summaryrefslogtreecommitdiff
path: root/src/soc/intel/jasperlake
AgeCommit message (Collapse)Author
2021-01-31soc/intel/*: drop incomplete and unneeded check for DMI SRLOCKMichael Niewöhner
Before enabling IO decode ranges, current code checks if the DMI SRLOCK is set to prevent inconsistencies between LPC PCI cfg registers and LPC DMI registers, when the latter are locked. DMI SRLOCK only applies to PCHs with on-package DMI, but not to PCH-H, PCH-S and others with discrete PCH packages. So this check is at least incomplete. Further, the lock gets applied by FSP and gets reset on a warm reset. Thus, there is no case where the lock would be already set at the places where the DMI registers get written currently. Drop the checks for the reasons mentioned above. Change-Id: I59554ce96bce7f7d1a4ba9b098be9e8466c68eac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49885 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-30soc/intel: Replace `SA_PCIEX_LENGTH` Kconfig optionsAngel Pons
Use the existing `MMCONF_BUS_NUMBER` and `MMCONF_LENGTH` symbols. Change-Id: I88dcc0d5845198f668c6604c45fd869617168231 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-29device/Kconfig: Declare MMCONF symbols' type onceAngel Pons
Only specify the type of MMCONF_BASE_ADDRESS and MMCONF_BUS_NUMBER once. Change-Id: Iacd2ed0dae5f1fb6b309124da53b3fa0eef32693 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-28arch/x86: Remove most C_ENV_BOOTBLOCK_SIZE limitsKyösti Mälkki
With top-aligned bootblock this is no longer globally needed. The default maximum is now a generous 256 KiB with couple platforms having lower limits of 32 KiB and 64 KiB. Change-Id: Ib1aee44908c0dcbc17978d3ee53bd05a6200410c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-26soc/intel: Move c-state resource defineMarc Jones
De-duplicate the MWAIT_RES define. Move it to intel/common/block. Change-Id: I43903e4f02a549f53101e79f6febd42f2e54f98f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49802 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25soc/intel/{skl,cnl,xsp,icl,tgl,ehl,adl,jsl}: use common LPC mirroringMichael Niewöhner
Drop the old, redundant code for mirroring LPC registers to DMI and make use of the new common code. Select the new Kconfig option for LPC DMI mirroring by the option SOC_INTEL_COMMON_PCH_BASE, which is selected by platforms starting with SPT, except APL and Xeon-SP. For Xeon-SP, select DMI and the new Kconfig directly. APL, even though it's younger than SPT, does not need mirroring. Test: Set LGMR address by calling `lpc_open_mmio_window` and check that both the PCI cfg and DMI LGMR register get written correctly. Tested successfully on clevo/cml-u. Change-Id: Ibd834f1474d986646bcebb754a17db97831a651f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-23ACPI: Add helpers for CBMEM_ID_POWER_STATEKyösti Mälkki
Create uniform logging for the (unlikely) case of a CBMEM entry disappearing. Change-Id: I7c5414a03d869423c8ae5192a990fde5f9582f2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23ELOG: Add const qualifier for chipset_power_stateKyösti Mälkki
It is never allowed for ELOG to modify the state. Change-Id: Ie24df3969a3744f27b23997471666e2490e24b84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-20soc/intel/*: drop broken LPC mmio codeMichael Niewöhner
The code for setting the LPC generic memory range uses an array of fixed address ranges not needing explicit decoding, to decide if the address needs to be written to the LGMR register. Most platforms only mistakenly add the PCH reserved mmio range, that is not decoded generally, effectively breaking the mechanism. Only APL uses the array correctly. That code, in it's current state, does not work (except for APL) and currently, there is not a single user. Thus, drop it before people start using it. Change-Id: I723415fedd1b1d95c502badf7b0510a1338b11ac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-20ACPI GNVS: Drop most dev_count_cpu()Kyösti Mälkki
Only amd/picasso and amd/stoneyridge have reference to PCNT and that could be replaced with acpigen. Remove the PCNT name from GNVS OperationRegion elsewhere. Change-Id: I7dd45a840b3585fd24c31fd923b991c34ab4d783 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-18soc/intel/common: Move L1_substates_control to pcie_rp.hEric Lai
L1_substates_control is common define. Move out of soc level. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I54574b606985e82d00beb1a61cce3097580366a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-12soc/intel: rename uart_max_indexMichael Niewöhner
The name `..._index` is confusing since the maximum index of an array is not `ARRAY_SIZE(array)` but `ARRAY_SIZE(array) - 1`. Rename `uart_max_index` to `uart_ctrlr_config_size` to make the name match the variable´s value. Change-Id: I7409c9dc040c3c6ad718abc96f268c187d50d79c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-11soc/intel/{icl,tgl,jsl,ehl}: add LPIT supportMichael Niewöhner
Add SLP_S0 residency register and enable LPIT support. Change-Id: Id1abbe8dcb7796eeb26ccb72f1f26cf7a040dba4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49048 Reviewed-by: Lance Zhao Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/uart: Drop SoC callback `soc_uart_console_to_device`Furquan Shaikh
