summaryrefslogtreecommitdiff
path: root/src/soc/intel/baytrail/acpi
AgeCommit message (Collapse)Author
2018-03-14soc/intel/baytrail: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Broadwell code. Test: boot Windows 10 on google/squawks with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: Iab15e1de2bb7d8fbec2e8705a621cfca0f255d4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-12soc/baytrail: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for google/rambi as to not break compilation. Change-Id: I4ef978214aa36078dc04ee1c73b3e2b4bb22f692 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20056 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09soc/baytrail: assign unique DMA request lines to I2C controllersMatt DeVillier
Each I2C controller should have a unique pair of DMA request lines, and DMA channels should be assigned incrementally, rolling over as necessary. Source: Intel Baytrail/ValleyView UEFI reference code Change-Id: Icc9b27aaa14583d11d325e43d9165ddda72ca865 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02soc/baytrail: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Iad947ae2cd541d3407455b218c2b352b9a373718 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19973 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02soc/baytrail: add missing USB port defsMatt DeVillier
Add device/address stub for XHCI USB port 7. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Iae874a9ba01e9428e07cf7ff15e663365b2354a9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10ACPI: Fix IASL Warning about unused method for GBUF checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) { Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: Ie2f46808e92c309a63ba7661bcbd77402a08366a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12694 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24intel/soc/baytrail: Move MCRS ResourceTemplate out of _CRS methodMartin Roth
Fixes these remarks: Object is not referenced (Name is within method [_CRS]) The ACPI compiler is trying to be helpful in letting us know that we're not using various fields in the MCRS ResourceTemplate when we define it inside of the _CRS method. Since we're not intending to use those objects in the method, it shouldn't be an issue, but the warning is annoying and can mask real issues. Moving the creation of the MCRS object to outside of the CRS method and referencing it from there solves this problem. Change-Id: I54ab3ad9ed148fdd24e8615d83bc8ae668d1dbff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I6a1b1daa291298c85e14f89aa47a0693837cec6f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7037 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
Several of the intel platforms define the region reserved for PCI memory resources in a location where it overlaps with the MMIO (MCFG) region. Using the memory map from mohon_peak as an example: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-000000007fbcffff: RAM 4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES 5. 000000007fc00000-000000007fdfffff: RESERVED 6. 00000000e0000000-00000000efffffff: RESERVED 7. 00000000fee00000-00000000fee00fff: RESERVED 8. 0000000100000000-000000017fffffff: RAM The ACPI table describing the space set aside for PCI memory (not to be confused with the MMIO config space) is defined as the region from BMBOUND (the top of DRAM below 4GB) to a hardcoded value of 0xfebfffff. That region would overlap the MMIO region at 0xe0000000-0xefffffff. For rangeley the upper bound of the PCI memory space should be set to 0xe0000000 - 1. The MCFG regions for several of the affected chipsets are: rangeley 0xe0000000-0xefffffff baytrail 0xe0000000-0xefffffff haswell 0xf0000000-0xf3ffffff sandybridge 0xf8000000-0xfbffffff TEST = intel/mohonpeak and intel/bayleybay. Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/9972 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns baytrail to the new SoC header include scheme. BUG=None TEST=Tested with whole series. Compiled Rambi. Change-Id: I0f0a894f6f33449756582eefa0b50bae545220db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1216a86538517c03a7e5bca547d08ff3dbcaa083 Original-Change-Id: If5d2a609354b3d773aa3d482e682ab97422fd9d5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/222026 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-02Baytrail: add _PRT to each PCIe root port deviceTed Kuo
