aboutsummaryrefslogtreecommitdiff
path: root/src/soc/intel/fsp_baytrail
AgeCommit message (Collapse)Author
2017-12-17soc/intel/fsp_baytrail: remove nvm headers and codeAaron Durbin
This code is not used at all any longer. Remove it. BUG=b:69614064 Change-Id: I362280f876a335c0cc1c5691b86f5b27e3b5e2c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07src: Fix all Siemens copyrightsMario Scheithauer
Some Siemens copyright entries incorrectly contain a dot at the end of the line. This is fixed with this patch. Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-11cpu/x86/mp_init: remove adjust_cpu_apic_entry()Aaron Durbin
The original purpose of adjust_cpu_apic_entry() was to set up an APIC map. That map was effectively only used for mapping *default* APIC id to CPU number in the SMM handler. The normal AP startup path didn't need this mapping because it was whoever won the race got the next cpu number. Instead of statically calculating (and wrong) just initialize the default APIC id map when the APs come online. Once the APs are online the SMM handler is loaded and the mapping is utilized. Change-Id: Idff3b8cfc17aef0729d3193b4499116a013b7930 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-07-13soc/intel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I3c5f9e0d3d1efdd83442ce724043729c8648ea64 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-26soc/intel/fsp_baytrail/include/soc/pci_devs.h: Add brackets around macroElyes HAOUAS
Code checked manually Change-Id: I91ababb3bf7aa1ab0f71bb005c4685e81bb4d92f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-24soc/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-26soc/intel/fsp_baytrail: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside soc/intel/fsp_baytrail. Change-Id: I2791346289c04049e6f032c8e120e4be9ba6657f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17319 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-13fsp_baytrail: Enable graphic init per defaultWerner Zeh
Baytrail SoC has a bug where in some cases the DisplayPort can hang leading to a non-working display (it just stays black). To avoid this hang, a patch was introduced in 02/2016 (1c3b1112fa - fsp_baytrail: Fix a possible hanging DisplayPort) but per default not switched on so that each mainboard can decide if it wants to use this patch or not. Recently a new case of this bug was reported by Benoit Sansoni (benoit.sansoni@kontron.com) and he requested to enable this fix per default as it costs him a lot of time to find the cause and even the already available fix in coreboot. To avoid this effort for someone else in the future we can enable this fix per default as no negative side effects are known and it is now tested at Siemens and at Kontron on different mainboards with success. As the goal is to enable this code permanently the config switch is not longer needed and is removed. Change-Id: I15bd682218d0dc887945cc91ee3e5488945a6355 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/18109 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12fsp 1.0 systems: Check for NULL when saving HobListPtrMartin Roth
Die if cbmem_add can't allocate memory for the hob pointer. This shouldn't ever happen, but it's a reasonable check. - fsp_broadwell_de already had a check, but it returned to someplace inside the FSP. Just die instead. Change-Id: Ieef8d6ab81aab0ec3d52b729e34566bb34ee0623 Found-by: Coverity Scan #1291162 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18092 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01romstage_handoff: remove code duplicationAaron Durbin
The same pattern was being used throughout the code base for initializing the romstage handoff structure. Provide a helper function to initialize the structure with the S3 resume state then utilize it at all the existing call sites. Change-Id: I1e9d588ab6b9ace67757387dbb5963ae31ceb252 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17646 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-16intel/fsp_baytrail: Fix assignment of PcdeMMCBootModeDavid Imhoff
Before the PcdeMMCBootMode in the Updatable Product Date was always assigned and didn't take into account the + 1 increment for the default define. Now if the configuration indicates that the device tree should be followed PcdeMMCBootMode is initially disabled. Else if configuration isn't the default, assign the value with the + 1 increment substracted. TEST=Intel/MinnowMax Change-Id: I6755eb585d1afe3a15f83347fba834766eb44ad2 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10165 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16intel/fsp_baytrail: Always log PcdEnableLpe and PcdeMMCBootModeDavid Imhoff
Log the values of PcdEnableLpe and PcdeMMCBootMode even if they are outside of the expected range. TEST=Intel/MinnowMax Change-Id: Ie0aea4287234b23d4e9852f3991dcc78ce8103d9 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: https://review.coreboot.org/10164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-06fsp_baytrail: Refactor code for SPI debug messagesWerner Zeh
