summaryrefslogtreecommitdiff
path: root/src/soc/broadcom
AgeCommit message (Collapse)Author
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-16src/soc: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I2e7b756296e861e08cea846297f687a880daaf45 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-05-24soc/broadcom/cygnus: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I48b242dd6226e392ed0f403051843b3ae02cd9a4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18uart: Fix bug in {uart8250, uart8250_mem, ns16550}_rx_byte functionsWerner Zeh
We have several different UART implementations of which three support a timeout when receiving characters. In all of these three implementations there is a bug where when the timeout is hit the last received character will be returned instead of the needed 0. The problem is that the timeout variable i is decremented after it has been checked in the while-loop. That leads to the fact that when the while-loop is aborted due to a timeout i will contain 0xffffffff and not 0. Thus in turn will fool the following if-statement leading to wrong return value to the caller in this case. Therefore the caller will see a received character event if there is none. Change-Id: I23ff531a1e729e816764f1a071484c924dcb0f85 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17soc/broadcom/cygnus: Update DDR KconfigMartin Roth
The DDR speed Kconfig symbols needed to either be added to the Kconfig tree, or have the code associated with them removed. I chose to add the symbols. - Add symbols for DDR333 - DDR667 to cygnus Kconfig. These should be selected by the mainboard. - Rename symbols from DDRXXX to CYGNUS_DDRXXX to match the existing CYGNUS_DDR800 symbol. - Rename the non Kconfig #define CONFIG_DRAM_FREQ to CYGNUS_DRAM_FREQ because having other #defines look like Kconfig symbols is confusing. - Change #ifdef CONFIG_DDRXXX to use IS_ENABLED Change-Id: I3f5957a595072434c21af0002d57ac49b48b1e43 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2016-08-31soc/broadcom/cygnus/ddr_init.c: Correct typo in POWER ON and POWER OK.Elyes HAOUAS
Change-Id: I5b69a8429eb2f7add08bc134d5d2366a1afe6a4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16343 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-28src/soc: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16325 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-21soc/*: fix uart's regwidth specification in cbtablesPatrick Georgi
coreboot passes information about the serial port implementation to payloads through a cbtables entry. We set the register width to 1 on most SoCs because that looked as good a default as any, but checking the uart structs they use, it's 4 for all of them. Change-Id: I9848f79737106dc32f864ca901c0bc48f489e6b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13746 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
This patch generalizes the approach previously used for ARM32 TTB_SUBTABLES to "auto-detect" whether a certain region was defined in memlayout.ld. This allows us to get rid of the explicit Kconfig for the TIMESTAMP region, reducing configuration redundancy and avoiding confusion when setting up future boards. (Removing armv4/bootblock_simple.c because it references this Kconfig and it is a dead file that I just forgot to remove in CL:12076.) BRANCH=None BUG=None TEST=Booted Oak and confirmed that all pre-RAM timestamps are still there. Built Nyan and Falco. Change-Id: I557a4b263018511d17baa4177963130a97ea310a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
When we first added ARM support to coreboot, it was clear that the bootblock would need to do vastly different tasks than on x86, so we moved its main logic under arch/. Now that we have several more architectures, it turns out (as with so many things lately) that x86 is really the odd one out, and all the others are trying to do pretty much the same thing. This has already caused maintenance issues as the ARM32 bootblock developed and less-mature architectures were left behind with old cruft. This patch tries to address that problem by centralizing that logic under lib/ for use by all architectures/SoCs that don't explicitly opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option). This works great out of the box for ARM32 and ARM64. It could probably be easily applied to MIPS and RISCV as well, but I don't have any of those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and leave that for later cleanup. BRANCH=None BUG=None TEST=Built Jerry and Falco, booted Oak. Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-02broadcom/cygnus: remove verstage.cAaron Durbin