This change renames `struct uart_gpio_pad_config` to `struct uart_controller_config` and adds a new parameter devfn (which expects devfn for the UART controller corresponding to the index in PCI_DEVFN() format). This gets rid of the SoC callback to get `struct device` pointer to the UART controller device. Change-Id: Id0712a0038f2cc1a61b8b5a58fa155f14e7949a5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49212 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed funcionality. Change-Id: I7bdbe0d6f795252e713e9785ada2b6320e6604b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48717 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant ChromeOS setup for GNVSKyösti Mälkki
Already done in common gnvs_get_or_create() implementation once gnvs_chromeos_ptr() is defined for platforms. Change-Id: I90fa2bc28ae76da734b3f88be057435aed9fe374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant CONSOLE_CBMEM setup in GNVSKyösti Mälkki
Already done from common gnvs_get_or_create() implementation after gnvs_cbmc_ptr() is defined. Change-Id: I77c292cd9590d7fc54d8b21ea62717a2d77e5ba4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48702 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel: Drop `dev` parameter from soc_get_gen_io_dec_range()Furquan Shaikh
This change drops the parameter `struct device *dev` from the function `soc_get_gen_io_dec_range()`. This function uses the parameter dev to get a pointer to config structure for extracting the decode ranges configured by mainboard in device tree. However, there is no separate chip driver for the LPC device which means that the SoC code can use `config_of_soc()` to get to SoC chip config instead of using the LPC device. This change is being done in preparation to clean up the device tree/chip config access in early stages that allows for optimizing the inclusion of device tree elements in the early stages. Change-Id: I3ea53ddc771f592dd0ea5e5e809be2d2eff7f16d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08soc/intel/jasperlake: Update acoustic noise related parametersMaulik V Vaghela
We need to fill Acoustic noise mitigation related UPDs only in case when acoustic noise mitigation is enabled. This will also clarify the user that they need to enable Acoustic noise mitigation while using this config in mainboard. We're only filling UPD for domain VR index 0 since there is only one VR domain for JSL (VCCIN VR). Reference: JSL EDS (Document# 613601) (Chapter 3.4) BUG=None BRANCH=dedede TEST=UPD values are getting filled correctly when Acoustic noise mitigation is enabled. Change-Id: I0cf4ccfced13b0d32b3d20713eace63e66945332 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Enable USB2 PHY SUS PG for s0ix qualificationKrishna Prasad Bhat
USBSUSPGQDIS is a disqualifier bit which will allow platform to enter s0ix even if USB2 PHY SUS is not power gated. Disabling this bit will ensure that USB2 PHY SUS is power gated before entering s0ix. BUG=b:175767084 BRANCH=dedede TEST=s0ix works on drawcia and USB wake from s0ix works fine. Change-Id: I20bad3f79141799c88a16272ea822b9e3dede504 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2020-12-30soc/intel/common: Move gfx.asl to drivers/intel/gmaMatt DeVillier
Adjust platform-level includes as needed. Change-Id: I376349ccddb95c166f0836ec1273bb8252c7c155 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/intel: hook up new gpio device in the soc chipsMichael Niewöhner
This change adds the required gpio operations struct to soc/common gpio code and hooks them up in all socs currently using the gpio block code, except DNV-NS, which is handled in a separate change. Also, add the gpio device to existing chipset devicetrees. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: I81dbbf5397b28ffa7537465c53332779245b39f6 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48583 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel: Remove INTEL_CAR_NEM_ENHANCED_V2 config optionShreesh Chhabbi
SF Mask MSRs' Programming which was done under this config selection will be moved under a new config option called CAR_HAS_SF_MASKS. This segregates the eNEM programming sequence based on sub features supported in each processor. Bug=b:171601324 BRANCH=volteer Test=Build volteer build and boot on Delbin EVT. Change-Id: If4d8d1ec52b7b79965fe1a957c48f571ec56dc63 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/jasperlake: Enables CSE Lite driver for JSL platform in the romstageSridhar Siricilla
This patch sets up cse_fw_sync() call in the romstage.The cse_fw_sync() must be called after DRAM initialization. BUG=b:174694480 Test=Verified on Drawlet Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I43030e77f6ede53c23e6c9e65d34db85c141e13a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48280 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/jasperlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I40eba4128f1c5bafc7023b28dbaf40c0aca3f490 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-10soc/intel/common: Adapt XHCI elog driver for reuseTim Wawrzynczak
