summaryrefslogtreecommitdiff
path: root/src/soc/intel/broadwell/Kconfig
AgeCommit message (Collapse)Author
2022-11-28sb,soc/intel: Apply transitional flag TCO_SPACE_NOT_YET_SPLITKyösti Mälkki
Tree is inconsistent with the use of TCO register space offsets and related preprocessor defines. The legacy space was offset from ACPI PM base by 0x60, but this changed with later platforms. The convenient way is to define the TCO registers relative to its base address and subtract 0x60 here, but this change cannot be easily done tree-wide or in one go. For the transient period, apply TCO_SPACE_NOT_YET_SPLIT flag until all platforms use a clean style of tco_{read,write} accessor functions instead of {read,write}_pmbase16(), or worse, inw/outl(). Change-Id: I16213cdb13f98fccb261004b31e81a9a44cb6e3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-17soc/intel/broadwell: Unselect VBOOT_STARTS_IN_ROMSTAGEYu-Ping Wu
Starting vboot earlier in bootblock instead of romstage is usually preferred (smaller root of trust, among other things). Therefore unselect VBOOT_STARTS_IN_ROMSTAGE for broadwell. Also remove the unused BROADWELL_VBOOT_IN_BOOTBLOCK option. Change-Id: If8feea403ee4cd3a16ed8cb0faf9f4ccb34feaaf Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-17Revert "soc/intel/broadwell: Drop vboot support"Yu-Ping Wu
This reverts commit f87489bbae5bb1ae3b17b6a03af9e309769b1f72. Reason for revert: Broadwell actually supports early flash writes. Change-Id: I342aefe464c72a32b41a40062b62d871caa0707b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-14broadwell: Decouple LPDDR3 DQ/DQS maps from `pei_data`Angel Pons
Introduce the `BROADWELL_LPDDR3` Kconfig option along with some wrapper code to allow mainboards using LPDDR3 DRAM to supply the DQ/DQS maps to chipset code without having to use `pei_data`. The only mainboard using LPDDR3 is Google Samus. Change-Id: I0aaf0ace243c03600430c2a7ab6389a7b20cb432 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55812 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-14soc/intel/broadwell: Drop vboot supportYu-Ping Wu
There is an ongoing effort to deprecate VBOOT_VBNV_CMOS, and replace it with VBOOT_VBNV_FLASH [1]. Since SOC_INTEL_BROADWELL doesn't support flash writes in early stages (BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES), drop vboot as well as ChromeOS support for all broadwell boards, including auron, jecht and wtm2. [1] https://issuetracker.google.com/issues/235293589 BUG=b:235293589 TEST=./util/abuild/abuild -t GOOGLE_GUADO -a TEST=./util/abuild/abuild -t GOOGLE_BUDDY -a Change-Id: I002ab0f5f281c098afba16ada3621f1539c66d6b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-29soc/{amd/stoneyridge,intel}: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. intel/apl is an exception since the bootblock size is limited to 32K. Change-Id: I5e02961183b5bcc37365458a3b10342e5bc2b525 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-05src/soc to src/superio: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16cpu/intel/haswell: Select `HAVE_DISPLAY_MTRRS`Angel Pons
This option is valid for Broadwell as well as Haswell. Change-Id: I4f1e9663806bae279f6aca36f09a0c989c12e507 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16soc/intel/broadwell: Separate PCH KconfigAngel Pons
Split up PCH Kconfig into a separate file. While we're at it, also sort selected options alphabetically. Tested with BUILD_TIMELESS=1, coreboot.rom for the Purism Librem 13 v1 remains identical when not adding the .config file in it. Change-Id: Ic3ff982e7108bf2d25a22e56ac2fbb93070df164 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-14soc/intel/broadwell/pch: Drop device NVS remaindersAngel Pons
Now that device NVS is no longer used as such, stop using it to store ACPI device settings consumed by the SSDT generator. Instead, provide the get_acpi_device_state() function to allow saving ACPI device BARs and activation state from other compilation units. Also, introduce an enum and a struct to ease handling device state. Tested on out-of-tree Compal LA-A992P, SerialIO SSDT does not change. Change-Id: I9e70bf71e808651cb504399dcee489a4d1a70e67 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52521 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14soc/intel/broadwell: Re-do SerialIO UART console supportAngel Pons
Use the same code from Lynx Point on Broadwell, and adjust as needed. Also add a config file to ensure the code gets build-tested. Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works. Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-22soc/intel/broadwell: Use Lynx Point hda_verb.cAngel Pons
This allows dropping the SOC_INTEL_COMMON selection. Pull in the options selected by SOC_INTEL_COMMON into Broadwell Kconfig as they still apply. Change-Id: I0dd7de5358667240b0b3c1a550ba373a2a5af7d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-16vc/google/chromeos: Always use CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
