summaryrefslogtreecommitdiff
path: root/src/soc/intel/jasperlake
AgeCommit message (Collapse)Author
2022-12-02soc/intel/cmn/cse: Create another config for sending CSE EOP cmd lateSubrata Banik
Presently, coreboot supports two instances of sending EOP cmd to the Intel CSE. 1. Sending EOP cmd to CSE during `.final` operation from cse pci driver. 2. Starting with Alder Lake, the recommendation was to send EOP to CSE earlier than CSE `.final` operation. Since then it's referred to as `Sending EOP Early`. This method helped to save the CSE EOP response time significantly. During Meteor Lake platform, CSE EOP response time has become non-deterministic and we have figured that sending EOP command later than CSE .final operation is actually helping to optimize the boot time significantly (around ~150ms savings compared to sending from `.final` ops and ~5sec compared to sending CSE early). Hence, this patch intended to create yet another kconfig for sending CSE late (specifically after `.final` operation). The idea for this newer config is to use the boot state machine for sending CSE EOP cmd. The patch train in this series would add the specific changes to allow sending EOP late and perform other essential operations required prior booting to OS as coreboot decided to skip calling into FSP Notify phase. Starting with Jasper Lake, coreboot sends EOP before loading payload hence, this config is applicable for those platforms. The current plan is that Intel Jasper Lake, Tiger Lake and Meteor Lake platform will select this newer config from SoC code. BUG=b:260041679 TEST=Able to send EOP command successfully for Google/Taeko. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iea512cd5b79d61dd5d5a962079baf525027c831f Reviewed-on: https://review.coreboot.org/c/coreboot/+/69976 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-28sb,soc/intel: Address TCO SECOND_TO_STS name collisionKyösti Mälkki
Later soc/intel/common/smbus addresses TCO2_STS as a separate 16-bit register, while baytrail and braswell assumes 32-bit wide TCO1_STS to extend as TCO2_STS. In src/soc/intel/denverton_ns: #define TCO2_STS_SECOND_TO 0x02 In soc/intel/baytrail,braswell: #define SECOND_TO_STS (1 << 17) Elsewehere #define SECOND_TO_STS (1 << 1) It's expected that we remove the first (1 << 17) case and only access TCO2_STS as a separate 16-bit register. For now, use unique names to avoid confusion. Change-Id: I07cc46a9d600b2bf2f23588b26891268e9ce4de0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-26src/soc/intel: Remove unnecessary space after castsElyes Haouas
Change-Id: I098104f32dd7c66d7bb79588ef315a242c3889ba Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-17soc/intel: Add node_num to dimm_info struct + adjust dimm_info_fillDavid Milosevic
The dimm_info structure (defined in src/include/memory_info.h) currently does not hold information about the DIMM's node/controller ID. This patch extends the dimm_info structure by adding a new field for the node ID, called node_num. Also, adapt the dimm_info_fill() function accordingly to populate the newly-added field. Background: These changes are necessary for the Atlas mainboard, where we are currently experiencing issues with the DIMMs device/bank locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a distinct NODE ID. By looking at the smbios table we see Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order to distinguish them. This patch was tested by building and booting for the Alderlake-P RVP board, which has the same DIMM slot configuration as the Prodrive Atlas mainboard. Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-08soc/intel: Use `PWRMBASE` over static `Index 0` for PMCSubrata Banik
This patch replaces static index 0 for PMC read resources with PCI configuration offset 0x10 (PWRMBASE). TEST=Able to build and boot Google, Rex to OS. Without this change: [SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 With this change: [SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 10 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iee2523876a8045e70effd5824afc327d1113038b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-04soc/intel: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I7da9c672ee230dfaebd943247639b78d675957e4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-10-31soc: Add SPDX license headers to MakefilesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-10-22payloads/edk2: Disable the CPU Timer Lib unless supportedSean Rhodes
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp Counter Frequence. For CPUs that do not support this instruction, EDK2 must include a different library which is the reason why this must be configured at build time. If this is enabled, and the CPU doesn't support 0x15, it will fail to boot. If is not enabled, and the CPU does support 0x15, it will still boot but without support for the leaf. Consequently, disabled it by default. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-10-12treewide: Use 'fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk'Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I7ddb4ea792b9a2153b7c77d2978d9e1c4544535d Reviewed-on: https://review.coreboot.org/c/coreboot/+/68275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-27acpi/acpi_pm.c: refactor acpi_pm_state_for_* functionsFabio Aiuto
