Age | Commit message (Expand) | Author |
2014-11-18 | baytrail: fix range check | Patrick Georgi |
2014-11-13 | intel: use crosscompiler readelf, instead of global | Patrick Georgi |
2014-11-09 | src: Too many terminators ';;' at end of stmts, stop Skynet | Edward O'Callaghan |
2014-11-01 | {cpu,soc}: Use DEVICE_NOOP macro over dummy symbol | Edward O'Callaghan |
2014-10-28 | baytrail: Remove unused devicetree fields | Shawn Nematbakhsh |
2014-10-28 | baytrail: gfx: Don't configure hotplug + backlight registers | Shawn Nematbakhsh |
2014-10-28 | Baytrail/dptf: Always return 0 in TCPU._PPC | Kein Yuan |
2014-10-28 | baytrail: handle MRC being an ELF file | Aaron Durbin |
2014-10-28 | baytrail: Configure MSR for 2-core and 4-core P-state configutation | Duncan Laurie |
2014-10-28 | baytrail: move cache-as-ram base address to 0xfe000000 | Aaron Durbin |
2014-10-28 | baytrail: romstage: Add function to check SW WP status for vboot | Shawn Nematbakhsh |
2014-10-22 | reg_script: default to n for ARCH_X86 | Isaac Christensen |
2014-10-22 | cmos: Rename the CMOS related functions. | Gabe Black |
2014-10-22 | baytrail: Move HDA verb table to Intel SOC common directory | Duncan Laurie |
2014-10-22 | baytrail: Move MRC cache code to a common directory | Duncan Laurie |
2014-10-22 | baytrail/rambi: S3 support and other updates | Kein Yuan |
2014-10-19 | x86 romstage: Move stack just below RAMTOP | Kyösti Mälkki |
2014-10-19 | haswell baytrail: Enable RELOCATABLE_RAMSTAGE | Kyösti Mälkki |
2014-10-14 | baytrail: Add padding to the end of device_nvs to match ACPI | Scott Radcliffe |
2014-10-01 | baytrail: update C0 microcode | Shawn Nematbakhsh |
2014-09-24 | baytrail: add 80c microcode for C0 parts | Aaron Durbin |
2014-09-19 | baytrail/rambi: spi, charger, and audio updates | Aaron Durbin |
2014-09-18 | rambi/baytrail: ACPI, GPIO, audio, misc updates | Shawn Nematbakhsh |
2014-08-28 | soc/intel/baytrail/Kconfig: Remove empty line at top file | Paul Menzel |
2014-08-15 | Move baytrail-specific config to baytrail. | Vladimir Serbinenko |
2014-07-23 | src/.../Kconfig: various small fixes to texts | Daniele Forsi |
2014-07-17 | soc,ASL: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-14 | SPI: Split writes using spi_crop_chunk() | Kyösti Mälkki |
2014-07-08 | soc: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-05 | spi: Change spi_xfer to work in units of bytes instead of bits. | Gabe Black |
2014-07-05 | spi: Remove unused parameters from spi_flash_probe and setup_spi_slave. | Gabe Black |
2014-06-21 | intel boards: Use acpi_is_wakeup_s3() | Kyösti Mälkki |
2014-06-18 | ACPI: Remove CBMEM TOC from GNVS | Kyösti Mälkki |
2014-05-17 | build: separate CPPFLAGS from CFLAGS | Patrick Georgi |
2014-05-17 | build: CPPFLAGS is more common than INCLUDES | Patrick Georgi |
2014-05-15 | baytrail: Add SOC thermal settings | Duncan Laurie |
2014-05-15 | baytrail: Enable PCIe common clock and ASPM | Duncan Laurie |
2014-05-15 | baytrail: enable graphics turbo | Aaron Durbin |
2014-05-15 | baytrail: use CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED | Aaron Durbin |
2014-05-15 | baytrail: Add ACPI Device for XHCI | Duncan Laurie |
2014-05-15 | baytrail: nvm: use proper types for checking erase | Aaron Durbin |
2014-05-15 | baytrail: mrc_cache: check region erased before erasing | Aaron Durbin |
2014-05-13 | baytrail: add C0 microcode update | Aaron Durbin |
2014-05-13 | baytrail: reboot with EC in S0 with no MRC cache and EC in RW | Aaron Durbin |
2014-05-13 | baytrail: dptf: Add disable trip point methods | Duncan Laurie |
2014-05-13 | baytrail: Updates for DPTF ACPI framework | Duncan Laurie |
2014-05-13 | baytrail: don't SMI on tco timer firing | Aaron Durbin |
2014-05-13 | baytrail: clear the pmc wake status registers | Aaron Durbin |
2014-05-13 | baytrail: log reset, power, and wake events in elog | Aaron Durbin |