Always allocate RAMOOPS from CBMEM and drop the related static variable CHROMEOS_RAMOOPS_RAM_START. Change-Id: Icfcf2991cb78cc6e9becba14cac77a04d8ada56a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50608 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16soc/inteL/broadwell: Move select CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
With this selected, chromeos_reserve_ram_oops() is a no-op. Change-Id: I2f3b7b3c4a9549a14f2ba039c769546f9698409a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-10soc/intel/broadwell: Use common MADT codeAngel Pons
Save for some cosmetic differences, the code is equivalent. Change-Id: I48d4b522009eee9053d247217ca03d8bfea80cdf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-07soc/intel/broadwell: Use common {DMI,EP,MCH}BAR accessorsAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I04dbeade44d480301c9f7d336449bc54e56cb7bc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50169 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06soc/intel/broadwell: Conditionally skip PRE_GRAPHICS_DELAYKyösti Mälkki
It was commented that the need for the delay was mainly related to external displays and only with VBIOS execution. Move the delay such that it is done only when we actually need to execute the VBIOS aka option rom. A delay is currently only defined for librem/purism_bdw in its Kconfig. As the description of the issue sounds like it would equally happen on other platforms when VBIOS is involved, promote the Kconfig visible option to global scope. Change-Id: I4503158576f35057373f003586bbf76af4d59b3d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-30soc/intel/broadwell: Define and use MMCONF_BUS_NUMBERAngel Pons
Note that ACPI MCFG generation reported too many busses. Change-Id: I5acd26bac675cc818df46f60887f90b76f4580a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50034 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-27ACPI: Separate device_nvs_tKyösti Mälkki
Remove typedef device_nvs_t and move struct device_nvs outside of global_nvs. Also remove padding and the reserve for chromeos_acpi_t. Change-Id: I878746b1f0f9152a27dc58e373d58115e2dff22c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-24soc/intel/broadwell: Select CPU_INTEL_HASWELLAngel Pons
This allows us to drop many now-redundant Kconfig options. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. The default configuration file also remains identical, as expected. Change-Id: I20b0200550508679bf2533342ce918b221dcf81e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24soc/intel/broadwell: Allow to use Haswell CPU code insteadAngel Pons
This allows individual boards to be adapted to use Haswell CPU code. Also rename the CPU_SPECIFIC_OPTIONS symbol to avoid any collisions. Change-Id: I65e878dacf0a0d53fd8d4defce6684f4ceb92588 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46944 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Select INTEL_LYNXPOINT_LPAngel Pons
This allows the correct Haswell and Lynxpoint code to be used. Change-Id: Icbfc5bb11b1ea755a143fa340a3971376f4e5e91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46958 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/broadwell: Move MAX_CPUS from mb to SoCFelix Singer
All Broadwell boards use 8 for MAX_CPUS, so this option can be factored out into SoC Kconfig. Change-Id: I311b95ea75a7c6b76b32c7197a0cec86db644234 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03Revert "broadwell: Switch to using common ACPI _SWS code"Angel Pons
This reverts commit 81a4c85acf664156bb68807f681cd40928bf8267. Reason for revert: Blocks merging Haswell and Broadwell together. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I29c4ad9174ab84c7e9111daa0491ede9e1d639b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46734 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30Revert "broadwell: update processor power limits configuration"Angel Pons
This reverts commit fa42d568a00e5daadd35722790c529539227130e. Reason for revert: Passes in an incompatible structure and only happens to boot by chance. Moreover, Broadwell will soon be merged with Haswell and this requires Broadwell to not depend on any Intel common SoC code. Tested on out-of-tree Acer Aspire E5-573, PL values are correct again. Change-Id: I6e8e000dba8ff09fab4e6f174ab703348dcd6a96 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45011 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23soc/intel/broadwell: Use common early SMBus codeAngel Pons
Disabling interrupts and clearing errors was being done twice, once in the `smbus_enable_iobar` reg-script, and another in `enable_smbus`. Change-Id: I58558996bd693b302764965a5bed8b96db363833 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-13src: Rename EM100Pro-specific SPI console Kconfig optionAngel Pons
To avoid confusion with `flashconsole` (CONSOLE_SPI_FLASH), prefix this option with `EM100Pro`. Looks like it is not build-tested, however. Change-Id: I4868fa52250fbbf43e328dfd12e0e48fc58c4234 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-02drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES configShelley Chen