Use just one function to get the chipset powerstate and add an argument to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the failure log accordingly. TEST: compile tested and qemu emulation successfully run Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-22soc/intel/spi: Move BIOS flash SPI controllers to fast SPI driverWerner Zeh
There are two classes of SPI controllers on Intel chipsets: * generic usable SPI controllers * SPI controller hosting the BIOS flash (fast SPI controller) While the first class can be used for generic peripheral attachment the second class mostly controls the BIOS flash and a TPM device (if enabled). The generic SPI driver is not fully applicable to the fast SPI controller. In addition, the fast SPI controller reports the reserved MMIO range used for the BIOS flash mapping so that the OS is aware of this range. This patch moves the fast SPI controller of all known SoCs to the fast SPI driver in common code. In addition, the PCI device for the fast SPI controller is removed from the function 'spi_soc_devfn_to_bus' as this is a callback of the generic SPI driver. Change-Id: Ia881c1d274acdcf7f042dd8284048a7dd018a84b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-20soc/intel/common/pch: Decouple CLIENT from BASEAngel Pons
In preparation to add a third option, have "Client" platforms select a dedicated Kconfig option instead of the common "_BASE" option. Rewrite the help texts to clarify what "Client" and "Server" mean, because the terms refer to the type of silicon and not to the market segment. Some uniprocessor (single-socket) servers are actually client platforms and there are some multi-socket workstations based on a server platform. Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-06-29soc/intel/jasperlake: Fix PMC read_resources callbackTim Wawrzynczak
The `limit` field for the PMC fixed BAR was incorrectly set to the `base + size + 1`, where it should be `base + size - 1`, to correctly tell the allocator the limit. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icf51333f438ce2597c008b48305cf5816dacd3f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65461 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-27soc/intel/*/Kconfig: Fix typo in commentAngel Pons
clcok ---> clock Change-Id: Ie41524f6500479162984fa9050d942f4e295f00a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-04soc/intel: Rename heci_init to cse_initSubrata Banik
This patch renames heci_init() to cse_init() as HECI initialization should have a bigger scope than just initializing the CSE (a.k.a HECI1 alone). BUG=none TEST=Able to build and boot google/taeko. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic7edd55ccdcd70b244615fa06f81803a0ae6ce80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-02soc/intel/common/cpu: Use SoC overrides to set CPU privilege levelSubrata Banik
This patch implements a SoC overrides to set CPU privilege level as the MSR is not consistent across platforms. For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151. BUG=b:233199592 TEST=Build and boot google/taeko to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4584516102560e6bb2a4ae8c0d036be40ed96990 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-05-16soc/intel/*: Use SSDT to pass A4GB and A4GSArthur Heymans
GNVS is more fragile as you need to keep struct elements in sync with ASL code. Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-29soc/{amd/stoneyridge,intel}: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. intel/apl is an exception since the bootblock size is limited to 32K. Change-Id: I5e02961183b5bcc37365458a3b10342e5bc2b525 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-27soc/intel/jasperlake: Revert CdClock settingSimon Yang
Revert CdClock setting and use default value 0xff. Previous problem was fixed by Jasperlake FSP in version 1.3.09.31, so we can use the original CdClock setting in baseboard. BUG=b:206557434 BRANCH=dedede TEST="Built and verified on magolor platform to confirm FSP solution works" Cq-Depend: chrome-internal:4662167 Change-Id: I50d65e0caaf8f3f074322cff5bbdc68bdb1bbf78 Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-27soc/intel/cmn/lockdown: Perform SA lockdown configurationSubrata Banik
`sa_lockdown_cfg` function ensures locking the PAM register hence, skip dedicated calling into `sa_lock_pam()` from the SoC `finalize.c` file. Dropped sa_lock_pam() call from ADL/CNL/EHL/JSL and TGL. Additionally, this patch enforces SA lockdown configuration for SKL and ICL as well. BUG=b:211954778 TEST=Able to build google/brya with these changes. > localhost ~ # lspci -xxx | less 00:00.0 Host bridge: Device 8086:4601 (rev 04) Bit 0 for all PAM registers a.k.a, PAMx_0_0_0_PCI.LOCK bit is set (meaning locked). Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibd464d2507393ed0c746eb1fbd10e36092ed5599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-22soc/intel/jasperlake: CNVi: Enable fewer wakeups to reduce SoC power consumptionJamie Chen
According to Intel TA#724456, work around the higher SoC power consumption in S0iX when CNVI has background activity. BUG=b:201263040 TEST=Turn on this setting and build and verify on Drawcia. The SLP_S0 toggling become slower or gone at the same CNVI background activity. Change-Id: I56439a406547e2ee1e47d34be14ecc9a8df04693 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63675 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-20soc/intel: clean up dmi driver codeWonkyu Kim
