summaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake/Kconfig
AgeCommit message (Collapse)Author
2018-05-15soc/intel/apollolake: add rt5682 NHLT supportNaveen Manohar
Add APIs and required parameters for creating Realtek 5682 SSP endpoint in NHLT table. BUG=b:79235534 TEST=check that NHLT table defined is created properly. With the series merged & required driver support in kernel. Verify Headset Audio playback. Change-Id: Ic26a0b881f77af64ba00fd714b08c0f17c0acb3d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04ifdtool: Add a list of known platforms that support IFD_VERSION_2Furquan Shaikh
ifdtool has relied on one of the fields within FCBA(read_freq) to determine whether a platform supports IFD_VERSION_1 or IFD_VERSION_2. However, newer platforms like GLK and CNL do not have read_freq field in FCBA and so the value of these bits cannot be used as an indicator to distinguish IFD versions. In the long run, we need to re-write ifdtool to have a better mapping of SoC to IFD fields. But until that is done, this change adds a list of platforms that we know do not support read_freq field but still use IFD_VERSION_2. This change also updates GLK and CNL to pass in platform parameter to ifdtool. BUG=b:79109029, b:69270831 Change-Id: I36c49f4dcb480ad53b0538ad12292fb94b0e3934 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-27soc/intel/apollolake: enable cache-as-ram paging for glkAaron Durbin
Add support and enalbe cache-as-ram paging for glk to work around a cache-as-ram corruption issue. glk executes verstage, romstage, and FSP-M directly out of cache-as-ram (just like apl). However, the front end on glk is very agressive about pulling cache lines into L1I for potential execution. When the snoops hit in the L1D and the cache lines are dirty the processor writes the line back. However, there is no backing store for the dirty lines to go. As such when the line is pulled back in the value is all 0xff's, corrupting cache-as-ram. To fix the issue one needs to enable paging with NX (no execute) permissions which prevents the above actions from happening because the TLB will indicate that shouldn't be fetched into the instruction cache since data will be marked no execute. The generated page tables are added to cbfs and only added to the COREBOOT cbfs as they are only consumed in the early cache-as-ram stages. The page tables generated with: $ go run util/x86/x86_page_tables.go \ --iomap_file=src/soc/intel/apollolake/glk_page_map.txt \ --metadata_base_address=0xfef00000 \ --pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \ --pt_output_c_file=src/soc/intel/apollolake/pt.c Merged address space: 00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small 00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small 00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small 00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small 00000000ff000000 -- 0000000100000000 WP : 8 big 0 small Total Pages of page tables: 5 Pages linked using base address of 0xfef00000. BUG=b:72728953 Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-26soc/intel/apollolake: enable exception handling in every stage for glkAaron Durbin
Now that an idt is available in every stage utilize it for exception processing to help catch and debug issues. BUG=b:72728953 Change-Id: I69e7f938f36f2e522b787e311fd148bb8fd41247 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25764 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-16soc/intel/apollolake: Fix CPU address bitsHannah Williams
APL and GLK have 39 address bits Change-Id: I9b761492332c545c13a0594d8f5937ca84bc0699 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16soc/intel/apollolake: update cache options for glkAaron Durbin
On glk there's a 4MiB L2 cache all the time. Take advantage of that by initializing a 1MiB cache-as-ram area. BUG=b:72728953 Change-Id: Ia4e777a13607d8b70c05534b0a172f0ec6b04c51 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25645 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/intel/apollolake: fix SPI input clock speedAaron Durbin
On APL and GLK the i2c blocks use 133MHz input clock, but the SPI blocks use a 100MHz input clock. Fix this so that the proper target frequencies can be hit on the SPI controllers. BUG=b:75306520 Change-Id: Iec36579894fa4633ac8d1035e6e7afec01af755f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-10soc/intel/common: prepare for lpss clock splitAaron Durbin