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't allow writing to SPI flash when early stages are running XIP from flash. If BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected, BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms that write to flash in the earlier stages, assuming that they have that capability. BUG=b:150502246 BRANCH=None TEST=diff the coreboot.rom files resulting from running ./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless with and without this change to make sure that there was no difference. Also did this for GOOGLE_CANDY board, which is baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES enabled). Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-26arch/x86: Introduce `ARCH_ALL_STAGES_X86_32`Angel Pons
Nearly every x86 platform uses the same arch for all stages. The only exception is Picasso. So, factor out redundant symbols from the rest. Alder Lake is not yet complete, so it has been skipped for now. Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-26cpu,soc/intel: Drop select SMPKyösti Mälkki
Implicitly selected with MAX_CPUS != 1. Change-Id: I4ac3e30e9f96cd52244b4bae73bafce0564d41e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-15arch/x86: Remove NO_FIXED_XIP_ROM_SIZEKyösti Mälkki
The variable SETUP_XIP_CACHE provides us a working alternative. Change-Id: I6e3befedbbc7967b71409640dc81a0c2a9b3e511 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-10ACPI: Remove Kconfig COMMON_FADTKyösti Mälkki
Also remove default mb/*/fadt.c from Makefiles. Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07soc/intel/baytrail,braswell,broadwell,quark: Select COMMON_FADTKyösti Mälkki
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE so their FADT preffered_pm_profile would change from PM_MOBILE without the added overrides here. Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18broadwell: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Broadwell SoC based platforms. BRANCH=None BUG=None TEST=Build for broadwell based platform Change-Id: I97e38a533e74a122b6809e20a10f6e425827ab9c Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-01-09soc/intel/broadwell: Drop old forked version of SMBUS supportKyösti Mälkki
Switch to use the more recent version in sb/intel/common. Change-Id: Icbd54b5671ea2a94aea5db4642698ef679540625 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-19arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHEKyösti Mälkki
If stage cache is enabled, we should not allow S3 resume to load firmware from non-volatile memory. This also adds board reset for failing to load postcar from stage cache. Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-26sb/intel/common/spi: Add Baytrail/Braswell supportArthur Heymans
The mechanism for getting the SPIBAR is little different. Tested on Intel Minnowboard Turbot. Change-Id: Ib14f185eab8bf708ad82b06c7a7ce586744318fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-25Kconfig: Drop the C_ENVIRONMENT_BOOTBLOCK symbolArthur Heymans
The romcc bootblock will be deprecated soon and most platforms use C_ENVIRONMENT_BOOTBLOCK already. This patch drops the CONFIG_C_ENVIRONMENT_BOOTBLOCK symbol and adds CONFIG_ROMCC_BOOTBLOCK where needed. Change-Id: I773a76aade623303b7cd95ebe9b0411e5a7ecbaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-11-10soc/intel/broadwell: Use common INTEL_SB SPI codeArthur Heymans
Change-Id: Id906733ac3719c8d6835aad52ca87beb81b5771d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-10soc/intel/broadwell: Use common SB RTC codeArthur Heymans
Change-Id: Iedb9a8962ac1b4107e9192b0be610fb92d2cfdc6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-03intel/broadwell: Switch to TSC_MONOTONIC_TIMERKyösti Mälkki
Change-Id: I01b73e20c8af1b00175dc6d9ee56e6b33ac5768d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36537 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-03cpu/x86/tsc: Flip and rename TSC_CONSTANT_RATE to UNKNOWN_TSC_RATEKyösti Mälkki
The x86 timers are a bit of a mess. Cases where different stages use different counters and timestamps use different counters from udelays. The original intention was to only flip TSC_CONSTANT_RATE Kconfig to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those counters do run with a constant rate but we just lack tsc_freq_mhz() implementation for three platforms. Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a slow run of calibrate_tsc_with_pit(). This is easy enough to fix with followup implementation of tsc_freq_mhz() for the platforms. Implementations with LAPIC_MONOTONIC_TIMER typically will not have tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However, as they don't use TSC for udelay() the slow calibrate_tsc_with_pit() is avoided. Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900 claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch that romstage to use UDELAY_TSC. Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-11arch/x86: Flip option NO_CAR_GLOBAL_MIGRATIONKyösti Mälkki