Report PCI routing table of all PCIe root ports for legacy interrupt. Some PCIe devices using legacy interrupt can't work if PCI routing table isn't defined. It's necessary and defined in BWG Chapter 28.1.3. BUG=chrome-os-partner:31943 TEST=compiled and tested BRANCH=NONE Signed-off-by: Ted Kuo <tedkuo@ami.com.tw> Change-Id: I2c684edfd1fc624bed471783584250cd9f5e66f5 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: b9040d564a32607327057a84b9aab14e66cd5b45 Original-Change-Id: Ia15ced6c5fdcc6712e5f2831e42c6dee320f166b Original-Reviewed-on: https://chromium-review.googlesource.com/218422 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Ted Kuo <tedkuo@ami.com.tw> Original-Commit-Queue: Ted Kuo <tedkuo@ami.com.tw> Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw> Reviewed-on: http://review.coreboot.org/9201 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-16acpi: Generate valid ACPI processor objectsTimothy Pearson
The existing code generated invalid ACPI processor objects if the core number was greater than 9. The first invalid object instance was autocorrected by Linux, but subsequent instances conflicted with each other, leading to a failure to boot if more than 10 CPU cores were installed. The modified code will function with up to 99 cores. Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8422 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-11-25intel: Remove IRQ1 from possible PIRQ assignemnt.Vladimir Serbinenko
According to spec IRQ1 isn't available for PIRQ assignment. Has gone unnoticed probably because modern OS use MSI or at least APIC and even with noapic don't use IRQ1 with PCI IRQs. Change-Id: Idc7db249007df629b27e8cae41cc80358d5306f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7478 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-10-28Baytrail/dptf: Always return 0 in TCPU._PPCKein Yuan
According to DPTF team _PPC in TCPU must return 0 always. BUG=chromium:355964 TEST=Pass build. BRANCH=rambi Change-Id: I76f0da27757ba4717f0e392bcd80e890d925061a Original-Change-Id: I8b9e17e5479e8a226cb11cd43ce888a3e4dead73 Signed-off-by: Kein Yuan <kein.yuan@intel.com> Reviewed-on: https://chromium-review.googlesource.com/193069 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 6dbcc677ceebbaf832e41e6db1e6cf171e2e231f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7215 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
baytrail: combine SPI configuration in romstage Reviewed-on: https://chromium-review.googlesource.com/185140 (cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402) baytrail: lock down registers before handoff Reviewed-on: https://chromium-review.googlesource.com/185200 (cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e) baytrail: invoke SMM finalization on handoff Reviewed-on: https://chromium-review.googlesource.com/185201 (cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a) rambi: don't invoke SMM finalization Reviewed-on: https://chromium-review.googlesource.com/185202 (cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef) rambi: remove handling of APM_CNT_FINALIZE Reviewed-on: https://chromium-review.googlesource.com/185203 (cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab) baytrail: don't increment boot count on S3 resume Reviewed-on: https://chromium-review.googlesource.com/185381 (cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c) rambi: enable HDA device Reviewed-on: https://chromium-review.googlesource.com/184574 (cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196) baytrail: lock down spi controller according to mainboard Reviewed-on: https://chromium-review.googlesource.com/185631 (cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317) rambi: implement mainboard_get_spi_config() to lock dow spi controller Reviewed-on: https://chromium-review.googlesource.com/185632 (cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524) baytrail: introduce ssus_disable_internal_pull() Reviewed-on: https://chromium-review.googlesource.com/185740 (cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d) rambi: fix write-protect gpio reading at romstage Reviewed-on: https://chromium-review.googlesource.com/185741 (cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7) baytrail: DPTF: implement charger current limit Reviewed-on: https://chromium-review.googlesource.com/185759 (cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6) rambi: Enable charger participant and define states Reviewed-on: https://chromium-review.googlesource.com/185760 (cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137) baytrail: increase command wait timeout Reviewed-on: https://chromium-review.googlesource.com/185874 (cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc) baytrail: make caching MRC data more robust Reviewed-on: https://chromium-review.googlesource.com/185875 (cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8) baytrail: upgrade MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/186391 (cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885) rambi: instruct MRC to use weaker memory ODT settings Reviewed-on: https://chromium-review.googlesource.com/186420 (cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292) rambi: Move touch wakeup resource GPIO to separate device Reviewed-on: https://chromium-review.googlesource.com/186932 (cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef) baytrail: Set some MSRs related to turbo power Reviewed-on: https://chromium-review.googlesource.com/186933 (cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c) baytrail: change power consumption number for ACPI_C3/C6FS. Reviewed-on: https://chromium-review.googlesource.com/186934 (cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065) baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device Reviewed-on: https://chromium-review.googlesource.com/186928 (cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece) baytrail: Disable P-state HW coordination on 4-core SKU Reviewed-on: https://chromium-review.googlesource.com/187575 (cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78) baytrail: DPTF: Enable mainboard-specific _PDL Reviewed-on: https://chromium-review.googlesource.com/187576 (cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87) rambi: Apply DPTF tuning parameters Reviewed-on: https://chromium-review.googlesource.com/187577 (cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca) rambi : change lpe_codec_clk_freq to 19.2 Reviewed-on: https://chromium-review.googlesource.com/187594 (cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4) Squashed 25 commits for baytrail/rambi. Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
rambi: Change RAM_ID GPIOs to GPIO_INPUT Reviewed-on: https://chromium-review.googlesource.com/182934 (cherry picked from commit 8afd981a091a3711ff3b55520fe73f57f7258cc0) baytrail: initialize rtc device Reviewed-on: https://chromium-review.googlesource.com/183051 (cherry picked from commit 1b80d71e4942310bd7e83c5565c6a06c30811821) baytrail: Set SOC power budget values for SdpProfile 2&3 Reviewed-on: https://chromium-review.googlesource.com/183101 (cherry picked from commit 87d49323cac4492c23f910bd7d43b83b3c8a9b55) baytrail: Set PMC PTPS register correctly Reviewed-on: https://chromium-review.googlesource.com/183280 (cherry picked from commit 1b520b577f2bf1b124db301f57421665b637f9ad) baytrail: update to version 809 microcode for c0 Reviewed-on: https://chromium-review.googlesource.com/183256 (cherry picked from commit 8ed0ef4c3bed1196256c691be5b80563b81baa5e) baytrail: Add a shared GNVS init function Reviewed-on: https://chromium-review.googlesource.com/183332 (cherry picked from commit 969dffda1d3d0adaee58d604b6eeea13a41a408c) baytrail: Add basic support for ACPI System Wake Source Reviewed-on: https://chromium-review.googlesource.com/183333 (cherry picked from commit a6b85ad950fb3a51d12cb91c869420b72b433619) baytrail: allow configuration of io hole size Reviewed-on: https://chromium-review.googlesource.com/183269 (cherry picked from commit 95a79aff57ec7bf4bcbf0207a017c9dab10c1919) baytrail: add in C0 stepping idenitification support. Reviewed-on: https://chromium-review.googlesource.com/183594 (cherry picked from commit 8ad02684b25f2870cdea334fbd081f0ef4467cd4) baytrail: add option for enabling PS2 mode Reviewed-on: https://chromium-review.googlesource.com/183595 (cherry picked from commit c92db75de5edc2ff745c1d40155e8b654ad3d49f) rambi: enable PS2 mode for VNN and VCC Reviewed-on: https://chromium-review.googlesource.com/183596 (cherry picked from commit 821ce0e72c93adb60404a4dc4ff8c0f6285cbdf9) baytrail: add config option for disabling slp_x stretching Reviewed-on: https://chromium-review.googlesource.com/183587 (cherry picked from commit f99804c2649bef436644dd300be2a595659ceece) rambi: disable slp_x stretching after sus fail Reviewed-on: https://chromium-review.googlesource.com/183588 (cherry picked from commit 753fadb6b9e90fc8d1c5092d50b20a2826d8d880) baytrail: ACPI_ENABLE_WAKE_SUS_GPIO macro for ACPI Reviewed-on: https://chromium-review.googlesource.com/183597 (cherry picked from commit 78775098a87f46b3bb66ade124753a195a5fa906) rambi: fix trackpad and touchscreen wake sources Reviewed-on: https://chromium-review.googlesource.com/183598 (cherry picked from commit 3022c82b020f4cafeb5be7978eef6045d1408cd5) baytrail: Add support for LPE device in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184006 (cherry picked from commit 398387ed75a63ce5a6033239ac24b5e1d77c8c9f) rambi: Add LPE