summaryrefslogtreecommitdiff
path: root/src/soc/intel/jasperlake
AgeCommit message (Collapse)Author
2020-10-12soc/intel/jasperlake: Allow mainboard to override chip configurationKarthikeyan Ramasubramanian
Add a weak override function to allow mainboard to override chip configuration like GPIO PM. BUG=None TEST=Build and boot waddledee to OS. Ensure that the suspend/resume sequence works fine. Change-Id: I40fa655b0324dc444182b988f0089587e3877a47 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12soc/intel/jasperlake: Correct SaGv mappingAamir Bohra
Jasper Lake support 3 Memory train frequencies low. mid and high. Update the SaGv configuration accordingly. Change-Id: I366de1ea7cf41c56b2954b8032c69bfba81058e2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
2020-10-12soc/intel/jasperlake: Remove GPIO community 2 from DSDTEvan Green
The kernel driver enumerates communities 0, 1, 4, and 5, and assigns these addresses based on the BARs enumerated by coreboot. Coreboot was defining communities 0, 1, 2, 4, and 5. This meant the kernel was not controlling GPIOs in communities 4 and 5, since the resources were wrong. Remove community 2 for now. We can add it back if the kernel ends up needing it. BUG=b:169444894 TEST=Test controlling GPP_E5, verify actually toggles register. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I823e1aa942cfccadde01b9371d481457ab088c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46115 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/intel/jasperlake: Add VR Configuration settingsMeera Ravindranath
This CL fixes the CPU Throttling issue. BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3fa32218040263f0abef8b9dd4c52efb31289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-08Revert "soc/intel/jasperlake: Disable PAVP UPD"Nico Huber
This reverts commit 69589294c205b616e80cafbbfb0b33e105a75386. No reason was given why this should deviate from the other platforms and the author can't explain it. Change-Id: I2e8d6f9bd4ebba69b6f7cdd9a1c5d08aaf2e798f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08soc/intel: Make use of common gfx.aslSubrata Banik
Add gfx.asl file for all IA SOCs to allow for graphics-related ACPI devices and methods. TEST=Able to build and boot TGL platform Dump and disassemble DSDT, verify GFX0 device present as below Device (GFX0) { Name (_ADR, 0x00020000) // _ADR: Address } Change-Id: I5560e900a77872552df1064dc3b7a8148e35d682 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-06templates: add an empty SPD to SPD_SOURCESPaul Fagerburg
Add an empty SPD in SPD_SOURCES when creating a new variant of hatch, volteer, waddledee, or waddledoo, so that coreboot can build successfully. For variants that use spd_tools, add an empty mem_parts_used.txt so that the developer can add the supported memory parts and regenerate the Makefile.inc with the correct SPD references. Add an empty SPD for LPDDR4x for waddledee and waddledoo to use. BUG=b:169422833 TEST=create a new variant of hatch, volteer, waddledee, and waddledoo. Observe that each one succeeds. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I06dfb6103701bf8949180595f1e98fac48bcc585 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-05soc/intel: remove duplicate weak versions of mainboard_get_dram_part_num()Nick Vaccaro
Consolidate all weak declarations of mainboard_get_dram_part_num() to instead use the common definition in lib/spd_bin.c. BUG=b:168724473 TEST="emerge-volteer coreboot && emerge-nocturne coreboot && emerge-dedede coreboot" and verify build succeeds without error. Change-Id: I322899c080ab7ebcf1cdcad3ce3dfa1d022864d1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05soc: move mainboard_get_dram_part_num prototype to memory_info.hNick Vaccaro
BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-nocturne coreboot && emerge-dedede coreboot" and verify they build successfully. Change-Id: I8b228475621ca1035fe13f8311355fc3b926e897 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05mb, soc: change mainboard_get_dram_part_num() prototypeNick Vaccaro
Change mainboard_get_dram_part_num() to return a constant character pointer to a null-terminated C string and to take no input parameters. This also addresses the issue that different SOCs and motherboards were using different definitions for mainboard_get_dram_part_num by consolidating to a single definition. BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch coreboot" and verify build completes successfully. Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common ish.aslSubrata Banik
