summaryrefslogtreecommitdiff
path: root/src/soc/intel/fsp_baytrail
AgeCommit message (Collapse)Author
2016-03-07intel/fsp_baytrail: use 20K PU/PD for GPIOBen Gardner
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs. The 10K and 40K values map to 'reserved'. This brings the code closer to the non-FSP baytrail. Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/13907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-25fsp_baytrail: Fix a possible hanging DisplayPortWerner Zeh
On some devices it can happen that DisplayPort TX lanes do not work properly if the power gate setup is omitted. If that happens, DisplayPort training will fail and therefore DisplayPort channel will not work. Both ports are affected. It seems that not every CPU shows this effect and those that are affected tend to fail more often in a cold environment. With this fix a board that originally shows this failure was running for over 1000 power cycles without issues. Change-Id: Ia266674490a1bee63a85b38d1dc949dcdf683cbc Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13743 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-22fsp_baytrail: Add full support for iosf access in reg_scriptWerner Zeh
Add all needed functions to fsp_baytrail so that reg_script can do full iosf access. To keep it simple, this patch synchronises iosf access between baytrail and fsp_baytrail. Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
Baytrail FSP MR 005 adds two new fields: AutoSelfRefreshEnable APTaskTimeoutCnt Add the device tree definitions. Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12973 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-08fsp_baytrail: Add additional PCI space above 4GBMartin Roth
This just tells the OS that it can use the 16GB of address space at the 48GB mark for PCI. This is the upper 16GB of Bay Trail's 36 bit physical address space. This could be hardcoded into the UMEM definition, but doing it this way makes it more plain what it's doing, and allows for modification to put it just above the top of upper memory, similar to what is done with the standard PCI region above the top of low memory. Change-Id: Id6208c3712e5d94d62a83c4ac69e8ffd0e19f4ad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12791 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: York Yang <york.yang@intel.com>
2015-12-22soc/intel/fsp_baytrail: Make sure i2c bus is < 7Martin Roth
Baytrail has I2c Busses 0 to 6, so is supposed to error out if the I2c driver is called with 7 or greater. Due to an off-by-one error it could be called with bus 7. Fixes coverity warning: CID 1287074 (#1 of 1): Out-of-bounds read (OVERRUN) 3. overrun-local: Overrunning array base_adr of 7 4-byte elements at element index 7 (byte offset 28) using index bus (which evaluates to 7). Change-Id: I7caec60298cf27bd669796e0e05e4a896f92befd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12781 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-17soc/intel/fsp_baytrail: Adjust root port INT routingMartin Roth
Adjust the root port INT routing based on Bay Trail spec: Document Number: 538136, Rev. 3.9 Table 241. Interrupt Generated for INT[A-D] Interrupts INTA INTB INTC INTD Root Port 1 INTA# INTB# INTC# INTD# Root Port 2 INTD# INTA# INTB# INTC# Root Port 3 INTC# INTD# INTA# INTB# Root Port 4 INTB# INTC# INTD# INTA# Change-Id: I22a8c0bc6ad731dfb79385d6e165f1ec0a07507d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12684 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2015-12-16intel/fsp_baytrail: change indent to use tabsBen Gardner
Change-Id: If0d0a15442738bab0e34f1b05513e7f8e8fa9afc Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-16intel/fsp_baytrail: rename include folder baytrail to include/socBen Gardner
This is to match the layout of the non-fsp baytrail to make comparisons easier and possibly remove duplicate files. Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12686 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-16intel/fsp_baytrail: Fix PCI_DEV_PIRQ_ROUTE macro endingBen Gardner
The macro PCI_DEV_PIRQ_ROUTE ends with a comma and escaped newline. Ending a macro with an escaped newline is always wrong. The final comma is not necessary, as all uses of PCI_DEV_PIRQ_ROUTE() properly separate calls with a comma. I haven't investigated whether this is causing a real issue, but it should be leaving gaps in struct baytrail_irq_route.pcidev. The non-FSP baytrail does not have this issue. Change-Id: If6782176068b07cb3bc819c00d1cdb1b618bcea8 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10intel/fsp_baytrail: Remove code for nonexistant BBARBen Gardner
The BBAR register (BIOS Base Address Configuration Register) defined in the ICH9 datasheet does not exist in the Bay Trail E3800 datasheet. Accessing it seems harmless, but should likely be avoided. Change-Id: I5d9a6a1ccead84c8996796f516a2bdc5f248cfef Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-06fsp_baytrail: Add missing newline to eMMC Mode logBen Gardner
