summaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake
AgeCommit message (Collapse)Author
2019-07-09cpu/x86: Flip SMM_TSEG defaultKyösti Mälkki
This is only a qualifier between TSEG and ASEG. Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-04soc/intel: Replace uses of dev_find_slot()Kyösti Mälkki
To call dev_find_slot(0, xx) in romstage can produce invalid results since PCI bus enumeration has not been progressed yet. Replace this with method that relies on bus topology that walks the root bus only. Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-04arch/x86: Adjust size of postcar stackKyösti Mälkki
With VBOOT=y && VBOOT_MEASURED_BOOT=y message digest will be allocated from the stack and 1 KiB reserve used with the recent platforms was no longer sufficient. The comment of LZMA scratchpad consuming stack was obsolete for postcar, so these can be reduced to same 4 KiB. Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-01Use 3rdparty/intel-microcodeArthur Heymans
Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21soc/intel: Provide SPD manufacturer ID and module type to SMBIOSDuncan Laurie
The DIMM manufacturing ID was not being initialized and so the DIMMs were not described in SMBIOS tables properly. The module type can also be provided, but the SMBIOS code expects SPD module type values from DDR2 so the DDR3/4 values are adjusted before sending to SMBIOS. BUG=b:134897498 BRANCH=sarien TEST=dump and compare with dmidecode BEFORE: Type: DDR4 Manufacturer: Unknown (0) Form Factor: Unknown AFTER: Type: DDR4 Manufacturer: Hynix/Hyundai Form Factor: SODIMM Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-06src/soc/intel/common/smbios: Add addtional infos to dimm_infoChristian Walter
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry. Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/intel: Replace UART_BASE() and friends with a KconfigNico Huber
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-29src/soc: Add missing 'include <types.h>'Elyes HAOUAS
<types.h> is supposed to provide <stdint.h> and <stddef.h>. When <types.h> is included, <stdint.h> and/or <stddef.h> is removed. Change-Id: I2db0a647bc657a3626cb5e78f23e9198e290261a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-29soc/intel/apollolake: Fix value stored to gnvs is never readJohn Zhao
Clang Static Analyzer found version 8.0.0 gnvs is allocated, but it is never used. Change sizeof(*gnvs) to sizeof(global_nvs_t) while adding ACPI GNVS to CBMEM. TEST=Built and boot up to kernel. Change-Id: Ie9421af4a556d1d88183aa938ee2a124a10ab727 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-29soc/intel/apollolake: Don't use CAR_GLOBALArthur Heymans
All platforms using this code have NO_CAR_GLOBAL_MIGRATION. Change-Id: I0f393385aa94f18c2e05af3b5a54999575323d18 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-22post_code: add post code for hardware initialization failureKeith Short
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to detect or initialize a required hardware component. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21soc/intel: Remove unused pointer argument in mca_configure()Subrata Banik
Change-Id: Iad3982d9db07a1f17ac39e87ff9c37956e40c258 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-18soc/intel: Fill DIMM serial number from SPDDuncan Laurie
Fill the DIMM serial number field for SMBIOS from the saved SPD data that is returned by FSP. BUG=b:132970635 TEST=This was tested on sarien to ensure that SMBIOS type 17 filled the serial number from the DIMM: Handle 0x000B, DMI type 17, 40 bytes Memory Device Locator: DIMM-A Serial Number: 41164beb Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-13soc/intel: Geminilake Refresh feature request supportJohn Zhao
Add 0x706a8 for GLK Refresh CPU stepping ID. BUG=b:132414963 BRANCH=None TEST=Image built successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I4641d9bd4c82211e7200f617cae9043b0f2f38d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-06soc/intel/apollolake: Reset GPI IS & IE registers at ramstageKarthikeyan Ramasubramanian
Reset GPI Interrupt status and enable registers from ramstage instead of bootblock so that it applies to devices in field. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/apollolake: Add ramstage hookFelix Singer
A hook for romstage is already existing but not for ramstage. It's very useful for debugging as it allows to run code for testing purposes by the mainboard. Also, it allows to run configuration code or configure FSP options, which don't have a devicetree option. Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-29soc/intel/apollolake/bootblock: Clear the GPI IS & IE registersKarthikeyan Ramasubramanian
Clear the GPI Interrupt Status & Enable registers to prevent any interrupt storms due to GPI. BUG=b:130593883 BRANCH=octopus TEST=Ensure that the Interrupt status & enable registers are reset during the boot up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: Ia3b9d3bf08472219348e20b53bae470c589039fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-26soc/intel/apl/acpi: Do not report 8259 PICsNico Huber
The IRQ tables don't support this path, so we shouldn't report presence of the legacy PICs. As the _PIC method is optional and we ignore the passed parameter anyway, drop it. Change-Id: I51301a600e16f74fde00fdcb4595e1f47a52e207 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-13soc/intel/cpulib: Remove redundent enable/disable functionsSubrata Banik