This patch moves ish.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CML platform. 1) Dump and disassemble DSDT, verify ISHB device present inside common ish.asl is still there with correct _ADR value. 2) Verify no ACPI error seen while running 'dmesg` from console. CML platform: Device (ISHB) { Name (_ADR, 0x00130000) // _ADR: Address Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name } TGL/JSL platform: Device (ISHB) { Name (_ADR, 0x00120000) // _ADR: Address Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name } Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I33c1649d7a632c7b147e1bf307cfb5c1dfd84c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/common/block/acpi: Factor out common smbus.aslSubrata Banik
This patch moves smbus.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify SBUS device present inside common smbus.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ib1ae48f7ece3e521501d92c40cd551287ea2f1ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/45979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/jasperlake: Delete unused ipu.aslSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I8c7363d442ed40c36fc01dc3608bab864865f29d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45977 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common pch_glan.aslSubrata Banik
This patch moves pch_glan.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify GLAN device present inside common pch_glan.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I479678c864eba39e5ab04f658600e8cba48198ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/45975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Make use of PMC low power program from common blockSubrata Banik
List of changes: 1. Select PMC_LOW_POWER_MODE_PROGRAM from applicable SoC directory 2. Remove redundant PMC programming from SoC and refer to common code block 3. Remove unused 'reg8' and 'reg32' variable as applicable from SoC function. Change-Id: I18894c49cfc6e88675b5fb71bca0412e5639fb4b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45796 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-03soc/intel: Move pch_misc_init() to common codeSubrata Banik
List of changes: 1. Move pch_misc_init() into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. 3. Create macros for IO port 0x61 and 0x70 as applicable. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: Ie36ee63869c076d251ccfa5409001d18f22600d7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Move soc_pch_pirq_init() to common codeSubrata Banik
List of changes: 1. Rename soc_pch_pirq_init() as pch_pirq_init() and move into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: I856b5ca024e58fd14b4d1721f23d9516a283ebf8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Move pch_enable_ioapic() to common codeSubrata Banik
List of changes: 1. Move pch_enable_ioapic() into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: I2a6afc1da50c8ee5bccda7f5671b516dc31fe023 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-02drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES configShelley Chen
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't allow writing to SPI flash when early stages are running XIP from flash. If BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected, BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms that write to flash in the earlier stages, assuming that they have that capability. BUG=b:150502246 BRANCH=None TEST=diff the coreboot.rom files resulting from running ./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless with and without this change to make sure that there was no difference. Also did this for GOOGLE_CANDY board, which is baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES enabled). Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-29soc/intel/jasperlake: Add IGD, MCH Device IDKrishna Prasad Bhat
Add IGD Device ID and MCH Device ID for Jasperlake. Reference is taken from Jasperlake EDS volume 1(Document Number: 613601). TEST=Build and boot Jasperlake platform. Change-Id: I00ee7950ffa378b428a76bf367a9a05ab287e7ed Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-28soc/intel/common/block/lpc: add acpi nameJonathan Zhang
Add ACPI name for LPC device. The name matches with what is in soc/intel/common/block/acpi/acpi/lpc.asl. Since several Intel SOCs select CONFIG_SOC_INTEL_COMMON_BLOCK_LPC, remove duplicated acpi name assignments. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: If418c83caafe5d9e2af135a8946cbe5eb687b9ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/45590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-27soc/intel/common/block/acpi: Factor out common gpio_op.aslSubrata Banik