GPIOs for Jack/Mic detect Reviewed-on: https://chromium-review.googlesource.com/184007 (cherry picked from commit edde584bb23bae1e703481e0f33a1f036373a578) rambi: Set TSRx passive threshold to 60C Reviewed-on: https://chromium-review.googlesource.com/184008 (cherry picked from commit 1d6aeb85fd1af64d5f7c564c6709a1cf6daad5ee) baytrail: DPTF: Add PPCC object for power limit information Reviewed-on: https://chromium-review.googlesource.com/184158 (cherry picked from commit e9c002c393d8b4904f9d57c5c8e7cf1dfce5049b) baytrail: DPTF: Add _CRT/_PSV objects for the CPU participant Reviewed-on: https://chromium-review.googlesource.com/184442 (cherry picked from commit e04c20962aede1aa9e6899bd3072daa82e8613bd) rambi: Move the CPU passive/critical threshold config to DPTF Reviewed-on: https://chromium-review.googlesource.com/184443 (cherry picked from commit dda468793143a6d288981b6d7e1cd5ef4514c2ac) baytrail: Fix XHCI controller reset on resume Reviewed-on: https://chromium-review.googlesource.com/184500 (cherry picked from commit 0457b5dce1860709fcce1407e42ae83023b463cd) baytrail: update lpe audio firmware location Reviewed-on: https://chromium-review.googlesource.com/184481 (cherry picked from commit 0472e6bd45cb069fbe4939c6de499e03c3707ba6) rambi: Put LPSS devices in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184530 (cherry picked from commit 52bec109860b95e2d6260d5433f33d0923a05ce1) baytrail: initialize HDA device and HDMI codec Reviewed-on: https://chromium-review.googlesource.com/184710 (cherry picked from commit 393198705034aa9c6935615dda6eba8b6bd5c961) baytrail: provide GPIO_ACPI_WAKE configuration Reviewed-on: https://chromium-review.googlesource.com/184718 (cherry picked from commit 44558c3346f5b96cf7b3dcb25a23b4e99855497b) rambi: configure wake pins as just wake sources Reviewed-on: https://chromium-review.googlesource.com/184719 (cherry picked from commit ee4620a90a131dce49f96b2da7f0a3bb70b13115) baytrail: I2C: Add config data to ACPI Device Reviewed-on: https://chromium-review.googlesource.com/184922 (cherry picked from commit ffb73af007e77faf497fbc3321c8163d18c24ec8) Squashed 28 commits for rambi and baytrail. Change-Id: If6060681bb5dc9432a54e6f3c6af9d8080debad8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-07-17soc,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If70f5ad26d639d7366772f4468a25bca83ac0857 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6295 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-15baytrail: Add ACPI Device for XHCIDuncan Laurie
This will allow USB devices to wake the system (if 5V is not turned off) and the controller to enter D3 at runtime. (if autosuspend is enabled) BUG=chrome-os-partner:23629 BRANCH=baytrail TEST=build and boot on baytrail 1) with modified EC to leave 5V on in S3 ensure that waking from suspend with USB keyboard works. 2) with laptop-mode-tools usb autosuepend config updated see that device enters D3 at runtime when no external devices attached. Change-Id: Ia396d42494e30105f06eb3bd65b4ba8b1372cf35 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/182536 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5046 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-13baytrail: dptf: Add disable trip point methodsDuncan Laurie
Added a method in each temp sensor to disable the aux trip points and then a wrapper function to call this method for each enabled temperature sensor. The event handler function is changed to not use a switch statement so it does not need to be serialized. This was causing issues with nested locking between the global lock and the EC PATM mutex. Some unused code in temp sensors that was added earlier is removed and instead a critical threshold is specified in _CRT. The top level DPTF device _OSC method is expanded to check for the passive policy UUID and initialize thermal devices. This is done for both enable and disable steps to ensure that the EC thermal thresholds are reset in both cases. Additionally the priority based _TRT is specified with TRTR=1. BUG=chrome-os-partner:17279 BRANCH=rambi TEST=build and boot on rambi, load esif_lf kernel drivers and start esif_uf application. Observe that temperature thresholds are set properly when running 'appstart Dptf' and that they are disabled after running 'appstop Dptf' Change-Id: Ia15824ca42164dadae2011d4e364b70905e36f85 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/182024 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5037 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-13baytrail: Updates for DPTF ACPI frameworkDuncan Laurie