1. Remove dmi.h as it's migrated as gpmr.header 2. Remove unused gpmr definitions 3. For old platforms, define DMI defintions in c code for less code changes. TEST=Build Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib340ff1ab7fd88b1e7b3860ffec055a75e562de7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-06soc/intel/(cnl, jsl, tgl): Enable SOC_INTEL_COMMON_BASECODESridhar Siricilla
The patch SOC_INTEL_COMMON_BASECODE Kconfig for Comet Lake, Jasper Lake and Tiger Lake SoCs. It allows access to intelbasecode/debug_feature.h for Comet Lake, Jasper Lake and Tiger Lake SoCs. TEST=Build code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie55ded673c8fa0edf2ca6789b15771bd2e56c95e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-29soc/intel: Move `pmc_clear_pmcon_sts()` into IA common codeSubrata Banik
This patch moves `pmc_clear_pmcon_sts` function into common code and remove SoC specific instances. Accessing PMC GEN_PMCON_A register differs between different Intel chipsets. Typically, there are two possible ways to perform GEN_PMCON_A register programming (like `pmc_clear_pmcon_sts()`) as: 1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration register. 2. Using MMIO access when GEN_PMCON_A is a memory mapped register. SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to perform GEN_PMCON_A register programming using PMC MMIO. BUG=b:211954778 TEST=Able to build brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-03-25soc/intel/*/meminit.c: Fix formatted printArthur Heymans
This fixes building with clang. Change-Id: If2686b0938d34cd66393eb14205c5c8a5b3ba98b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-02-25intelblocks/pcie: Correct mapping between LCAP port and coreboot indexMAULIK V VAGHELA
coreboot uses port index which is 0 based for all PCIe root ports. In case of PCIe remapping logic, coreboot reads LCAP register from PCIe configuration space which contains port number (mostly 1 based). This assumption might not be true for all the ports in coreboot. TBT's LCAP registers are returning port index which are based on 2. coreboot's PCIe remapping logic returns port index based on index 1. This patch adds variable to pcie_rp_config to pass lcap_port_base to the pcie remapping function, so coreboot can map any n-based LCAP encoding to 0-based indexing scheme. This patch updates correct lcap_port_base variable for all PCIe root ports for all SOCs, so that function returns correct 0-based index from LCAP port number. BUG=b:210933428 BRANCH=None TEST=Check if code compiles for all ADL boards Change-Id: I7f9c3c8e753b982e2ede1a41bf87d6355b82da0f Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25arch/x86: factor out and commonize HPET_BASE_ADDRESS definitionFelix Held
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000, so define this once in arch/x86 and include this wherever needed. The old AMD AGESA code in vendorcode that has its own definition is left unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-02-18drivers/fsp/fsp2_0: Rework FSP Notify Phase API configsSubrata Banik
This patch renames all FSP Notify Phase API configs to primarily remove "SKIP_" prefix. 1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM -> USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM 2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT -> USE_FSP_NOTIFY_PHASE_READY_TO_BOOT 3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE -> USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE The idea here is to let SoC selects all required FSP configs to execute FSP Notify Phase APIs unless SoC deselects those configs to run native coreboot implementation as part of the `.final` ops. For now all SoC that uses FSP APIs have selected all required configs to let FSP to execute Notify Phase APIs. Note: coreboot native implementation to skip FSP notify phase API (post pci enumeration) is still WIP. Additionally, fixed SoC configs inclusion order alphabetically.  BUG=b:211954778 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-15soc/intel/*/pmc: Add `finalize` operation for pmcSubrata Banik
This patch implements the required operations to perform prior to booting to OS using coreboot native driver when platform decides to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware. Additionally, move the PMCON status bit clear operation to `.final` ops to cover any such chances where FSP-S Notify Phase or any other later boot stage may request a global reset and PMCON status bit remains set. BUG=b:211954778 TEST=Able to build brya with these changes. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-05cpu/x86/lapic: Move LAPIC configuration to MP initKyösti Mälkki
Implementation for setup_lapic() did two things -- call enable_lapic() and virtual_wire_mode_init(). In PARALLEL_MP case enable_lapic() was redundant as it was already executed prior to initialize_cpu() call. For the !PARALLEL_MP case enable_lapic() is added to AP CPUs. Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-02soc/intel/jasperlake: Use SBI msg to disable HECI1Subrata Banik
