coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2021-02-11	src: Remove unused <arch/cpu.h>	Elyes HAOUAS
	Change-Id: I1112aa4635a3cf3ac1c0a0834317983b4e18135a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-09	soc/amd,intel: Drop s3_resume parameter on FSP-S functions	Kyösti Mälkki
	ACPI S3 is a global state and it is no longer needed to pass it as a parameter. Change-Id: Id0639a47ea65c210b9a79e6ca89cee819e7769b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-28	soc/intel: deduplicate ACPI timer emulation	Michael Niewöhner
	The code for enabling ACPI timer emulation is the same for the SoCs SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to common code. APL differs in not having the delay settings. However, the bits are marked as "spare" and BWG mentions there are no "reserved bit checks done". Thus, we can write them unconditionally without any effect. Note: The ACPI timer emulation can only be used by SoCs with microcode supporting CTC (Common Timer Copy) / ACPI timer emulation. Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-26	soc/intel: drop unneeded ISST configuration code	Michael Niewöhner
	The code configuring ISST (Intel SpeedShift Technology) sets the ISST capability bits in CPUID.06H:EAX. It does not activate HWP (Hardware P-States), which shall be done by the OS only. Since the capability is enabled by default (opt-out), there is nothing to do for us in the enabled-case. Practically speaking, there is no value at all in disabling the capability, since one can configure the OS to not enable HWP if that is desired. The two other bits for EPP and HWP interrupt that were set by the code are not set anymore, too. It was tested, on three platforms so far (CML-U, KBL-H, SKL-U), that these are set as well by default in the MSRs reset value (0x1cc0). To reduce complexity and duplicated code without actual benefit, this code gets dropped. The remaining dt option will be dropped in CB:46462. Test: Linux on Supermicro X11SSM-F detects and enables HWP: [ 0.415017] intel_pstate: HWP enabled Change-Id: I952720cf1de78b00b1bf749f10e9c0acd6ecb6b7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46460 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24	{cpu,soc}/intel: deduplicate cpu code	Michael Niewöhner
	Move a whole bunch of copy-pasta code from soc/intel/{bdw,skl,cnl,icl, tgl,ehl,jsl,adl} and cpu/intel/{hsw,model_*} to cpu/intel/common. This change just moves the code. Rework is done in CB:46588. Change-Id: Ib0cc834de8492d59c423317598e1c11847a0b1ab Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46274 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21	soc/intel: convert XTAL frequency constant to Kconfig	Michael Niewöhner
	This converts the constant for the XTAL frequency to a Kconfig option. Change-Id: I1382dd274eeb9cb748f94c34f5d9a83880624c18 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-03	soc/intel/alderlake/ramstage: Do initial SoC commit till ramstage	Subrata Banik
	List of changes: 1. Add required SoC programming till ramstage 2. Include only required headers into include/soc 3. Add CPU, PCH and SA EDS document number and chapter number 4. Fill required FSP-S UPD to call FSP-S API Change-Id: I3394f585d66b14ece67cde9e45ffa1177406f35f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>