summaryrefslogtreecommitdiff
path: root/src/soc/intel/broadwell
AgeCommit message (Expand)Author
2015-04-10broadwell: Set PCIe replay timeout to 0xDDuncan Laurie
2015-04-10broadwell: Add configuration for tuning VR for C-state operationsDuncan Laurie
2015-04-10broadwell: Preserve VbNv around cmos_initDuncan Laurie
2015-04-10broadwell: Add function to apply PRR to a range of SPI flashDuncan Laurie
2015-04-10broadwell: Turn off panel backlight in S5 SMI handlerDuncan Laurie
2015-04-10broadwell: Skip steps when disabling PCIe portDuncan Laurie
2015-04-10broadwell: Remove XHCI workarounds on WPTDuncan Laurie
2015-04-10broadwell: Only do pre-graphics delay when running option romDuncan Laurie
2015-04-10broadwell: Fix PCIe ports programming sequences to enable HSIOPCWenkai Du
2015-04-10broadwell: Update SATA Gen3 TX adjustment registersDuncan Laurie
2015-04-10broadwell: Add a few bits to finalize stepDuncan Laurie
2015-04-10Broadwell: Set boot_mode of pei_data before running reference codeKenji Chen
2015-04-10broadwell: Increase I2C SDA hold timing to 300nsChiranjeevi Rapolu
2015-04-10broadwell: add RCBA posting read after writingWenkai Du
2015-04-10Broadwell: Synchronization with FRC for Root Port Power ManagementKenji Chen
2015-04-10broadwell: Skip DDI-A enable in S3 resumeDuncan Laurie
2015-04-10broadwell: Add support for ACPI \_GPE._SWSDuncan Laurie
2015-04-08console: fix Kconfig usesPatrick Georgi
2015-04-07broadwell: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-04broadwell: Enable turbo ratio if availableDuncan Laurie
2015-04-04Broadwell: Pass TSC value to romstage_mainLee Leahy
2015-04-04broadwell: fix typo in pei_dataDuncan Laurie
2015-04-04broadwell: Add USB3 PHY tuning fields to PEI DATADuncan Laurie
2015-04-04Broadwell: Fix PCIe L1 Sub-State capability ID not filled.Kenji Chen
2015-04-04broadwell: Fix building with USE=quiet-cbDuncan Laurie
2015-04-03rmodule: use struct prog while loading rmodulesAaron Durbin
2015-04-02Broadwell: Select PCIE_L1_SUB_STATE and apply Broadwell settings.Kenji Chen
2015-04-02broadwell: Disable ADSP power gating feature by defaultDuncan Laurie
2015-04-02broadwell: Add event log entry for GPIO27Duncan Laurie
2015-04-02Broadwell: Reg_Script: add END tag to array "smbus_init_script"Ryan Lin
2015-04-02Broadwell: Synchronize for power management with FRCKenji Chen
2015-04-02Broadwell: Synchronize RO, Link Arbiter, and OBFF with FRCKenji Chen
2015-04-02Broadwell: Revise programming flow for write-once registersKenji Chen
2015-04-02broadwell: Configure IOSF Port and Grant CountKenji Chen
2015-04-02Samus: Synchronization with FRC to enable PCIe Relaxed Order.Kenji Chen
2015-04-02broadwell: Update PCIe configuration to follow BWGKane Chen
2015-04-02broadwell: Clear pending GPE events before entering sleep stateDuncan Laurie
2015-04-02broadwell: Add reporting of broadwell MCH revisionDuncan Laurie
2015-04-02broadwell: Change CPUID 306D4 to report "E0 or F0"Duncan Laurie
2015-04-02broadwell: me: Fix typo and add missing phase stateDuncan Laurie
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
2015-03-30broadwell: fix HAVE_REFCODE_BLOB build errorsAaron Durbin
2015-03-30Update hex values to CBFS binary name types in MakefilesMartin Roth
2015-03-27broadwell: add support for smbios type17 in broadwellKane Chen
2015-03-27broadwell: Fix some errors in selftestKane Chen
2015-03-27broadwell: Apply pcie updates from 2.1.0 ref codeKane Chen
2015-03-27broadwell: Read and save HSIO version from ME in romstageDuncan Laurie
2015-03-27broadwell: Fix GPE register addressesDuncan Laurie
2015-03-27broadwell: Changes from 2.2.0 ref codeDuncan Laurie
2015-03-27broadwell: Add broadwell specific platform ASLDuncan Laurie
2015-03-27broadwell: fixed power gating enable for disabled sata portKane Chen
2015-03-27broadwell: sata updates from 2.1.0 ref codeKane Chen
2015-03-27broadwell: Fix devslp enable to use correct registerDuncan Laurie
2015-03-27broadwell: Add small delay before Flex Ratio rebootDuncan Laurie
2015-03-27broadwell: Fix TCO register size and event reportingDuncan Laurie
2015-03-27broadwell: Misc updates from 2.1.0 ref codeDuncan Laurie
2015-03-27samus: Disable CMDPWR on broadwellKane Chen
2015-03-27broadwell: Tweak GFXPAUSE settings based on revisionDuncan Laurie
2015-03-27broadwell: Add config option to disable DSP power gating in D3Duncan Laurie
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
2015-03-10ACPI: Get S3 resume state from romstage_handoffKyösti Mälkki
2015-03-09broadwell: enable PCIe endpoint CLK power managementKane Chen
2015-02-25intel/broadwell: free local heap objectPatrick Georgi
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
2015-01-27vboot2: add verstageStefan Reinauer
2015-01-14baytrail broadwell: Use timestamps internal stashKyösti Mälkki
2015-01-12soc/intel/broadwell/me.c: Prevent unused function warningEdward O'Callaghan
2015-01-12soc/intel/broadwell/spi_loading.c: Remove dead codeEdward O'Callaghan
2015-01-06broadwell: Use correct include file for console functionsStefan Reinauer
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
2014-12-31broadwell: Preparations for buildingMarc Jones
2014-12-28intel baytrail broadwell: Include microcode updatesKyösti Mälkki
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
2014-12-08intel/broadwell: Spelling fixesMartin Roth
2014-12-02Replace hlt with halt()Patrick Georgi
2014-11-30Replace hlt() loops with halt()Patrick Georgi
2014-11-28ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
2014-11-19broadwell: move to per-device ACPI.Vladimir Serbinenko
2014-11-13intel: use crosscompiler readelf, instead of globalPatrick Georgi
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-11-08intel: Use 'FORCEWAKE_ACK_HSW' define over '0x130044'Edward O'Callaghan
2014-11-04Redundant addr '&' operator on func ptr's in struct initiatorEdward O'Callaghan
2014-11-01{cpu,soc}: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
2014-10-22broadwell: Update Haswell and Broadwell E0 microcodeDuncan Laurie
2014-10-22broadwell: Update microcodeDuncan Laurie
2014-10-22broadwell: ACPI, romstage, and other updatesDuncan Laurie
2014-10-22broadwell: Update D0 microcode to FFFF000EDuncan Laurie
2014-10-22broadwell: Update microcode for supported CPUsDuncan Laurie
2014-10-22broadwell: add new intel SOCDuncan Laurie