Apparently Intel had decided to use different clock speeds for some of its IP blocks in some of its designs. The i2c designware driver has already been moved into common code allowing for its own Kconfig value. That currently leaves SPI (UART isn't using the clock currently). Therefore, remove SOC_INTEL_COMMON_LPSS_CLOCK_MHZ and add SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ to allow for the different clock speeds present in the system for the various IP blocks. BUG=b:75306520 Change-Id: I6cb8c2de0ff446b6006bc37645fca64f2b70bf17 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25608 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-30soc/intel/common/opregion: Get rid of opregion.cPatrick Rudolph
Get rid of custom opregion implementation and use drivers/intel/gma/opregion implementation instead. Test: boot Windows 10 on google/chell and google/edgar using Tianocore payload with GOP init, observe Intel graphics driver loaded and functional. Change-Id: I5f78e9030df12da5369d142dda5c59e576ebcef7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21703 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-20soc/intel/apollolake: Add support for GSPIRavi Sarawadi
BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06soc/intel/appololake: Remove dead MPINIT code selectionArthur Heymans
This not hooked up anywhere. Change-Id: I95a2d14aea6f1a6013edf1bcb88bb35de88cba4f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23458 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-05soc/intel/common/block/pmc: Fix ACPI BAR and PCI_COMMAND in PMC config spaceHannah Williams
read_resources in common/block/pmc/pmc.c is corrupting the BAR at offset 0x20. pch_pmc_read_resources | pci_dev_read_resources | pci_get_resource Within pci_get_resource, the BAR is read and written back. Since read of ACPI BAR does not return the correct value, the subsequent write corrupts the BAR. Hence re-programming the BAR. Also, reading PMC STATUSCOMMAND register does not return bit 0 correctly in pci_dev_enable_resources. This causes IO SPACE ACCESS to get disabled. Hence making sure IO ACCESS gets enabled by setting dev->command TEST=Can boot to OS Without this change coreboot will be stuck at "Disabling ACPI via APMC:" Change-Id: I27062419d06127951ecbbb641835d06ca39ff435 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23230 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-31drivers/intel/fsp2_0: Unbind UDK2015 Kconfig from FSP2.0 driverSubrata Banik
Now SOC code can select the require UDK support package for any platform going forward with FSP2.0 model. Change-Id: Ie6d1b9133892c59210a659ef0ad4b59ebf9f1e45 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-26soc/intel/apollolake: select NO_UART_ON_SUPERIORavi Sarawadi
If not, legacy COM ports will be enumerated by kernel and console will not work. localhost ~ # cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 1: uart:16550A mmio:0xC112D000 irq:4 tx:764 rx:0 RTS|DTR 2: uart:16550A mmio:0xC112F000 irq:6 tx:0 rx:0 3: uart:unknown port:000002E8 irq:3 With this fix: 0: uart:16550A mmio:0xC112D000 irq:4 tx:0 rx:0 1: uart:16550A mmio:0xC112F000 irq:6 tx:858 rx:42 RTS|DTR 2: uart:unknown port:000003E8 irq:4 3: uart:unknown port:000002E8 irq:3 Change-Id: Iac5bf65900e090d4e785e0cd828272ebff209458 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/23219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-17soc/intel/apollolake: move default y options to CPU_SPECIFIC_OPTIONSAaron Durbin
A non-user configurable option that defaults to y should just be auto-selected instead of instantiating an instance of an option. BUG=b:69614064 Change-Id: I55cf28eaf0233182d4fa488cf4b31e8ad379b6c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/common/fast_spi: implement spi_flash_ctrlr_protect_region()Aaron Durbin
In the fast spi support implement the callback for flash_protect(). This removes the need for having SOC_INTEL_COMMON_SPI_FLASH_PROTECT Kconfig option as well spi_flash_get_fpr_info() and separate spi_flash.[ch]. BUG=b:69614064 Change-Id: Iaf3b599a13a756262d3f36bae60de4f7fd00e7dc Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-15soc/intel/apollolake: Remove duplicate selectsMarshall Dawson
Remove Kconfig selected symbols that are duplicates in the same file. Change-Id: I21a3814131f0c8e08732e826dd1bcbb677cbe0aa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22852 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07soc/intel/apollolake: add ability to enable eSPIBora Guvendik