Currently this XHCI driver assumes the PCH XHCI controller, but the TCSS or North XHCI block has a similar enough PCI MMIO structure to make this code mostly reusable. 1) Rename everything to drop the `pch_` prefix 2) xhci_update_wake_event() now takes in a pci_devfn_t for the XHCI controller 3) soc_get_xhci_usb_info() also now takes a pci_devfn_t for the XHCI controller BUG=b:172279037 TEST=plug in USB keyboard while in S0, enter S0ix and verify entry via EC; type on keyboard, verify it wakes up, eventlog contains: 39 | 2020-12-10 09:40:21 | S0ix Enter 40 | 2020-12-10 09:40:42 | S0ix Exit 41 | 2020-12-10 09:40:42 | Wake Source | PME - XHCI (USB 2.0 port) | 1 42 | 2020-12-10 09:40:42 | Wake Source | GPE # | 109 which verifies it still functions for the PCH XHCI controller Change-Id: I9f28354e031e3eda587f4faf8ef7595dce8b33ea Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47411 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/common/dmi: Move DMI defines into DMI driver headerSrinidhi N Kaushik
Move definitions of DMI control register and Secure Register Lock (SRL) bit into common/block/dmi driver header file. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Iefee818f58f399d4a127662a300b6e132494bad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48257 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05soc/intel/jasperlake: Add Acoustic noise mitigation configurationMaulik V Vaghela
This patch exposes acoustic noise mitigation related UPDs/configuration to be filled from devicetree. For each variant, we might have different values for various parameters. Filling it from devicetree will allow us to fill separate values for each board/variant. Note that since JasperLake only has one VR, we're only filling index 0 for slew rate and FastPkgCRampDisable. BUG=b:162192346 BRANCH=dedede TEST=code compilation is successful and values from devicetree are getting reflected in UPDs Change-Id: Id022f32acc3fd3fe62f78e3053bacdeb33727c02 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-29soc/intel: Configure P2SB before other PCH controllersFurquan Shaikh
This change updates bootblock_pch_early_init() to perform P2SB configuration before any other PCH controllers are initialized. This is done because the other controllers might perform PCR settings which requires the PCR base address to be configured. As the PCR base address configuration happens during P2SB initialization, this change moves the p2sb init calls before any other PCH controller initialization. BUG=b:171534504 Change-Id: I485556be003ff5338b4e2046768fe4f6d8a619a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47885 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-27soc/intel/jasperlake: Enable VT-d and generate DMAR TableMeera Ravindranath
Update UPDs required for the creation of DMAR table. By default coreboot was not generating DMAR table for IOMMU which was resulting in below error message in kernel: DMAR: [Firmware Bug]: No DRHD structure found in DMAR table DMAR: No DMAR devices found These changes will publish DMAR table through ACPI and will not result in the above error. BUG=b:170261791 BRANCH=dedede TEST=Build Dedede, boot to kernel and check dmesg if DMAR table exists. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I97a9f2df185002a4e58eaa910f867acd0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
Replace the two obsolete LPID implementations with the new PEPD device. The PEPD device gets included in the plaforms' `southbridge.asl`, since it is required to load the `intel_pmc_core` module in Linux, which checks for the _HID. (See CB:46469 for more info on that.) There is no harm for mainboards not supporting S0ix, because the _DSM function won't be called with the LPS0 UUID on such boards. Such boards can use the debugging functionality of `intel_pmc_core`, too. Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10soc/intel/jasperlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is logged into the event log for one of the internal devices eg. USB bluetooth. 8 | 2020-11-05 15:04:16 | S0ix Enter 9 | 2020-11-05 15:04:29 | S0ix Exit 10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8 11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109 12 | 2020-11-05 15:05:08 | S0ix Enter 13 | 2020-11-05 15:05:14 | S0ix Exit 14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8 15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109 Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Enable Intel FIVR RFI settingsMaulik V Vaghela
We already have RFI UPD settings to mitigate RFI noise issues in platform. These UPDs were not getting filled via devicetree but needed to be filled from fsp_params.c Exporting these UPDs to chip.h will allow OEM/ODMs to fill it directly from devicetree and also allow us to control it based on boards instead of keeping it common across SoCs. BUG=b:171683785 BRANCH=None TEST=Compilation works and we're able to fill UPD from devicetree.Value gets reflected in FSP UPDs. Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Correct GPIO pad sequence for community pad groupMaulik V Vaghela