This patch moves gpio_op.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify all methods present inside common gpio_op.asl like GRXS, GTXS etc. are still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I248f5e66994d2f3d6b0bd398347e7cf9ae7f2cc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-27soc/intel/{jsl,tgl}: Fix GRXS function to get GPIO number properSubrata Banik
This patch ensures that GRXS perform PAD_CFG0_RX_STATE mask first and then right shift PAD_CFG0_RX_STATE_BIT to get correct GPIO number. Change-Id: I96611936f70f79e9dc5ee9414ec68cef00d0d13a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45738 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-26arch/x86: Introduce `ARCH_ALL_STAGES_X86_32`Angel Pons
Nearly every x86 platform uses the same arch for all stages. The only exception is Picasso. So, factor out redundant symbols from the rest. Alder Lake is not yet complete, so it has been skipped for now. Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-25soc/intel/{jsl,tgl}: Refactor gpio_op.aslSubrata Banik
Also align GPMO ASL function with TGL. Change-Id: Ia40af2cba9867838a1f99141481a5e78cffa0111 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-22soc/intel/jasperlake: Enable processor thermal control using PCI_DEVFNSumeet R Pawnikar
Enable processor thermal control using PCI dev path function instead of Device4Enable parameter in devicetree. This change removes the dependency on Device4Enable in devicetree. We can enable and disable this thermal control using on and off support with PCI device entry in devicetree. BRANCH=None BUG=None TEST=Built and tested on dedede board Change-Id: I0463236996ad001af506c9966840b27fe44d60d2 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-22Revert "soc/intel: Refactor do_global_reset() function"Furquan Shaikh
This reverts commit 77cc3267fc970c710299a164ecbc471f9287d719. Reason for revert: Breaks quark and also needs breaking down into multiple CLs as commented by Nico on CB:45541 Change-Id: Idf4ca74158df15483856754ee24cc4472a8e09b0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-21src/soc/intel: Drop unneeded empty linesElyes HAOUAS
Change-Id: Id93aab5630e928ee4d7e957801e15a4cc8739fae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44594 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/intel: Refactor do_global_reset() functionSubrata Banik
List of changes: 1. Rename do_global_reset() to force_global_reset() 2. Make force_global_reset() function static 3. Implement force_global_reset() into common/reset.c to avoid dedicated SoC implementation 4. Remove redundant force_global_reset() implementation from dedicated SoC 5. Make direct call to global_reset() from cse_lite.c 7. Drop CONFIG_HAVE_CF9_RESET_PREPARE Kconfig from APL SoC due to common reset (soc/intel/common/reset.c) code migration 8. Remove unused function send_global_reset() from SKL me.c due to common reset code migration 9. Delete heci.c from APL SoC as unused Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I1c5dc8d5606ef28ffaed4a64d90f470ae1ffc2a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21soc/intel/jsl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19soc/intel/common/block/cse: Refactor cse_request_global_reset() functionSubrata Banik
List of changes: 1. Check if CSE is enabled from devicetree.cb 2. Create helper function cse_request_reset() 3. Modify caller function argument cse_request_global_reset() Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14soc/intel/{cnl,icl,jsl,tgl}: Clean up chip.hSubrata Banik
Removed unused header files in chip.h Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Idb9b1ed23df3dbb9dad4d36651064c21a4d913fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/jasperlake: Clean up iomap.h and systemagent.hSubrata Banik
List of changes: 1. Convert inconsistent white space into tab. 2. Group together all MCHBAR offset macros. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ief13406b0116ce0f0b7472e5b133b3fac06f6e27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-06soc/intel: skl,cnl,icl,jsl,tgl: disable usb over-current pin by defaultMichael Niewöhner
