Age | Commit message (Collapse) | Author |
|
Previously the only path through memory init and coreboot was
hardcoding S5. Therefore all S3 paths would not be taken. Allow
for S3 resume to work by enabling the proper control paths in
romstage.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=While in kernel 'echo mem > /sys/power/state'. Board went
into S3. Power button press resumed back into kernel.
Change-Id: I3cbae73223f0d71c74eb3d6b7c25d1b32318ab3e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175940
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4943
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This gives us completely transparent low-level function to transmit
data.
Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The elog boot counter in cmos was not being initialized
nor incremented. Start doing that in romstage. Since S3
resume is not detected yet the increment is unconditional.
BUG=None
BRANCH=None
TEST=Built and booted through depthcharge multiple times. Noted
output such as 'Boot Count incremented to 4'.
Change-Id: Ic585d4ad4b3af086e0067e28fe0f35c02979bbd2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174717
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4919
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
- Ungate display in PUNIT
- Set GSM to 64MB since 32MB is not supported in <C0 stepping
- Initialize power management registers in GTT
- Execute VBIOS if found
BUG=chrome-os-partner:23507
BRANCH=rambi
TEST=build and boot to dev screen via HDMI on rambi
Change-Id: Idb032c7ea7f16b651b4c921e3429a652fe663a5d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174922
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4907
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The EC needs to be initialized early in romstage. Therefore
perform the call after console has been initialized in order to
view any messages that the code may spit out.
BUG=chrome-os-partner:23387
BRANCH=None
TEST=Built and booted with recovery mode and EC in RW. Noted that
system reboots the EC.
Change-Id: I35aa3ea4aa3dbd9bd806b6498e227f45ceebd7a1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174713
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4904
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Initialize SMM on all CPUs by relocating the SMM region
and setting SMRR on all the cores. Additionally SMI
is enabled in the south cluster.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted rambi. Tested with DEBUG_SMI and noted
power button turns off board while in firmware.
Change-Id: I92e3460572feeb67d4a3d4d26af5f0ecaf7d3dd5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173983
Reviewed-on: http://review.coreboot.org/4892
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
There are 2 methods currently available in coreboot to load
ramstage from romstage: cbfs and vboot. The vboot path had
to be explicitly enabled and code needed to be added to
each chipset to support both. Additionally, many of the paths
were duplicated between the two. An additional complication
is the presence of having a relocatable ramstage which creates
another path with duplication.
To rectify this situation provide a common API through the
use of a callback to load the ramstage. The rest of the
existing logic to handle all the various cases is put in
a common place.
Change-Id: I5268ce70686cc0d121161a775c3a86ea38a4d8ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5087
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
After running the MRC blob print out some information
on the training: MRC version, number channels, DDR3
type, and DRAM frequency.
Example output:
MRC v0.90
2 channels of DDR3 @ 1066MHz
Apparently there are two dunit IOSF ports -- 1 for each
channel. However, certain registers really on live in
channel 0. Thus, there was some changes to dunit support
in the iosf area.
BUG=chrome-os-partner:22875
BRANCH=None
TEST=Built and booted bayleybay in different configs.
Change-Id: Ib306432b55f9222b4eb3d14b2467bc0e7617e24f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172770
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4882
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Add suport for verifying the ramstage with vboot
during romstage execution. Along with this support
select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to
cache the relocated ramstage 1MiB below the
top end of the TSEG region.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted with CONFIG_VBOOT_VERIFY_FIRMWARE=y
selected.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I355f62469bdcca62b0a4468100effab0342dc8fc
Reviewed-on: https://chromium-review.googlesource.com/172712
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4880
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
It's helpful to have a lot of the early init happen
before the handoff to mainboard. One example of this
need is having the BARs programmed so that the mainboard
can read board-specific gpios.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built. Booted and saw console outout in bayleybay
mainboard.
Signed-off-by; Aaron Durbin <adurbin@chromium.org>
Change-Id: I030d7b4f9061ad7501049e8e204ea12255061fbe
Reviewed-on: https://chromium-review.googlesource.com/172290
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4871
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
- Add functions to peek at GPIO input pad values (need to be used from
romstage for board ram_id GPIOs)
- Modify UART GPIOs to use existing fn-assignment function
TEST=Manual. Add debug print and verify that GPIO functions return input
values. Also, verify UART still functions in romstage.
BUG=chrome-os-partner:22865
Change-Id: Ib2e57631c127a592cfa20ab6e2184822424e9d77
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172189
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4870
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Set the BSP to operate at max frequency early in romstage.