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather then on preprocessor level to ensure that the code is compiled even if the switch is not selected. In addition the following two changes are introduced: 1. Prepend the debug messages with 'SPI:' to make the output more meaningful. 2. Change the address mask from 0xffff to 0x3ff and remove the subtraction of the constant value 0xf020 in order to print only the register offset within the SPI controller and avoid the visibility of any fragments from SPI base address. 3. Switch to uint8_t and friends instead of u8 to sync up with other code in the same file. Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-28src/soc: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16325 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-15soc/intel/fsp_baytrail: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I1ff1517ded2d43e3790d980599e756d0d064f75c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-06PCI: Use PCI_DEVFN macro instead of DEV_FUNCWerner Zeh
There are several different macros available to convert a PCI device and function to a single 8 bit value. One is PCI_DEVFN and is defined in device/pci_def.h. The other is DEV_FUNC and is defined in several intel fsp based chipset implementations. In fsp_broadwell_de DEV_FUNC is even used without being defined at all. This patch unifies the situation so that only PCI_DEVFN is used. Change-Id: Ia1c6d7f3683badc66d15053846936d88aa836632 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15546 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-29intel romstage: Use run_ramstage()Kyösti Mälkki
Change-Id: I22a33e6027a4e807f7157a0dfafbd6377bc1285d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15461 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03intel/fsp_baytrail/i2c: mask i2c interrupts in i2c_init()Ben Gardner
i2c_init() leaves the I2C device enabled. Combined with the default interrupt mask (0x8ff) and the fact that the interrupt line is shared, this leads to an interrupt storm in the OS until a proper I2C driver is loaded. This change clears the interrupt mask to prevent the interrupt storm. Change-Id: I0424a00753d06e26639750f065a7a08a710bfaba Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/15047 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-05-06{cpu,soc}/intel: remove unused smm_init() functionAaron Durbin
There used to be a need for an empty smm_init() function because initialize_cpus() called it even though nothing called initialize_cpus(). However, garbage collection at link time is implemented so there's no reason to provide an empty function to satisfy a symbol that is completely culled during link. Remove it. Change-Id: Ic13c85f1d3d57e38e7132e4289a98a95829f765a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14605 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-04soc/intel/fsp_baytrail: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I709ea938b720f26b351a1f950593efe077edb997 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14581 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2016-05-02cpu/x86/mp_init: remove unused callback argumentsAaron Durbin
The BSP and AP callback declarations both had an optional argument that could be passed. In practice that functionality was never used so drop it. Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14556 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-28fsp_baytrail: Fix missing "$" when using Kconfig switchWerner Zeh
To include gfx.c in ramstage, there is a Kconfig option (FSP_BAYTRAIL_GFX_INIT) which can be activated on demand. Unfortunately, the "$"-character is missing so that this switch is never active. Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/14532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-16intel/fsp_baytrail: Eliminate warning about missing set_resourcesBen Gardner
In northcluster.c, the set_resources member of struct device_operations is set to NULL. That causes this message on the console: PCI: 00:00.0 missing set_resources Eliminate that warning by setting set_resources=DEVICE_NOOP. Change-Id: I4c6c07fd40b180ca44fe67c4a4d07318df10c40f Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14366 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-15intel/fsp_baytrail: fix whitespace issue in romstage.cBen Gardner
Change-Id: Ibb36292bb2fd40aa453dba1d9ce821f3e1e7a823 Reviewed-on: https://review.coreboot.org/14354 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-25intel/fsp_baytrail: Fix I2C abort logicBen Gardner
A call to i2c_read() for a non-existent address followed by an i2c_read() to a valid address results in a false abort status for the 2nd call. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT) Because the abort status register is cleared on read and wait_tx_fifo() reads it twice, the returned status does not contain the abort status. Fixing that changed the 2nd read to reflect the abort status. i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT) Bit 0 indicates that the address was not acknowledged by any slave. That's the abort status from the previous transaction. So I added a read of the abort status before starting a transaction in both i2c_read() and i2c_write(). i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT) i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS) Tested on a Bay Trail E3845 SoC. Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-03-25intel/fsp_baytrail: Use read32() and write32() in i2c.cBen Gardner
