summaryrefslogtreecommitdiff
path: root/src/soc/intel/quark/Makefile.inc
AgeCommit message (Collapse)Author
2017-06-20soc/intel/quark: Add legacy SPI flash controller driverLee Leahy
Add SPI driver code for the legacy SPI flash controller. Enable erase and write support allowing coreboot to save non-volatile data into the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-08soc/intel/quark: Add SD/MMC test supportLee Leahy
The SD/MMC test support consists of: * Add Kconfig value to enable the SD/MMC test support. * Add Kconfig value to enable the logging support. * Add SD/MMC controller init code and read block 0 from each partition. * Add logging code to snapshot the transactions with the SD/MMC device. * Add eMMC driver for ramstage to call test code. * Add romstage code to call test code. * Add bootblock code to call test code. TEST=Build and run on Galileo Gen2 Change-Id: I72785f0dcd466c05c1385cef166731219b583551 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/quark: Add the verstage filesLee Leahy
Add the files to support verstage for vboot. TEST=Build and run on Galileo Gen2 Change-Id: Icf87075012c08cf581c17d579e0763888c707265 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18040 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 romstage supportLee Leahy
Add the pieces necessary to successfully build and run romstage using the FSP 2.0 build. Because romstage is using postcar, add the postcar pieces so that romstage can attempt to load postcar. TEST=Build and run on Galileo Gen2 Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15866 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 boot block supportLee Leahy
Add the pieces necessary to successfully build and run bootblock using the FSP 2.0 build. TEST=Build and run bootblock on Galileo Gen2 Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03soc/intel/quark: Prepare for FSP2.0 supportLee Leahy
Split the original contents of romstage.c into car.c, romstage.c and fsp1_1.c. TEST=Build and run on Galileo Gen2 Change-Id: I6392d7382e383ea2087afa6bf45b1f087ba78d79 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08soc/intel/quark: Remove use of PDAT.bin fileLee Leahy
Remove the unused Kconfig values which specify the PDAT file, its location and inclusion into the coreboot file system. Remove the code in romstage which locates the pdat.bin file. TEST=Build and run on Galileo Gen2 Change-Id: I397aa22ada6c073c60485a735d6e2cb42bfd40ab Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15205 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-12soc/intel/quark: Add C bootblockLee Leahy
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected. This is the first piece in supporting FSP 2.0. Move esraminit from romstage into the bootblock. Replace cache_as_ram with car_stage_entry.S and code in romstage.c TEST=Build and run on Galileo Gen2 Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15132 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31soc/intel/quark: Split I2C out from driverLee Leahy
Split out the I2C code to allow I2C transactions during early romstage. TEST=Build and run on Galileo Gen2 Change-Id: I87ceb0a8cf660e4337738b3bcde9d4fdeae0159d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Rename pmc.c to lpc.cLee Leahy
Rename the file pmc.c to lpc.c to prepare for further additions. TEST=Build and run on Galileo Gen2 Change-Id: If98825d72878f0601f77bff8c766276dbda8a9ae Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14946 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-23soc/intel/quark: Rename usb.c to ehci.cLee Leahy
Rename usb.c to ehci.c since it contains EHCI specific content. TEST=Build and run on Galileo Gen2 Change-Id: Ifdb7cd937b1dffda1959b76e1c911ffd93f53cb6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14939 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-18soc/intel/quark: Add I2C supportLee Leahy
Add the I2C driver. TEST=Build and run on Galileo Gen2 Change-Id: I53fdac93667a8ffb2c2c8f394334de2dece63d66 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14828 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/intel/quark: Add USB PHY initializationLee Leahy
Add register access support using register scripts. Initialize the USB PHY using register scripts. TEST=Build and run on Galileo Gen2 Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-29soc/intel/quark: Initialize some of the FADT base registersLee Leahy
Initialize the base addresses for: * Power management control * Power management status * Reset * Power management timer * General-Purpose Event 0 Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when: * Register address are properly displayed by the payload * "reset -c" performs a reset and reboots the system * "reset -w" performs a reset and reboots the system * "reset -s" performs a reset and turns off the power Change-Id: I9d043f4906a067b2477650140210cfae4a7f8b79 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13764 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22soc/intel/quark: Add the initial pieces required for ACPI tablesLee Leahy
Enable ACPI tables TEST=None Change-Id: I38b90f54cd9b00b063557c08980e71851bf3059b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13758 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
Enable HSUART1 for debug serial output. Specify the fixed resources in the UART driver. This keeps debug serial output flowing during the rest of the device initialization. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13730 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Establish the Memory MapLee Leahy
Add ramstage.h to define some of the common header files used by the drivers in ramstage. Add northcluster.c, the driver for the memory controller, which defines the memory map. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Memory map successfully displayed in BS_WRITE_TABLES state Change-Id: I8dc91119eaad0b7abc2e484d13ee708ba1253438 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
Optionally relocate FSP into DRAM and then call FSP SiliconInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_FSP_ENTRY_POINTS" * Add "select DISPLAY_HOBS" * Optionally add "select RELOCATE_FSP_INTO_DRAM" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * FSP entry points are displayed and * The message "FspSiliconInit returned 0x00000000" is displayed and * The HOBs are displayed correctly and * The message "ERROR - Missing one or more required FSP HOBs!" is not displayed Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13631 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04soc/intel/quark: Add minimal Quark SoC X1000 filesLee Leahy
Add the files for minimal Quark X1000 SoC support: * Declare pei_data structure * Declare sleep states and chipset_power_state structure * Specify top of memory * Empty FspUpdVpd.h file TEST=None Change-Id: If741f84904394780e1f29bd6ddbd81514c3e21c9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>