summaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake/Makefile.inc
AgeCommit message (Collapse)Author
2019-01-15soc/intel/apl: Hook microcode updates upNico Huber
Only tested on APL. Change-Id: I53f680fc4342a9bd1cd0ba9d72e025995e25f7f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-25soc/intel: Consolidate FSP CAR setup and teardown codePraveen hodagatta pranesh
This patch adds following changes, - APL, CFL, DENVERTON soc's using same implementation to setup and teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is cosolidated into one file and moved to common code CPU car folder. - exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file and moved to common CPU car. - The new file apollolake/fspcar.c is addded to pass tempraminit parameters. - Coffee lake Soc uses FSPT to support Intel Security features like BootGuard verify boot and Measured boot. Add FSP CAR support for CFL by programming tempraminit parameters and add FSP_T_XIP default if FSP_CAR is selected. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup. Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR without errors. Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-23soc/intel/apollolake: Add reset code to postcar stagePatrick Georgi
Also add a test case for that, a config taken from chromiumos with some references to binaries dropped that aren't in our blobs repo (eg audio firmware). Change-Id: I411c0bacefd9345326f26db4909921dddba28237 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29223 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-06-26soc/intel/apollolake: Enable logging for wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_platform_log_wake_source to enable wake source logging from S0ix on APL/GLK. Additionally, elog.c is added to smm stage. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Power button ============ 59 | 2018-06-25 14:01:11 | S0ix Enter 60 | 2018-06-25 14:01:30 | S0ix Exit 61 | 2018-06-25 14:02:00 | Wake Source | Power Button | 0 =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open =========== Trackpad ================ 67 | 2018-06-25 14:04:20 | S0ix Enter 68 | 2018-06-25 14:04:33 | S0ix Exit 69 | 2018-06-25 14:05:03 | Wake Source | GPE # | 15 70 | 2018-06-25 14:05:08 | Wake Source | GPE # | 66 Change-Id: I005de58c73d00dc9d7e64f1459f6d786792b94db Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27234 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15soc/intel/apollolake: add rt5682 NHLT supportNaveen Manohar
Add APIs and required parameters for creating Realtek 5682 SSP endpoint in NHLT table. BUG=b:79235534 TEST=check that NHLT table defined is created properly. With the series merged & required driver support in kernel. Verify Headset Audio playback. Change-Id: Ic26a0b881f77af64ba00fd714b08c0f17c0acb3d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27soc/intel/apollolake: enable cache-as-ram paging for glkAaron Durbin
Add support and enalbe cache-as-ram paging for glk to work around a cache-as-ram corruption issue. glk executes verstage, romstage, and FSP-M directly out of cache-as-ram (just like apl). However, the front end on glk is very agressive about pulling cache lines into L1I for potential execution. When the snoops hit in the L1D and the cache lines are dirty the processor writes the line back. However, there is no backing store for the dirty lines to go. As such when the line is pulled back in the value is all 0xff's, corrupting cache-as-ram. To fix the issue one needs to enable paging with NX (no execute) permissions which prevents the above actions from happening because the TLB will indicate that shouldn't be fetched into the instruction cache since data will be marked no execute. The generated page tables are added to cbfs and only added to the COREBOOT cbfs as they are only consumed in the early cache-as-ram stages. The page tables generated with: $ go run util/x86/x86_page_tables.go \ --iomap_file=src/soc/intel/apollolake/glk_page_map.txt \ --metadata_base_address=0xfef00000 \ --pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \ --pt_output_c_file=src/soc/intel/apollolake/pt.c Merged address space: 00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small 00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small 00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small 00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small 00000000ff000000 -- 0000000100000000 WP : 8 big 0 small Total Pages of page tables: 5 Pages linked using base address of 0xfef00000. BUG=b:72728953 Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-20soc/intel/apollolake: Add support for GSPIRavi Sarawadi
BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-07soc/intel/apollolake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I9a30258ba43ee5920f585c1bd06bc25773778ec4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-02soc/intel/apollolake: Add PNP configDivya Chellap
1. Programs PNP values for AUNIT, BUNIT & TUNIT registers as per reference code. 2. A new configuration option pnp_settings is introduced in devicetree.cb to select PNP settings among performance, power, power & performance. TEST = built and booted glkrvp, verfied that the callback gets control, verified warm and cold reboots. Change-Id: Ibd70a42c9406941c8a93cc972f22c2475e9d0200 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30soc/intel/{APL,GLK}: Use Intel SRAM common codeV Sowmya
TEST:Build and boot reef. Verified that SRAM common code is used to set the resources. Change-Id: If9f5d400df09b4a0aa4b464d7f1f24320696b0aa Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/apollolake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot reef Change-Id: I1bb22ef1737b9e35892294ec0d66df39c546d72e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/apollolake: Fix nhlt blobs path for GLKHannah Williams