Change-Id: Icd697053c2ea1a2ac42bdd045134d223d93d5403 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12623 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-30fsp_baytrail: Remove use of BAYTRAIL_SMM Kconfig symbolMartin Roth
The symbol BAYTRAIL_SMM was never valid (there's no config statment initializing the symbol), but it was being selected and used in the code. Now that SMM is supported in fsp_baytrail, the code it was trying to switch can be removed, and just set up for SMM. Change-Id: I0fd4865a951734e728500e7baf593ff7eb556f73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12553 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2015-11-21baytrail: add C0 and D0 stepping decodeBen Gardner
The E3800 with ordering code FH8065301487717 is stepping D0, value 0x11. Add that so the debug log shows 'D0' instead of '??'. Also, add the C0 stepping decode to fsp_baytrail. Change-Id: Ibec764fcf5d3f448e38831786a071f5ab6066d67 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: http://review.coreboot.org/12488 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-20fsp1_0: Remove hardcoded microcode locationsMartin Roth
These are no longer needed. Test: Booted minnowmax. Change-Id: Ie77040f3506464c614760bd4d30280c8113373bd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12468 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-17fsp_baytrail: use external microcode .h filesMartin Roth
The microcode for Bay Trail that's in the blobs repo is for the M and D chip variants only. The fsp_baytrail directory is for Bay Trail I chip variants, and will not boot if the M/D microcode is used. The microcode for the I variant is supplied as part of the Bay Trail FSP package. Change-Id: I5493deb1626dc3cf037053e13e092f5a1143a13a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-16intel/fsp_baytrail: Load APs microcode in baytrail_init_cpusYork Yang
Load microcode to APs when performing baytrail_init_cpus. The updated fsp1_0 driver calls TempRamInit API with a dummy microcode, so FSP will not handle the microcode load. Change-Id: I7b7c0f43da0d149048ae5a8fd547828f42de04fd Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/12095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-16intel/fsp_baytrail: Load BSP microcode in bootblockYork Yang
Load microcode to BSP in bootblock so later on the FSP TempRamInit call can be success. The updated fsp1_0 driver calls TempRamInit API with a dummy microcode, so FSP will not handle the microcode load. If BSP is not loaded a microcode before calling TempRamInit API, the call will fail with the error No Valid Microcode Was Found. Change-Id: I1fbe68e14e5a24d8f2da70603cd2f03675b9ca81 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/11896 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
Up to now the GPIO set up macros for input sets up GPIOs to be mapped to memory space while macros for outputs sets up GPIOs to be mapped to legacy io space. This patch adds two additional macros for legacy output definition and changes the old macros to memory space mapping. In addition, the intel/minnowmax mainboard is modified to use the legacy macros for outputs to ensure this mainboard stays unchanged in terms of functionality. TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux. Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12340 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-09fsp_baytrail: Add functions to set a GPIOWerner Zeh
Add two functions to set a memory mapped GPIO to a given value. TEST=Booted siemens/mc_tcu3 board and confirmed GPIO-value after using this functions. Change-Id: Idc14c5d4049487e60040cc294ba0cea363d998a6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP configuration option. TEST=Built and booted on Minnowboard Max Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR, we also remove the _MSR suffix, as they are, by definition, MSRs. Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-01intel/fsp_baytrail: Remove unused MICROCODE_INCLUDE_PATH from KconfigWerner Zeh
Since fsp_baytrail was refactored to use microcode.bin in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more. Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/11762 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
Using a copiler to compile something that's already a binary is pretty stupid. Now that Stefan converted most microcode in blobs to a plain binary, use the binary version. Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11607 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-21intel/fsp_baytrail: Support Baytrail FSP Gold4 releaseYork Yang
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION structure to include these new PCD options and initialized the setting when given in devicetree.cb. Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/10838 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-17soc/intel: Remove microcode terminatorsStefan Reinauer