The file was not referenced or used. Kill it. BUG=chrome-os-partner:44827 BRANCH=None TEST=None Change-Id: I30285d523ef3ca4dd3ce38b53aeb42862d929c90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11775 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22linking: link bootblock.elf with .data and .bss sections againAaron Durbin
Currently coreboot expects the loader to clear the bss section for all stages. i.e. stages don't clear their own bss. On ARM SoCs the BootROM would be responsible for this. To do that one needs to include the bss section data (all zeros) in the bootblock.bin file. This was previously being attempted by keeping the .bss info in the .data section because objcopy happened zero out non-file allocated data section data. Instead go back to linking bootblock with the bss section but mark the bss section as loadable allocatable data. That way it will be included in the binary properly when objcopy -O binary is emplyed. Also do the same for the data section in the case of no non-zero object values are in the data section. Without this change the trick of including .bss in .data was not working when there wasn't a non-zero value object in the data section. BUG=None BRANCH=None TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains the cleared bss. Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09verstage: use common program.ld for linkingAaron Durbin
There's no reason to have a separate verstage.ld now that there is a unified stage linking strategy. Moreover verstage support is throughout the code base as it is so bring in those link script macros into the common memlayout.h as that removes one more specific thing a board/chipset needs to do in order to turn on verstage. BUG=chrome-os-partner:44827 BRANCH=None TEST=None Change-Id: I1195e06e06c1f81a758f68a026167689c19589dd Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11516 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-08broadcom/cygnus: returning from verstage without having one is uselessPatrick Georgi
Change-Id: I488b74b73a7654e97958a80fa7c83258fea3e959 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-12Change #ifdef and #if defined CONFIG_ bools to #if IS_ENABLED()Martin Roth
Kconfigs symbols of type bool are always defined, and can be tested with the IS_ENABLED() macro. symbol type except string. Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-08memlayout: Add timestamp regions for t210 and cygnusStefan Reinauer
This is needed to make those SOCs compile with timestamps enabled. Change-Id: Iac20cb9911e1c76a18c8530385c9d7b8b46399e5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10833 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-06-21Remove obsolete EARLY_CONSOLE usageMartin Roth
The EARLY_CONSOLE Kconfig symbol was removed in commit 48713a1b - console: Drop EARLY_CONSOLE option The arm64 and mips directories don't even have early_console.c to include. Change-Id: Idc60ffb2bac2b180f4fdd0adf5c411e1f692a846 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10615 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-21Remove old HAVE_UART_MEMORY_MAPPED select statementsMartin Roth
The HAVE_UART_MEMORY_MAPPED symbol is no longer present, so these don't actually select anything. Change-Id: I6d0eb610e48a4506ac7449ac677ee67981d0ff0d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10608 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02cbfs: new API and better program loadingAaron Durbin
A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
DYNAMIC_CBMEM is only selected a couple of times but never declared or read. Remove it. Change-Id: I5016dac2c935d3f261001e9f388a8989540e93ae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10255 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere (with no overlap), and never read. Remove it. Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10253 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-05vboot: remove uses of vboot2_verify_firmware()Aaron Durbin
The vboot mechanism will be implemented within the program loader subsystem to make it transparent to mainboards and chipsets. Change-Id: Icd0bdcba06cdc30591f9b25068b3fa3a112e58fb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10094 Tested-by: build bot (Jenkins)
2015-04-29kbuild: automatically include SOCsStefan Reinauer
This change switches all SOC vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in soc/Makefile.inc or in soc/<vendor>/Makefile.inc. This means, vendor and SOC directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9799 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-27Cygnus: add TrustZone functions and set everything non-secure in bootblockCorneliu Doban
