aboutsummaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake/chip.h
AgeCommit message (Collapse)Author
2017-07-03soc/intel/apollolake: Use common gpio for apollolakeHannah Williams
No regression observed on a APL platform Change-Id: I0fcc22df5eaec014f3b89755415f051b05aa554a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-13soc/intel/apollolake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters TEST=Build for reef Change-Id: I4fbe95037ca4b52e64ba37e5c739af4a03f64feb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18728 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-10soc/intel/apollolake: Add PM methods to power gate SD cardVenkateswarlu Vinjamuri
This implements dynamic generation of sdcard GpioInt in SSDT. GpioInt in SSDT generation is based on the card detect GPIO if it is provided by the mainboard in devicetree. This implements GNVS variable to store the address of sdcard cd pin. GNVS used to store rxstate of the sdcard cd pin to get card presence. Add _PS0/_PS3 methods to power gate the sd card controller in S0ix and runtime PM. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should enter S0ix and resume with no issue. Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18496 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-01-14soc/intel/apollolake: Allow USB2 eye pattern configuration in devicetreeKane Chen
This code allows people to override the usb2 eye pattern UPD settings for boards. BUG=chrome-os-partner:61031 BRANCH=None TEST=Usb2 function ok and make sure fsp upd is overridden Change-Id: I5fab620a29aba196edf1f24ffe6a1695de1e523e Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/18060 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08soc/intel/apollolake: Set PL2 in RAPL registerSumeet Pawnikar
This patch sets the package power limit (PL2) value in RAPL register. BUG=chrome-os-partner:60535 TEST=Built, booted on reef and verified PL2 value. Change-Id: I83fe854cf3e9fc92ab87f84b86e64ebb6085065f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11soc/intel/common/lpss_i2c: simplify API and use common config structureAaron Durbin
The apollolake and skylake had duplicate stanzas of code for initializing the i2c buses. Additionally, they also had very similar structures for providing settings for the i2c speed control. Introduce a new struct lpss_i2c_bus_config and utilize it in both apollolake and skylake thereby removing the need for SoC-specific structres. The new structure is used for initializing a bus fully as the lpss i2c API is simplified in that lpss_i2c_init() is only required to be called. The struct lpss_i2c_bus_config structure is passed in for both initializing and filling in the SSDT information. The formerly exposed functions are made static to reduce the external API exposure. BUG=chrome-os-partner:58889 Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-16soc/intel/apollolake: Set PL1 limits for RAPL MSR registersSumeet Pawnikar
This patch sets the package power limit (PL1) value in RAPL MSR and disables MMIO register. Added configurable PL1 override parameter to leverage full TDP capacity. BUG=chrome-os-partner:56922 TEST=webGL performance(fps) not impacted before and after S3. Change-Id: I34208048a6d4a127e9b1267d2df043cb2c46cf77 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16884 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14soc/intel/apollolake: Add PM methods to power gate PCIeVaibhav Shankar
This implements GNVS variable to store the address of PERST_0, _ON/_OFF methods to power gate PCIe during S0ix entry, and PERST_0 assertion/de-assertion methods. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07soc/apollolake: Enable/disable Audio clk and power gate in devicetree.cbVenkateswarlu Vinjamuri
BUG=chrome-os-partner:56034 Change-Id: Id88d262b32dea468536575117fc34d52076a3096 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16423 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30soc/intel/apollolake: add option for SLP_S3_L assertion widthAaron Durbin
In order to provide time for the S0 rails to discharge one needs to be able to set the SLP_S3_L assertion width. The hardware default is 60 microcseconds which is not slow enough on most boards. Therefore provide a devicetree option for the mainboard to set accordingly for its needs. An unset value in devicetree results in a conservative 2 second SLP_S3_L duration. BUG=chrome-os-partner:56581 Change-Id: I6c6df2f7a181746708ab7897249ae82109c55f50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16326 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-30soc/intel/apollolake: Include gpe.h in chip.hFurquan Shaikh
This is required for using GPE_* macros in devicetree.cb. BUG=chrome-os-partner:55670 Change-Id: I8f6f536df96cf8145bb0c03ec413fb2f374301b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15946 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28intel/apollolake: Update gnvs for dptfShaunak Saha
This patch updates dptf variable in gnvs based on device configuration by reading the device tree structure. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Amenia and Reef board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I8ab34cdc94d8cdc840b02347569a9f07688e92cd Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15620 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15soc/intel/apollolake: Consolidate ISH enablingAndrey Petrov
Since the Integrated Sensor Hub can be disabled through devicetree.cb as a PCI device, there is no need for a separate register variable. Remove handling the register and update mainboards' devicetrees. Also keep ISH disabled on both Reef and Amenia. Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15710 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-08soc/intel/apollolake: Include gpio_defs headerHarsha Priya
Add the gpio_defs.h reference in chip.h to enable reef and amenia devicetree.cb to use the definitions from gpio_defs.h. Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517b1 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15550 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-02soc/apollolake: Allow enable/disable of LPSS S0ix from devicetreeSaurabh Satija
Change-Id: Ib7aa1d1b32adcb541a155b8ba2ee011cb5bcf784 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-02soc/intel/apollolake: Add GPE routing codeShaunak Saha
This patch adds the basic framework for SCI to GPE routing code. BUG = chrome-os-partner:53438 TEST = Toogle pch_sci_l from ec console using gpioset command and see that the sci counter increases in /sys/firmware/acpi/interrupt and also 9 in /proc/interrupts. Change-Id: I3b3198276530bf6513d94e9bea02ab9751212adf Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15324 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-02soc/intel/apollolake: Add support for LPSS I2C driverDuncan Laurie
Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-09soc/intel/apollolake: Add EMMC DLL APIZhao, Lijian
Starting from 136_30,FSP supports to update all the SDIO DLL programming value through silicon init upd. Implement the interface to pass board specific programming value to fsp silicon init. Change-Id: Ifd901148f3f7f89f966217491c661ec346337c38 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://chromium.devtools.intel.com/7372 Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://chromium.devtools.intel.com/7585 Reviewed-on: https://review.coreboot.org/15084 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-26soc/apollolake: Add ish_enable in soc_intel_apollolake_configHannah Williams
Also initialize IshEnable in Silicon Init UPD with the value from devicetree.cb Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I8f57a7353471cc3efa21c7011cdd0b369d25275d Reviewed-on: https://review.coreboot.org/14894 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-06soc/apollolake/lpc: Allow configuring SERIRQ via devicetreeAlexandru Gagniuc
Every other SOC uses a CONFIG_* flag to enable or disable SERIRQ continuous mode. Why they do that is beyond me, but the way we implement it on apollolake is via devicetree. Change-Id: I6e05758e5e264c6b0015467dd25add3bffe2b040 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06Revert "soc/intel/apollolake: Enable LPC bus interface"Alexandru Gagniuc
This reverts commit e976bd44692d2adb320a1256f1b6bfaa6469108a. The LPC resource allocation will be completely reworked in subsequent patches. The most straightforward approach is to start by reverting the existing code. Change-Id: I2475542b79817020d4c956f22ed5856f05046b16 Reviewed-on: https://review.coreboot.org/14583 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-28soc/intel/apollolake: Enable LPC bus interfaceAndrey Petrov
This adds early LPC setup in bootblock (for Chrome EC) as well as late (ramstage) IO decode/sirq enable. Change-Id: Ic270e66dbf07240229d4783f80e2ec02007c36c2 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Freddy Paul <freddy.paul@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14469 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-10soc/intel/apollolake: Add chip initializationAndrey Petrov
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-25 20:39:07 +0000