In gpio.c file, we have community group array for each comm, representing gpio groups within that community. Like there might be group H,D, VGPIO and C within community 1. Community also may have some reserved gpio and we also define those in an array which indicates OS can't use those GPIO (through PAD_BASE_NONE) Now when we define reserved pads in the middle of actual community pads, it creates an issue while calculating an offset for GPIO host own pad register. This is because function actually checks current gpio index (lets say vgpio_39 in our case) and tries to get group index from an array which we have defined. If we have defined reserved gpios in between 2 communities, index calculated will also account for reserved GPIO and register offset calculation will move to next set of register (offset 0xC instead of offset 0x8). Because of this coreboot won't configure HOST_OWN_PAD register correctly and driver will not be able to get non-SMI interrupts for related gpio. Align pad group as per EDS and pin-ctrl driver in linux kernel. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=VGPIO community index is correctly calculated. Drawlat board boots fine with this change and warm reset also works. Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/jasperlake: Update reserved GPIO names in gpio_soc_defs.hMaulik V Vaghela
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting this GPIOs with proper name to align with EDS volume 2 Also removing unused GPIOs at the end of community 4 (group E). Since those reserved GPIOs are at the end of the community, it won't affect the offset calculations within community. This change will also help us aligning pad numbering with kernel pin-ctrl drivers too. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=Platform boots fine and basic functionality such as SD, Wifi works. Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-03soc/intel/{tgl,jsl}: Enable logging of wake sources for S0ixFurquan Shaikh
This change adds elog.c to smm-y for Tiger lake and Jasper Lake platforms to enable the logging of wake sources in eventlog for S0ix. BUG=b:172272078,b:169731044 BRANCH=volteer TEST=Verified on volteer that wake sources are correctly logged for S0ix: 8 | 2020-11-02 13:54:27 | S0ix Enter 9 | 2020-11-02 13:54:33 | S0ix Exit 10 | 2020-11-02 13:54:33 | Wake Source | RTC Alarm | 0 11 | 2020-11-02 13:54:49 | S0ix Enter 12 | 2020-11-02 13:54:54 | S0ix Exit 13 | 2020-11-02 13:54:54 | Wake Source | Power Button | 0 14 | 2020-11-02 13:55:04 | S0ix Enter 15 | 2020-11-02 13:55:10 | S0ix Exit 16 | 2020-11-02 13:55:10 | Wake Source | GPE # | 112 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1c40dfba6c82ca45a21d35c5a2725e4d30855d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47141 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel: Select SOC_INTEL_COMMON_BLOCK_CAR as per alphabetical orderSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7adf430e6ce5f78f68a0c73af841fbdc62bb5dc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47057 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel: Use of common reset code blockSubrata Banik
This patch removes all redundant reset code block from each SoC and make use of common reset code block(fsp_reset.c) based on SOC_INTEL_COMMON_FSP_RESET. Respective SoC Kconfig to choose correct FSP global reset type as per FSP integration guide. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I71531f4cf7a40efa9ec55c48c2cb4fb6ea90531f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/jasperlake: Set the GpioOverride configurationRonak Kanabar
Set "GpioOverride" config to override FSP gpio configuration. FSP will not configure any GPIOs and rely on GPIO settings programmed before moved to FSP. BUG=b:150666058 TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: Ia4036cf0be3a6036d70920743958dc327a652077 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45901 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel: Add a driver for CNVi WiFi/BT controllersFurquan Shaikh
This change adds a common block driver for CNVi WiFi/BT controllers in Intel SoCs. This driver uses the common PCI dev operations in addition to generating ACPI device node and returning ACPI name for the controller device. This change also selects this driver for CML, GLK, ICL, JSL and TGL. Change-Id: I69a832be918d4b9f4fbe3a40913d4542a457a77c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-28soc/intel: deduplicate ACPI timer emulationMichael Niewöhner
The code for enabling ACPI timer emulation is the same for the SoCs SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to common code. APL differs in not having the delay settings. However, the bits are marked as "spare" and BWG mentions there are no "reserved bit checks done". Thus, we can write them unconditionally without any effect. Note: The ACPI timer emulation can only be used by SoCs with microcode supporting CTC (Common Timer Copy) / ACPI timer emulation. Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-26Revert "soc/intel/jasperlake: Allow mainboard to override chip configuration"Karthikeyan Ramasubramanian
This reverts commit 5acea15d63e821a1bc416d206162ed030cd5d57c. This change got accidentally merged. There is no need for mainboard to override chip configuration. BUG=None TEST=Build and boot Drawlat to OS. Change-Id: I166ba7e5ee50a6329032eae8e17b9a554b094e2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-26soc/intel: drop unneeded ISST configuration codeMichael Niewöhner