- Remove some unused functions from CPU participant that were confusing the userland component since the CPU does not have an ACPI managed sensor. - Guard the charger participant with an ifdef so it can be left out if not supported. - Use the EC methods for setting auxiliary trip points and for handling the event when those trip points are crossed. - Add _NTT _DTI _SCP methods for thermal sensors. I'm not clear if these are required or not but they seem to be expected by the other DPTF framework components. BUG=chrome-os-partner:17279 BRANCH=rambi TEST=build and boot on rambi and load ESIF framework Change-Id: I3c9d92d5c52e5a7ec890a377e65ebf118cdd7087 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/181662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5028 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-12baytrail: Expose IOSF as ACPI objectDuncan Laurie
The kernel iosf driver uses HID INT33BD to probe and be provided the 12 bytes in PCI for access. BUG=chrome-os-partner:17279 BRANCH=none TEST=build and boot on rambi, load iosf_mbi driver and verify that it gets address 0xe00000d0 Change-Id: I865eafe664f00f21d1ebb967c291083830d895b9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180098 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5021 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-10baytrail: Add support for LPSS and SCC devices in ACPI modeDuncan Laurie
This adds the option to put LPSS and SCC devices into ACPI mode by saving their BAR0 and BAR1 base addresses in a new device NVS structure that is placed at offset 0x1000 within the global NVS table. The Chrome NVS strcture is padded out to 0xf00 bytes so there is a clean offset to work with as it will need to be used by depthcharge to know what addresses devices live at. A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and the EMMC 4.5 IRQ is changed to 44. New ACPI code is provided to instantiate the LPSS and SCC devices with the magic HID values from Intel so the kernel drivers can locate and use them. The default is still for devices to be in PCI mode so this does not have any real effect without it being enabled in the mainboard devicetree. Note: this needs the updated IASL compiler which is in the CQ now because it uses the FixedDMA() ACPI operator. BUG=chrome-os-partner:23505,chrome-os-partner:24380 CQ-DEPEND=CL:179459,CL:179364 BRANCH=none TEST=manual tests on rambi device: 1) build and boot with devices still in PCI mode and ensure that nothing is changed 2) enable lpss_acpi_mode and see I2C devices detected by the kernel in ACPI mode. Note that by itself this breaks trackpad probing so that will need to be implemented before it is enabled. 3) enable scc_acpi_mode and see EMMC and SDCard devices detected by the kernel in ACPI mode. Note that this breaks depthcharge use of the EMMC because it is not longer discoverable as a PCI device. Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179481 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5004 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-09baytrail: Basic DPTF frameworkDuncan Laurie
This is not complete yet but it compiles and doesn't cause any issues by itself. It is tied into the EC pretty closely so that is part of the same commit. Once we have more of the EC support done it will need some more work to make use of those new interfaces properly. BUG=chrome-os-partner:17279 BRANCH=none TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF Change-Id: I4b27e38baae18627a275488d77944208950b98bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179459 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5002 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-08baytrail: Fix _CRS to build with new IASLDuncan Laurie
The new IASL is complaining about the PCI memory region not having consistent base/end/length values because they are placeholder that are fixed up in the method before returning. Put in some more valid placeholder values to make it happy. BUG=chromium:311294 BRANCH=none TEST=build and boot with IASL 20130117 on rambi Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178864 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4988 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Add ACPI code to describe GPIO controllerDuncan Laurie