Change-Id: Iabea32654918575c952857145ee6edb165899baf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-04soc/intel/apollolake: Move to common dsp driverLijian Zhao
Move dsp driver implementation to common dsp driver. TEST=Boot up and check dsp driver loaded or not in OS. Change-Id: Ia2be1c9f18e0e110600bd56a0b6cb8d40ca5e01f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-27soc/intel/apollolake: Switch to common p2sbLijian Zhao
Using common p2sb driver instead of private one. TEST=Boot up into OS, and read back registers through PCR by iotools, return is not 0xffffffff. Change-Id: I30f3ef7bc37a8cb268af6fe2e4da3ec835c17633 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10soc/intel/apollolake: Enable UART debug controller on S3 resumeFurquan Shaikh
1. Add a new variable to GNVS to store information during S3 suspend whether UART debug controller is enabled. 2. On resume, read stored GNVS variable to decide if UART debug port controller needs to be initialized. 3. Provide helper functions required by intel/common UARRT driver for enabling controller on S3 resume. BUG=b:64030366 Change-Id: Idd17dd0bd3c644383f273b465a16add184e3b171 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20888 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-26soc/intel/apollolake: Update memory HOB info save functionRavi Sarawadi
SMBIOS memory HOB produced by glk FSP v52_27 has new structure members, which are not available in current apl FSP. New FSP-m header file in https://review.coreboot.org/#/c/20673/ lists new SMBIOS structure members. Break memory HOB save routine into different functions for glk and apl to accomodate new changes. Change-Id: I33c6e4f2842cebbb326b6a05436fa69e3836ffc6 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20674 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21soc/intel/apollolake: Bring in delta for GLK SOCHannah Williams
Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-03soc/intel/apollolake: Use common gpio for apollolakeHannah Williams
No regression observed on a APL platform Change-Id: I0fcc22df5eaec014f3b89755415f051b05aa554a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-20soc/intel/common: Add SMM common code for Intel PlatformsBrandon Breitenstein
SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09soc/intel/apollolake: Use CPU common library codeBarnali Sarkar
This patch makes SOC files to use common/block/cpu/cpulib.c file's helper functions. Change-Id: I529c67cf20253cf819d1c13849300788104b083c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19827 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09soc/intel/apollolake: Use common systemagent codeSubrata Banik
This patch perform resource mapping for PCI, fixed MMIO, DRAM and IMR's based on inputs given by SoC. TEST=Ensure PCI root bridge 0:0:0 memory resource allocation remains same between previous implementation and current implementation. Change-Id: I15a3b2fc46ec9063b54379d41996b9a1d612cfd2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/apollolake: Use intel/common/xhci driverSubrata Banik
Change-Id: Iccb6b6c8c002701d17444fcf62ec11315e5aeed9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-02soc/intel/apollolake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: Ifd72734dadda541fe4c828e4f1716e532ec69c27 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19080 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Id265505cfc106668aea25ad93e114fe20736b700 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19236 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/intel/apollolake: Clean up code by using common CAR initSubrata Banik
This patch currently contains common CAR initialization required in bootblock phase along with common MSR header - 1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization and CAR teardown. 2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-10soc/intel/apollolake: Add PM methods to power gate SD cardVenkateswarlu Vinjamuri
This implements dynamic generation of sdcard GpioInt in SSDT. GpioInt in SSDT generation is based on the card detect GPIO if it is provided by the mainboard in devicetree. This implements GNVS variable to store the address of sdcard cd pin. GNVS used to store rxstate of the sdcard cd pin to get card presence. Add _PS0/_PS3 methods to power gate the sd card controller in S0ix and runtime PM. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should enter S0ix and resume with no issue. Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18496 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-03-06soc/intel/apollolake: Move XDCI in its own fileAndrey Petrov
Split out dual-port switching functionality into dedicated xdci.c. Change-Id: Ia58fc3fb6d017dd0c19cc450d1caba307fc89a7b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18226 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-08soc/intel/apollolake: dump CSE statusAaron Durbin
Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-21soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR InitBrenton Dong
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/intel/apollolake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully for reef. Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17562 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-14soc/intel/apollolake: Add support for DMIC 4ch & 1chSathyanarayana Nujella
Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-28soc/intel/apollolake: Use fixed resource for SRAM and IPC1Lijian Zhao