The code configuring ISST (Intel SpeedShift Technology) sets the ISST capability bits in CPUID.06H:EAX. It does *not* activate HWP (Hardware P-States), which shall be done by the OS only. Since the capability is enabled by default (opt-out), there is nothing to do for us in the enabled-case. Practically speaking, there is no value at all in disabling the capability, since one can configure the OS to not enable HWP if that is desired. The two other bits for EPP and HWP interrupt that were set by the code are not set anymore, too. It was tested, on three platforms so far (CML-U, KBL-H, SKL-U), that these are set as well by default in the MSRs reset value (0x1cc0). To reduce complexity and duplicated code without actual benefit, this code gets dropped. The remaining dt option will be dropped in CB:46462. Test: Linux on Supermicro X11SSM-F detects and enables HWP: [ 0.415017] intel_pstate: HWP enabled Change-Id: I952720cf1de78b00b1bf749f10e9c0acd6ecb6b7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46460 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26src: Include <arch/io.h> when appropriateElyes HAOUAS
Change-Id: I4077b9dfeeb2a9126c35bbdd3d14c52e55a5e87c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45404 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24{cpu,soc}/intel: deduplicate cpu codeMichael Niewöhner
Move a whole bunch of copy-pasta code from soc/intel/{bdw,skl,cnl,icl, tgl,ehl,jsl,adl} and cpu/intel/{hsw,model_*} to cpu/intel/common. This change just moves the code. Rework is done in CB:46588. Change-Id: Ib0cc834de8492d59c423317598e1c11847a0b1ab Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46274 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21soc/intel: convert XTAL frequency constant to KconfigMichael Niewöhner
This converts the constant for the XTAL frequency to a Kconfig option. Change-Id: I1382dd274eeb9cb748f94c34f5d9a83880624c18 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-21soc/intel/common: add Kconfig for PM Timer emulation supportMichael Niewöhner
Add a Kconfig for SoCs to indicate PM ACPI timer emulation support and select it by the appropriate SoCs. This Kconfig gets used in the follow-up changes. Change-Id: I6ded79221a01655f298ff92b8bd2afabd1d2a3ff Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-19soc/intel/*: drop useless XTAL shutdown qualification codeMichael Niewöhner
The XTAL shutdown (dis)qualification bit already unconditionally gets set to 1 by FSP for these platforms, making this code redundant. Change-Id: I7fa4afb0de2af1814e5b91c152d82d7ead310338 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46016 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-14soc/intel/jasperlake: Enable CAR NEM enhanced modeAamir Bohra
TEST=Build and boot waddledoo board Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I067b13acfcea940e2e4ae6fc99b5d77458de35a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43705 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12soc/intel: Configure PAVP at compile-timeBenjamin Doron
Expose configuration of Intel PAVP (Protected Audio-Video Path, a digital rights protection/management (DRM) technology for multimedia content) to Kconfig. Per the FSP default, this was always being enabled previously. Change-Id: I2aae741bb30e3be3c64324cd6334778bd271a903 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12soc/intel/jasperlake: Allow mainboard to override chip configurationKarthikeyan Ramasubramanian
Add a weak override function to allow mainboard to override chip configuration like GPIO PM. BUG=None TEST=Build and boot waddledee to OS. Ensure that the suspend/resume sequence works fine. Change-Id: I40fa655b0324dc444182b988f0089587e3877a47 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12soc/intel/jasperlake: Correct SaGv mappingAamir Bohra
Jasper Lake support 3 Memory train frequencies low. mid and high. Update the SaGv configuration accordingly. Change-Id: I366de1ea7cf41c56b2954b8032c69bfba81058e2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
2020-10-12soc/intel/jasperlake: Remove GPIO community 2 from DSDTEvan Green
The kernel driver enumerates communities 0, 1, 4, and 5, and assigns these addresses based on the BARs enumerated by coreboot. Coreboot was defining communities 0, 1, 2, 4, and 5. This meant the kernel was not controlling GPIOs in communities 4 and 5, since the resources were wrong. Remove community 2 for now. We can add it back if the kernel ends up needing it. BUG=b:169444894 TEST=Test controlling GPP_E5, verify actually toggles register. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I823e1aa942cfccadde01b9371d481457ab088c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46115 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/intel/jasperlake: Add VR Configuration settingsMeera Ravindranath
This CL fixes the CPU Throttling issue. BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3fa32218040263f0abef8b9dd4c52efb31289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-08Revert "soc/intel/jasperlake: Disable PAVP UPD"Nico Huber
This reverts commit 69589294c205b616e80cafbbfb0b33e105a75386. No reason was given why this should deviate from the other platforms and the author can't explain it. Change-Id: I2e8d6f9bd4ebba69b6f7cdd9a1c5d08aaf2e798f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08soc/intel: Make use of common gfx.aslSubrata Banik
Add gfx.asl file for all IA SOCs to allow for graphics-related ACPI devices and methods. TEST=Able to build and boot TGL platform Dump and disassemble DSDT, verify GFX0 device present as below Device (GFX0) { Name (_ADR, 0x00020000) // _ADR: Address } Change-Id: I5560e900a77872552df1064dc3b7a8148e35d682 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-06templates: add an empty SPD to SPD_SOURCESPaul Fagerburg