This patch removes multiple enable/disable function definitions and make use of single function with argument to know feature status (enable/disable). Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06src: Use #include <timer.h> when appropriateElyes HAOUAS
Also, extra-lines added or removed and local includes moved down. Change-Id: I5e739233f3742fd68d537f671642bb04886e3009 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28soc/intel/apollolake: Add support to log XHCI wake eventsKarthikeyan Ramasubramanian
Add support to identify and log the XHCI wake events for apollolake into event logs. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: I55b850646dda8acaa086a9012c2d8b611016f932 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32000 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25soc/apollolake: Add UART0Felix Singer
In my case, on UPsquared board with Celeron N3350 CPU, I don't have UART2 but UART0. Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-24intel/apollolake: Add HDA to disable_dev functionNico Huber
Change-Id: Id4f5e1fad935645830782ba922f55f614c72cf06 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31353 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-24soc/intel/common: Remove common chip config use_fsp_mp_initSubrata Banik
This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-12src: Drop unused 'include <arch/acpigen.h>'Elyes HAOUAS
Use <arch/acpi.h> when appropriate. Change-Id: I05a28d2c15565c21407101e611ee1984c5411ff0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-08src/soc/intel/apollolake/cpu.c: Set up local APICMario Scheithauer
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the initialization of the programmable interrupt controller (PIC) for faultless operation. The PIC mode is need for USB support (e.g. keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM). Therefore add setup_lapic() to configure the APIC. Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06intel/apollolake: Fix incorrect config usageJulius Werner
This IS_ENABLED(XXX) line should've clearly been IS_ENABLED(CONFIG_XXX). This patch can fix that. However, I don't have (and don't plan to acquire) an affected system to test, so approve at your own risk (or let me know if I should just remove that check instead). Change-Id: I79a0fca65853798ee45c3779b437864ba3cf2b1e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-18soc/intel: Add mem_rank info in SMBIOSFrancois Toguo
"mosys memory spd print all" returns incorrect memory ranks info. This patch and 2 upcomming ones (one in FSP) will address the issue. BUG=b:122329046 TEST=Boot to OS on Bobba variant of Octopus BRANCH=octopus Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842 Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Reviewed-on: https://review.coreboot.org/c/31235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-05soc/intel/apl: Call mca_configure() on cold boots onlyNico Huber
By APL BIOS Spec, we must not do this on warm boots. The TODO comment seems stale and copied over. So the actual requirements for SGX are unknown and we add a guard for that case. Change-Id: I09b4a2fe22267d7318951aac20a3ea566403492e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/31200 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05intel/apollolake: Add parameter to enable VTD in devicetreeWerner Zeh
The FSP has a parameter to enable or disable the VTD feature (Intel's Virtualization Technology for Directed I/O). In current header files for FSP-S (Apollo Lake and Gemini Lake) this parameter is set to disabled per default. Therefore, if the FSP was not modified via BCT, this feature is most likely disabled on all mainboards. Add a chip parameter so that VTD can be enabled on mainboard level in devicetree and therefore this feature can be activated if needed. Change-Id: Ic0bfcf1719e1ccc678a932bf3d38c6dbce3556bc Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/31194 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05soc/intel/apollolake: Update XHCI ports for GLK in ACPI tablesFurquan Shaikh
GLK has a dedicated USB2 port that is used specifically for CNVi BT. This requires that the ACPI tables define an additional USB 2 port which results in _ADR for USB 3 ports being different for GLK than APL. This change splits the ports in xhci.asl into APL and GLK specific ports.asl and selects the appropriate file based on CONFIG_SOC_INTEL_GLK. It also adds support for returning HS09 for GLK if ACPI name is requested for that port. BUG=b:123670712 BRANCH=octopus TEST=Verified that generated DSDT for octopus (GLK) includes HS09 and for reef (APL) does not include HS09 definition. Change-Id: I2d3d3690ec9ea1f6e35c38c3b3cbb82e961b7950 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31172 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-31soc/intel/apollolake: Fix XHCI device name in ACPIKarthikeyan Ramasubramanian
XHCI is currently named as XHC1. This leads to namespace lookup error in the kernel when children USB ACPI devices are added under the scope of XHCI device. BUG=b:123296264 BRANCH=octopus TEST=Boot to ChromeOS; Ensure that the below error is resolved in the kernel dmesg [ 0.001000] ACPI Error: [\_SB_.PCI0.XHCI.RHUB.HS03] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210) Change-Id: Ia4921547fee6fb51333319b9e881501a7e75ebce Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/31147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-30soc/intel/apollolake: Sync fsp upd structure updateJohn Zhao