There are 3 banks of GPIOs that need to be described with specific _UID and memory/interrupt values. BUG=chrome-os-partner:24314 BRANCH=none TEST=build and boot on rambi, check for probed driver: gpiochip_find_base: found new base at 154 gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00 gpiochip_find_base: found new base at 126 gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01 gpiochip_find_base: found new base at 82 gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02 fed0c000-fed0cfff : INT33FC:00 fed0c000-fed0cfff : INT33FC:00 fed0d000-fed0dfff : INT33FC:01 fed0d000-fed0dfff : INT33FC:01 fed0e000-fed0efff : INT33FC:02 fed0e000-fed0efff : INT33FC:02 Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178601 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4985 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-06baytrail: Add ACPI CPU entriesDuncan Laurie
- C-state table based on static config MWAIT values are from ref code for non-S0ix config C6 substate 8 is ignored by the kernel as it violates the CPUID but it is left in as the other substate may not work. - P-state table generated with proper ratio and VID values relies on having the package power msr set to magic value as the power-on default is wrong - T-state table uses static table BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I7c997e58cb3a71d0ec413b17f0c5467bef4bf62c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175742 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4954 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
The mainboard needs an opportunity to hang devices off of the LPC device. Therefore, provide this opportunity for the mainboard. BUG=chrome-os-partner:23505 BRANCH=None TEST=Buit and booted with keyboard. Keys work. Change-Id: Ie2b660ad43e86d9237b0b0bb0720b069670bc537 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176133 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4949 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05baytrail: interrupt routing supportAaron Durbin
This provides the initial support for interrupt routing in bay trail. It includes both acpi changes and board changes to ensure the interdependencies are met with the current ASL code. The PIRQ routing is handled by the mainboard exporting an irqroute.h header that describes the per device and PIRQ PCI settings. There are still a lot of ACPI errors in the kernel with this change, though. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted rambi into kernel. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e Reviewed-on: https://chromium-review.googlesource.com/175700 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30baytrail: Add default _OSC methodDuncan Laurie
This is needed to let the kernel know it can control everything and not to disable features. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I40ff15bb931a9be7c31509ec84489083b5af0a82 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175629 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4939 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add root bus resource regionsDuncan Laurie
Populate the PCI mmio region from NVS TOLM variable. Other regions are fixed. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Iec8352b0464ad850a76bd1706c028628c477731d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175628 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4938 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
There is a lot of NVS allocated to things that are not really used. Most of these are removed and some are moved around. Thermals are expected to be handled with DPTF so I've removed that bit of code but have not yet cleaned up the thermal zone. I left in the SIO BARs since I think we will need those still even though they may need work still. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Id16ee67e6b3709a303c001afd72947147f938127 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175626 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4936 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
Add a length define for all the reserved MMIO regions and use them in the ACPI code to reserve the regions there. Add a region for the "abort page" documented in the EDS. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175624 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4934 Tested-by: build bot (Jenkins)
2014-01-31baytrail: add initial supportAaron Durbin
The initial Bay Trail code is intended to support the mobile and desktop version of Bay Trail. This support can train memory and execute through ramstage. However, the resource allocation is not curently handled correctly. The MRC cache parameters are successfully saved and reused after the initial cold boot. BUG=chrome-os-partner:22292 BRANCH=None TEST=Built and booted on a reference board through ramstage. Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/168387 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4847 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:50:53 +0000