Add config option to enable eSPI TEST=Boot to OS Change-Id: Ib4634690fe4fdb902fc0bc074a3b66b91921ddd5 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22320 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-07soc/intel/apollolake: Make use of Intel common Graphics blockSubrata Banik
TEST=Build and boot reef. Change-Id: I0edd7454912201598c43e35990e470ec18a32638 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/{APL,GLK}: Use Intel SRAM common codeV Sowmya
TEST:Build and boot reef. Verified that SRAM common code is used to set the resources. Change-Id: If9f5d400df09b4a0aa4b464d7f1f24320696b0aa Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/apollolake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot reef Change-Id: I1bb22ef1737b9e35892294ec0d66df39c546d72e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/apollolake: Move to common dsp driverLijian Zhao
Move dsp driver implementation to common dsp driver. TEST=Boot up and check dsp driver loaded or not in OS. Change-Id: Ia2be1c9f18e0e110600bd56a0b6cb8d40ca5e01f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-27soc/intel/apollolake: Switch to common p2sbLijian Zhao
Using common p2sb driver instead of private one. TEST=Boot up into OS, and read back registers through PCR by iotools, return is not 0xffffffff. Change-Id: I30f3ef7bc37a8cb268af6fe2e4da3ec835c17633 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27soc/intel/apollolake: Add SGX supportPratik Prajapati
- Call into commmon SGX code to configure core PRMRR and follow other SGX init seqeuence. - Enable SOC_INTEL_COMMON_BLOCK_SGX for both GLK - Enable SOC_INTEL_COMMON_BLOCK_CPU_MPINIT for GLK, as MP init needs to be completed before calling into fsp-s for SGX. Change-Id: I9331cf5b2cbc86431e2749b84a55f77f7f3c5960 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-09-08soc/intel/common/block: Common ACPIShaunak Saha
This patch adds the common acpi code.ACPI code is very similar accross different intel chipsets.This patch is an effort to move those code in common place so that it can be shared accross different intel platforms instead of duplicating for each platform. We are removing the common acpi files in src/soc/intel/common. This removes the acpi.c file which was previously in src/soc/common/acpi. The config for common acpi is SOC_INTEL_COMMON_BLOCK_ACPI which can be defined in SOC's Kconfig file in order to use the common ACPI code. This patch also includes the changes in APL platform to use the common ACPI block. TEST= Tested the patch as below: 1.Builds and system boots up with the patch. 2.Check all the ACPI tables are present in /sys/firmware/acpi/tables 3.Check SCI's are properly working as we are modifying the function to override madt. 4.Extract acpi tables like DSDT,APIC, FACP, FACS and decompile the by iasl and compare with good known tables. 5.Execute the extracted tables in aciexec to check acpi methods are working properly. Change-Id: Ib6eb6fd5366e6e28fd81bc22d050b0efa05a2e5d Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-04Kconfig: Move and rename ADD_VBT_DATA_FILEPatrick Rudolph
Move ADD_VBT_DATA_FILE to "Devices" menu and rename it to INTEL_GMA_ADD_VBT_DATA_FILE. Depend on Intel platforms to avoid confusing users of non-Intel platforms. The Intel GMA driver will use the vbt.bin, if present, to fill the ACPI OpRegion. Change-Id: I688bac339c32e9c856642a0f4bd5929beef06409 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-15soc/intel/apollolake: Provide option to use Common MP InitBarnali Sarkar
This patch provides the option to use the common CPU Mp Init code by selecting a Config Token. CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT config token can be selected to use the Common MP Init Code, also where CPU MP Init is done before FSP-S Init. And if the config token is not selected, the old way of implementation will exist, where MP Init is been done after FSP-S. CQ-DEPEND=CL:*397551 BUG=none BRANCH=none TEST=Build and boot Reef Change-Id: I35d012785000d3f3bfcc34138cda9cd4591559f6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10soc/intel/common/uart: Refactor uart_common_initFurquan Shaikh
1. Create a new function uart_lpss_init which takes the UART LPSS controller out of reset and initializes and enables clock. 2. Instead of passing in m/n clock divider values as parameters to uart_common_init, introduce Kconfig variables so that uart_lpss_init can use the values directly without having to query the SoC. BUG=b:64030366 TEST=Verified that UART still works on APL and KBL boards. Change-Id: I74d01b0037d8c38fe6480c38ff2283d76097282a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-08soc/intel/apollolake: Use common PMC for apollolakeShaunak Saha