FSP 2.0.9 provides UPD interface to adjust integrated filter value, usb3 LDO and pmic vdd2 voltage. Change coreboot upd structure to sync with fsp 2.0.9 release. BUG=b:123398358 CQ-DEPEND=CL:*817128 TEST=Verified yorp boots to kernel. Change-Id: I3d17dfbe58bdc5222378459723da8e9ac0573510 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/31131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-29soc/intel/apollolake: Add GLK usb2eye configuration overrideSeunghwan Kim
Now we have usb2eye configuration register in FSPUPD, so we need to add an interface to override usb2eye setting. BRANCH=octopus BUG=NONE TEST=Verified usb2eye custom setting works Change-Id: I5c500964658072eaaf59364242aa928df25d99d1 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-28intel/apollolake: Add IPU to disable_dev functionWerner Zeh
The SoC has an Image Processing Unit which is located on PCI 00:03.0. There is a corresponding parameter for FSP which handles enabling/disabling of this functionality (IpuEn). Add this device to the disable_dev() function of the chip so that if this device is disabled in devicetree the matching FSP parameter will be disabled as well. As this parameter is only valid for Apollo Lake, use the config switch CONFIG_SOC_INTEL_GLK to disable this code if compiled not for Apollo Lake. As this issue is regarding a missing structure member, this check needs to be done on preprocessor level and not at runtime. Test=Verified this function on mc_apl2. Change-Id: I75444bf483de32ba641f76ca50e9744fdce2e726 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28intel/apollolake: Add fixed resources for VTd to system resourcesWerner Zeh
If the VTd feature is enabled, there will be up to two fixed resources which are set up by the FSP. Add these resources to the list of system resources so that the PCI enumerator will know them. Change-Id: If96fc1c93746e3c7f510e5b3095ea3090e1b8807 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30991 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28soc/apollolake: Generate DMAR tableWerner Zeh
Generate DMAR table if VTd feature is enabled. Test=Booted into Linux on mc_apl2 and verified the DMAR table contents. In addition turned off Vtd and verified that no DMAR table is generated at all. Change-Id: Ie3683a2f3578c141c691b2268e32f27ba2e772fa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28soc/intel/{apl,skl}: Drop redundant `select RTC`Nico Huber
RTC is now implicitly selected through SOC_INTEL_COMMON_BLOCK_RTC and SOC_INTEL_COMMON_PCH_BASE. Change-Id: I1885c419cfe318b75f3bda6220d4a6f6a8e26575 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-25soc/intel/apollolake: Override GLK usb clock gating registerJohn Zhao
It was observed system suspend/resume failure while running RunInDozingStress. Apply correct GLK usb clock gating register value to mitigate the failure. BRANCH=octopus BUG=b:120526309 TEST=Verified GLK clock gating register value after booting to kernel. Change-Id: I50fb16f5ab0e28e79f71c7f0f8e75ac8791c0747 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-23soc/{amd,intel}: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a59fd2f370d2b0d830ca83be9a9bc1abe2750f5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-15soc/intel/apl: Hook microcode updates upNico Huber
Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
Invert the default instead of selecting it everywhere. Restores the ability to use its Kconfig prompt. Beside Qemu targets, the only platforms that didn't select it seem to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The latter two were about to be patched anyway. Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30891 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14soc/intel/apollolake: Add option to disable xHCI Link Compliance ModeJohn Zhao
Provide options to disable xHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. BRANCH=octopus BUG=b:115699781 TEST=Verified booting to kernel. Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30816 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10soc/intel/common/block: Move tco common functions into block/smbusSubrata Banik
This patch cleans soc/intel/{apl/cnl/icl/skl} by moving common soc code into common/block/smbus. BUG=b:78109109 BRANCH=NONE TEST=Build and boot KBL/CNL/APL/ICL platform. Change-Id: I34b33922cafee9f31702587e0f9c03b64f0781b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/26166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10Untangle CBFS microcode updatesNico Huber
The option to specify a binary file name was added later for platforms that do not provide microcode updates in our blobs repository. Alas, it wasn't visible what platforms these are. And if you specified a file for a platform that already had one, they were all included together. Make it visible which platforms don't provide binaries with the new con- figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to include binaries by default or explicitly show that no files are inclu- ded (default to CPU_MICROCODE_CBFS_NONE). Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS. And clean up the visibility of options: Don't show CBFS related options on platforms that don't support it and don't show external file options if the platform uses special rules for multiple files (CPU_MICROCODE_ MULTIPLE_FILES). Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29934 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-07soc/intel: Standardize names of common MSRsElyes HAOUAS