Fsp configures the USB over-current pin and overrides the according pad configuration to NF1, regardless of the port being configured as disabled. Thus, set the OC pin to 0xff ("disabled") in this case to prevent this. This allows us to skip setting USBx_PORT_EMPTY in the devicetree for disabled USB ports. Change-Id: Ib8ea2ea26c0623d4db910e487b37255e907b299d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45112 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04soc/intel/{jasperlake,tigerlake}/Kconfig: Drop redundant 'select ↵Elyes HAOUAS
CPU_INTEL_COMMON_SMM' CPU_INTEL_COMMON_SMM is set to yes if CPU_INTEL_COMMON at cpu/intel/common/Kconfig. Change-Id: I7c8e1bb6b7c3199a24711b64a6cbba4de190c6d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex). BUG=b:160157545 TEST=run gen_part_id for volteer variants and verify that it changed spd names to prepend the "lp4x-" to the filename.. Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28util: volteer/dedede: move generic SPDs to common locationNick Vaccaro
Now that generic SPD files have the memory type prepended to the filename, they can be stored in the same location. This CL moves the generic SPDs to the new location. Change the ddr4 gen_part_id.go and gen_spd.go tools to use "ddr4_spd_manifest.generated" instead of "spd_manifest.generated". Change the lpddr4x gen_part_id.go and gen_spd.go tools to use "lp4x_spd_manifest.generated" instead of "spd_manifest.generated". Move TGL DDR4 and LPDDR4x generic SPDs into a common location. Move JSL DDR4 and LPDDR4x generic SPDs into a common location. Change the volteer/spd/Makefile.inc to use the new path for the spds. Change the dedede/spd/Makefile.inc to use the new path for the spds. BUG=b:165854055 TEST="emerge-volteer coreboot" and verify all variants build correctly. Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-25soc/intel/jasperlake: Disable multiphase SI initRonak Kanabar
Jasper Lake does not have any use case for multiphase SI init so Disable it. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: I2d591b46c403e68ff0b41ac8f87c742ae774111e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-25soc/intel/jasperlake: Select PLATFORM_USES_FSP2_2Ronak Kanabar
Add support for FSP 2.2 for jasperlake by selecting PLATFORM_USES_FSP2_2 config. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: Ia606ec26da93242ecdd602a9b3badbece5dcd034 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/intel/jasperlake: Run pmc_set_acpi_mode() during .init in pmc_opsKane Chen
pmc_set_acpi_mode will set EC SMI mask to 1 in the end. However google_chromeec_events_init will clear EC SMI mask. If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask will be 0 in depthcharge and causes lidclose function not working. So, pmc_set_acpi_mode() should run after google_chromeec_events_init. This code is mainly from CB:42677 BUG=b:16338215 TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo. Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/intel/jasperlake: use UDK_202005_BINDINGRonak Kanabar
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init support through the FSP-S arch UPD. The FSP-S arch UPD structure is added in edk2 stable 2020 branch. Switching the support for JSL to edk2-stable202005 to intercept the FSP2.2 related support. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: rename ELOG_WAKE_SOURCE_GPIO to ELOG_WAKE_SOURCE_GPEAaron Durbin
The wake source macro for GPE events was using 'GPIO'. However, current usage is really all GPEs. Therefore, provide clarity in the naming in order to allow for proper GPIO wake events that are separate from the ACPI GPE block. BUG=b:159947207 Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18soc/intel/jasperlake: Fix PMC_GPE_DW mappingMeera Ravindranath
PMC_GPE_DW mapping was not configured correctly and hence coreboot skipped programming Tier 1 GPIOs resulting in failure of S3 wake from Trackpad. TEST=System should wake from S3 via trackpad Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-18soc/intel/jasperlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBMeera Ravindranath
Increase the cbmem console size from 3KB to 5KB in order to fix console overflow. Change-Id: Id7eb64feb91ec29df5402b2fb1bac3ff73cc5bb3 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44326 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18soc/intel/jasperlake: Configure IPU based on devicetreeMaulik V Vaghela
FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. BUG=None BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-17soc/intel/jasperlake: Add IGD Device IDKrishna Prasad Bhat
Add IGD Device ID for Jasperlake. Reference is taken from Jasperlake EDS volume 1(Document Number: 613601). TEST=Build and boot Jasperlake platform. Change-Id: Iab3ba286f36afbf9533ac3cc62891fa390ca2441 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44000 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/intel/jasperlake: Add FSP UPDs for minimum assertion widthsV Sowmya