They have been removed in the rest of the code already. http://review.coreboot.org/#/c/4506/ Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10964 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24Kconfig: Get rid of obsolete symbolsMartin Roth
CAR_MIGRATION was removed in commit: cbf5bdfe - CBMEM: Always select CAR_MIGRATION ALT_CBFS_LOAD_PAYLOAD was removed in commit: cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD MARK_GRAPHICS_MEM_WRCOMB was removed in commit: 30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB. EXTERNAL_MRC_BLOB was removed in commit: 0aede118 - Drop unused EXTERNAL_MRC_BLOB CACHE_ROM is only in Google's codebase. LID_SWITCH is only in Google's codebase. DEFAULT_POST_DEVICE_LPC is only in Sage's codebase. ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used. HUDSON_NOT_LEGACY_FREE never existed as far as I can tell. MAINBOARD_DO_EDID never existed as far as I can tell. Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10616 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
The CBFS size is really mainboard specific, since it really depends on size of the chip on the mainboard, so it makes sense to have it in the mainboard menu along with the ROM-chip size. - Move the CBFS_SIZE definition up in src/kconfig - Move the Mainboard Menu markers out of src/mainboard/kconfig into src/Kconfig so CBFS_SIZE can live in the mainboard menu. - Add a long list setting default values to do what the chipset directories were previously defaulting the values to. This will be trimmed down in a following patch that creates a common set of IFD routines. (Who knew that kconfig supported line wrapping?) - Update the help text. Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10610 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG Remove some newly dead code while on it. Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10355 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-26acpigen: Remove all explicit length trackingVladimir Serbinenko
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7367 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I6a1b1daa291298c85e14f89aa47a0693837cec6f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7037 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-04intel/fsp_baytrail: Fix SPI debuggingDavid Imhoff
Fix compiler error's due to type mismatch. This is broken since commit bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer). TEST=Build with CONFIG_DEBUG_SPI_FLASH=y and booted on Minnowboard Max Change-Id: Id3d448e219716135897f381a73d416ff34036118 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10075 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
Several of the intel platforms define the region reserved for PCI memory resources in a location where it overlaps with the MMIO (MCFG) region. Using the memory map from mohon_peak as an example: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-000000007fbcffff: RAM 4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES 5. 000000007fc00000-000000007fdfffff: RESERVED 6. 00000000e0000000-00000000efffffff: RESERVED 7. 00000000fee00000-00000000fee00fff: RESERVED 8. 0000000100000000-000000017fffffff: RAM The ACPI table describing the space set aside for PCI memory (not to be confused with the MMIO config space) is defined as the region from BMBOUND (the top of DRAM below 4GB) to a hardcoded value of 0xfebfffff. That region would overlap the MMIO region at 0xe0000000-0xefffffff. For rangeley the upper bound of the PCI memory space should be set to 0xe0000000 - 1. The MCFG regions for several of the affected chipsets are: rangeley 0xe0000000-0xefffffff baytrail 0xe0000000-0xefffffff haswell 0xf0000000-0xf3ffffff sandybridge 0xf8000000-0xfbffffff TEST = intel/mohonpeak and intel/bayleybay. Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/9972 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-04-29kbuild: automatically include SOCsStefan Reinauer
This change switches all SOC vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in soc/Makefile.inc or in soc/<vendor>/Makefile.inc. This means, vendor and SOC directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9799 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-28fsp platforms: consolidate FspNotify callsMartin Roth
Consolidate the FspNotify calls into the FSP driver directory, using BOOT_STATE_INIT_ENTRY to set up the call times. Change-Id: I184ab234ebb9dcdeb8eece1537c12d03f227c25e Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/9780 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-27intel/fsp_baytrail: Fix default SMM_TSEG_SIZE valueDavid Imhoff
The value of SMM_TSEG_SIZE was equal to SMM_RESERVED_SIZE. This caused the install_permanent_handler() function to fail. Changed the value to 0x800000, which is already used as default in smm_region_size() in case SMM_TSEG_SIZE is 0. Change-Id: I4ff3568aefd4729a98c1777a2cae2a4715afbc2f Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/9961 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-04-24fsp: Move fsp to fsp1_0Marc Jones