To allow an OS to run in non-secure mode: - Set all peripherals and system components non-secure except SOTP and TZPC. - Set all memory non-secure (ROM, SRAM, DDR, flash). - Enable A9 access to entire M0 address space except M0 ROM. BUG=chrome-os-partner:37533 BRANCH=broadcom-firmware TEST=boot kernel from usb stick Change-Id: I3bbd288863923011ff1413be353ac4b178ffdd07 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6de56bbe73ed8d87ad572da711a193985ee68e3a Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/212735 Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: Ibac7de03a72a98fbd95659d0113833049b4871a5 Original-Reviewed-on: https://chromium-review.googlesource.com/266593 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9985 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: Enable DDR auto self-refreshIcarus Chau
Enable auto entry and auto exit self-refresh. Configure entry idle time to 16x long count sequences. Where a long count sequence is 1024 cycles. The idle entry configuration is based on 32x of the DLL lock time (512 cycles). A conservative setting to help minimize self-refresh enter/exit thrashing. BUG=chrome-os-partner:36456 BRANCH=broadcom-firmware TEST=When enable configuration CYGNUS_SDRAM_TEST_DDR, print on console: sdram initialization is completed. test ddr start from 0x60000000 to 0x80000000 ... test ddr end: fail=0 Translation table is @ 02004000 Mapping address range [0x00000000:0x00000000) as uncached Change-Id: Ibad220429fd52ead2933db03bec1a555f9385e53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3768f82ca268fb854f8c4753916518a1efdf887d Original-Reviewed-on: https://chrome-internal-review.googlesource.com/212125 Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Signed-off-by: Icarus Chau <ichau@broadcom.com> Original-Change-Id: Icac1e12745d048b32e1804a546f6b49c8b5953c0 Original-Reviewed-on: https://chromium-review.googlesource.com/265862 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9930 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: add specific controller initialization to corebootCorneliu Doban
BUG=chrome-os-partner:37533,chrome-os-partner:35814 BRANCH=broadcom-firmware TEST=bootblock initialize Cygnus HW successfully Change-Id: I93b97d7b26f6bacd8fab3d6bc52ec52e92e91a43 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8679570c6607ed6964f46df618fe8d0d22fcb2c0 Original-Reviewed-on: https://chrome-internal-review.googlesource.com/211695 Original-Tested-by: Corneliu Doban <cdoban@broadcom.com> Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com> Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Commit-Queue: Corneliu Doban <cdoban@broadcom.com> Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com> Original-Change-Id: I62d354bce71aba8d5074f5385616a1265bd604df Original-Reviewed-on: https://chromium-review.googlesource.com/265861 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9929 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: add usb phy driverDaisuke Nojiri
The code originates from https://github.com/Broadcom/cygnus-linux/commit/d0752a61273decb16db0fe8d09291f9cc326ed24. BUG=chrome-os-partner:37439 BRANCH=purin TEST=booted kernel from a usb stick on the ref board Change-Id: I51ecf4e1d6890e4286402c26721f4d063ab04711 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fac506e758cb63a947bbdcfbddf9b8edecf7cd2f Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/202386 Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I027affea293af8744c997a2ed3dec741977bd328 Original-Reviewed-on: https://chromium-review.googlesource.com/264560 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/9918 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: add secimage and sign bootblockDaisuke Nojiri
secimage is a tool which adds a header and signature to the binary first loaded by the soc. ARM core frequency is set to 1 Ghz. BUG=chrome-os-partner:36421 BRANCH=broadcom-firmware TEST=booted b0 board Change-Id: Ia08600d45c47ee4f08d253980036916e44b0044a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36284d1b242c26b0b5aac2894f7ed1790da1ef15 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/197155 Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: Iaddd24006b368c8f37e075cb51e151e985029f3b Original-Reviewed-on: https://chromium-review.googlesource.com/264417 Reviewed-on: http://review.coreboot.org/9914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: Implement I2C driverAnatol Pomazau