Add the FSP UPDs for the chipset minimum assertion widths and Power cycle duration to the chip options which can be configured per mainboard. * PchPmSlpS3MinAssert: SLP_S3 Minimum Assertion Width Policy * PchPmSlpS4MinAssert: SLP_S4 Minimum Assertion Width Policy * PchPmSlpSusMinAssert: SLP_SUS Minimum Assertion Width Policy * PchPmSlpAMinAssert: SLP_A Minimum Assertion Width Policy * PchPmPwrCycDur: PCH PM Reset Power Cycle Duration * Check to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. BUG=b:159104150 Change-Id: I042e8e34b7dfda3bc21e5f2e6727cb7692ffc7f7 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-09soc/intel/{icl.tgl,jsl}: Remove SMRAM register programmingAamir Bohra
SA SMRAMC register PCI offset 0x88 is deprecated for ICL, JSL and TGL. Removing the register programming for these platforms. The write to this register does not take effect and remains configured to 0, even when programmed. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I3f581b90ea99012980f439a7914e8d901585b004 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-07soc/intel/{cnl,icl,jsl,tgl}: Use Bus Master for setting up PWRMBASESubrata Banik
In 'bootblock/pch.c', clear PCI_COMMAND_MASTER (BIT 2) prior to programming PWRMBASE and enable BIT 2 after programming PWRMBASE along with PCI_COMMAND_MEMORY (BIT 1). Also perform below operations 1. Use pci_and_config16 instead of pci read and write 2. Use setbits32 instead of mmio read and write Change-Id: I7a148c718d7d2b618ad6e33d6cec11bd0bce0937 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-05{nb,soc}/intel: Use get_current_microcode_rev() for ucode versionSubrata Banik
This patch removes all redundant read microcode version implementation from SoC directory and refer from cpu/intel/microcode/microcode.c file. TEST=Able to get correct microcode version. Change-Id: Icb905b18d85f1c5b68fac6905f3c65e95bffa2da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44175 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-03src/soc/intel/jasperlake: Update SD card ACPI deviceAamir Bohra
1. Add _DSM method 2. Add support to turn on/off the power enable signal in _PS0/_PS3 methods. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I4f944caa535bdc946eef1e0f518fe3ee344187b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-08-01soc/intel/{icl,jsl,tgl}: Remove SkipMpInit UPD as deprecatedSubrata Banik
FSP default UPD for SkipMpInit is set to 0 which refers to run CPU feature programming on all cores (BSP + APs). Setting SkipMpInit=1 is not recommended as it will only limit CPU feature programming on BSP. TEST=Able to perform CPU feature programming by FSP on all cores using external MP PPI services. Change-Id: I22e70f5f15e53c5fabd78cc3698c4d718b607af6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-29soc/intel/jasperlake: Clean up report_cpu_info() functionUsha P
This patch uses the fill_processor_name function in order to fetch the CPU Name. TEST = Successfully able to build boot Waddledoo and verify the cpu_name from CPU log "CPU: Genuine Intel(R) CPU 0000 @ 1.10GHz". Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I532e05d9bb71fdff24e086e81ec72ffe8dc2c22d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43480 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/intel/jasperlake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: I744939bee3d51ac25c1cc2dcd3359fe571c9e408 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43898 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27soc/intel/jasperlake: Invoke PCIe root port swappingKarthikeyan Ramasubramanian
Invoke PCIe root port devicetree update to swap the enabled root port devices with the disabled devices. BUG=b:162046161 TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is swapped with the PCIe device 1c.0 corresponding to Root port 1. Change-Id: I7d422014a2f5cafc41296ce0a2c116c82aefb0d7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43835 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/jasperlakelake: Rename pch_init() codeUsha P
Rename the pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot Waddledoo successfully. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Iaa0a41f3b5972251d6cd9359bbb46d392196b2e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Update bare access to BOOL CONFIG_ vals to CONFIG()Martin Roth