The call to punit_init() is when the frequency actually ramps as
that makes the punit actually start working.
BUG=chrome-os-partner:22857
BRANCH=None
TEST=Built and booted. Noted operating frequency status is max.
Change-Id: Icfd9e5c7682aa21fc740bd687607ca6a66597d5e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172131
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4869
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The caching policy for romstage was previously using a 32KiB
of cache-as-ram for both the MRC wrapper and the romstage stack/data.
It also used a 32KiB code cache region. The BWG's limitations for
the code and data region before memory is up was wrong. It consists
of a 16-way set associative 1MiB cache. As long as enough addresses
are not read there isn't a risk of evicting the data/stack.
Now create a 64KiB cache-as-ram region split evenly between romstage
and the MRC wrapper. Additionally cache the memory just below
4GiB in CBFS size. This will cover any code and read-only data needed.
BUG=chrome-os-partner:22858
BRANCH=None
TEST=Built and booted quickly with corresponding changes to MRC warpper.
CQ-DEPEND=CL:*146175
Change-Id: I021cecb886a9c0622005edc389136d22905d4520
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172150
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4868
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The punit is responsible for a number of things. Without
performing the sequence included it won't change processor
frequency when requested and apparently there are some bizarre
hangs introduced if this sequence isn't included either. Lastly,
this needs to come after microcode has been loaded. As that is
done in bootblock the ordering is correct.
One other side effect is that this fixes the graphics devices'
device id. Before it was showing up as the same device id of the
SoC transaction router.
BUG=chrome-os-partner:22880
BUG=chrome-os-partner:23085
BUG=chrome-os-partner:22876
BRANCH=None
TEST=Built and booted.
Change-Id: Ib7be1d4b365e9a45647c778ee5f91de497c55bf1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171862
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4864
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The TCO timer always starts ticking out of reset.
However, depending on microcode loading and punit
initialization the TCO timing out has a different
impact on the sytem. Without loading microcode
or initializing the punit the tco times out and
nothing happens. However, when microcode is loaded
a timeout will reset the system. Lastly, if the
punit is initialized but the microcode isn't loaded
the TCO timeout will shut down the system.
To fix all the weird symptoms disable the TCO.
BUG=chrome-os-partner:22858
BRANCH=None
TEST=Built and booted with microcode loading. Reset doesn't
occur.
Change-Id: I49cd62f510726a96bf734ae728a352c671d1561e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171860
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4862
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Apparently there was another BAR living at 0x5c in the LPC
bridge that mapped the PUNIT registers. EDS 2.0 released
and this register is now documented.
BUG=chrome-os-partner:23085
BRANCH=None
TEST=Built and booted.
Change-Id: I5892c2a14923b57826060e92b4335cb1952ea057
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171612
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4861
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The mrc_wrapper.h was changed to protect against ABI differences
between the two sets of compilers and flags used. This requires
a prope shim for the console output funciton.
BUG=chrome-os-partner:23048
BRANCH=None
TEST=Built and booted successfully.
Change-Id: I976e692e66dcfc0eacadae6173abfd9b81e31137
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171580
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This commit always selects COLLECT_TIMESTAMPS and starts
tracking TSC values from the early stages of bootblock.
The initial timestamp value is saved in mm0 and mm1 while
in bootlbock. This approach works because romcc is not configured
to use mmx registers for its compilation.
Additionally, the romstage api with the mainboard was changed to
always pass around a pointer to a romstage_params structure as the
timestamps are saved in there until ram is up.
BUG=chrome-os-partner:22873
BRANCH=None
TEST=Built and booted with added code to print out timestamps at
end of ramstage. Everything looks legit.
Change-Id: Iba8d5fff1654afa6471088c46a357474ba533236
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170950
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The graphics device needs to have its resource contraints
initialized before running the reference code. Right now just
use a 256MiB aperture, 32MiB of stolen memory data, and 2MiB
GTT memory.
BUG=chrome-os-partner:22869
BRANCH=None
TEST=Built and booted. Noted amount of stolen memory matches
configuration as well as BAR size within the graphics
device.
Change-Id: I328bf858f288363187cf705d6340947393b5ff10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170427
Reviewed-on: http://review.coreboot.org/4850
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The initial Bay Trail code is intended to support
the mobile and desktop version of Bay Trail. This support
can train memory and execute through ramstage. However,
the resource allocation is not curently handled correctly.
The MRC cache parameters are successfully saved and reused
after the initial cold boot.
BUG=chrome-os-partner:22292
BRANCH=None
TEST=Built and booted on a reference board through ramstage.
Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168387
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4847
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|