BUG=chrome-os-partner:35810 BRANCH=purin TEST=Enable I2C1, reset devboard codec, read a register. Here is the code that demonstrates how I2C works: i2c_init(1, 100*KHz); mdelay(50); int rc = i2c_writeb(1, 0x18, 1, 0x80); // reset codec printk(BIOS_INFO, "I2C reset rc=%d\n", rc); mdelay(50); uint8_t data = 0; rc = i2c_readb(1, 0x18, 43, &data); printk(BIOS_INFO, "I2C read rc=%d data=%x\n", rc, data); // data == 0x80 Change-Id: I0d202f8b0375b5ccd9f71b23fb0cadd5a70ae779 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6bbe9afe3dccd104f39c2c286d3765a28ea20141 Original-Signed-off-by: Anatol Pomazau <anatol@google.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/195706 Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com> Original-Reviewed-by: Anatol Pomazau <anatol@google.com> Original-Commit-Queue: Anatol Pomazau <anatol@google.com> Original-Tested-by: Anatol Pomazau <anatol@google.com> Original-Change-Id: I178acef9de18fa854983294edcd2c05886795e2a Original-Reviewed-on: https://chromium-review.googlesource.com/263496 Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9908 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: Enable gpio on romstageIcarus Chau
BUG=chrome-os-partner:35936 BRANCH=broadcom-firmware TEST=When enable configuration CYGNUS_GPIO_TEST, print on console: Start gpio test... [gpio_crmu] gpio:0 set input [gpio_crmu] gpio:0 set pullup:0 GPIO get 170=0 gpio request enable pin=64 offset=0x1c .... GPIO set 69=1 [gpio_asiu] gpio:45 set, value:0 GPIO set 69=0 Gpio test completed... Additional test: Measure on GPIO 69 to confirm the voltage change. Apply voltage on AON_GPIO0 to check reading. Change-Id: I634cffccc7f0fa198317a92e3f1670ae6828892e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4784e5d88b9f7acb70bd6f6b12b1096f092f34b8 Original-Signed-off-by: Icarus Chau <ichau@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204537 Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: Ia4f833be80d7844c2d014c9ffcf587d385e7766c Original-Reviewed-on: https://chromium-review.googlesource.com/263495 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9907 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22soc: select generic gpio lib on (almost) all non-x86 SOCsStefan Reinauer
BOARD_ID functionality is not what requires the GPIO lib, but it is the mainboard specific implementations that do. The option essentially says whether the SoC provides <soc/gpio.h> (with the interface required by the common GPIO code). Right now, x86 and Samsung's Exynos SOCs don't have support for this interface. So this should be selected by the SOC, not by BOARD_ID_SUPPORT. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> BUG=none BRANCH=none TEST=emerge-storm coreboot still successfully compiled an image Change-Id: I0ce2bd7ce023f22791d31a6245833b61135504b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0dd4dea521372194eedf11b077d95fd3b15ad9f7 Original-Change-Id: I3dea6c2fb42a23fcb9d384c3bbfa7fc8e217be2d Original-Reviewed-on: https://chromium-review.googlesource.com/262743 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9899 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: add timestamps in pre-ram stagesDaisuke Nojiri
BUG=none BRANCH=broadcom-firmware TEST=timestamp table: 0501: 31858 0005: 106680 0503: 132098 0504: 135573 0006: 168656 0013: 168660 0014: 240487 0502: 240491 0001: 240515 0002: 247544 0003: 537158 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://chrome-internal-review.googlesource.com/204758 Reviewed-by: Julius Werner <jwerner@chromium.org> Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Tested-by: Daisuke Nojiri <dnojiri@google.com> Change-Id: I5b4608152e97d53e35d28aa7bed2bfd158409df9 Reviewed-on: https://chromium-review.googlesource.com/256418 Reviewed-on: http://review.coreboot.org/9855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/purin: add DMA coherent regionDaisuke Nojiri
BUG=none BRANCH=broadcom-firmware TEST=boot to depthcharge Change-Id: Id10437c12e219e07121395abd442d53b3b56c7be Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f33e9218ca8df1d149761c09253c30837b607433 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204757 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I93def9c326cc8b4fea69078987bddf09d9f2a797 Original-Reviewed-on: https://chromium-review.googlesource.com/256417 Reviewed-on: http://review.coreboot.org/9854 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: Initialize dram in romstage.Icarus Chau