Add an empty SPD in SPD_SOURCES when creating a new variant of hatch, volteer, waddledee, or waddledoo, so that coreboot can build successfully. For variants that use spd_tools, add an empty mem_parts_used.txt so that the developer can add the supported memory parts and regenerate the Makefile.inc with the correct SPD references. Add an empty SPD for LPDDR4x for waddledee and waddledoo to use. BUG=b:169422833 TEST=create a new variant of hatch, volteer, waddledee, and waddledoo. Observe that each one succeeds. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I06dfb6103701bf8949180595f1e98fac48bcc585 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-05soc/intel: remove duplicate weak versions of mainboard_get_dram_part_num()Nick Vaccaro
Consolidate all weak declarations of mainboard_get_dram_part_num() to instead use the common definition in lib/spd_bin.c. BUG=b:168724473 TEST="emerge-volteer coreboot && emerge-nocturne coreboot && emerge-dedede coreboot" and verify build succeeds without error. Change-Id: I322899c080ab7ebcf1cdcad3ce3dfa1d022864d1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05soc: move mainboard_get_dram_part_num prototype to memory_info.hNick Vaccaro
BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-nocturne coreboot && emerge-dedede coreboot" and verify they build successfully. Change-Id: I8b228475621ca1035fe13f8311355fc3b926e897 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05mb, soc: change mainboard_get_dram_part_num() prototypeNick Vaccaro
Change mainboard_get_dram_part_num() to return a constant character pointer to a null-terminated C string and to take no input parameters. This also addresses the issue that different SOCs and motherboards were using different definitions for mainboard_get_dram_part_num by consolidating to a single definition. BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch coreboot" and verify build completes successfully. Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common ish.aslSubrata Banik
This patch moves ish.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CML platform. 1) Dump and disassemble DSDT, verify ISHB device present inside common ish.asl is still there with correct _ADR value. 2) Verify no ACPI error seen while running 'dmesg` from console. CML platform: Device (ISHB) { Name (_ADR, 0x00130000) // _ADR: Address Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name } TGL/JSL platform: Device (ISHB) { Name (_ADR, 0x00120000) // _ADR: Address Name (_DDN, "Integrated Sensor Hub Controller") //_DDN: DOS Device Name } Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I33c1649d7a632c7b147e1bf307cfb5c1dfd84c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/common/block/acpi: Factor out common smbus.aslSubrata Banik
This patch moves smbus.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify SBUS device present inside common smbus.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ib1ae48f7ece3e521501d92c40cd551287ea2f1ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/45979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05soc/intel/jasperlake: Delete unused ipu.aslSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I8c7363d442ed40c36fc01dc3608bab864865f29d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45977 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common pch_glan.aslSubrata Banik
This patch moves pch_glan.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify GLAN device present inside common pch_glan.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I479678c864eba39e5ab04f658600e8cba48198ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/45975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Make use of PMC low power program from common blockSubrata Banik
List of changes: 1. Select PMC_LOW_POWER_MODE_PROGRAM from applicable SoC directory 2. Remove redundant PMC programming from SoC and refer to common code block 3. Remove unused 'reg8' and 'reg32' variable as applicable from SoC function. Change-Id: I18894c49cfc6e88675b5fb71bca0412e5639fb4b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45796 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-03soc/intel: Move pch_misc_init() to common codeSubrata Banik
List of changes: 1. Move pch_misc_init() into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. 3. Create macros for IO port 0x61 and 0x70 as applicable. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: Ie36ee63869c076d251ccfa5409001d18f22600d7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Move soc_pch_pirq_init() to common codeSubrata Banik
List of changes: 1. Rename soc_pch_pirq_init() as pch_pirq_init() and move into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: I856b5ca024e58fd14b4d1721f23d9516a283ebf8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-03soc/intel: Move pch_enable_ioapic() to common codeSubrata Banik
List of changes: 1. Move pch_enable_ioapic() into common block code. 2. Remove redundant LPC functions from SoC directory and refer from block/lpc directory. TEST=Able to build and boot hatch and tglrvp platform without seeing any functional impact. Change-Id: I2a6afc1da50c8ee5bccda7f5671b516dc31fe023 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-02drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES configShelley Chen