Prepare for FSP 1.1 integration by moving the FSP to a FSP 1.0 specific directory. See follow-on patches for sharing of common code. Change-Id: Ic58cb4074c65b91d119909132a012876d7ee7b74 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/9970 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-04build system: rename __BOOT_BLOCK__ and __VER_STAGE__Patrick Georgi
Drop the inner underscore for consistency. Follows the commit stated below. Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06 Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172 Reviewed-on: http://review.coreboot.org/9290 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-03-12intel/fsp_baytrail: Add PCI Root Port IRQ RoutingMartin Roth
This change generates the ASL tables needed for the PCIe bridge routing. It generates this ASL (swizzled for each of the 8 functions) Name(RP1P, Package() { Package() {0x0000ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, Package() {0x0000ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, Package() {0x0000ffff, 2, \_SB.PCI0.LPCB.LNKG, 0 }, Package() {0x0000ffff, 3, \_SB.PCI0.LPCB.LNKH, 0 }, }) Name(RP1A, Package() { Package() {0x0000ffff, 0, 0, 20 }, Package() {0x0000ffff, 1, 0, 21 }, Package() {0x0000ffff, 2, 0, 22 }, Package() {0x0000ffff, 3, 0, 23 }, }) Device(RP01) { Name(_ADR, 0x1c0001) Name(_PRW, Package() { 0, 0 }) Method(_PRT,0) { If(PICM) { Return (RP1A) } Else { Return (RP1P) } } } Change-Id: Id51261c11f8457fe2150f2b646aafc4fe1ffec30 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8429 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-10ACPI: Get S3 resume state from romstage_handoffKyösti Mälkki
There is nothing platform specific in retrieving S3 resume state from romstage_handoff structure. Boards without EARLY_CBMEM_INIT update acpi_slp_type from ACPI power-management block or scratchpad registers. Change-Id: Ifc3755f891a0810473b3216c1fec8e45908fc1ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8188 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-09coreboot: fix munged license textAaron Durbin
At some point the license text for a file was incorrectly changed. That license was then copied and pasted. I'm sure it was myself. Anyhow, fix the bustedness. Change-Id: I276083d40ea03782e11da7b7518eb708a08ff7cd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8620 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-03-05fsp_baytrail: Add I2C driverWerner Zeh
Add a driver wich can handle the internal I2C controllers of Baytrail SoC. This driver is not suitable for the SMBus controller. Change-Id: I841c3991a2fb0f8b92b8e59ec02d62f5866f5bdf Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8401 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-05fsp_baytrail: Add new microcode for Bay Trail MWerner Zeh
Add a new microcode for Bay Trail M D0 stepping used in cpu N2807 silicon. In addition, a selection of the used CPU type has been added (I or M/D) which allows to use only the really needed microcode for a given CPU type. Change-Id: I373fc9b535f1dc97eaa9f76ae46f0b69b247a8a0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8399 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-27x86: Fix pointer arithmetic regressions from MMIO changesKevin Paul Herbert
During the development of commit bde6d30 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer), there were several iterations and patterns tried. An intermediate pattern was the use of u32 pointers, and division by sizeof(u32). Some of these did not get properly changed to pointer types of length 1, causing a regression in the Intel Ibex Peak SATA driver, fixed in commit 9b5f137 (Intel ibexpeak: Fix SATA configuration). Other regressions of this pattern are fixed here. I audited all changes to u32 types, and the other ones are safe. Change-Id: I9e73ac8f4329df8bf0cdd1a14759f0280f974052 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Reviewed-on: http://review.coreboot.org/8530 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-24soc/fsp_baytrail: Fix use of microcode-related Kconfig variablesAlexandru Gagniuc
SUPPORT_CPU_UCODE_IN_CBFS is a deprecated option now that all CPUs with updateable microcode (except AGESA) load microcode from CBFS. CPU_MICROCODE_ADDED_DURING_BUILD is a state variable that is set based on user's choice in the microcode menu and should not be changed directly. Eliminate INCLUDE_MICROCODE_IN_BUILD variable, whose use directly interferes with the microcode mechanism, remove selection of CPU_MICROCODE_ADDED_DURING_BUILD, and do not depend SUPPORT_CPU_UCODE_IN_CBFS on anything. This makes usage of the microcode mechanism consistent with other CPUs in the tree. This incorrect usage of the Kconfig variables was hiding the fact that some of the microcode files present in fsp_baytrail/microcode_blob.c were not present in the tree. Change-Id: I71cb3f834c22c0363a20bd469797a9f51c215371 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8484 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-13fsp_baytrail: Add macros to define 20K pull-up and downWerner Zeh