Intel telemetry support will require PMC IPC1 and SRAM devices to be operated in ACPI mode. Then using fixed resources on BAR0, BAR1 and BAR2 (PMC only) for those two devices will help the resource assignment in DSDT stage. BUG=chrome-os-partner:57364 BRANCH=None TEST=Boot up into Chrome OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I8f0983a90728b9148a124ae3443ec29cd7b344ce Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16648 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02apollolake: relocate fsp header files to vendorcodeBrandon Breitenstein
FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25soc/intel/apollolake: Enable ELOGBrandon Breitenstein
Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-23soc/intel/apollolake: Use CONFIG_NHLT_DMIC_2CH_16B for dmicSaurabh Satija
Update the config variable that gets set to use DMIC 2 channel blob for intel/apollolake platforms. This flag is set in mainboard. Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/16251 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-10soc/apollolake: add GPIO SMI supportShaunak Saha
GPIOs which trigger SMIs set the GPIO_SMI_STS status bits in SMI_STS register. This patch also sets the SMI_EN bit in enable register for each community based on GPIOROUTSMI bit in gpio pad. When SMI on a gpio happens status needs to be gathered on gpio number which is done by reading the GPI_SMI_STS and GPI_SMI_EN registers. BUG=chrome-os-partner:54977 TEST=When system is in firmware mode executing the command lidclose from ec console shuts down the system. Change-Id: Id89a526106d1989c2bd3416ab81913e6cf743d17 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15833 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-24soc/intel/apollolake: ensure usb port 0 is in host modeAaron Durbin
The controller for device mode USB is not plan of record on apollolake. However, one still needs to configure the one port to be host mode by default such that the devices work as expected when plugged into the board. BUG=chrome-os-partner:54581,chrome-os-partner:54656 TEST=Enabled xdci controller. Used USB type C->A dongle to check that a mass storage device worked on port 0 on reef. Change-Id: Ia9ec5076491f31bc5dc3d534e235fb49f7b2efac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15781 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-19soc/intel/apollolake: Add basic HECI supportAndrey Petrov
Add functions to read Host Firmware Status register and a helper function to determine if CSE is ready. BUG=chrome-os-partner:55055 TEST=none Change-Id: If511a51c04f7e59427d7952fa67b61060e2be404 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15713 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-13soc/intel/apollolake: add initial ITSS supportAaron Durbin
The interrupt and timer subsystem (ITSS) sits between the APIC and the other logic blocks. It only supports positive polarity events, but there's a polarity inversion setting for each IRQ such that it can pass the signal on to the APIC according to the expected APIC redirection entry values. This support is needed in order for the platform/board to set the expected interrupt polarity into the APIC for gpio signals. BUG=chrome-os-partner:54955 Change-Id: I50ea1b7c4a7601e760878af515518cc0e808c0d1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15647 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-02soc/intel/apollolake: Add Audio DSP deviceHarsha Priya
Add the Audio DSP device for apollolake as a PCI driver with a static scan_bus handler so generic devices can be declared under it. This is for devices like the Maxim 98357A which is connected on the I2S bus for data but has no control channel bus and instead just has a GPIO for channel selection and power down control and needs to describe that GPIO connection to the OS via ACPI. Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659b12 Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/15528 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-02soc/intel/apollolake: handle p2sb quirksAaron Durbin
The P2SB device is device 0xd and function 0. If hidden that causes the latter pci devices on function >= 1 to not be probed in the kernel. This is also a problem for coreboot if the P2SB device is hidden by FSP. That means the coreboot driver won't be ran. Therefore, provide hide and unhide functions for the P2SB device. The other quirk is to allow the GPIO devices to work correctly. Those devices are ACPI devices. However, their resources are sub-regions within the P2SB BAR. Sadly, linux doesn't handle ACPI devices being children of PCI devices. This leads to resource conflict errors when the P2SB device is visible. For the time being keep the P2SB device hidden, but also ensure the resources it is using are accounted for and reserved. The fallout of that is the PMC and SPI device are no longer probed by the kernel. BUG=chrome-os-partner:53017 TEST=Ensured P2SB device is visible and pci resources are allocated correctly for the devices. Change-Id: I24e59bbde74310e1ce8425b344a3ad0b88702153 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15530 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-02soc/intel/apollolake: Add support for LPSS I2C driverDuncan Laurie
Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01soc/intel/apollolake: add initial NHLT supportSaurabh Satija
Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-24soc/intel/apollolake: Implement global reset handlingAndrey Petrov