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't allow writing to SPI flash when early stages are running XIP from flash. If BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected, BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms that write to flash in the earlier stages, assuming that they have that capability. BUG=b:150502246 BRANCH=None TEST=diff the coreboot.rom files resulting from running ./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless with and without this change to make sure that there was no difference. Also did this for GOOGLE_CANDY board, which is baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES enabled). Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-29soc/intel/jasperlake: Add IGD, MCH Device IDKrishna Prasad Bhat
Add IGD Device ID and MCH Device ID for Jasperlake. Reference is taken from Jasperlake EDS volume 1(Document Number: 613601). TEST=Build and boot Jasperlake platform. Change-Id: I00ee7950ffa378b428a76bf367a9a05ab287e7ed Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-28soc/intel/common/block/lpc: add acpi nameJonathan Zhang
Add ACPI name for LPC device. The name matches with what is in soc/intel/common/block/acpi/acpi/lpc.asl. Since several Intel SOCs select CONFIG_SOC_INTEL_COMMON_BLOCK_LPC, remove duplicated acpi name assignments. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: If418c83caafe5d9e2af135a8946cbe5eb687b9ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/45590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-27soc/intel/common/block/acpi: Factor out common gpio_op.aslSubrata Banik
This patch moves gpio_op.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify all methods present inside common gpio_op.asl like GRXS, GTXS etc. are still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I248f5e66994d2f3d6b0bd398347e7cf9ae7f2cc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-27soc/intel/{jsl,tgl}: Fix GRXS function to get GPIO number properSubrata Banik
This patch ensures that GRXS perform PAD_CFG0_RX_STATE mask first and then right shift PAD_CFG0_RX_STATE_BIT to get correct GPIO number. Change-Id: I96611936f70f79e9dc5ee9414ec68cef00d0d13a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45738 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-26arch/x86: Introduce `ARCH_ALL_STAGES_X86_32`Angel Pons
Nearly every x86 platform uses the same arch for all stages. The only exception is Picasso. So, factor out redundant symbols from the rest. Alder Lake is not yet complete, so it has been skipped for now. Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-25soc/intel/{jsl,tgl}: Refactor gpio_op.aslSubrata Banik
Also align GPMO ASL function with TGL. Change-Id: Ia40af2cba9867838a1f99141481a5e78cffa0111 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-22soc/intel/jasperlake: Enable processor thermal control using PCI_DEVFNSumeet R Pawnikar
Enable processor thermal control using PCI dev path function instead of Device4Enable parameter in devicetree. This change removes the dependency on Device4Enable in devicetree. We can enable and disable this thermal control using on and off support with PCI device entry in devicetree. BRANCH=None BUG=None TEST=Built and tested on dedede board Change-Id: I0463236996ad001af506c9966840b27fe44d60d2 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-22Revert "soc/intel: Refactor do_global_reset() function"Furquan Shaikh
This reverts commit 77cc3267fc970c710299a164ecbc471f9287d719. Reason for revert: Breaks quark and also needs breaking down into multiple CLs as commented by Nico on CB:45541 Change-Id: Idf4ca74158df15483856754ee24cc4472a8e09b0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-21src/soc/intel: Drop unneeded empty linesElyes HAOUAS
Change-Id: Id93aab5630e928ee4d7e957801e15a4cc8739fae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44594 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/intel: Refactor do_global_reset() functionSubrata Banik
List of changes: 1. Rename do_global_reset() to force_global_reset() 2. Make force_global_reset() function static 3. Implement force_global_reset() into common/reset.c to avoid dedicated SoC implementation 4. Remove redundant force_global_reset() implementation from dedicated SoC 5. Make direct call to global_reset() from cse_lite.c 7. Drop CONFIG_HAVE_CF9_RESET_PREPARE Kconfig from APL SoC due to common reset (soc/intel/common/reset.c) code migration 8. Remove unused function send_global_reset() from SKL me.c due to common reset code migration 9. Delete heci.c from APL SoC as unused Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I1c5dc8d5606ef28ffaed4a64d90f470ae1ffc2a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21soc/intel/jsl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19soc/intel/common/block/cse: Refactor cse_request_global_reset() functionSubrata Banik
List of changes: 1. Check if CSE is enabled from devicetree.cb 2. Create helper function cse_request_reset() 3. Modify caller function argument cse_request_global_reset() Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14soc/intel/{cnl,icl,jsl,tgl}: Clean up chip.hSubrata Banik
Removed unused header files in chip.h Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Idb9b1ed23df3dbb9dad4d36651064c21a4d913fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/jasperlake: Clean up iomap.h and systemagent.hSubrata Banik