i2c.c uses "*(volatile unsigned int *)" constructs where it could use read32() and write32(). Switch to using read32() and write32(). The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed in https://review.coreboot.org/#/c/14160/ Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe (intel/fsp_baytrail: Fix I2C abort logic) I also fixed a few minor white space issues. Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14162 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-03-14intel/fsp_baytrail: Enable LPSS in ACPI modeBen Gardner
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would result in unusable devices, as the resources were set to 0 and the devices were disabled. lpss.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode set to disable and the devicetree set to default. Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Fix LPE initialization and enable ACPI modeBen Gardner
This change properly assigns resources to the LPE (Low Power Engine for Audio) and enables ACPI mode. lpe.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Don't clear gnvs in acpi_init_gnvs()Ben Gardner
That wipes out all previously stored settings and breaks running devices in ACPI mode. This more closely matches what is done in intel/baytrail. Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-07intel/fsp_baytrail: use 20K PU/PD for GPIOBen Gardner
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs. The 10K and 40K values map to 'reserved'. This brings the code closer to the non-FSP baytrail. Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/13907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-25fsp_baytrail: Fix a possible hanging DisplayPortWerner Zeh
On some devices it can happen that DisplayPort TX lanes do not work properly if the power gate setup is omitted. If that happens, DisplayPort training will fail and therefore DisplayPort channel will not work. Both ports are affected. It seems that not every CPU shows this effect and those that are affected tend to fail more often in a cold environment. With this fix a board that originally shows this failure was running for over 1000 power cycles without issues. Change-Id: Ia266674490a1bee63a85b38d1dc949dcdf683cbc Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13743 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-22fsp_baytrail: Add full support for iosf access in reg_scriptWerner Zeh
Add all needed functions to fsp_baytrail so that reg_script can do full iosf access. To keep it simple, this patch synchronises iosf access between baytrail and fsp_baytrail. Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
Baytrail FSP MR 005 adds two new fields: AutoSelfRefreshEnable APTaskTimeoutCnt Add the device tree definitions. Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12973 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-08fsp_baytrail: Add additional PCI space above 4GBMartin Roth
This just tells the OS that it can use the 16GB of address space at the 48GB mark for PCI. This is the upper 16GB of Bay Trail's 36 bit physical address space. This could be hardcoded into the UMEM definition, but doing it this way makes it more plain what it's doing, and allows for modification to put it just above the top of upper memory, similar to what is done with the standard PCI region above the top of low memory. Change-Id: Id6208c3712e5d94d62a83c4ac69e8ffd0e19f4ad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12791 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: York Yang <york.yang@intel.com>
2015-12-22soc/intel/fsp_baytrail: Make sure i2c bus is < 7Martin Roth
Baytrail has I2c Busses 0 to 6, so is supposed to error out if the I2c driver is called with 7 or greater. Due to an off-by-one error it could be called with bus 7. Fixes coverity warning: CID 1287074 (#1 of 1): Out-of-bounds read (OVERRUN) 3. overrun-local: Overrunning array base_adr of 7 4-byte elements at element index 7 (byte offset 28) using index bus (which evaluates to 7). Change-Id: I7caec60298cf27bd669796e0e05e4a896f92befd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12781 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-17soc/intel/fsp_baytrail: Adjust root port INT routingMartin Roth
Adjust the root port INT routing based on Bay Trail spec: Document Number: 538136, Rev. 3.9 Table 241. Interrupt Generated for INT[A-D] Interrupts INTA INTB INTC INTD Root Port 1 INTA# INTB# INTC# INTD# Root Port 2 INTD# INTA# INTB# INTC# Root Port 3 INTC# INTD# INTA# INTB# Root Port 4 INTB# INTC# INTD# INTA# Change-Id: I22a8c0bc6ad731dfb79385d6e165f1ec0a07507d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12684 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2015-12-16intel/fsp_baytrail: change indent to use tabsBen Gardner
Change-Id: If0d0a15442738bab0e34f1b05513e7f8e8fa9afc Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-16intel/fsp_baytrail: rename include folder baytrail to include/socBen Gardner
This is to match the layout of the non-fsp baytrail to make comparisons easier and possibly remove duplicate files. Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12686 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-16intel/fsp_baytrail: Fix PCI_DEV_PIRQ_ROUTE macro endingBen Gardner
The macro PCI_DEV_PIRQ_ROUTE ends with a comma and escaped newline. Ending a macro with an escaped newline is always wrong. The final comma is not necessary, as all uses of PCI_DEV_PIRQ_ROUTE() properly separate calls with a comma. I haven't investigated whether this is causing a real issue, but it should be leaving gaps in struct baytrail_irq_route.pcidev. The non-FSP baytrail does not have this issue. Change-Id: If6782176068b07cb3bc819c00d1cdb1b618bcea8 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10intel/fsp_baytrail: Remove code for nonexistant BBARBen Gardner