Select HECI_DISABLE_USING_SMM config for Jasper Lake to disable HECI1 device using the SBI msg in SMM. BUG=none TEST=None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3e8568750ec941fc8b8e7407bad027f7175953c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-02soc/intel/common/cse: Rework heci_disable functionSubrata Banik
This patch provides the possible options for SoC users to choose the applicable interface to make HECI1 function disable at pre-boot. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_SBI` config is used for disabling heci1 using non-posted sideband write (inside SMM) after FSP-S sets the postboot_sai attribute. Applicable from CNL PCH onwards. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PMC_IPC` config is used for disabling heci1 using PMC IPC command `0xA9`. Applicable from TGL PCH onwards. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PCR` config is used for disabling heci1 using private configuration register (PCR) write. Applicable for SoC platform prior to CNL PCH. Additionally, add PID_CSME0 macro for SKL, Xeon_SP and APL to fix the compilation failure. Finally, rename heci_disable() function to heci1_disable() to make it more meaningful. BUG=none TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7e0bab0004013b999ec1e054310763427d7b9348 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-19soc/intel/common/cpu: Use SoC overrides to get CPU privilege levelSubrata Banik
This patch implements a SoC overrides to check CPU privilege level as the MSR is not consistent across platforms. For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151. BUG=b:211573253, b:211950520 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I515f0a3548bc5d6250e30f963d46f28f3c1b90b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-14soc/intel/jsl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib9fb554c8f3cfd1e91bbcd1977905e1321db0802 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-10src/soc/intel: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: I2ca3a7487cbe75f9bec458f4166378a07b833bb5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-09soc/intel/{icl,tgl,jsl,ehl}: enable ACPI CPPC entriesMichael Niewöhner
Enable CPPC entries generation, needed for Intel SpeedShift. This can be tested by checking sysfs in Linux: $ grep . /sys/devices/system/cpu/cpu?/acpi_cppc/*perf The output should look like this, while the values may differ: /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf:28 /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_nonlinear_perf:5 /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_perf:1 /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_perf:24 /sys/devices/system/cpu/cpu1/acpi_cppc/highest_perf:28 /sys/devices/system/cpu/cpu1/acpi_cppc/lowest_nonlinear_perf:5 ... Change-Id: I910b4e17d4044f1bf1ecfa0643ac62fc7a8cb51b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
2022-01-05soc/intel: Remove unused <string.h>Elyes HAOUAS
Found using following command: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/) Change-Id: Iae90ff482f534d8de2a519619c20a019d054e700 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-01src: Drop duplicated includesElyes HAOUAS
<types.h> already provides <commonlib/bsd/cb_err.h>, <limits.h>, <stdbool.h>, <stdint.h> and <stddef.h> headers. Change-Id: I700b3f0e864ecce3f8b3b66f3bf6c8f1040acee1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-01soc/intel/jasperlake: Add CdClock frequency configSimon Yang
Add a devicetree setting to configure the CdClock (Core Display Clock) frequency through a FSP UPD. Because the value for this UPD's default setting is non-zero and devicetree settings default to 0 if not set, adapt the devicetree values so that the value for the UPD's default setting is used when the devicetree setting is zero. Also update the comment describing the FSP UPD in the header file FspsUpd.h to match the correct CdClock definition. BUG=b:206557434 BRANCH=dedede TEST=Build fw and confirm FSP setting are set properly by log Signed-off-by: Simon Yang <simon1.yang@intel.com> Change-Id: I917c2f10b130b0cd54f60e2ba98eb971d5ec3c97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-12soc/intel/jasperlake: Hook up public microcodeArthur Heymans
Change-Id: I9e511de5e5b79936ed09538b3877655f78de15a9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-08soc/intel: drop Kconfig `PM_ACPI_TIMER_OPTIONAL`Michael Niewöhner
Technically, it's not depending on the hardware but on the software (OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A support disabling of the PM Timer, when the respective FADT flag is unset. Thus, drop this guard. For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`. As of this change, new platforms must either implement code for disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such is present. Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-11-04soc/intel: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I2a57ea1c2f5b156afd0724829e5b1880246f351f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel: Constify `soc_get_cstate_map()`Angel Pons
Return a read-only pointer from the `soc_get_cstate_map()` function. Also, constify the actual data where applicable. Change-Id: I7d46f1e373971c789eaf1eb582e9aa2d3f661785 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19soc/intel/*/acpi.c: Don't copy structs with `memcpy()`Angel Pons