Add two macros to gpio.h which allow to setup 20K pull-up or pull-down resistor for a given GPIO. Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8402 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-10Baytrail_fsp: Make ME path configurable in menuconfigWerner Zeh
By adding a description to ME_PATH it becomes visible and editable in menuconfig. Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8398 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-09fsp_baytrail: Get FSP reserved memory from the FSP HOB listMartin Roth
Because the pointer to the FSP HOB list is now being saved, we can use that to find the top of usable memory. This eliminates the need to hardcode the size of the FSP reserved memory area. Tested on minnowboard max for baytrail. The HOB structure used does not seem to be present for the rangeley or ivybridge/pantherpoint FSPs. At the very least, the GUID is not documented in the integration guides. Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8308 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-09Intel FSP platforms: Fix timestampsKyösti Mälkki
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR. Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-06FSP & CBMEM: Fix broken cbmem CAR transition.Martin Roth
1) Save the pointer to the FSP HOB list to low memory at address 0x614. This is the same location as CBMEM_RESUME_BACKUP - the two aren't used in the same platform, so overlapping should be OK. I didn't see any documentation that actually said that this location was free to use, and didn't need to be restored after use in S3 resume, but it looks like the DOS boot vector gets loaded juat above this location, so it SHOULD be ok. The alternative is to copy the memory out and store it in cbmem until we're ready to restore it. 2) When a request for the pointer to a CAR variable comes in, pass back the location inside the FSP hob structure. 3) Skip the memcopy of the CAR Data. The CAR variables do not get transitioned back into cbmem, but used out of the HOB structure. 4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform. Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8196 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
The name was always obscure and confusing. Instead define cbmem_top() directly in the chipset code for x86 like on ARMs. TODO: Check TSEG alignment, it used for MTRR programming. Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
This replaces need for separate cbmemc_reinit() calls made via CAR_MIGRATE() and in ramstage. Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7859 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-13soc/intel/fsp_baytrail/gpio.c: Silence unused variable warningEdward O'Callaghan
Put functions in appropriate pre-processor sections to avoid false-positive 'unused function' compiler warnings. Change-Id: Ia83d721827ad9924807c0ca5ebd681060af49a82 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8203 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-01-06Revert "Re-factor 'to_flash_offset()' into 'spi_flash.h'"Kyösti Mälkki
This reverts commit 9270553fff23462fcb298f154296319bf3639d15. Change-Id: I195f721ce7a18aac6c1aa6f4e0f9284455d531b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8138 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06Re-factor 'to_flash_offset()' into 'spi_flash.h'Edward O'Callaghan
Re-factor to_flash_offset() into 'spi_flash.h' header. Motivated by Clang complaining that the function 'to_flash_offset' is unused. Change-Id: Ic75fd2fb4edc5e434c199ebd10c7384d197e0c63 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7519 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
Cherry-pick from chromium and adjusted for added boards and changed directory layout for arch/arm. Timestamp implementation for ARMv7 Abstract the use of rdtsc() and make the timestamps uint64_t in the generic code. The ARM implementation uses the monotonic timer. Original-Signed-off-by: Stefan Reinauer <reinauer@google.com> BRANCH=none BUG=chrome-os-partner:18637 TEST=See cbmem print timestamps Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62 Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793 (cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c) Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8020 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-19fsp_baytrail: Initialize LPC pads in bootblock for port 80Martin Roth
Port 80h codes were coming out of bootblock and romstage scrambled, or were not coming out at all. Initializing the LPC signal pads as LPC fixes that issue. Change-Id: I16943513f2eb6fe8fa58766aaa82dac182440c34 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7802 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19fsp_baytrail: Remove GPIO_NC1 #defineMartin Roth