BOOL type Kconfig values should be used through the CONFIG() macro. These instances were not, so update them. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26cpu,soc/intel: Drop select SMPKyösti Mälkki
Implicitly selected with MAX_CPUS != 1. Change-Id: I4ac3e30e9f96cd52244b4bae73bafce0564d41e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove unused 'include <cbmem.h>'Elyes HAOUAS
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23soc/intel/jasperlake: Add the SkipCpuReplacementCheck configurationV Sowmya
Add SkipCpuReplacementCheck config to control the FSPM UPD used for skipping the CPU replacementment check to avoid the forced MRC training for the platforms with soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddleddo. Cq-Depend: chrome-internal:3142530 Change-Id: I63fcdab3686322406cf7c24fc26cbb535cc58c8d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-22soc/intel/jasperlake: Move tco_configure to bootblockTim Wawrzynczak
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same problem to come up on jasperlake. Again, it should be harmless to configure the TCO device earlier in the boot flow. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If95e46124660b4ed457434f727c9f9f7b02b0327 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43539 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21src: Use ACPI macrosElyes HAOUAS
Change-Id: I2cf11b784299708f02fd749dcb887b6d25f86f5b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07soc/intel/{tiger,jasper}lake: Add IPU to soc_acpi_nameTim Wawrzynczak
For both Tiger Lake and Jasper Lake, add the DEVFN for Image Processing Unit (IPU) to soc_acpi_name, which is set to return "IPU0". Change-Id: Ib11be5be7fbaec688d8788945a3bcab3f8d834a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42878 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06soc/intel: Drop unused `#include <reg_script.h>`Angel Pons
In some cases, the SoC did not even select `REG_SCRIPT` in Kconfig. Change-Id: I617f332b80c534997e06a91247d1be90a85573be Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-06soc/intel/jasperlake: set SerialIoUartDebugMode to skip Uart InitMaulik V Vaghela
Since coreboot is initializing uart for debug logs, fsp should not reinitialize it. Thus we need to set FSP UPD to skip Uart init in FSP and use settings done by coreboot BUG=None BRANCH=None TEST=FSP is able to push debug logs on UART with this setting Cq-Depend: TBD Change-Id: I0fda2ace3b1f63159e9809d6a3044a3bad452f07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-06-30jasperlake: enable tcc_offset functionalitySumeet R Pawnikar
This enables Thermal Control Circuit (TCC) activation feature to set tcc_offset value to new value in devicetree. BUG=None BRANCH=None TEST=Built for dedede platform and verified the MSR value Change-Id: I58e4fa362f20efeef84e06e64d70ee7c4f9554d6 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25drivers/intel/fsp2_0: decouple FSP_PEIM_TO_PEIM_INTERFACE from FSP 2.1Jonathan Zhang
Not all FSPs based on FSP 2.1 supports the feature of external PPI interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE. Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is selected. Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake). Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-22soc/intel/jasperlake: add processor power limits control supportSumeet R Pawnikar
Add processor power limits control support to configure values for jasperlake soc based platforms. BRANCH=None BUG=None TEST=Built for dedede system Change-Id: Ib5502b225c1158c1f0729ce799ed0b8101f0233f Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18soc/intel/jasperlake: Enable FSP-S compressionKarthikeyan Ramasubramanian
Use LZ4 compression technique to compress FSP-S. This provides some SPI ROM space savings(~60 KiB) in each CBFS. FSP-M is XIP and hence not compressed. LZ4 is chosen over LZMA since the decompression saves ~50 ms for an extra overhead of ~1.5 KiB. LZ4 Compression: fsps.bin 0xa9fc0 fsp 203423 LZ4 (262144 decompressed) LZ4 Decompression: 17:starting LZ4 decompress (ignore for x86) 433,550 (1,154) 18:finished LZ4 decompress (ignore for x86) 461,620 (28,069) LZMA Compression: fsps.bin 0xa9fc0 fsp 202132 LZMA (262144 decompressed) LZMA Decompression: 15:starting LZMA decompress (ignore for x86) 478,448 (1,174) 16:finished LZMA decompress (ignore for x86) 557,725 (79,277) BUG=b:158034451 TEST=Build and boot waddledoo mainboard. Change-Id: I416b1d91d7f4836b1e9c641b0fe07b39876364ba Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-16soc/intel/common: Replace smm_soutbridge_enable(SMI_FLAGS)Kyösti Mälkki