Global reset enable bit is not cleared on reset. Therefore, clear the bit early. Lock down 0xcf9 so that payload/OS can't issue global reset. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24soc/intel/apollolake: Add utility functions for global resetAndrey Petrov
Apollolake defines Global Reset where Host, TXE and PMC are reset. During boot we may need to trigger a global reset as part of platform initialization (or for error handling). Add functions to trigger global reset, enable/disable it and lock global reset bit. BUG=chrome-os-partner:54149 BRANCH=none TEST=none Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-24Revert "intel/apollolake: Use custom reset calls"Andrey Petrov
Looks like we need to do real cold reset in some FSP flows, so reverting this. This reverts commit 6f762171de4b8514fddd430052cbf24524e09e5d. Change-Id: Ie948d264c4e2572dab26fdb9462905247a168177 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15331 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21intel/apollolake: Calculate BIOS mmap at runtimeFurquan Shaikh
Instead of hard-coding the BIOS region start and end addresses, read BIOS_BFPREG to determine the base and limit for the mapped BIOS region. BUG=chrome-os-partner:54563 Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21intel/apollolake/spi: Add support for reading status regFurquan Shaikh
spi_read_status reads the status register using hardware sequencing and returns 0 on success and -1 on error. Use spi_read_status to return appropriate value for get_sw_write_protect. BUG=chrome-os-partner:54283 Change-Id: I7650b5c0ab05a8429c2b291f00d4672446d86e03 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15266 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21intel/apollolake: Enable SPI properly in bootblock and ramstageFurquan Shaikh
Bootblock: - Temporary BAR needs to be assigned for SPI device until PCI enumeration is done by ramstage which allocates a new BAR. - Call spi_init to allow bootblock/verstage to write/erase on flash. Ramstage: - spi_init needs to run in ramstage to allow write protect to be disabled for eventlog and NVRAM updates. This needs to be done pretty early so that any init calls(e.g. mainboard_ec_init) writing to flash work properly. Verified with this change that there are no more flash write/erase errors for ELOG/NVRAM. BUG=chrome-os-partner:54283 Change-Id: Iff840e055548485e6521889fcf264a10fb5d9491 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15209 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-06-12soc/intel/apollolake: allow DEBUG_SMI to workAaron Durbin
The UART support is needed in SMM in order for DEBUG_SMI to function. BUG=chrome-os-partner:54262 TEST=Ran on reef with DEBUG_SMI enabled. Can observed SMI messages. Change-Id: Ibd6b12e27d5776046b400adf72f24133b9e54af8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15151 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12intel/apollolake: Use custom reset callsFurquan Shaikh
Due to USB LDO issue in current steppings, cold reboot needs to be temporarily disabled. Thus, hard_reset call should be the same as soft_reset. Once future steppings are available INTEL_COMMON_RESET can be enabled again. Change-Id: If0ec56db3864d500acc93d2b363a78a6cd7632da Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15143 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02intel/apollolake: Add car.c to verstageFurquan Shaikh
Verstage on apollolake requires the functions defined in car.c to perform flush of l1d to l2 on loading romstage into CAR. Change-Id: I6d9a0b9dfb58c2126ad70172846e90663e588857 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-01soc/intel/apollolake: add support for IFWI regionFurquan Shaikh
On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27soc/intel/apollolake: provide SMM dependency requirementsAaron Durbin
Depending on which options are selected there needs to be certain functions supplied. However, the spi, mmap_boot, and tsc_freq modules were not included in the SMM builds. Fix the omission. Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14977 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-27soc/intel/apollolake: add support for verstageAaron Durbin
There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-25soc/apollolake: SOC specific SMM codeHannah Williams
Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-23soc/intel/apollolake: add support for writing logical boot partition 2Aaron Durbin
On apollolake the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. There's also a sort of recovery mechanism where there is a second data structure with similar contents halfway through the "BIOS" region. This second structure is referred as the logical boot partition 2 (LBP2), and it's optionally employed. Add support for writing the LBP2 to a specified FMAP region to accommodate platforms which require it. Change-Id: I1959a790f763b409238dea6b62408b42122e590e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14924 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-19soc/intel/apollolake: Relocate FSP-M during insertion in CBFSAndrey Petrov
Since FSP-M is run in CAR (as opposed to XIP), its default link address may need to be changed. Since cbfstool can relocate FSP blobs, take advantage of that feature. Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13soc/intel/apollolake: provide common LPDDR4 memory initAaron Durbin
Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14790 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-12soc/intel/apollolake: Write LB_FRAMEBUFFER table when appropriateAlexandru Gagniuc
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to be done in platform code. Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-06soc/apollolake/lpc: Open I/O to LPC based on resource allocationAlexandru Gagniuc