A regular assignment works just as well and also allows type-checking. Change-Id: Id772771f000ba3bad5d4af05f5651c0f0ee43d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-17soc/intel: transition full control over PM Timer from FSP to corebootMichael Niewöhner
Set `EnableTcoTimer=1` in order to keep FSP from 1) enabling ACPI Timer emulation in uCode. 2) disabling the PM ACPI Timer. Both actions are now done in coreboot. `EnableTcoTimer=1` makes FSP skip these steps in any possible case including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP Multiphase Init. This way full control is left to coreboot. Change-Id: I8005daed732c031980ccc379375ff5b09df8dac1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-17soc/intel: implement ACPI timer disabling per SoC and drop common codeMichael Niewöhner
Since it's just a one-liner, implement disabling of the ACPI timer in soc code. This reduces complexity. Change-Id: I434ea87d00f6e919983d9229f79d4adb352fbf27 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: move disabling of PM Timer to SoC PMC codeMichael Niewöhner
Move disabling of PM Timer to SoC PMC code. The original reason for placing that in `finalize` [1] was FSP hanging due to use of the PM timer without enabling timer emulation first in coreboot, which was added later [2]. [1] commit 6c1bf27dae (intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdown) [2] commit f004f66ca7 (soc/intel/skylake: Enable ACPI PM timer emulation on all CPUs) Change-Id: I354c3aea0c8c1f8ff3d698e0636932b7b76125f7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: deduplicate acpi_fill_soc_wakeMichael Niewöhner
The PM1_EN bits WAK_STS, RTC_EN, PWRBTN_EN don't need any SoC-specific handling. Deduplicate `acpi_fill_soc_wake` by setting these bits in common code. Change-Id: I06628aeb5b82b30142a383b87c82a1e22a073ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-12soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner
Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-12soc/intel/*/cpu.c: Add missing space in commentAngel Pons
Add a space before the `*/` C-style comment ending. Change-Id: Ic8928286c8237808b9e380e4393078792589615d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29soc/intel: Drop unnecessary `select REG_SCRIPT`Angel Pons
These platforms no longer use reg-script. Drop unneeded select. Change-Id: I8fc4dc29d25dffbf9ed1947d0ff013b2fae0faaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/{cnl,jsl,tgl,ehl,adl}: rename PMC device init/enable callbacksMichael Niewöhner
The current names of the PMC init/enable callbacks are very confusing. Rename them. Change-Id: I69f54f3b4e1ea9a9b4fa5c8dd9c0d454d7cd1283 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-23soc/intel/{xeon-sp,icl,tgl,jsl,ehl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so NMI interrupts can be used. References: - XEON-SP: Intel doc# 633935-005 and 547817 rev1.5 - ICL-LP: Intel doc# 341081-002 - TGL-LP: Intel doc# 631120-001 - TGL-H: Intel doc# 636174-002 - JSL: Intel doc# 634545-001 - EHL: Intel doc# 636722-002 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I2621f4495dfd4f95f9774d9081e44c604de830a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-09-23mb/google/dedede: Migrate dedede to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all dedede variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for cret: util/spd_tools/bin/part_id_gen \ JSL \ lp4x \ src/mainboard/google/dedede/variants/cret/memory \ src/mainboard/google/dedede/variants/cret/memory/mem_parts_used.txt For cappy, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/dedede -a -x --timeless Change-Id: I2871ff45d6202520d4466b68a4d5bb283faf2b63 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-20soc/intel/jasperlake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: Idfaa9a24f7b7fefa4f63ab8e3bc4ee6a0f1faedf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-17soc/intel/{ehl,jsl}: make use of Kconfig options for PRMRR sizeMichael Niewöhner
Migrate the last two platforms to using Kconfig through `get_valid_prmrr_size()` instead of hardcoded values in the devicetree. Change-Id: I93aa177f741ca8b2a2d50fae2515606b96784e83 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16drivers/intel/fsp2_0: Refactor MultiPhaseSiInit API calling methodSubrata Banik
FspMultiPhaseSiInit API was introduced with FSP 2.2 specification onwards. EnableMultiPhaseSiliconInit is an arch UPD also introduced as part of FSP 2.2 specification to allow calling FspMultiPhaseSiInit API. However, some platforms adhere to the FSP specification but don't have arch UPD structure, for example : JSL, TGL and Xeon-SP. Out of these platforms, TGL supports calling of FspMultiPhaseSiInit API and considered EnableMultiPhaseSiliconInit as a platform-specific UPD rather than an arch UPD to allow calling into FspMultiPhaseSiInit API. It is important to ensure that the UPD setting and the callback for MultiPhaseInit are kept in sync, else it could result in broken behavior e.g. a hang is seen in FSP if EnableMultiPhaseSiliconInit UPD is set to 1 but the FspMultiPhaseSiInit API call is skipped. This patch provides an option for users to choose to bypass calling into MultiPhaseSiInit API and ensures the EnableMultiPhaseSiliconInit UPD is set to its default state as `disable` so that FSP-S don't consider MultiPhaseSiInit API is a mandatory entry point prior to calling other FSP API entry points. List of changes: 1. Add `FSPS_HAS_ARCH_UPD` Kconfig for SoC to select if `FSPS_ARCH_UPD` structure is part of `FSPS_UPD` structure. 