build. Do that so a stand alone verstage builds and
links.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11827
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Using a copiler to compile something that's already a binary is pretty
stupid. Now that Stefan converted most microcode in blobs to a plain
binary, use the binary version.
Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11607
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use the common ME and descriptor code.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados
Change-Id: I7196f587b92fd26129b30e2cd73f4caf5f4ebef8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11735
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
FSP has some unique attributes which makes integration
cumbersome:
1. FSP header files do not include the types they need. Like
EDKII development it's expected types are provided by the
build system. Therefore, one needs to include the proper
files to avoid compilation issues.
2. An implementation of FSP for a chipset may use different
versions of the UEFI PI spec implementation. EDKII is a
proxy for all of UEFI specifications. In order to provide
flexibility one needs to binding a set of types and
structures from an UEFI PI implementation.
3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h
file which defines it's own types. Commonality between
FSP chipset implementations are only named typedef
structs. The fields within are not consistent. And
because of FSP's insistence on typedefs it makes it
near impossible to forward declare structs.
The above 3 means one needs to include the correct UEFI
type bindings when working with FSP. The current
implementation had the SoC picking include paths in the
edk2 directory and using a bare <uefi_types.h> include.
Also, with the prior fsp_util.h implementation the SoC's
FSP FspUpdVpd.h header file was required since for providing
all the types at once (Generic FSP 1.1 and SoC types).
The binding has been changed in the following manner:
1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1
selects. No other bindings are currently available,
but this provides the policy.
2. Based on CONFIG_UEFI_2_4_BINDING the proper include
paths are added to the CPPFLAGS_common.
3. SoC Makefile.inc does not bind UEFI types nor does
it adjust CPPFLAGS_common in any way.
4. Provide a include/fsp directory under fsp1_1 and
expose src/drivers/intel/fsp1_1/include in the
include path. This split can allow a version 2,
for example, FSP to provide its own include files.
Yes, that means there needs to be consistency in
APIs, however that's not this patch.
5. Provide a way for code to differentiate the FSP spec
types (fsp/api.h) from the chipset FSP types
(fsp/soc_binding.h). This allows for code re-use that
doesn't need the chipset types to be defined such as
the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Change-Id: I894165942cfe36936e186af5221efa810be8bb29
Reviewed-on: http://review.coreboot.org/11606
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
|
|
The build system was previously determining the flow
and linking scripts bootblock code by the order of files
added to the bootblock_inc bootblock-y variables.Those
files were then concatenated together and built by a myriad of
make rules.
Now bootblock.S and bootblock.ld is added so that bootblock
can be built and linked using the default build rules.
CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the
chipset code to place include files in the path of the bootblock
program -- a replacement for the chipset_bootblock_inc
make variable.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built vortex, rambi, and some asus boards.
Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11495
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The timer_monotonic_get() function wasn't being compiled for
romstage. To simplify the implementation don't keep track of
partial microsecond ticks and just return the MSR value divided
by 24 (24MHz clock).
BUG=chrome-os-partner:42115
BRANCH=None
TEST=Build and booted glados. Used monotonic timers in romstage
in subsequent patches.
Change-Id: I8294c74abe09947fb4438bf5c1d0fc5265491694
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d60ef204fc92c26748ab57d4ff37830cd8dc664
Original-Change-Id: Ibdb6b9e20b9f2d48ff0f8a8c782f5c1f7ddde4f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295237
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11540
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Created generic library to implement SPI read, write, erase and
read status functionality for both ROMSTAGE and RAMSTAGE access.
BRANCH=NONE
BUG=chrome-os-partner:42115
TEST=Built for sklrvp and kunimitsu and verify SPI read, write,
erase success from ELOG.
Change-Id: Idf4ffdb550e2a3b87059554e8825a1182b448a8a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 74907352931db78802298fe7280a39913a37f0c2
Original-Change-Id: Ib08da1b8825e2e88641acbac3863b926ec48afd9
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294444
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Commit-Queue: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: http://review.coreboot.org/11422
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Aaron Durbin found that soc/common is already included as a subdir via
the wildcard in Makefile.inc:
subdirs-y += $(wildcard src/soc/*/*)
Since the entire file is protected by CONFIG_SOC_INTEL_COMMON, there
is no problem with including it for every platform. On the other hand,
when it is included by the skylake and braswell makefiles, any rule is
duplicated. As a result fix the braswell and skylake makefiles.
Change-Id: If5bad903c78dbce418852935ee55cdc7162b3b2d
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11439
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Many Kconfig options changed in coreboot.org since
skylake was first started. Fix Kconfig option name
changes, and also provide a common option, UART_DEBUG
that can be selected to select all the necessary
options.
Note: It's still a requirement to manually unset the
8250IO option because that's unconditionally set.
BUG=chrome-os-partner:43419
BUG=chrome-os-partner:43463
BRANCH=None
TEST=Built glados. Booted into kernel. Kernel reboots somewhere.
Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289951
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11172
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the files to support the Skylake SOC.
Matches chromium tree at 927026db
BRANCH=none
BUG=None
TEST=Build and run on a Skylake platform
Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the Broadwell implementation as the comparison base for Skylake.
BRANCH=none
BUG=None
TEST=None
Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10340
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|