The BBAR register (BIOS Base Address Configuration Register) defined in the ICH9 datasheet does not exist in the Bay Trail E3800 datasheet. Accessing it seems harmless, but should likely be avoided. Change-Id: I5d9a6a1ccead84c8996796f516a2bdc5f248cfef Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-06fsp_baytrail: Add missing newline to eMMC Mode logBen Gardner
Change-Id: Icd697053c2ea1a2ac42bdd045134d223d93d5403 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12623 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-30fsp_baytrail: Remove use of BAYTRAIL_SMM Kconfig symbolMartin Roth
The symbol BAYTRAIL_SMM was never valid (there's no config statment initializing the symbol), but it was being selected and used in the code. Now that SMM is supported in fsp_baytrail, the code it was trying to switch can be removed, and just set up for SMM. Change-Id: I0fd4865a951734e728500e7baf593ff7eb556f73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12553 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2015-11-21baytrail: add C0 and D0 stepping decodeBen Gardner
The E3800 with ordering code FH8065301487717 is stepping D0, value 0x11. Add that so the debug log shows 'D0' instead of '??'. Also, add the C0 stepping decode to fsp_baytrail. Change-Id: Ibec764fcf5d3f448e38831786a071f5ab6066d67 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: http://review.coreboot.org/12488 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-20fsp1_0: Remove hardcoded microcode locationsMartin Roth
These are no longer needed. Test: Booted minnowmax. Change-Id: Ie77040f3506464c614760bd4d30280c8113373bd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12468 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-17fsp_baytrail: use external microcode .h filesMartin Roth
The microcode for Bay Trail that's in the blobs repo is for the M and D chip variants only. The fsp_baytrail directory is for Bay Trail I chip variants, and will not boot if the M/D microcode is used. The microcode for the I variant is supplied as part of the Bay Trail FSP package. Change-Id: I5493deb1626dc3cf037053e13e092f5a1143a13a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-16intel/fsp_baytrail: Load APs microcode in baytrail_init_cpusYork Yang
Load microcode to APs when performing baytrail_init_cpus. The updated fsp1_0 driver calls TempRamInit API with a dummy microcode, so FSP will not handle the microcode load. Change-Id: I7b7c0f43da0d149048ae5a8fd547828f42de04fd Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/12095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-16intel/fsp_baytrail: Load BSP microcode in bootblockYork Yang
Load microcode to BSP in bootblock so later on the FSP TempRamInit call can be success. The updated fsp1_0 driver calls TempRamInit API with a dummy microcode, so FSP will not handle the microcode load. If BSP is not loaded a microcode before calling TempRamInit API, the call will fail with the error No Valid Microcode Was Found. Change-Id: I1fbe68e14e5a24d8f2da70603cd2f03675b9ca81 Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/11896 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
Up to now the GPIO set up macros for input sets up GPIOs to be mapped to memory space while macros for outputs sets up GPIOs to be mapped to legacy io space. This patch adds two additional macros for legacy output definition and changes the old macros to memory space mapping. In addition, the intel/minnowmax mainboard is modified to use the legacy macros for outputs to ensure this mainboard stays unchanged in terms of functionality. TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux. Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12340 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-09fsp_baytrail: Add functions to set a GPIOWerner Zeh
Add two functions to set a memory mapped GPIO to a given value. TEST=Booted siemens/mc_tcu3 board and confirmed GPIO-value after using this functions. Change-Id: Idc14c5d4049487e60040cc294ba0cea363d998a6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-23intel/fsp_baytrail: Fix logging of ISPEnable optionDavid Imhoff
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP configuration option. TEST=Built and booted on Minnowboard Max Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10126 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-15cpu/mtrr.h: Fix macro names for MTRR registersAlexandru Gagniuc
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR, we also remove the _MSR suffix, as they are, by definition, MSRs. Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-01intel/fsp_baytrail: Remove unused MICROCODE_INCLUDE_PATH from KconfigWerner Zeh
Since fsp_baytrail was refactored to use microcode.bin in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more. Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/11762 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
Using a copiler to compile something that's already a binary is pretty stupid. Now that Stefan converted most microcode in blobs to a plain binary, use the binary version. Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11607 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29intel: auto include intel/common/firmwareAaron Durbin