Use defined name in Intel 64 and IA-32 Architectures Software Developer’s Manual. Renamed MSRs are (register address, register name): 0x35 MSR_CORE_THREAD_COUNT 0x121 MSR_EMULATE_PM_TIMER 0x1f4 MSR_PRMRR_PHYS_BASE 0x1f5 MSR_PRMRR_PHYS_MASK 0x2f4 MSR_UNCORE_PRMRR_PHYS_BASE 0x2f5 MSR_UNCORE_PRMRR_PHYS_MASK Change-Id: I53f11a2ce831456d598aa21303a817d18ac89bba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-20soc/intel: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ic29891d78514db3b7eed48414a14e4ff579436c0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30004 Reviewed-by: David Guckian Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: Idef8c556ac8c05c5e2047a38629422544392cd62 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-07soc/intel/apollolake: Print ME version on exit of BS_DEV_INIT stageKarthikeyan Ramasubramanian
Recently there has been a change to print ME version. But the stage at which the version is printed causes the HECI device to remain in D0 state. This in turn prevents the SoC from entering S0ix state. This change moves printing ME version a little earlier so that the HECI device is put into D0i3 state by FSP and the SoC can enter S0ix state successfully. BRANCH=octopus BUG=b:120571529 TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that the device boots to ChromeOS. Ensure that the device enters S0ix successfully(using suspend_stress_test -c 25). Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-06soc/intel/apl: Warn if CBFS is outside the memory mapped areaNico Huber
As part of the memory mapped BIOS region is covered by SRAM, check that CBFS always fits the effectively mapped region of flash. This is usually taken care of by reserving the SRAM range in the FMAP (e.g. as BIOS_UNUSABLE), but can be missed. Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apl: Configure LPC serial IRQ modeNico Huber
Sync the FSP settings with what coreboot does. Why both FSP and coreboot configure this redundantly stays a secret. TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC works correctly now, but was confused by the wrong settings before because the FSP defaults allowed to disable the LPC clock. Change-Id: Id1c7180f460678bf0f9458228591050dd628c052 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/common: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-23soc/intel/apollolake: Remove cycle in Kconfig symbol dependenciesPatrick Georgi
Change-Id: Iad60a5c8863283b7d373e1f6aaff48c40b7bb274 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23soc/intel/apollolake: Add Kconfig switch to enable minimum clock ratioWerner Zeh
Add a Kconfig switch to be able to set the CPU clock to the lowest possible ratio. If enabled the CPU will consume as little power as possible while providing the lowest performance. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to its need. Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-12src: Remove unneeded include "{arch,cpu}/cpu.h"Elyes HAOUAS
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-09soc/intel/apollolake: Disable HECI1 before jumping to OSFurquan Shaikh
This change disables HECI1 device at the end of boot sequence. It uses the P2SB messaging to disable HECI1 device before hiding P2SB and dropping privilege level. BUG=b:119074978 BRANCH=None TEST=Verified that HECI1 device is not visible in lspci on octopus. Change-Id: Id6abfd0c71a466d0cf8f19ae9b91f1d3446e3d09 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-08soc/intel/apollolake: Improve cold boot and S3 resumeJohn Zhao
FSP 2.0.7.1 provides UPD interface to execute IPC command. Configure PmicPmcIpcCtrl for PMC to program PMIC PCH_PWROK delay from default 100ms to 10ms to improve cold boot and S3 resume performance. BUG=b:118676361 CQ-DEPEND=CL:*703187 TEST=Verified system_resume_firmware_ec time reduction. Change-Id: I05656c9083a855112120b7f1b0ec01c42f582409 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07soc/intel/apollolake: Provide interface to update TCC offsetJohn Su
This change provides an interface for apollolake to set TCC before BIOS reset complete happens in romstage. With this change, we can add code to update Tcc in devicetree. BUG=b:117789732 TEST=Match the result from TAT UI Change-Id: I4419d3bbe2628fcb26ef81828d6325fc952dbabc Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/29351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-05src: Remove unneeded include <arch/ioapic.h>Elyes HAOUAS
Change-Id: Ic08b191ee4dbcc56eb482601aa268394545936ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29292 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-31soc/intel/apollolake: Revert the w/a nWR_24 settingJohn Zhao
GLK FSP 2.0.6.0 has properly determined MR1 value during InitializeJedec. Revert the w/a code "odt_config |= nWR_24" in coreboot. BUG=b:118422998 CQ-DEPEND=CL:*703187 TEST=Verified booting to kernel. Change-Id: I6dd3c14b2048259a5518e1f72ff1061b9c5c7dfe Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-30src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29312 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-27soc/intel/*: Make FSP header path user configurablePatrick Georgi