2. Drop `soc_fsp_multi_phase_init_is_enable()` from JSL and Xeon-SP SoCs, a SoC override to callout that SoC doesn't support calling MultiPhase Si Init is no longer required. 3. Add `FSPS_USE_MULTI_PHASE_INIT` Kconfig for SoC to specify if SoC users want to enable `EnableMultiPhaseSiliconInit` arch UPD (using `fsp_fill_common_arch_params()`) and execute FspMultiPhaseSiInit() API. 4. Presently selects `FSPS_USE_MULTI_PHASE_INIT` from IA TCSS common code. 5. Add `fsp_is_multi_phase_init_enabled()` that check applicability of MultiPhase Si Init prior calling FspMultiPhaseSiInit() API to honor SoC users' decision. 6. Drop `arch_silicon_init_params()` from SoC as FSP driver (FSP 2.2) would check the applicability of MultiPhase Si Init prior calling FspMultiPhaseSiInit() API. Additionally, selects FSPS_HAS_ARCH_UPD for Alder Lake as Alder Lake FSPS_UPD structure has `FSPS_ARCH_UPD` structure and drops `arch_silicon_init_params()` from SoC `platform_fsp_silicon_init_params_cb()`. Skip EnableMultiPhaseSiliconInit hardcoding for Tiger Lake and uses the fsp_is_multi_phase_init_enabled() function to override EnableMultiPhaseSiliconInit UPD prior calling MultiPhaseSiInit FSP API. TEST=EnableMultiPhaseSiliconInit UPD is getting set or reset based on SoC user selects FSPS_USE_MULTI_PHASE_INIT Kconfig. Change-Id: I019fa8364605f5061d56e2d80b20e1a91857c423 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-14src/soc/intel/jasperlake/spd: Update SPDsTyler Wang
Due to CL:55000 modified MT53E1G32D2NP-046 WT:B settings and CL:56597 add new memory in global_lp4x_mem_parts.json.txt, update SPDs using gen_spd.go for JSL: Modify: 1.MT53E1G32D2NP-046 WT:B(lp4x-spd-5.hex --> lp4x-spd-3.hex) Add: 1.H54G46CYRBX267,lp4x-spd-1.hex 2.H54G56CYRBX247,lp4x-spd-3.hex 3.K4U6E3S4AB-MGCL,lp4x-spd-1.hex 4.K4UBE3D4AB-MGCL,lp4x-spd-3.hex BUG=b:199032134 TEST=emerge-dedede coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I45b9275403fc4166fc56ae4c368c7a222141e150 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-10soc/intel/jasperlake: Switch to runtime generation of Intel Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch jasperlake boards to this method. soc/intel/jasperlake: Switch to acpigen PEPD Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib7f17f9b3b1396708ba68fa7a6d199d6e8b0ba11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05soc/intel/jasperlake: Utilize vbt data size Kconfig optionSeunghwan Kim
Currently maximum VBT data size for Jasper Lake is 8KB, but Bugzzy would use VBT data over 8KB. This change makes use of Kconfig option to increase the maximum VBT data size to 9KB for Jasper Lake. BUG=b:194029827 BRANCH=dedede TEST=build and boot bugzzy and verify fw screen is loaded Change-Id: I0abe1ba5609b48a8a8b15f88bec28342ce26c78f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57201 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05soc/intel/jasperlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: I10f859f30b260d012f0bc8755f32413d8b2cf267 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-12soc/intel/jasperlake: Clean up FSP chipset lockdown configurationFelix Singer
Use a variable to store if the FSP should be responsible for the chipset lockdown and use it for setting related configuration options. Thus, get rid of that if-else-clause. Change-Id: I367554053f78b760ece6d59f79ce1f0e0f9fdfc6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-04Move post_codes.h to commonlib/console/Ricardo Quesada
Move post_codes.h from include/console to commonlib/include/commonlib/console. This is because post_codes.h is needed by code from util/ (util/ code in different commit). Also, it sorts the #include statements in the files that were modified. BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: Ie48c4b1d01474237d007c47832613cf1d4a86ae1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56403 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03soc/intel/*: Allow configuring 8254 timer via CMOSSean Rhodes
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer` CMOS option to allow enabling and disabling the 8254 timer without having to rebuild and reflash coreboot. If options are not enabled or the option is missing in cmos.layout, the Kconfig setting is used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic82c7f25cdf6587de5c40f59441579cfc92ff2f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-28Revert "soc/intel/jasperlake: Enable support to program VCCIO selection"Karthikeyan Ramasubramanian
This reverts commit 16f2c5082c92ceb4defc252819aaeca96d801543. Change-Id: Id0f960fdeca5895afc22809ff3f0236d6dbe82f4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56614 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-28soc/intel/jsl: Add disable_external_bypass_vr configSimon Yang
This dev tree config controls the Vnn/Vcc1P05 bypass mode for Jasperlake. BUG=b:191691430 BRANCH=dedede TEST=Build fw and confirm FSP setting are set properly by log Signed-off-by: Simon Yang <simon1.yang@intel.com> Change-Id: I10bc203d3fed32ab65f325978426b7d0fca6f392 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-28soc/intel/jasperlake: add pcie modphy settingsJamie Chen
