Age | Commit message (Collapse) | Author |
|
BUG=b:142961277
BRANCH=none
TEST=none
Change-Id: Ibe0991b2e0d13e07d65906201597f9021cfc7156
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Intel's EDS says "1 = GPIO Driver Mode. GPIO input event updates are
limited to GPI_STS. GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS updates
are masked." Therefore, the GPI_GPIO_DRIVER_SCI option for pad
configuration is meaningless, as any GPE will be masked if the GPIO
driver is set as owner.
Change-Id: Ia0cd0041dfc985cbe388cb89a4026038c7fb4383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35460
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use PAD_BUF() to disable the input/output buffer inside PAD_CFG_* macros
instead PAD_CFG0_RX_DISABLE/PAD_CFG0_TX_DISABLE
[1] https://review.coreboot.org/c/coreboot/+/34337
Change-Id: I19fd993e1f60d80eab0ce51eaed5e74ce1c6a34d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is no need to change the default value for the RX Level/Edge
Configuration parameter if the pad is not used/connected (PAD_NC)
Change-Id: Ie7eee83fba9320d52240166371fe0c757dbdce49
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
According to the documentation [1], by default the RX Level/Edge Trig
Configuration set to disable (2h = Drive '0') for each pad. Since this
setting doesn't matter for the GPO pad, there is no need to change the
default value for such pads. The patch updates PAD_CFG_GPO* macros to
set trig to disable. It also resolves some problems of creating the
PCH/SoC pads configuration based on information from the inteltool
dump [2,3]
[1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2,
February 2019, Document Number: 332691-003EN
https://www.intel.com/content/dam/www/public/us/en/documents/
datasheets/100-series-chipset-datasheet-vol-2.pdf
[2] https://review.coreboot.org/c/coreboot/+/34337
[3] https://github.com/maxpoliak/pch-pads-parser/issues/1
Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In the case there is no the circuit diagram for motherboard, the
PCH/SoC GPIOs config is based on information from the inteltool
dump. However, available macros from gpio_defs.h can't define the
pad configuration from this dump:
0x0440: 0x0000002084000500 GPP_A8 CLKRUN#
0x0448: 0x0000102184000600 GPP_A9 CLKOUT_LPC0
0x0450: 0x0000102284000600 GPP_A10 CLKOUT_LPC1
To convert these raw DW0/DW1 register values to macros, the following
parameters must be set:
func - pad function,
pull - termination,
rst - pad reset config,
trig - rx level/edge configuration,
bufdis - rx/tx (in/output) buffer disable.
The patch resolves the above problem by adding a new macro for the
native function configuration:
PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig)
These changes were tested on Asrock H110M-DVS motherboard [2].
It also resolves the problem of automatically creating pads
configuration [3,4]
[1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2,
February 2019, Document Number: 332691-003EN
https://www.intel.com/content/dam/www/public/us/en/documents/
datasheets/100-series-chipset-datasheet-vol-2.pdf
[2] https://review.coreboot.org/c/coreboot/+/33565
[3] https://github.com/maxpoliak/pch-pads-parser/issues/1
[4] https://github.com/maxpoliak/pch-pads-parser/commit/215d303
Change-Id: If9fe50ff9a680633db6228564345200c0e1ee3ea
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34337
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be
configured as GPI, GPIO Driver mode, and SCI interrupt.
Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by
PAD_CFG_GPI_IRQ_WAKE).
BUG=none
BRANCH=none
TEST=Compiles
Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For GPIO pads that are configured as no-connect (PAD_NC), setting it
as GPI (with Rx enabled) leads to GPE0_STS being set
incorrectly. Though this is not an issue in practice (GPE0_EN is not
set, so no events triggered), it can confuse users when debugging GPE
related issues.
This change configures PAD_NC to have Rx disabled along with Tx to
ensure that it does not end up setting GPE0_STS bits for unwanted
GPIO pads.
P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that
configuration as is.
BUG=b:129235068
TEST=Verified that GPE0_STS bits are not set for pads that are marked
as PAD_NC.
Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add new helper macros to enable configuring debounce duration for a
GPIO input. Also ensure that the debounce configuration is not masked
out.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the debounce
duration is configured as expected.
Change-Id: I4e3cd7744867bcfbaed7d3d96fed4e561afb2cec
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Currently all the helpers support configuring GPIO_DW0/1 registers. In
some architectures there is an additional configuration GPIO_DW2 register
that can be used to configure debounce duration etc. Add a helper macro
to enable configuring GPIO_DW2 pad register.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the current
configuration is not disturbed by turning on the GPIO_DEBUG option and
verifying the debug output before and after the change.
Change-Id: I3e5d259d007fdc83940a43cc4cd4a2b8a547d334
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds new macros to GPIO common library helpers to allow
a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds
a helper macro to configure a pad for IRQ and wake.
Above macros are guarded using a newly added Kconfig option
SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only
by SoCs that have been validated to allow dual route of
GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that
have been validated to work with dual-routing of GPIs for IRQ and
wake.
BUG=b:117553222
Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29188
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates various PAD_CFG_GPI* macros to configure Tx as
Disabled in IO Standby state. This is done to ensure that the Tx
setting is same in IO Standby state as it was in active state i.e. Tx
disabled.
BUG=b:17553222
Change-Id: If462aee3884cc61a519fb358b84867c695ace251
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to make the macro name consistent for all PAD_CFG1_IOSSTATE_*
macros, this change uses lower case x for *RXD*. It helps avoid
confusion when using the macros.
Change-Id: I6b1ce259ed184bcf8224dff334fcf0a0289f1788
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/28924
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4e1f009489f2d8338ae94b78d7e9eb3f88a85daa
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/26730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
1. Explicitly add LOGICAL to the reset macro name to make it explicit
that the values are logical.
2. Reword some of the comments and combine them into single comment
instead of scattering the comments throughout.
3. Use c99 struct initializers for the reset mapping array.
4. For the chipset specific values use literals that match the hardware.
5. Use 'U' suffixes on the literals so we don't trip up compiler being
over zealous on undefined behavior.
6. Use unsigned and fixed-width types for the reset mapping structure
since the code is reliant on matching up with a register definition.
7. Fix formatting that can fit < 80 cols.
Change-Id: Iaa23a319832c05b8a023f6e45c4ee5ac06dd7066
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic48401e92103ff0ec278fb69a3d304148a2d79aa
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|