With this patch apollolake uses the common PMC util code.No regression observed on a APL platform. Change-Id: I322a25a8b608d7fe98bec626c6696e723357a9d2 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/19375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/intel/apollolake: Make usage of RAPL selectableMario Scheithauer
Apollo Lake SoC supports configuration of Running Average Power Limits (RAPL) for package domain. This feature is not required for all APL mainboards. According to the APL SoC EDS Vol 4 chapter 18.4 Power Limiting Control it is not necessary to enable the RAPL algorithm per default. For that reason make the RAPL configuration selectable. Change-Id: Ib737b162f72b76c15e5768859f9099e2e7ef6426 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21soc/intel/apollolake: Bring in delta for GLK SOCHannah Williams
Change-Id: I3e76726bb77f0277ab5776ae9d3d42b7eb389fe3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-17soc/intel/common/gpio: distingiush single vs multi acpi devicesAaron Durbin
Sadly, small core and big core are not aligned with the OS driver's expectation on the number of ACPI devices used for each community. Big core uses a single device while small cores use one ACPI device per community. Allow for this distinction within the common gpio implementation and ensure apollolake is utilizing the new option to retain the correct behavior. Change-Id: I7c7535c36221139ad6c9adde2df10b80eb5c596a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20588 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-07-03soc/intel/apollolake: Use common gpio for apollolakeHannah Williams
No regression observed on a APL platform Change-Id: I0fcc22df5eaec014f3b89755415f051b05aa554a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-20soc/intel/common: Add SMM common code for Intel PlatformsBrandon Breitenstein
SMI code is very similar across Intel platforms. Move this code to common/block/smi to allow it to be shared between platforms instead of duplicating the code for each platform. smihandler.h has already been made common so all it will contain is name changes and a move to the common block location. Due to moving smihandler code, APL changes are bundled here to show this change. Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/19392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-16soc/intel/apollolake: Use SCS common codeBora Guvendik
This patch uses common SCS library to setup sd card. Change-Id: Iafbba04d7a498b9a321e8efee4abf07820d17330 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-16soc/intel/apollolake: Removing some menuconfig optionsArthur Heymans
Does not need to changeable in menuconfig. Change-Id: Id488f7333952d10d10a62ac75298ec8008e6f9b4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-09soc/intel/apollolake: Use CPU common library codeBarnali Sarkar
This patch makes SOC files to use common/block/cpu/cpulib.c file's helper functions. Change-Id: I529c67cf20253cf819d1c13849300788104b083c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19827 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09soc/intel/apollolake: Use common systemagent codeSubrata Banik
This patch perform resource mapping for PCI, fixed MMIO, DRAM and IMR's based on inputs given by SoC. TEST=Ensure PCI root bridge 0:0:0 memory resource allocation remains same between previous implementation and current implementation. Change-Id: I15a3b2fc46ec9063b54379d41996b9a1d612cfd2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
The new config choice is called RUN_FSP_GOP. Some things had to happen on the road: * Drop confusing config GOP_SUPPORT, * Add HAVE_FSP_GOP to chipsets that support it, * Make running the GOP an option for FSP2.0 by returning 0 in random VBT getters. Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/apollolake: Use Intel timer common codeAamir Bohra
Change-Id: I7b415711d01ddc0d998eba62de2c2139045efa80 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/apollolake: Add config for cpu base clock frequencyAamir Bohra
Add config for cpu base clock frequency(Mhz), use and clean up code. Change-Id: I724c48c11796aa942295d4f19cc629d4c13647e1 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/apollolake: Use XDCI common codeSubrata Banik
This patch performs apollolake specific XDCI controller initialization. Change-Id: I4649bffe1bb90d7df6a72b5334793bf8f0fdbaeb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05soc/intel/apollolake: Use intel/common/xhci driverSubrata Banik