It is easier to track CAR_GLOBAL_MIGRATION which is the approach to be deprecated with the next release. This change enforces new policy; POSTCAR_STAGE=y is not allowed together with CAR_GLOBAL_MIGRATION=y. Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-11arch/x86: Enable POSTCAR_CONSOLE by defaultKyösti Mälkki
Almost all platforms force it on. Make it enabled by default but under user control to optionally disable it. Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-08lib/stage_cache: Refactor Kconfig optionsKyösti Mälkki
Add explicit CBMEM_STAGE_CACHE option. Rename CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE. Platforms with SMM_TSEG=y always need to implement stage_cache_external_region(). It is allowed to return with a region of size 0 to effectively disable the cache. There are no provisions in Kconfig to degrade from TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE. As a security measure CBMEM_STAGE_CACHE default is changed to disabled. AGESA platforms without TSEG will experience slower S3 resume speed unless they explicitly select the option. Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-09arch/x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Change-Id: Id56139a3d0840684b13179821a77bc8ae28e05ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09cpu/x86: Flip SMM_TSEG defaultKyösti Mälkki
This is only a qualifier between TSEG and ASEG. Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-28{soc,northbridge}/Kconfig: Remove unused CACHE_MRC_SIZE_KBElyes HAOUAS
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-15soc/intel/broadwell: Enable LPC/SIO setup in bootblockArthur Heymans
This allows for serial console during the bootblock and enables bootblock console by default. Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-15nb/intel/broadwell: Add an option for where verstage startsArthur Heymans
Previously broadwell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. With a separate verstage the romstage becomes an RW stage. The mrc.bin however is only added to the RO COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I900233cadb3c76da329fb98f93917570e633365f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Use C_ENVIRONMENT_BOOTBLOCKArthur Heymans
This puts the cache-as-ram init in the bootblock. Before setting up cache as ram the microcode updates are applied. This removes the possibility for a normal/fallback setup although implementing this should be quite easy. Setting up LPC in the bootblock to output console on SuperIOs is not done in this patch, therefore BOOTBLOCK_CONSOLE is not yet selected. Change-Id: I44eb6d380dea5b82e3f009a46381a0f611bb7935 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-25cpu/intel/car/non-evict: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
CPU's featuring a non eviction mode cache the whole ROM. Therefore XIP stages don't need to follow some alignment constraints. Change-Id: I4a30f31baa0f90279c0690ceb6aefea6de461bd9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-04-01vboot: Select CONFIG_VBOOT_OPROM_MATTERS in more casesJulius Werner
This patch enables CONFIG_VBOOT_OPROM_MATTERS in a few more cases where I think(?) it should be. Haswell, Broadwell and Baytrail Chromebooks have this enabled in their old depthcharge firmware branches -- we presumably just forgot to move it over when vboot2 migrated the option to coreboot. Braswell didn't, but it seems like this requirement was added when it was migrated to FSP 1.1...? (Not very sure about that one, but it does call load_vbt() right now which executes things based on display_init_required().) Additionally, it seems to make sense to enable it whenever the user explicitly selects VGA_ROM_RUN in menuconfig (like one of the Intel defconfigs does). Once we have all this, one could take a step back and ask whether this option still makes sense at all anymore. It's enabled for almost all devices (that work with vboot at all), it will presumably be enabled for all future devices, and it seems that most devices that don't enable it use libgfxinit, which as far as I can tell isn't gated on display_init_required() but probably should be. Realistically, whatever kind of display init a board needs to do (native or option ROM), it's probably expensive enough that it's worth skipping on a normal mode vboot boot, and we'd want to have this enabled by default on everything except boards that actually don't have a display. So maybe we should flip it around to CONFIG_VBOOT_OPROM_DOESNT_MATTER, but doing that would probably lead to nobody ever selecting it at all. Not sure what the best solution there is yet, but I think this patch at least moves things in the more correct direction. Change-Id: Id96a88296ddb9cfbb58ea67d93e1638d95570e2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-30arch/x86: Use a common timestamp.inc with romcc bootblocksKyösti Mälkki
The same file was replicated three times for certain soc/intel bootblocks, yet there are no indications or need to do chipset-specific initialisation. There is no harm in storing the TSC values in MMX registers even when they would not be used. Change-Id: Iec6fa0889f5887effca1d99ef830d383fb733648 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-24soc/intel/*: Select SUPPORT_CPU_UCODE_IN_CBFS only onceArthur Heymans