Required to compensate for Chrome OS' tree differences Change-Id: I01fe80b55c69ff57da1c96a76bd1d9b5a2d4a9a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-25soc/intel: Consolidate FSP CAR setup and teardown codePraveen hodagatta pranesh
This patch adds following changes, - APL, CFL, DENVERTON soc's using same implementation to setup and teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is cosolidated into one file and moved to common code CPU car folder. - exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file and moved to common CPU car. - The new file apollolake/fspcar.c is addded to pass tempraminit parameters. - Coffee lake Soc uses FSPT to support Intel Security features like BootGuard verify boot and Measured boot. Add FSP CAR support for CFL by programming tempraminit parameters and add FSP_T_XIP default if FSP_CAR is selected. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup. Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR without errors. Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-23soc/intel/common/block/gpio: Allow GPI to be dual-routedFurquan Shaikh
This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Move common IA-32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Use "cpu/x86/msr.h" for common IA-32 MSRs and correct IA-32 MSRs names. Change-Id: Ida7f2d608c55796abf9452f190a58802e498302d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28752 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05src: Fix MSR_PKG_CST_CONFIG_CONTROL register nameElyes HAOUAS
Change-Id: I492224b6900b9658d54c8cf486ef5d64b299687f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-09-14soc/intel/denverton_ns: Enable common block PMCJulien Viard de Galbert
Mainly update headers to build. Added option PMC_GLOBAL_RESET_ENABLE_LOCK to remove function configuring the global reset through PMC base. On denverton the global reset lock is not in PMC base but in the PCI registers so this code cannot be shared. Change-Id: I9ace70862cab63f8355252d034292596c7eab1fd Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/25426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Evandro Luiz Hauenstein <kingsumos@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-13src/*/intel/: clarify Kconfig options regarding IFDStefan Tauner
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid Inter Flash Descriptor to exist. It does *not* identify platforms or boards that are capable of running in descriptor mode if it's valid. Refine the help text to make this clear. Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply declare that IFD is supported by the platform. Select this value everywhere instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected. Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to the mainboard directory. Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-06chromeos/gnvs: remove function and naming cleanupJoel Kitching
- Remove unused acpi_get_chromeos_acpi_info (see CB:28190) - Make function naming in gnvs.h consistent (start with "chromeos_") BUG=b:112288216 TEST=compile and run on eve Change-Id: I5b0066bc311b0ea995fa30bca1cd9235dc9b7d1b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-31siemens/mc_apl1: Correct the Tx signal from SATA interfaceMario Scheithauer
Because of an incorrect transmit voltage swing, the signal must be adjusted. The factor of slices for full swing level can be corrected via the High Speed I/O Transmit Control Register 3. Change-Id: I116802cd2a944658fc3022e948eba43cebe52bb4 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2018-08-28siemens/mc_apl1: Extend circuit life by clock gating and power gatingMario Scheithauer
The firmware of devices connected to LPC should deassert the LPC CLKRUN# signal when there is no bus activity on LPC. Necessary changes: - Enable LPC CLKRUN# - Enable LPC PCE (Power Control Enable) - Enable LPC CCE (Clock Control Enable) - Remove I/O decoding range on LPC for COM 3 - Disable I/O UART driver Change-Id: I2fd80e3fdcf23658f97b8182a77df7e09ddf25d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-24soc/intel/apollolake: Make eMMC max speed configurableMario Scheithauer
The eMMC maximum speed is set to HS400 mode per default. To increase the lifetime of the circuit, it is necessary to reduce the eMMC speed. Change-Id: I6fa5eb56a0593e24269ef143645c506232879889 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28282 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-22soc/intel/apollolake: Fix logical vs. bitwise operatorJohn Zhao
src/soc/intel/apollolake/chip.c Apply bitwise operator instead of logical one. Found-by: Coverity Scan BRANCH=None TEST=Built & booted Yorp board. Change-Id: I36746b04dec889f53c8d7eeb3b1d8118eff1de42 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22cbtable: remove chromeos_acpi from cbtableJoel Kitching
Since we can derive chromeos_acpi's location from that of ACPI GNVS, remove chromeos_acpi entry from cbtable and instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET. BUG=b:112288216 TEST=None CQ-DEPEND=CL:1179725 Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 01:02:24 +0000