| Age | Commit message (Collapse) | Author |
|---|
|
The code for enabling ACPI timer emulation is the same for the SoCs
SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to
common code.
APL differs in not having the delay settings. However, the bits are
marked as "spare" and BWG mentions there are no "reserved bit checks
done". Thus, we can write them unconditionally without any effect.
Note: The ACPI timer emulation can only be used by SoCs with microcode
supporting CTC (Common Timer Copy) / ACPI timer emulation.
Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The code configuring ISST (Intel SpeedShift Technology) sets the ISST
capability bits in CPUID.06H:EAX. It does *not* activate HWP (Hardware
P-States), which shall be done by the OS only.
Since the capability is enabled by default (opt-out), there is nothing
to do for us in the enabled-case. Practically speaking, there is no
value at all in disabling the capability, since one can configure the
OS to not enable HWP if that is desired.
The two other bits for EPP and HWP interrupt that were set by the code
are not set anymore, too. It was tested, on three platforms so far
(CML-U, KBL-H, SKL-U), that these are set as well by default in the
MSRs reset value (0x1cc0).
To reduce complexity and duplicated code without actual benefit, this
code gets dropped. The remaining dt option will be dropped in CB:46462.
Test: Linux on Supermicro X11SSM-F detects and enables HWP:
[ 0.415017] intel_pstate: HWP enabled
Change-Id: I952720cf1de78b00b1bf749f10e9c0acd6ecb6b7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46460
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move a whole bunch of copy-pasta code from soc/intel/{bdw,skl,cnl,icl,
tgl,ehl,jsl,adl} and cpu/intel/{hsw,model_*} to cpu/intel/common.
This change just moves the code. Rework is done in CB:46588.
Change-Id: Ib0cc834de8492d59c423317598e1c11847a0b1ab
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46274
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This converts the constant for the XTAL frequency to a Kconfig option.
Change-Id: I1382dd274eeb9cb748f94c34f5d9a83880624c18
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Clone entirely from Jasperlake
List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Replace "jsp" with "mcc"
4. Rename structure based on Jasperlake with Elkhartlake
5. Clean up upd override in fsp_params.c will be added later
6. Sort #include files alphabetically as per comment
7. Remove doc details from espi.c until it is ready
8. Remove pch_isclk & camera clocks related codes
9. Add new #define NMI_STS_CNT & NMI_EN as per comment
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