This was selected twice. Change-Id: I7e20b7d3f05ecae98db1addf5aea7bf1159f4682 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-05soc/intel/broadwell: Implement postcar stageArthur Heymans
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-16soc/intel/{broadwell,skylake}: Remove unused SERIAL_CPU_INITElyes HAOUAS
Change-Id: I2296ab3c53a82ee990649e35e1370e1dd304e392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-22intel: Use CF9 reset (part 1)Patrick Rudolph
Add SOUTHBRIDGE_INTEL_COMMON_RESET for all Intel platforms that used to perform a "system reset" in their hard_reset() implementation. Replace all duplicate CF9 reset implementations for these platforms. Change-Id: I8e359b0c4d5a1060edd0940d24c2f78dfed8a590 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-13src/*/intel/: clarify Kconfig options regarding IFDStefan Tauner
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid Inter Flash Descriptor to exist. It does *not* identify platforms or boards that are capable of running in descriptor mode if it's valid. Refine the help text to make this clear. Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply declare that IFD is supported by the platform. Select this value everywhere instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected. Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to the mainboard directory. Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-13soc/intel/broadwell/Kconfig: Clean up redefined config optionsArthur Heymans
All broadwell board set HAVE_IFD_BIN to default n, overloading the option in soc, therefore just use the defaults in sb/intel/common/firmware. Change-Id: I250dbbc9d61ecedc1a1eb48751ad966732604349 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28011 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06arch/x86: Make RELOCATABLE_RAMSTAGE the defaultKyösti Mälkki
No need to provide an option to try disable this. Also remove explicit ´select RELOCATABLE_MODULES' lines from platform Kconfigs. Change-Id: I5fb169f90331ce37b4113378405323ec856d6fee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08intel/broadwell: Add option to enable/disable the PCIe AER capabilityYouness Alaoui
The Advanced Error Reporting capability was hardcoded in the PCIe extended capability list, but it might not always be possible. The Librem 13v1 does not seem to have working AER and this option was needed and tested on the Librem 13v1. Without it, the linux console gets spammed with AER errrors. Change-Id: If2e0ec42c93f1fee927eacdf0099004cf9302fbe Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-15soc/intel/broadwell: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Haswell/Lynxpoint code. Test: boot Windows 10 on google/lulu with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: I024f4f0784df3cbbb9977692e9ef0ff9c3552725 Signed-off-by: CoolStar <coolstarorganization@gmail.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-12-17soc/intel/broadwell: remove CACHE_MRC_SETTINGS optionAaron Durbin
The CPU_SPECIFIC_OPTIONS already auto-selects the option. There's no point in having a selectable option that is already selected. There's already an option to select it within intel/common. BUG=b:69614064 Change-Id: I0c7ce7d3f344668587a75ec683343559a4caea99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-07usbdebug: Remove redundant setupKyösti Mälkki
Taking ownership is handled with DBGP_OWNER within usbdebug driver code. Change-Id: Ia5da10d385cda1b4968f812967ea8a54d7e3c974 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian <david.guckian@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-09soc/broadwell: Allow disabling of PCIe ASPM optionsYouness Alaoui
The ASPM options (L1 substates, CLKREQ support, Common Clock and ASPM) are hardcoded for broadwell chips, but some boards may not support these ASPM options even if the SoC does support it (non-wired CLKREQ pin for example). This is required to disable L1 substates on the Purism/Librem 13 which seems to have issues with NVMe drives falling into L1.2 state and not being able to exit that state. Change-Id: I2c7173af1d482cccdc784e3fa44ecbb5d38ddc34 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20Revert "intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & Tiano"Matt DeVillier
We've been able to narrow down the problem to a single register/ single bit, so revert this commit and address the problem in a follow-on commit. This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db. Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18384 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-27cpu/intel/common: Add/Use common function to set virtualizationMatt DeVillier
Migrate duplicated enable_vmx() method from multiple CPUs to common folder. Add common virtualization option for CPUs which support it. Note that this changes the default to enable virtualization on CPUs that support it. Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17874 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08intel car: Remove references to DCACHE_RAM_ROMSTACK_SIZEKyösti Mälkki