Instead of selecting the Kconfig option and adding the subdir entry within each chipset auto include the common/firmware directory as it's guarded by HAVE_INTEL_FIRMWARE. BUG=chrome-os-partner:43462 BRANCH=None TEST=Built glados. Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11734 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-21intel/fsp_baytrail: Support Baytrail FSP Gold4 releaseYork Yang
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION structure to include these new PCD options and initialized the setting when given in devicetree.cb. Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/10838 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-17soc/intel: Remove microcode terminatorsStefan Reinauer
They have been removed in the rest of the code already. http://review.coreboot.org/#/c/4506/ Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10964 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24Kconfig: Get rid of obsolete symbolsMartin Roth
CAR_MIGRATION was removed in commit: cbf5bdfe - CBMEM: Always select CAR_MIGRATION ALT_CBFS_LOAD_PAYLOAD was removed in commit: cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD MARK_GRAPHICS_MEM_WRCOMB was removed in commit: 30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB. EXTERNAL_MRC_BLOB was removed in commit: 0aede118 - Drop unused EXTERNAL_MRC_BLOB CACHE_ROM is only in Google's codebase. LID_SWITCH is only in Google's codebase. DEFAULT_POST_DEVICE_LPC is only in Sage's codebase. ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used. HUDSON_NOT_LEGACY_FREE never existed as far as I can tell. MAINBOARD_DO_EDID never existed as far as I can tell. Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10616 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
The CBFS size is really mainboard specific, since it really depends on size of the chip on the mainboard, so it makes sense to have it in the mainboard menu along with the ROM-chip size. - Move the CBFS_SIZE definition up in src/kconfig - Move the Mainboard Menu markers out of src/mainboard/kconfig into src/Kconfig so CBFS_SIZE can live in the mainboard menu. - Add a long list setting default values to do what the chipset directories were previously defaulting the values to. This will be trimmed down in a following patch that creates a common set of IFD routines. (Who knew that kconfig supported line wrapping?) - Update the help text. Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10610 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG Remove some newly dead code while on it. Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10355 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-26acpigen: Remove all explicit length trackingVladimir Serbinenko
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7367 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I6a1b1daa291298c85e14f89aa47a0693837cec6f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7037 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-04intel/fsp_baytrail: Fix SPI debuggingDavid Imhoff
Fix compiler error's due to type mismatch. This is broken since commit bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer). TEST=Build with CONFIG_DEBUG_SPI_FLASH=y and booted on Minnowboard Max Change-Id: Id3d448e219716135897f381a73d416ff34036118 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10075 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
Several of the intel platforms define the region reserved for PCI memory resources in a location where it overlaps with the MMIO (MCFG) region. Using the memory map from mohon_peak as an example: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-000000007fbcffff: RAM 4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES 5. 000000007fc00000-000000007fdfffff: RESERVED 6. 00000000e0000000-00000000efffffff: RESERVED 7. 00000000fee00000-00000000fee00fff: RESERVED 8. 0000000100000000-000000017fffffff: RAM The ACPI table describing the space set aside for PCI memory (not to be confused with the MMIO config space) is defined as the region from BMBOUND (the top of DRAM below 4GB) to a hardcoded value of 0xfebfffff. That region would overlap the MMIO region at 0xe0000000-0xefffffff. For rangeley the upper bound of the PCI memory space should be set to 0xe0000000 - 1. The MCFG regions for several of the affected chipsets are: rangeley 0xe0000000-0xefffffff baytrail 0xe0000000-0xefffffff haswell 0xf0000000-0xf3ffffff sandybridge 0xf8000000-0xfbffffff TEST = intel/mohonpeak and intel/bayleybay. Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/9972 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-04-29kbuild: automatically include SOCsStefan Reinauer
This change switches all SOC vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in soc/Makefile.inc or in soc/<vendor>/Makefile.inc. This means, vendor and SOC directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9799 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-28fsp platforms: consolidate FspNotify callsMartin Roth
Consolidate the FspNotify calls into the FSP driver directory, using BOOT_STATE_INIT_ENTRY to set up the call times. Change-Id: I184ab234ebb9dcdeb8eece1537c12d03f227c25e Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/9780 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 20:02:23 +0000