The GPIO_NC1 #define was added to handle GPIOs that are not on func0. This is already handled elsewhere in the GPIO code, so is not needed. - Remove the single GPIO_NC1 from platforms using fsp_baytrail - Revert the GPIO_INPUT_PU_10k #define to remove the _func argument. Update everywhere this macro is called. - Remove GPIO_NC1 Change-Id: I32f337af7bc88eab821d9a8c375145b45718275f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7849 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19baytrail SOCs: Add missing comma in gpio.hMartin Roth
The GPIO_OUT_LOW #define was missing an internal comma in both soc/intel/baytrail and soc/intel/fsp_baytrail. Thanks to Werner Zeh for pointing this out. Change-Id: I2e5507058739e5fdc2c0e43e0380058458870e46 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7801 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
2014-12-17fsp_baytrail: Add code to read GPIOs in romstageMartin Roth
- Build gpio.c into romstage - Add functions to translate the GPIO # to a pad #, then return the value read from the GPIO. - Add functions to configure the GPIO - Function, Pull up/down, pull strength, Input/Output, and Output level. Change-Id: Ic37dfc9a74a598023bdf797d31087428adec176a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7796 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
2014-12-16CBMEM console: Fix boards with BROKEN_CAR_MIGRATEKyösti Mälkki
There is no need to call cbmemc_reinit() exclusively in romstage, that is done as part of the CAR migration of cbmem_recovery(). CBMEM console for romstage remains disabled for boards flagged with BROKEN_CAR_MIGRATE, but with this change it is possible to have it for ramstage. Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
Flag the boards with BROKEN_CAR_MIGRATE, as testing for EARLY_CBMEM_INIT is not enough to disable CBMEM console for romstage on these platforms. To have CBMEM early in ramstage, define get_top_of_ram() on sandy/ivy. Change-Id: Ieefc12099a0e043eb1a7e14bdc7c6e3d209b3d8f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7468 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-09spi: Eliminate the spi_cs_activate and spi_cs_deactivate functions.Gabe Black
They were only used internal to the SPI drivers and, according to the comment next to their prototypes, were for when the SPI controller doesn't control the chip select line directly and needs some help. BUG=None TEST=Built for link, falco, and rambi. Built and booted on peach_pit and nyan. BRANCH=None Original-Change-Id: If4622819a4437490797d305786e2436e2e70c42b Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/192048 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1e2deecd9d8c6fd690c54f24e902cc7d2bab0521) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida08cbc2be5ad09b929ca16e483c36c49ac12627 Reviewed-on: http://review.coreboot.org/7708 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-09spi: Remove the spi_set_speed and spi_cs_is_valid functions.Gabe Black
spi_set_speed was never implemented, and spi_cs_is_valid was only implemented as a stub and never called. BUG=None TEST=Built for rambi, falco, and peach_pit. BRANCH=None Original-Change-Id: If30c2339f5e0360a5099eb540fab73fb23582905 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/192045 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 98c1f6014c512e75e989df36b48622a7b56d0582) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iebdb2704ee81aee432c83ab182246d31ef52a6b6 Reviewed-on: http://review.coreboot.org/7707 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
- In '-ffreestanding' main() is just as any other function and so it needs a type-signature. Fixes a clang warning. - Bay Trail and Rangeley have the updated romstage.c with the code moved into the chipset, put the prototype in romstage.c. - The sandybridge code has not been updated, so the prototype for it goes into chipset_fsp_util.h, next to the prototype for romstage_main_continue. - Correct the return value of baytrail main() from void * to void and remove the unnecessary asmlinkage tag. I'm surprised that this didn't generate a warning... Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7724 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-08intel/fsp_baytrail: Spelling fixesMartin Roth
Change-Id: Ica9e3a91718a7e490ff80e5029fc29650355eb47 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7704 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-05fsp_baytrail: Update function disable codeMartin Roth
- The EDS has the function disable bit for eMMC incorrectly listed as 8. Changing it back to the correct bit 11. - The FSP will disable functions that it is told are disabled, so coreboot code that disables the functions is redundant. Removing it. Change-Id: I95c31d92d3af5182ddf7fd47f651bbb61cdedb82 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7653 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: Kconfig update for Gold 3 FSPMartin Roth