Not referenced in code. Change-Id: Iea91f4418eb122fb647ec0f4f42cb786e8eadf23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17268 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-02intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & TianoPrabal Saha
Without this patch, eDP output is non-functional pre-graphics driver regardless of payload (SeaBIOS, Tianocore) or video init method (VBIOS, GOP driver) and once the standard Windows Intel HD graphics driver is loaded. Test: Boot Windows on peppy and auron_paine, install Intel HD Graphics driver, observe functional eDP output with full video acceleration. Debugging method: adjust location of call to run VBIOS within coreboot, observed that eDP output functional if the VBIOS is run before the power optimizer lines, broken if run afterwards. Change-Id: I6d8252e3de396887c84533e355f41693b9ea7514 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15261 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-15soc/intel/broadwell: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: I99d909ee72c3abebb1e9c8ebf44137465264bf0d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15673 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-04cpu/x86: remove BACKUP_DEFAULT_SMM_REGION optionAaron Durbin
Unconditionally provide the backup default SMM area API. There's no reason to guard the symbols behind anything since linker garbage collection is implemented. A board or chipset is free to use the code or not without needing to select an option. Change-Id: I14cf1318136a17f48ba5ae119507918190e25387 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14561 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-05Add EM100 'hyper term' spi console support in ramstage & smmMartin Roth
The EM100Pro allows the debug console to be sent over the SPI bus. This is not yet working in romstage due to the use of static variables in the SPI driver code. It is also not working on chipsets that have SPI write buffers of less than 10 characters due to the 9 byte command/header length specified by the EM100 protocol. While this currently works only with the EM100, it seems like it would be useful on any logic analyzer with SPI debug - just filter on command bytes of 0x11. Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-09-17broadwell: Switch to using common ACPI _SWS codeDuncan Laurie
Use the common ACPI _SWS code and provide a function to fill out the wake source data. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-samus coreboot Change-Id: I3d2ceca8585314122b78317acb7f848efb6e9a14 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d8afaee8e27222639c5e249d53be28cddcb78f72 Original-Change-Id: Ie551ecf3397c304216046cc2046c071f7b766e5f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298168 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11647 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-16Move final Intel chipsets with ME to intel/common/firmwareMartin Roth
This switches the final 4 Intel platforms that use ME firmware from using code specific to the platform to the common IFD Kconfig and Makefile. braswell, broadwell, bd82x6x (cougar point & panther point) and ibexpeak Change-Id: Id3bec6dbe2e1a8a90f51d9378150dbb44258b596 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10876 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
The build system was previously determining the flow and linking scripts bootblock code by the order of files added to the bootblock_inc bootblock-y variables.Those files were then concatenated together and built by a myriad of make rules. Now bootblock.S and bootblock.ld is added so that bootblock can be built and linked using the default build rules. CHIPSET_BOOTBLOCK_INCLUDE is introduced in order to allow the chipset code to place include files in the path of the bootblock program -- a replacement for the chipset_bootblock_inc make variable. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built vortex, rambi, and some asus boards. Change-Id: Ida4571cbe6eed65e77ade98b8d9ad056353c53f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11495 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-31soc/intel: Fix dependency of CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEMAlexandru Gagniuc
This depends on RELOCATABLE_RAMSTAGE, and shouldn't be selected if its dependency is not activated. Change-Id: I8e7efc3f87e105715fe3377ed306891f0d209979 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11473 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether or not the payload will actually be SeaBIOS: 1. PAYLOAD_SEABIOS, but payload changed with cbfstool 2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS et. cetera. Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11293 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2015-08-25Intel: Remove CACHE_MRC_BIN - 'selected' everywhere in KconfigMartin Roth