Change-Id: I8c4dc5ab91891de9737189bd7ae86df18d86f758 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16arch/x86: Create helper for APM_CNT SMI triggersKyösti Mälkki
Attempts to write to APM_CNT IO port should always be guarded with a test to verify SMI handler has been installed. Immediate followup removes redundant HAVE_SMI_HANDLER tests. Change-Id: If3fb0f1a8b32076f1d9f3fea9f817dd4b093ad98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41971 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10ACPI: Remove Kconfig COMMON_FADTKyösti Mälkki
Also remove default mb/*/fadt.c from Makefiles. Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-08spd/lp4x: Set manufacturer part name to blank (0x20)Furquan Shaikh
As per JEDEC spec, manufacturer part name should be set to blank (0x20). This change updates gen_spd.go to set bytes 329-348 as 0x20 and regenerates SPDs for TGL and JSL. Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07soc/intel/jasperlake: Add JSL PMC as 'hidden' PCI deviceTim Wawrzynczak
This change allows treating the PMC as a 'hidden' PCI device on Jasper Lake, so that the MMIO & I/O resources can be exposed as belonging to this device, instead of the system agent and LPC/eSPI. Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-06lp4x: Add new memory parts and generate SPDsFurquan Shaikh
This change adds the following memory parts to LP4x global list and generates SPDs using gen_spd.go for TGL and JSL: 1. MT53E512M32D2NP-046 WT:E 2. K4U6E3S4AA-MGCR 3. H9HCNNNCPMMLXR-NEE 4. K4UBE3D4AA-MGCR BUG=b:157862308, b:157732528 Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06soc/intel/jasperlake: Generate LP4x SPD files using gen_spd.goFurquan Shaikh
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to generate SPD files for currently known LP4x memory parts that can be used with JSL-based mainboards. Following files are added: 1. spd-*.hex: SPD files auto-generated by gen_spd.go 2. spd_manifest.generated.txt: Manifest file auto-generated by gen_spd.go Mainboards can use the SPD files from SoC directly when creating SPD binary to add to CBFS. Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03soc/intel/jasperlake: Update C-States infoRonak Kanabar
- Update C-States max latency values - Remove MSR programming for C-States latency BRANCH=None TEST=Boot to OS and check CState Latenecy >cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency} POLL C1_ACPI C2_ACPI C3_ACPI 0 1 253 1048 Change-Id: I05c0b5b31d1883f72ca94171aa1b536621e97449 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40902 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03soc/intel/jasperlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I78f091e0d3d17fcfc60cd54721b34d143cbe2d86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-02soc/intel/common/{pch,sata}: Remove SATA common code driverSubrata Banik
Right now all FSP2.0 based IA platform doesn't need this driver anymore hence removing to avoid debug and maintenance effort. TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms. Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02soc/intel/jasperlake: Update camera_clock_ctl.asl to ASL2.0 syntaxV Sowmya
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for wdoo. Change-Id: I76ec29210ecdde728ce55531d2b6657be87ce9da Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-02soc/intel/jasperlake: Update gpio_op.asl to ASL2.0 syntaxV Sowmya
This change updates gpio_op.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for wdoo. Change-Id: I3ec442ad85f408135642a112873231ce7d39524e Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-02soc/intel/jasperlake: Update pch_hda.asl to ASL2.0 syntaxV Sowmya
This change updates pch_hda.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for wdoo. Change-Id: I8e965560518decbfafabe9ac06066d28d59240d0 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-02soc/intel/jasperlake: Update scs.asl to ASL2.0 syntaxV Sowmya
This change updates scs.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for wdoo. Change-Id: Ic1b5f3395a1ea8a3dd2ac6b109f9a5abe65d137f Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-02soc/intel/jasperlake: Update platform.asl to ASL2.0 syntaxV Sowmya
This change updates platform.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for wdoo. Change-Id: Ie55bcd9ac2ca746c046ebe05140b2ac291fb0459 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-06-02{icelake,jasperlake,skylake,tigerlake}/bootblock.c: Clean up includesElyes HAOUAS