Change-Id: Iccb6b6c8c002701d17444fcf62ec11315e5aeed9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-02soc/intel/apollolake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: Ifd72734dadda541fe4c828e4f1716e532ec69c27 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19080 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/apollolake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Id265505cfc106668aea25ad93e114fe20736b700 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19236 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28soc/intel/apollolake: Update default LPDDR4 CA ODT configRavi Sarawadi
Update default ODT config to have correct CA ODT settings as the current defaults are incorrect for all the current apollolake designs. All the current designs pull both A and B channels' LPDDR4 modules' ODT pins to 1.1V. Therefore, the correct impedance setting needs to be applied. In order for the settings to take effect one needs to clear the memory training cache in deployed systems. Trigger this by bumping the memory setting version for the SoC. If needed in the future support for allowing the override of this setting from the mainboard should be straight forward. It's just not necessary at this time. BUG=b:37687843 TEST=BAT test, warm, reboot, S3 cycle test Change-Id: I9a2f7636b46492a9d08472a0752cdf1f86a72e15 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19397 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-11intel/soc/apollolake: Use intel/common/uart driverAamir Bohra
Change-Id: I6829eca34d983cfcc86074ef593cd92236b25ac5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19204 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-11soc/intel/apollolake: Use LPSS common libraryAamir Bohra
Use lpss common library to program reset and clock register for lpss modules Change-Id: I75f9aebd60290fbf22684f8cc2ce8e8a4a4304b0 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19154 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/apollolake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: I55e196f6c5282d7c0a31b3980da8ae71764df611 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18700 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/apollolake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Iacbf58dbd55bf3915676d875fcb484362d357a44 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18673 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05soc/intel/lpss: Provide common LPSS clock configFurquan Shaikh
Since there are multiple controllers in the LPSS and all use the same frequency, provide a single Kconfig option for LPSS_CLOCK_MHZ. BUG=b:35583330 Change-Id: I3c0cb62d56916e6e5f671fb5f40210f4cb33316f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/intel/apollolake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I01a24e2d4f1c8c9ca113c128bb6b3eac23dc79ad Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18567 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-28soc/intel/apollolake: Clean up code by using common CAR initSubrata Banik
This patch currently contains common CAR initialization required in bootblock phase along with common MSR header - 1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization and CAR teardown. 2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-22soc/intel/apollolake: Add CQOS config for CAR common codeSubrata Banik
Change-Id: I5947170a96e888cea2f3faac92355e72b63c1fef Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-09soc/intel/apollolake: Start using common CSE driverAndrey Petrov
Change-Id: If866453f06220e0edcaa77af5f54b397ead3ac14 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-08soc/intel/apollolake: Move privilege drop to later stageAndrey Petrov
Previously privilege drop was happening "too early" and that caused some PMC IPC programming (performed in FSP) to fail because sideband was already locked out. This change set moves privilege drop to later stage, after last FSP notify call. BRANCH=reef BUG=chrome-os-partner:60657 TEST=iotools rdmsr X 0x121, make sure they can't be read. Also dmesg|grep -i IPC to make sure there are no errors related Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17769 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/intel/apollolake: Add save/restore variable MRC cacheAndrey Petrov