The Kconfig symbol CACHE_MRC_BIN was getting forced enabled everywhere it existed. Remove the Kconfig symbol and get rid of the #if statements surrounding the code. This fixes the Kconfig warning for Haswell & Broadwell chips: warning: (NORTHBRIDGE_INTEL_HASWELL && NORTHBRIDGE_INTEL_SANDYBRIDGE && NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE && NORTHBRIDGE_INTEL_IVYBRIDGE && NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE && CPU_SPECIFIC_OPTIONS) selects CACHE_MRC_BIN which has unmet direct dependencies (CPU_INTEL_SOCKET_RPGA988B || CPU_INTEL_SOCKET_RPGA989) Change-Id: Ie0f0726e3d6f217e2cb3be73034405081ce0735a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11270 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-04Kconfig: Fix references to obsolete symbolsMartin Roth
These are all Kconfig symbols that have been removed or renamed. USE_PRINTK_IN_CAR was removed in commit 8c4f31b3 Drop the USE_PRINTK_IN_CAR option. It's a bogus decision... DYNAMIC_CBMEM was removed in commit e2b0affd Remove Kconfig variable that has no effect MAINBOARD_HAS_BOOTBLOCK_INIT was removed in commit 342535cc Remove Kconfig variable that has no effect CACHE_ROM was removed in commit 4337020b Remove CACHE_ROM. SMM_MODULES was removed in commit 44cbe10f smm: Merge configs SMM_MODULES and SMM_TSEG INCLUDE_MICROCODE_IN_BUILD was removed in commit eb73a218 soc/fsp_baytrail: Fix use of microcode-related Kconfig variables CAR_MIGRATION was removed in commit cbf5bdfe CBMEM: Always select CAR_MIGRATION REQUIRES_BLOB was removed in commit 70c85eab build system: Retire REQUIRES_BLOB CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit 66e0c4c8 - cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS CONSOLE_SERIAL_UART was renamed to CONSOLE_SERIAL in commit afa7b13b uart: Redefine Kconfig options CONSOLE_SERIAL8250MEM was renamed to DRIVERS_UART_8250MEM in commit afa7b13b - uart: Redefine Kconfig options Change-Id: I8952ca8c53ac2e6cec5f9c77d2f413f086bfab9d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10766 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-24Kconfig: Get rid of obsolete symbolsMartin Roth
CAR_MIGRATION was removed in commit: cbf5bdfe - CBMEM: Always select CAR_MIGRATION ALT_CBFS_LOAD_PAYLOAD was removed in commit: cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD MARK_GRAPHICS_MEM_WRCOMB was removed in commit: 30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB. EXTERNAL_MRC_BLOB was removed in commit: 0aede118 - Drop unused EXTERNAL_MRC_BLOB CACHE_ROM is only in Google's codebase. LID_SWITCH is only in Google's codebase. DEFAULT_POST_DEVICE_LPC is only in Sage's codebase. ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used. HUDSON_NOT_LEGACY_FREE never existed as far as I can tell. MAINBOARD_DO_EDID never existed as far as I can tell. Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10616 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
The CBFS size is really mainboard specific, since it really depends on size of the chip on the mainboard, so it makes sense to have it in the mainboard menu along with the ROM-chip size. - Move the CBFS_SIZE definition up in src/kconfig - Move the Mainboard Menu markers out of src/mainboard/kconfig into src/Kconfig so CBFS_SIZE can live in the mainboard menu. - Add a long list setting default values to do what the chipset directories were previously defaulting the values to. This will be trimmed down in a following patch that creates a common set of IFD routines. (Who knew that kconfig supported line wrapping?) - Update the help text. Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10610 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23intel/broadwell: Fix refcode handlingPatrick Georgi
Allow adding and executing a refcode binary. Change-Id: I00e91a088a5695b42528e246d0ed642d988603e3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/10638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-22Remove incorrect Kconfig expressionsMartin Roth
The symbols used in these expressions were not correct and would never evaluate as true. Change-Id: Ia20177f41505473b14bc7b8e4b6fb16de36cc295 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10437 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-21Remove old HAVE_UART_MEMORY_MAPPED select statementsMartin Roth
The HAVE_UART_MEMORY_MAPPED symbol is no longer present, so these don't actually select anything. Change-Id: I6d0eb610e48a4506ac7449ac677ee67981d0ff0d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10608 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-29chromeos: always enable timestampsStefan Reinauer
Timestamps should not be forced on by a subset of chipsets. However, they are a requirement on Chrome OS platforms, so have CONFIG_CHROMEOS select it. Change-Id: I408c6b17aa8721a3abec69020084174e414a8940 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/10357 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG Remove some newly dead code while on it. Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10355 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 17:07:11 +0000