This patch adds device tree settings to control pcie modphy tuning FSP UPDs. With this patch, the pcie modphy can be tuned per board. BUG=b:192716633 BRANCH=NONE TEST=build dedede variant coreboot with fw_debug enable and check if these settings have been changed successfully on fsp debug log. Change-Id: I80a91d45f9dd8ef218846e1284fdad309313e831 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Enable support to program VCCIO selectionKarthikeyan Ramasubramanian
Jasperlake is one of the few SoCs that support programmable VCCIO selection and this support is used by Dedede mainboard. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: I54def27a499ccba7fd25cab1048fdca06dbc535f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56536 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Set xHCI LFPS period sampling off timeBen Kao
Provide an option to set xHCI LFPS period sampling off time (SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0). If the option is set in the devicetree, the bits[7:4] in xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated. The host will sample LFPS for U3 wake-up detection when suspended, but it doesn't sample LFPS at all time due to power management, the default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS period sampling off time is not 0ms, the host may miss the device-initiated U3 wake-up and causes some kind of race condition for U3 wake-up between the host and the device. BUG=b:187801363, b:191426542 TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash the image to the device. Run following command to check the bits[7:4]: iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Ben Kao <ben.kao@intel.com> Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-17soc/intel/jasperlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: Iefc19bc81125f422b8d4fc2f4af60622e7d28c0f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-02src: Introduce `ARCH_ALL_STAGES_X86`Angel Pons
Introduce the `ARCH_ALL_STAGES_X86` Kconfig symbol to automatically select the per-stage arch options. Subsequent commits will leverage this to allow choosing between 32-bit and 64-bit coreboot where all stages are x86. AMD Picasso and AMD Cezanne are the only exceptions to this rule: they disable `ARCH_ALL_STAGES_X86` and explicitly set the per-stage arch options accordingly. Change-Id: Ia2ddbae8c0dfb5301352d725032f6ebd370428c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-07-01soc/intel: Refactor `xdci_can_enable()` functionAngel Pons
The same pattern appears on all `xdci_can_enable()` call sites. Move the logic inside the function and take the xDCI devfn as parameter. Change-Id: I94c24c10c7fc7c5b4938cffca17bdfb853c7bd59 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30soc/intel/jasperlake: Send End-of-Post message to CSETim Wawrzynczak
This is done to ensure the CSE will not execute any pre-boot commands after it receives this command. Verified EOP and error recovery sequence from Intel doc#619830. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I36fe448ff279ba054ad5e79e71c995dc915db21e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55633 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-30src: Move `select ARCH_X86` to platformsAngel Pons
To generalise the choice of 32-bit or 64-bit coreboot on x86 hardware, have platforms select `ARCH_X86` directly instead of through per-stage Kconfig options, effectively reversing the dependency order. Change-Id: If15436817ba664398055e9efc6c7c656de3bf3e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-28soc/intel: Drop casts around `soc_read_pmc_base()`Angel Pons
The `soc_read_pmc_base()` function returns an `uintptr_t`, which is then casted to a pointer type for use with `read32()` and/or `write32()`. But since commit b324df6a540d154cc9267c0398654f9142aae052 (arch/x86: Provide readXp/writeXp helpers in arch/mmio.h), the `read32p()` and `write32p()` functions live in `arch/mmio.h`. These functions use the `uintptr_t type for the address parameter instead of a pointer type, and using them with the `soc_read_pmc_base()` function allows dropping the casts to pointer. Change-Id: Iaf16e6f23d139e6f79360d9a29576406b7b15b07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-26soc/intel/jasperlake: Select DISPLAY_FSP_VERSION_INFO_2Ronak Kanabar
Select DISPLAY_FSP_VERSION_INFO_2 for Jasper Lake soc. BUG=b:153038236 BRANCH=None TEST=Verify JSLRVP build with all the patch in relation chain and verify the version output prints no junk data observed. couple of lines from logs are as below. Display FSP Version Info HOB Reference Code - CPU = 8.7.16.10 uCode Version = 0.0.0.1 Change-Id: If68b704c4304357b0046a510545fc213d7ed5887 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45907 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-23soc/intel/jasperlake: Use devfn_disable() function for XDCISubrata Banik
Use devfn_disable() for disabling a PCI device rather than using `dev->enabled = 0`. Also, use is_devfn_enabled() to get the device current state prior updating the FSP-S UPD for XDCI. TEST=FSP-S disabled XDCI when `xdci_can_enable` returns 0 and XDCI is disabled at PCI enumeration `PCI: 00:14.1: enabled 0`. Change-Id: I038e43deead70d598cf26f320dd9993f17591b88 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55723 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-19soc/intel/jasperlake: Add offsets for pad lockingAseda Aboagye