Apollolake MRC cache is divided into two regions: constant and variable. Currently they are clubbed together. Since variable data changes across cold reboot it triggers invalidation of the whole cache region. This change declubs the data, adds routines to load/store variable data on flash. BUG=chrome-os-partner:57515 TEST=with patch series applied: cold reboot, make sure MRC is not updated. Do S3 suspend/resume cycle. Change-Id: I374519777abe9b9a1e6cceae5318decd405bb527 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17237 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22soc/intel: Use correct terminology for SPI flash operationsFurquan Shaikh
FPR is an attribute of the SPI flash component and not of the SPI bus itself. Rename functions, file names and Kconfig option to make sure this is conveyed correctly. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I9f06f1a8ee28b8c56db64ddd6a19dd9179c54f50 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17560 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14soc/intel/apollolake: Increase HEAP_SIZESathyanarayana Nujella
Adding both 2-ch & 4-ch DMIC blob causes the below error: memalign(boundary=8, size=3048): failed: Tried to round up free_mem_ptr 7abc48b0 to 7abc5498 but free_mem_end_ptr is 7abc4d70 Error! memalign: Out of memory (free_mem_ptr >= free_mem_end_ptr) Increased heap size fixes the above issue. BUG=chrome-os-partner:56918 BRANCH=none TEST=Compiles successfully for reef Change-Id: Ic910f169f7ef4bb746cb273e276428713a884227 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17157 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-14soc/intel/apollolake: Add support for DMIC 4ch & 1chSathyanarayana Nujella
Add NHLT support for DMIC Quad & Mono channel capture BUG=chrome-os-partner:56918 BRANCH=none Change-Id: If630ed53bb2cf00ccc441eb062b2e8c650d3cf01 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17156 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08soc/intel/apollolake: Provide chipset value for ifdtoolAndrey Petrov
Change-Id: I99454a9fca3b677a389bcaf7693ff4e18415c9ad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17259 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-26soc/intel/apollolake: Enable write-protect SPI flash range supportFurquan Shaikh
Use intel common infrastructure to enable support for write-protecting SPI flash range. Also, enable this protection for RW_MRC_CACHE. BUG=chrome-os-partner:58896 TEST=Verified that write to RW_MRC_CACHE fails in OS using "flashrom -p host -i RW_MRC_CACHE -w /tmp/test.bin" Change-Id: I35df12bc295d141e314ec2cb092d904842432394 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-07soc/intel/apollolake: Implement stage cache to improve resume timeBrandon Breitenstein
This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: always enable BOOTBLOCK_CONSOLEAaron Durbin
In order to ensure bootblock console output shows up in cbmem console unconditionally select BOOTBLOCK_CONSOLE. BUG=chrome-os-partner:57513 Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16622 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: enable postcar consoleAaron Durbin
Unconditionally turn on postcar console for apollolake. BUG=chrome-os-partner:57513 Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16620 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-28soc/intel/apollolake: Add CQOS CAR implementationAndrey Petrov
Add new option to set up Cache-As-RAM by using CQOS, Cache Quality of Service. CQOS allows setting ways of cache in no-fill mode, while keeping other ways in regular evicting mode. This effectively allows using CAR and cache simultaneously. BUG=chrome-os-partner:51959 TEST=switch from NEM to CQOS and back, boot Change-Id: Ic7f9899918f94a5788b02a4fbd2f5d5ba9aaf91d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Update stage link addresses for 768 KiB cacheAndrey Petrov
Update link addresses for romstage and verstage. Also update FSP-M relocation address. BUG=chrome-os-partner:51959 Change-Id: Ia51a341f05b33151ea5fda9f8620408b5a15bc19 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15454 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Handle CAR sizes other than 1 MiBAndrey Petrov
Since whole L2 (1MiB) is not used, it is possible to shrink CAR size to 768 KiB. Since 768 KiB is not power of two, 2 MTRRs are used to set it up. This is a part of CQOS enabling. BUG=chrome-os-partner:51959 Change-Id: I56326a1790df202a0e428e092dd90286c58763c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-19soc/intel/apollolake: use SPI flash boot_device_rw() for ealy stagesAaron Durbin
