summaryrefslogtreecommitdiff
path: root/src/soc/intel/baytrail
AgeCommit message (Expand)Author
2015-06-24Kconfig: Get rid of obsolete symbolsMartin Roth
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
2015-06-09stage_cache: use cbmem init hooksAaron Durbin
2015-06-09cbmem: add indicator to hooks if cbmem is being recoveredAaron Durbin
2015-06-09cbmem: Unify CBMEM init tasks with CBMEM_INIT_HOOK() APIKyösti Mälkki
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
2015-06-02assets: abstract away the firmware assets used for bootingAaron Durbin
2015-06-02cbfs: new API and better program loadingAaron Durbin
2015-05-29chromeos: always enable timestampsStefan Reinauer
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
2015-05-27Move TPM code out of chromeosVladimir Serbinenko
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-13baytrail: broadwell: correct refcode loadingAaron Durbin
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
2015-05-053rdparty: Move to blobsPatrick Georgi
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
2015-04-30kbuild: Don't require intel/common changes for every socStefan Reinauer
2015-04-29kbuild: automatically include SOCsStefan Reinauer
2015-04-22coreboot: common stage cacheAaron Durbin
2015-04-15soc/baytrail: Use microcode from the blobs repositoryMarc Jones
2015-04-10baytrail: correct NC pin to GPO pin according to BYT platform design guideKane Chen
2015-04-10baytrail: add code for supporting 2x ddr refresh rateKane Chen
2015-04-10baytrail: fix the coding error on PCIe L1 exit latencyKevin L Lee
2015-04-10Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 msKevin Hsieh
2015-04-10baytrail: Switch from ACPI mode to PCI mode for legacy supportMarc Jones
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-06baytrail: Fix hdmi audio choppy issueKein Yuan
2015-04-06baytrail: reinitialize spi controller in SMM finalizationAaron Durbin
2015-04-04Baytrail: Fix no_dev_behind_port not executed for RP1/2/3.Kenji Chen
2015-04-03rmodule: use struct prog while loading rmodulesAaron Durbin
2015-04-02baytrail: Change USB3 PLL VCO and iCLK PLL current on BYT-M/D CPUKein Yuan
2015-04-02Baytrail: Change PCIe root disable algorithmKenji Chen
2015-04-02Baytrail: add _PRT to each PCIe root port deviceTed Kuo
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
2015-03-30baytrail: fix HAVE_REFCODE_BLOB build errorsAaron Durbin
2015-03-30Update hex values to CBFS binary name types in MakefilesMartin Roth
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
2015-03-10ACPI: Get S3 resume state from romstage_handoffKyösti Mälkki
2015-03-09coreboot: fix munged license textAaron Durbin
2015-02-25soc/intel/baytrail/Kconfig: Remove explicit `HAVE_MONOTONIC_TIMER`Paul Menzel
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
2015-01-27vboot2: add verstageStefan Reinauer
2015-01-16baytrail: there is a chance that USBPHY_COMPBG is set to 0Kane Chen
2015-01-16baytrail: use the setting in devicetree.cb to config USBPHY_COMPBGKane Chen
2015-01-14baytrail broadwell: Use timestamps internal stashKyösti Mälkki
2015-01-05timestamps: Switch from tsc_t to uint64_tStefan Reinauer
2014-12-31baytrail: add more gpio init macrosKane Chen
2014-12-30baytrail: Add defines and functions for GPNCOREKein Yuan
2014-12-28intel baytrail broadwell: Include microcode updatesKyösti Mälkki
2014-12-19baytrail SOCs: Add missing comma in gpio.hMartin Roth
2014-12-17baytrail: initialize backlight PWM frequencyAaron Durbin
2014-12-17x86: Initialize SPI controller explicitly during PCH initDavid Hendricks
2014-12-09spi: Eliminate the spi_cs_activate and spi_cs_deactivate functions.Gabe Black
2014-12-09spi: Remove the spi_set_speed and spi_cs_is_valid functions.Gabe Black
2014-12-08intel/baytrail: Spelling fixesMartin Roth
2014-12-02Replace hlt with halt()Patrick Georgi
2014-11-30Replace hlt() loops with halt()Patrick Georgi
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
2014-11-18baytrail: fix range checkPatrick Georgi
2014-11-13intel: use crosscompiler readelf, instead of globalPatrick Georgi
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-11-01{cpu,soc}: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
2014-10-28baytrail: gfx: Don't configure hotplug + backlight registersShawn Nematbakhsh
2014-10-28Baytrail/dptf: Always return 0 in TCPU._PPCKein Yuan
2014-10-28baytrail: handle MRC being an ELF fileAaron Durbin
2014-10-28baytrail: Configure MSR for 2-core and 4-core P-state configutationDuncan Laurie
2014-10-28baytrail: move cache-as-ram base address to 0xfe000000Aaron Durbin
2014-10-28baytrail: romstage: Add function to check SW WP status for vbootShawn Nematbakhsh
2014-10-22reg_script: default to n for ARCH_X86Isaac Christensen
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
2014-10-22baytrail: Move HDA verb table to Intel SOC common directoryDuncan Laurie
2014-10-22baytrail: Move MRC cache code to a common directoryDuncan Laurie
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
2014-10-19x86 romstage: Move stack just below RAMTOPKyösti Mälkki
2014-10-19haswell baytrail: Enable RELOCATABLE_RAMSTAGEKyösti Mälkki
2014-10-14baytrail: Add padding to the end of device_nvs to match ACPIScott Radcliffe
2014-10-01baytrail: update C0 microcodeShawn Nematbakhsh
2014-09-24baytrail: add 80c microcode for C0 partsAaron Durbin
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
2014-08-28soc/intel/baytrail/Kconfig: Remove empty line at top filePaul Menzel
2014-08-15Move baytrail-specific config to baytrail.Vladimir Serbinenko
2014-07-23src/.../Kconfig: various small fixes to textsDaniele Forsi
2014-07-17soc,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-14SPI: Split writes using spi_crop_chunk()Kyösti Mälkki
2014-07-08soc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 08:47:34 +0000