Drop unused includes and add missing <intelblocks/systemagent.h>. Change-Id: I06c8b2bf65283c3c1fcd25fdaae298b82fc0e09c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-02src: Remove unused '#include <cpu/x86/lapic.h>'Elyes HAOUAS
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'. Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/jasperlake: Disable PAVP UPDRonak Kanabar
This patch will disable PAVP UPD, which is by default enabled in FSP. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD values from FSP log Change-Id: I8e103ad11ae6ffa6b9efe4bf249bbe344bc10a30 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41763 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/jasperlake: Correct GPIO community PID configurationAamir Bohra
Current implementation returns the incorrect GPIO community PID. The GPIO community index 3 should return PID for COMM_4 and index 4 should return PID for COMM_5. TEST=Verify GPIO PM bits are correctly set through MS0x ACPI method. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I3da4945e93605a297baff076295433164fdf613d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41721 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28Remove new additions of "this file is part of" linesElyes HAOUAS
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-28soc/intel/jasperlake: Use coreboot lock down configAamir Bohra
Allow lockdown configuration from using CHIPSET_LOCKDOWN_COREBOOT config. TEST=Build and boot waddledoo board Change-Id: I3abaa737580ef45b98cabfa23edd84162037dd70 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41534 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27soc/intel/gma: Implement fsp_soc_get_igd_bar() in common codeNico Huber
`fsp/util.h` draws incompatible UDK headers in. Hence, we have to declare it locally again. Change-Id: Iaa5981088eeb5c36f765d6332ae47a38a6a4c875 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40729 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27soc/intel/gma: Move display and opregion init to common codeNico Huber
Change-Id: I359b529df44db7d63c5a7922cb1ebd8e130d0c43 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40725 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27drivers/intel/gma: Move IGD OpRegion to CBMEMNico Huber
It never was in GNVS, it never belonged among the ACPI tables. Having it in CBMEM, makes it easy to look the location up on resume, and saves us additional boilerplate. TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and intel_backlight + acpi_video synchronize, both before and after suspend. Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/jasperlake: correct IRQ routing Jasper LakeRonak Kanabar
Current Interrupt setting use 2nd parameters as device function number. Correct as interrupt pin number according to _PRT package format. {Address, pin, Source, Source index} Reference: - ACPI spec 6.2.13 _PRT BUG=None BRANCH=None TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI INTR(0x3C) register and no interrupt storm is seen Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-23soc/intel/{jsl,tgl}: Override PRERAM_CBMEM_CONSOLE_SIZE default valueSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. TEST=Verified on TGL platform. Change-Id: Iae66b6a1260a9290b35d804487b7a07242c5ebc2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-20soc/intel/jasperlake: Add ACPI method to get GPIO PCR PIDAamir Bohra
Add method acpi method GPID to return the GPIO PCR port ID. This method is further planned to be used for GPIO power management configuration. TEST=Build waddledoo board Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18soc/intel/jasperlake: Add function to display ME firmware status infoKrishna Prasad Bhat
Add function to display ME Host Firmware Status registers. Make use of print_me_fw_version() from CSE lib to print ME firmware version information. Add manufacturing mode field in HFSTS1 register for JSL in place of, spi_protection_mode in TGL. BUG=None BRANCH=None TEST=Build and boot jslrvp. In coreboot logs, ME info can be seen. ME: Version: 13.5.0.7049 ME: HFSTS1 : 0x90006255 ME: HFSTS2 : 0x82100136 ME: HFSTS3 : 0x00000020 ME: HFSTS4 : 0x00004800 ME: HFSTS5 : 0x00000000 ME: HFSTS6 : 0x00400006 ME: Manufacturing Mode : YES ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: D0i3 Support : YES ME: Low Power State Enabled : NO ME: CPU Replaced : YES ME: CPU Replacement Valid : YES ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 6 ME: CPU Debug Disabled : YES ME: TXT Support : NO Change-Id: Ic6b1c9410db8f06ac24fd997772b2ede04264bee Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 00:15:12 +0000