If the boot device is SPI flash use the common one in the early stages. While tweaking the config don't auto select SPI_FLASH as that is handled automatically by the rest of the build system. BUG=chrome-os-partner:56151 Change-Id: If5e3d06008d5529dd6d7c05d374a81ba172d58fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16201 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-15soc/intel/apollolake: don't include all SPI flash driversAaron Durbin
The SPI host controller for the SPI boot device doesn't allow normal probing because it uses the hardware sequencer all the time. Therefore, it's pointless to include unnecessary SPI flash drivers. BUG=chrome-os-partner:56151 Change-Id: I04551fdb0b207c7ec2f1f171cff62ed7334a5ad5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16188 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-04soc/apollolake: Return correct wake status in _SWSShaunak Saha
Wake status is calculated from the four pairs of gpe0 in cbmem CBMEM_ID_POWER_STATE which is filled very early in romstage and depends on the routing information in PMC GPE_CFG register. Coreboot sets the proper value of routing based on devicetree from pmc_init. But when system goes to S3 on waking up PMC is writing default values again in GPE_CFG which results in returning wrong wake status in _SWS. This patch corrects that behaviour by correcting the gpe0 pairs in cbmem after PMC sets the routing table in resume path. BUG=chrome-os-partner:54876 TEST=On resume through powerbtn, lidopen, keyboard press, etc. we are getting proper wake status. Change-Id: I5942d5c20d8c6aef73468dc611190bb7c49c7c7a Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16040 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-25intel/apollolake: Select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOTFurquan Shaikh
This allows the board to save the recovery request in case of unexpected reboots caused by FSP. BUG=chrome-os-partner:55431 Change-Id: If71802d2cba52a426f4c2db90d6c5384ed03ce68 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-15soc/intel/apollolake: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: Icaca9367b526999f0475b21dd968724baa32e3f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15667 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-02soc/intel/apollolake: Add function to translate gpio_t into ACPI pinDuncan Laurie
There are four GPIO communities in this SOC and they are implemented as separate ACPI devices. This means the pin number that is used in an ACPI GPIO declaration needs to be relative to the community that the pin resides in. Also select GENERIC_GPIO_LIB in the SOC Kconfig so this function actually gets used. This was tested on the reef mainboard by verifying the output of the SSDT for the Maxim 98357A codec that the assigned GPIO_76 is listed as pin 0x24 which is the value relative to the Northwest community. Change-Id: Iad2ab8eccf4c91185a075ffce8d41c81f06c1113 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15513 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-02soc/intel/apollolake: Add support for LPSS I2C driverDuncan Laurie
Support the I2C interfaces on this SOC using the Intel common lpss_i2c driver. The controllers are supported in pre-ram environments by setting a temporary base address in bootblock and in ramstage using the naturally enumerated base address. The base speed of this controller is 133MHz and the SCL/SDA timing values that are reported to the OS are calculated using that clock. This was tested on a google/reef board doing I2C transactions to the trackpad both in verstage and in ramstage. Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15480 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01soc/intel/apollolake: add initial NHLT supportSaurabh Satija
Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-24Revert "intel/apollolake: Use custom reset calls"Andrey Petrov
Looks like we need to do real cold reset in some FSP flows, so reverting this. This reverts commit 6f762171de4b8514fddd430052cbf24524e09e5d. Change-Id: Ie948d264c4e2572dab26fdb9462905247a168177 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15331 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-12intel/apollolake: Use custom reset callsFurquan Shaikh
Due to USB LDO issue in current steppings, cold reboot needs to be temporarily disabled. Thus, hard_reset call should be the same as soft_reset. Once future steppings are available INTEL_COMMON_RESET can be enabled again. Change-Id: If0ec56db3864d500acc93d2b363a78a6cd7632da Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15143 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-08soc/apollolake: Add SOC specific c-state tableHannah Williams