List of changes: 1. Convert inconsistent white space into tab. 2. Group together all MCHBAR offset macros. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ief13406b0116ce0f0b7472e5b133b3fac06f6e27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-06soc/intel: skl,cnl,icl,jsl,tgl: disable usb over-current pin by defaultMichael Niewöhner
Fsp configures the USB over-current pin and overrides the according pad configuration to NF1, regardless of the port being configured as disabled. Thus, set the OC pin to 0xff ("disabled") in this case to prevent this. This allows us to skip setting USBx_PORT_EMPTY in the devicetree for disabled USB ports. Change-Id: Ib8ea2ea26c0623d4db910e487b37255e907b299d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45112 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04soc/intel/{jasperlake,tigerlake}/Kconfig: Drop redundant 'select ↵Elyes HAOUAS
CPU_INTEL_COMMON_SMM' CPU_INTEL_COMMON_SMM is set to yes if CPU_INTEL_COMMON at cpu/intel/common/Kconfig. Change-Id: I7c8e1bb6b7c3199a24711b64a6cbba4de190c6d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex). BUG=b:160157545 TEST=run gen_part_id for volteer variants and verify that it changed spd names to prepend the "lp4x-" to the filename.. Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28util: volteer/dedede: move generic SPDs to common locationNick Vaccaro
Now that generic SPD files have the memory type prepended to the filename, they can be stored in the same location. This CL moves the generic SPDs to the new location. Change the ddr4 gen_part_id.go and gen_spd.go tools to use "ddr4_spd_manifest.generated" instead of "spd_manifest.generated". Change the lpddr4x gen_part_id.go and gen_spd.go tools to use "lp4x_spd_manifest.generated" instead of "spd_manifest.generated". Move TGL DDR4 and LPDDR4x generic SPDs into a common location. Move JSL DDR4 and LPDDR4x generic SPDs into a common location. Change the volteer/spd/Makefile.inc to use the new path for the spds. Change the dedede/spd/Makefile.inc to use the new path for the spds. BUG=b:165854055 TEST="emerge-volteer coreboot" and verify all variants build correctly. Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-25soc/intel/jasperlake: Disable multiphase SI initRonak Kanabar
Jasper Lake does not have any use case for multiphase SI init so Disable it. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: I2d591b46c403e68ff0b41ac8f87c742ae774111e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-25soc/intel/jasperlake: Select PLATFORM_USES_FSP2_2Ronak Kanabar
Add support for FSP 2.2 for jasperlake by selecting PLATFORM_USES_FSP2_2 config. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: Ia606ec26da93242ecdd602a9b3badbece5dcd034 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/intel/jasperlake: Run pmc_set_acpi_mode() during .init in pmc_opsKane Chen
pmc_set_acpi_mode will set EC SMI mask to 1 in the end. However google_chromeec_events_init will clear EC SMI mask. If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask will be 0 in depthcharge and causes lidclose function not working. So, pmc_set_acpi_mode() should run after google_chromeec_events_init. This code is mainly from CB:42677 BUG=b:16338215 TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo. Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/intel/jasperlake: use UDK_202005_BINDINGRonak Kanabar
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init support through the FSP-S arch UPD. The FSP-S arch UPD structure is added in edk2 stable 2020 branch. Switching the support for JSL to edk2-stable202005 to intercept the FSP2.2 related support. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: rename ELOG_WAKE_SOURCE_GPIO to ELOG_WAKE_SOURCE_GPEAaron Durbin
The wake source macro for GPE events was using 'GPIO'. However, current usage is really all GPEs. Therefore, provide clarity in the naming in order to allow for proper GPIO wake events that are separate from the ACPI GPE block. BUG=b:159947207 Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18soc/intel/jasperlake: Fix PMC_GPE_DW mappingMeera Ravindranath
PMC_GPE_DW mapping was not configured correctly and hence coreboot skipped programming Tier 1 GPIOs resulting in failure of S3 wake from Trackpad. TEST=System should wake from S3 via trackpad Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-18soc/intel/jasperlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBMeera Ravindranath
Increase the cbmem console size from 3KB to 5KB in order to fix console overflow. Change-Id: Id7eb64feb91ec29df5402b2fb1bac3ff73cc5bb3 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44326 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18soc/intel/jasperlake: Configure IPU based on devicetreeMaulik V Vaghela
FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. BUG=None BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-17soc/intel/jasperlake: Add IGD Device IDKrishna Prasad Bhat
Add IGD Device ID for Jasperlake. Reference is taken from Jasperlake EDS volume 1(Document Number: 613601). TEST=Build and boot Jasperlake platform. Change-Id: Iab3ba286f36afbf9533ac3cc62891fa390ca2441 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44000 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 05:04:21 +0000