Besides a number of fixed memory windows, Apollolake supports opening a configureable 64 KiB MMIO window, as well as four PMIO windows to the LPC bus. Open up these windows dynamically, based on how resources were allocated to the child LPC devices. Change-Id: I170e861693cb6fd1be38889adc951f197a13460f Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14584 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-30soc/apollolake: Prevent PMC BAR reassignment during resource allocationHannah Williams
Change-Id: Ie8e21e62ecd25f3c620a57c24948411c14c1e111 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-15soc/apollolake: Add helper functions to access Power Management RegistersHannah Williams
Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14289 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-13soc/intel/apollolake: Add tsc_freq.c to all the stagesAndrey Petrov
Change-Id: I3120a52e21cf4ad03bb1d16b5b2b8a5e68aabf3f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14339 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-11soc/apollolake: Add lpc device driverLance Zhao
A dedicated pci device driver required for LPC devices as the legacy IO range need to be included to avoid IO resource confilict. Blindly set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD and LPC.Without this driver system will have assertion on load RTC DXE driver in UEFI payloads. Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/intel/apollolake: Enable CACHE_MRC_SETTINGSHannah Williams
This enables CACHE_MRC_SETTINGS by default as well selects timer configuration. Change-Id: I0248001892ef763c39097848b5adc8c1befed1f0 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14252 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-11soc/intel/apollolake: Implement SPI controller driverAlexandru Gagniuc
Implement flash read, write, and erase functionality using the hardware sequencing capabilities of the SOC. Due to changes in hardware requirements, the flash chip must be probed differently than on previous platforms (details explained in comments). Note that this is a minimal implementation, and does not provide all the bells and whistles. Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-02soc/intel/apollolake: use CAR code coherency for all CAR stagesAaron Durbin
The flush L1D to L2 operation was only being used when loading romstage from bootblock. However, when the FSP-M component is loaded no code coherency actions are taken. I suspect this is because the FSP-M component is larger than the 24KiB L1D and the entry point is early in the image. Thus, when loading the FSP-M component the earlier part of the image is flushed out to L2 in the process of loading the latter part of the component. Also, once verstage is introduced the same code coherency actions need to be taken as well. Therefore, position the apollolake code to handle all these cases. Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-23soc/intel/apollolake: utilize postcar phase/stageAaron Durbin
The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-21soc/apollolake: Add skeleton ACPI entryLance Zhao
Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13348 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/apollolake: Add memory and reserve MMIO resourcesAndrey Petrov
This adds most important MMIO reserved memory resources, real DRAM memory resources, and some DRAM resources that can not be used as RAM for whatever reason. Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13360 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/intel/apollolake: Avoid UART BAR relocation at ramstageAndrey Petrov
UART bar gets overwritten during resource allocation stage. As result the serial driver ends up using stale BAR so serial output does not work. This driver simply tells resource allocator not to change BAR of UART device. Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10soc/intel/apollolake: Add chip initializationAndrey Petrov
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/apollolake: Enable all CPU cores using the parallel MP libRavi Sarawadi
This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-08soc/intel/apollolake: Add cbmem_top() implementationAndrey Petrov
On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08soc/intel/apollolake: Add romstage that calls FSP2.0 driverAndrey Petrov
This romstage is minimalistic. Its goal is to set up some BARs that FSP expects to be set and then invoke FSP driver to train memory. Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13805 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08soc/intel/apollolake: Add support for memory-mapped boot mediaAndrey Petrov
On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-26soc/intel/apollolake: group serial console options into one KconfigAaron Durbin
Add SOC_UART_DEBUG which does all the appropriate selection of the dependent Kconfig options for seral console. Also provide a default option of it being turned off instead of always selected. Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13790 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add minimal GPIO driverAndrey Petrov
This adds the minimal functionality needed to configure SoC pads. Change-Id: I2e2268eee2b8c822b42a48a95604b0fab86c9833 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-02-11soc/apollolake: Add initial cache-as-ram setup for bootblockAlexandru Gagniuc
This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-30soc/intel: Add skeleton infrastructure for Apollolake SOCAlexandru Gagniuc
This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 19:29:37 +0000