Please refer Apollolake BIOS Writers Guide Change-Id: I5f82cdc4b34a53b5184ef1e918cae15a1df6cc5e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15051 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-01soc/intel/apollolake: add support for IFWI regionFurquan Shaikh
On apollolake, the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. This region is referred to as the IFWI. Add support for writing the IFWI to a specified FMAP region to accommodate such platforms. Change-Id: Ia61f12a77893c3dd3256a9bd4e0f5eca0065de26 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14999 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27soc/intel/apollolake: add support for verstageAaron Durbin
There previously was no support for building verstage on apollolake. Add that suport by linking in the appropriate modules as well as providing vboot_platform_is_resuming(). The link address for verstage is the same as FSP-M because they would never be in CAR along side each other. Additionally, program the ACPI I/O BAR and enable decoding so sleep state can be determined for early firmware verification. Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14972 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-25soc/apollolake: SOC specific SMM codeHannah Williams
Add SMI handlers that map to SOC specific SMI events Update relocation_handler in mp_ops Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/14808 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-23soc/intel/apollolake: add support for writing logical boot partition 2Aaron Durbin
On apollolake the boot media layout is different in that the traditional "BIOS" region contains another data structure with the boot assets such as CSE firmware, PMC microcode, CPU microcode, and boot firmware to name a few. There's also a sort of recovery mechanism where there is a second data structure with similar contents halfway through the "BIOS" region. This second structure is referred as the logical boot partition 2 (LBP2), and it's optionally employed. Add support for writing the LBP2 to a specified FMAP region to accommodate platforms which require it. Change-Id: I1959a790f763b409238dea6b62408b42122e590e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14924 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-19soc/intel/apollolake: Relocate FSP-M during insertion in CBFSAndrey Petrov
Since FSP-M is run in CAR (as opposed to XIP), its default link address may need to be changed. Since cbfstool can relocate FSP blobs, take advantage of that feature. Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14866 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-18soc/intel/apollolake: Work around FSP-M CAR layoutAndrey Petrov
As of now FSP-M can not be relocated and it can not be instructed to use a specific resource for temporary memory. As result coreboot is forced to use CAR layout dictated by default FSP-M configuration. Change CAR size to 1MiB, link romstage at such CAR address so it doesn't overlap with FSP-M's default heap/stack. Change-Id: I56f78f043099dc835e294dbc081d7506bfad280d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14804 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-18soc/intel/apollolake: Take advantage of common opregion codeAndrey Petrov
Change-Id: I2d16336513bcd5a0544a6b68b609e40dd7c141fb Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14807 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-12soc/intel/apollolake: use common FADT infrastructureAaron Durbin
Instead of having the mainboards duplicate the same boilerplate code utilize the common FADT infrastructure to reduce duplication. Change-Id: If824619fd619433974e588050a933d2c19b97ec8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14779 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-09soc/intel/apollolake: Select no stage caching for resumeFurquan Shaikh
Select NO_STAGE_CACHE so that ramstage is not cached for resume. Change-Id: I9ca71686e0f617bb24713ec9ba07b5255c218f66 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09xip: Do not pass --xip for early stages if CAR supports code executionFurquan Shaikh
On modern x86 platforms like apollolake, pre-RAM stages verstage and romstage run within the cache-as-ram region. Thus, we do not need to pass in the --xip parameter to cbfstool while adding these stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is default false for all x86 platforms. Apollolake selects this option since it supports code execution with CAR. Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>