The documentation for the FSP gives the name as BAYTRAIL_FSP.fd instead of the old FvFsp.bin. Change-Id: I69c7c5ff49afd6552612cf50c9ca9b30cfb003e2 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7648 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: Update microcode for Gold 3 FSP releaseMartin Roth
New microcode for Bay Trail I B2/B3 and D0 parts was released in the Gold 3 Bay Trail FSP release. Change the microcode size to an area instead of the exact size of the patches. This will hopefully reduce updates to the microcode size. Change-Id: I58b4c57a4bb0e478ffd28bd74a5de6bb61540dfe Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7647 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05FSP platform microcode: Update to remove Kconfig variableMartin Roth
Move the Kconfig variable into a .h file - this does not need to be in Kconfig. Change-Id: I1db20790ddb32e0eb082503c6c60cbbefa818bb9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: remove register option for TSEG sizeMartin Roth
Set the UPD entry based on the Kconfig value instead of having two separate places that the value needs to be set. Change-Id: I3d32111b59152d0a8fc49e15320c7b5a140228a6 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7490 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2014-12-05fsp_baytrail: update printk to use FSP_INFO_LEVELMartin Roth
Update the printk statements to use FSP_INFO_LEVEL instead of BIOS_DEBUG. These values are currently identical, but by using the second #define, it lets them all be changed as a unit. This can be overridden for a particular platform by adding a #define in chipset_fsp_util.c. Change-Id: Idbf7e55090230ec940c7c8cd3ec8632461561428 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7520 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update for UPD_DEVICE_CHECK macroMartin Roth
- Update chipset_fsp_util.c to use the UPD_DEVICE_CHECK macro. This makes the code more standardized and easier to read. - Add some debug printing that was removed in the transition. Change-Id: Iea24dd9ca53f39791bc6371291a3fa7a6fc5ed0f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7498 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update to add the UPD_MEMDOWN_CHECK macroMartin Roth
- Update chipset_fsp_util.h to add the UPD_MEMDOWN_CHECK pointing into the PcdMemoryParameters structure. This is baytrail FSP specific, so it's put into the chipset code instead of the 'driver' code. Since some of the values need to be decremented and some do not, a second parameter was added to control this. This macro also does not print out the values as they are printed out separately if memory down is enabled. - Update chipset_fsp_util.c to use the UPD_MEMDOWN_CHECK macro. This makes the code more standardized and easier to read. Change-Id: I233e45db43af4726cab41f4880f1706cf8abb0b7 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7632 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update for UPD_SPD_CHECK macroMartin Roth
Update chipset_fsp_util.c to use the UPD_SPD_CHECK macro. This makes the code more standardized and easier to read. Change-Id: I9944e1a4df82e64a205598e98ed0f3b840af1019 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7489 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-12-05fsp_baytrail: update to add the UPD_DEFAULT_CHECK macroMartin Roth
- Update chipset_fsp_util.c to use the UPD_DEFAULT_CHECK macro. This makes the code more standardized and easier to read. - Update chip.h to use standardized macros Change-Id: Icbe5ec92b0aa31e21f3dd1593a96b246d83008f7 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7488 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-01Mark non-executable files non-executablePatrick Georgi
No need to mark Makefiles, C files or devicetrees executable. Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
According to spec IRQ1 isn't available for PIRQ assignment. Has gone unnoticed probably because modern OS use MSI or at least APIC and even with noapic don't use IRQ1 with PCI IRQs. Change-Id: Idc7db249007df629b27e8cae41cc80358d5306f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7478 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-24intel/fsp_baytrail: add new CPUID for Baytrail I step D0Herve ELter
Change-Id: I9e29ca10689cbbbaba593185868e54b8697aa9c4 Signed-off-by: Herve Elter <rvnvv74@gmail.com> Reviewed-on: http://review.coreboot.org/7523 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: build bot (Jenkins)
2014-11-21intel/fsp_baytrail: add Gold3 FSP supportYork Yang
Baytrail Gold3 FSP adds a couple of parameters in UPD_DATA_REGION making platform more configurable via devicetree.cb Update the UPD_DATA_REGION structure and pass settings to FSP Add Baytrail Gold2 and earlier FSP backward compatible, as Gold3 FSP changes UPD_DATA_REGION struct Change-Id: Ia2d2d0595328ac771762a84da40697a3b7e900c6 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/7334 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 05:14:29 +0000