This commit simply adds the offset for the PADCFGLOCK register for the Intel Jasper Lake platform. This enables pads to be locked. BUG=b:191189275 BRANCH=None TEST=Enable pad locking on lalala by calling `gpio_lock_pad` and verify that the pad configuration is locked and cannot be manipulated from the OS. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Iccfe536b4a881f081f22bcc258a375caad3ffcb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55648 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/intel/jasperlake: Make use of FSP_ARRAY_LOAD macroLean Sheng Tan
Add FSP_ARRAY_LOAD macro for checking and loading array type configs into array type UPDs to increase readability. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ia20cabcaf9724882c68633eb9b510230e993768c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-16soc/intel/jasperlake: Make use of is_devfn_enabled() functionSubrata Banik
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions combination with is_devfn_enabled(). 2. Remove unused local variable of device structure type (struct device *). 3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled() call. TEST=Able to build and boot without any regression seen on dedede Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I4919a1ec02df50bc41fd66d5f3a352108a7aa04c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-07cpu/x86: Default to PARALLEL_MP selectedKyösti Mälkki
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-07soc/intel: Drop unused lpss functionsFurquan Shaikh
This change drops the following unused lpss functions and related code: * soc_lpss_controllers_list * is_dev_lpss These functions were added to determine if a controller is LPSS for performing IRQ configuration. But, these never got used and hence are being dropped. Change-Id: I27bdfbca7c199e823a0e4fdb277e3f22fb6bae7a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-22util/spd_tools/lp4x: Add new memory part to to global memory definitionDtrain Hsu
This new definition is for MT53E512M32D1NP-046 WT:B used on Cret. BUG=b:183057749 TEST=Generate SPDs Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ica5df61d96d2c4cbe62a560a53bd3bd08eb121f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13src: Match array format in function declarations and definitionsPatrick Georgi
gcc 11.1 complains when we're passing a type* into a function that was declared to get a type[], even if the ABI has identical parameter passing for both. To prepare for newer compilers, adapt to this added constraint. Change-Id: I5a1b3824a85a178431177620c4c0d5fddc993b4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-07soc/intel/{adl,tgl,jsl}: Enable power button smi after BS_CHIPS_EXITKane Chen
On tgl, we noticed system hang if a shutdown is triggered before fsps. The dut is unable to shutdown properly due to tcss is stuck before tcss_init in fsps. This change enable power button smi on jsl, tgl, adl after fsps. it can also prevent a shutdown failure due to lack of fsps init on certain ip. BUG=b:186194102, b:186815114 TEST=Power on the system and pressing power button repeatedly doesn't cause the system hang during shutdown. Change-Id: I70b871f2676a89bc782116e02beba5c20ec51eef Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-07soc/intel/{adl,tgl,jsl}: Add smihandler_soc_disable_busmasterKane Chen
If a power button SMI is triggered between where it is currently enabled and before FSP-S exits, when the SMI handler disables bus mastering for all devices, it inadvertently also disables the PMC's I/O decoding, so the register write to actually go into S5 does not succeed, and the system hangs. This can be solved by skipping the PMC when disabling bus mastering in the SMI handler, for which a callback, smihandler_soc_disable_busmaster is provided. BUG=b:186194102, b:186815114 TEST=Power on the system and pressing power button repeatedly doesn't cause the system hang during shutdown. Change-Id: I1cf5cf91ebad4a49df6679e01fc88ff60c81526c Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-03soc/intel/*: Update data types for variables holding PCH_DEVFN_* macrosTim Wawrzynczak
The usage of `pci_devfn_t` here is misleading, as these intentionally store the `PCH_DEVFN_*` macros so they can be used across `smm` and `ramstage` without requiring the device model. Update to `unsigned int` instead, as `pci_devfn_t` implies the data is an MMCONF-compatible PCI devfn offset. Change-Id: Ic8880de984e6eceda4cbe141e118f3a5fdd672a2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52808 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03device: Switch pci_dev_is_wake_source to take pci_devfn_tTim Wawrzynczak
With the recent switch to SMM module loader v2, the size of the SMM for module google/volteer increased to above 64K in size, and thus failed to install the permanent SMM handler. Turns out, the devicetree is all pulled into the SMM build because of elog, which calls `pci_dev_is_wake_source`, and is the only user of `struct device` in SMM. Changing this function to take a pci_devfn_t instead allows the linker to remove almost the entire devicetree from SMM (only usage left is when disabling HECI via SMM). BUG=b:186661594 TEST=Verify loaded program size of `smm.elf` for google/volteer is almost ~50% smaller. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 07:23:25 +0000