2014-05-13 | baytrail: snapshot power state in romstage | Aaron Durbin |
2014-05-13 | baytrail: add cpuid for C0 | Aaron Durbin |
2014-05-12 | baytrail: align with intel recommendations | Aaron Durbin |
2014-05-12 | baytrail: add way to load reference code from vboot area | Aaron Durbin |
2014-05-12 | baytrail: Expose IOSF as ACPI object | Duncan Laurie |
2014-05-12 | baytrail: Put devices in ACPI mode after setup | Duncan Laurie |
2014-05-12 | baytrail: Add header include wrapper and offset define | Duncan Laurie |
2014-05-10 | baytrail: cache reference code for S3 resume | Aaron Durbin |
2014-05-10 | baytrail: allow ramstage_cache_location() usage in ramstage | Aaron Durbin |
2014-05-10 | baytrail: note S3 resume status earlier | Aaron Durbin |
2014-05-10 | baytrail: utilize reg_script_run_on_dev() | Aaron Durbin |
2014-05-10 | baytrail: initialize perf/power registers | Aaron Durbin |
2014-05-10 | baytrail: add more iosf access functions | Aaron Durbin |
2014-05-10 | baytrail: remove verbosity in iosf | Aaron Durbin |
2014-05-10 | baytrail: Add support for LPSS and SCC devices in ACPI mode | Duncan Laurie |
2014-05-09 | baytrail: Basic DPTF framework | Duncan Laurie |
2014-05-09 | baytrail: Enable panel and set timings | Duncan Laurie |
2014-05-09 | baytrail: allow SD card controller capabilities overrides | Aaron Durbin |
2014-05-09 | baytrail: fix nvs offsets | Aaron Durbin |
2014-05-09 | baytrail: lpe audio device needs memory for its firmware | Aaron Durbin |
2014-05-08 | baytrail: gpio: Make GPIO inputs MMIO by default | Shawn Nematbakhsh |
2014-05-08 | baytrail: enable lpe resources assigned to device | Aaron Durbin |
2014-05-08 | baytrail: Fix _CRS to build with new IASL | Duncan Laurie |
2014-05-08 | baytrail: add lpe codec clock configuration | Aaron Durbin |
2014-05-08 | baytrail: Add ACPI code to describe GPIO controller | Duncan Laurie |
2014-05-08 | baytrail: Update to microcode 31E and fix C-state table | Duncan Laurie |
2014-05-07 | baytrail: minor style | Patrick Georgi |
2014-05-07 | baytrail: romstage: Add config option to enable RMT | Shawn Nematbakhsh |
2014-05-07 | baytrail: pcie: Root port initialization | Aaron Durbin |
2014-05-07 | baytrail: gpio: Fix NCORE gpio-to-pad LUT | Shawn Nematbakhsh |
2014-05-07 | baytrail: enable caching and prefetching in spi controller | Aaron Durbin |
2014-05-07 | baytrail: fix direct irq pad configuration | Aaron Durbin |
2014-05-07 | baytrail: ensure init_chromeos() is called in romstage | Aaron Durbin |
2014-05-07 | baytrail: don't allow PCIE wake ups | Aaron Durbin |
2014-05-07 | baytrail: gpio: Make pad input/output state mutually exclusive | Shawn Nematbakhsh |
2014-05-07 | baytrail: first pass at lpss device initialization | Aaron Durbin |
2014-05-07 | baytrail: initialize eMMC device | Aaron Durbin |
2014-05-07 | baytrail: initialize common SSC functionality | Aaron Durbin |
2014-05-07 | baytrail: add score and ssc iosf access functions | Aaron Durbin |
2014-05-06 | Introduce stage-specific architecture for coreboot | Furquan Shaikh |
2014-05-06 | baytrail: gpio: Add support for direct / dedicated IRQs | Shawn Nematbakhsh |
2014-05-06 | baytrail: add GPIO SMI support | Aaron Durbin |
2014-05-06 | baytrail: add support for routing gpio pins to smi/sci | Aaron Durbin |
2014-05-06 | baytrail: fix fadt structure for gpe0 block | Aaron Durbin |
2014-05-06 | baytrail: Add microcode/punit release 31a | Duncan Laurie |
2014-05-06 | baytrail: Add ACPI CPU entries | Duncan Laurie |
2014-05-06 | baytrail: Add BCLK and IACORE to pattrs | Duncan Laurie |
2014-05-06 | baytrail: Enable Turbo/Burst and set some magic MSRs | Duncan Laurie |
2014-05-06 | baytrail: include mainboard's superio.asl | Aaron Durbin |
2014-05-06 | baytrail: add more irq defintions | Aaron Durbin |
2014-05-06 | baytrail: configure acpi SCI irq | Aaron Durbin |