BUG=chrome-os-partner:36456 BRANCH=broadcom-firmware TEST=When enable configuration CYGNUS_SDRAM_TEST_DDR, print on console: sdram initialization is completed. test ddr start from 0x60000000 to 0x80000000 ... test ddr end: fail=0 Translation table is @ 02004000 Mapping address range [0x00000000:0x00000000) as uncached Change-Id: I88dc2f0c504e2a152133edd442c3d776dd73d37e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 376471751d6980f99bbe47faad193c79a05fa69f Original-Signed-off-by: Icarus Chau <ichau@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199775 Original-Commit-Queue: <ichau@broadcom.com> Original-Tested-by: <ichau@broadcom.com> Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Change-Id: I47bc5d9ec147cc8bfbd893e8c0d7e5fc5e401771 Original-Reviewed-on: https://chromium-review.googlesource.com/256416 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21broadcom/cygnus: Fix missing writel->write32 transformationPatrick Georgi
cygnus' serial driver wasn't part of the tree when the big transformation was done, so follow up. Change-Id: Ic1a53bea9bcaf1e568b50b9c2ad7782e65e36328 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9852 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21cygnus: add QSPI driverCorneliu Doban
The driver uses the MSPI controller to read/write to/from SPI flash BUG=chrome-os-partner:35811 BRANCH=boradcom-firmware TEST=bootblock loads and executes verstage Change-Id: I34c7882170e4f89bee1b6001563c09b16dfea8ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c3b156019df429e9d12728224ed4eec8436f415 Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199776 Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Tested-by: Corneliu Doban <cdoban@broadcom.com> Original-Commit-Queue: Corneliu Doban <cdoban@broadcom.com> Original-Change-Id: Ice798ec76011ee47e13174b4c5534b0d0bc8b4ad Original-Reviewed-on: https://chromium-review.googlesource.com/256414 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-20Kconfig: rename CONSOLE_SERIAL_UART to DRIVERS_UARTPatrick Georgi
Some upstreaming patches missed that, so follow up. Change-Id: I28665c97ac777d8b0b0f909e64b32681ed2b98f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9771 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-04-20purin: add ns16550 driverDaisuke Nojiri
BUG=chrome-os-partner:35807 BRANCH=broadcom-firmware TEST=booted b0 board. messages printed on console: coreboot-bcf5dc0-dirty bootblock Mon Feb 9 13:33:55 PST 2015 starting... Exception handlers installed. Change-Id: I271ead2f4fe48b809fd311acd5a27a675dce549e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ddff8fb170e775a121150fce065410d2925ad18c Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ia6e82fa89547d61745c1473f723897dc3c1296ef Original-Reviewed-on: https://chromium-review.googlesource.com/251301 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9765 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-20console: copy ns16550 driver from u-bootDaisuke Nojiri
BUG=chrome-os-partner:35807 BRANCH=broadcom-firmware TEST=none Change-Id: I40623e92f290e5c584a451d99071316b6fc35431 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 505720f734da7a4cdfaff8b2531385644141ba83 Original-Change-Id: I655c7065047971ab05a13e90ab911d7464a37552 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/251300 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9764 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17cygnus: enable mmuDaisuke Nojiri
this is not only for speed but also preventing the cpu from crashing. the cpu is not happy when cache is cleaned without mmu turned on. BUG=chrome-os-partner:36691 BRANCH=broadcom-firmware TEST=boot purin to romstage. Change-Id: I2445dcc2729798c4fc56fa191cbc8471ef708d08 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9e35c925b75213e1d35bf191f22c39aaf1726eeb Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Icaf8c506df258edb99413949e6e3089a2b1a91af Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199388 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/251306 Reviewed-on: http://review.coreboot.org/9768 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17cygnus: configure memlayoutDaisuke Nojiri
we also pick no RETURN_FROM_VERSTAGE. BUG=none BRANCH=broadcom-firmware TEST=booted b0 board Change-Id: Iddd95f233a614187ae6b26f351a289c23f25742f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 243598925333982b40297adad878c461990d7d70 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I6ab96628cecb84e061777cc85d6d572823f6d63c Original-Reviewed-on: https://chromium-review.googlesource.com/251303 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9767 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17cygnus: add timer functionsDaisuke Nojiri
this implements udelay. BUG=chrome-os-partner:36011 BRANCH=broadcom-firmware TEST=measured 10 sec of delay by stopwatch Change-Id: I833b71fac98a871bff71478221a55e1ca15c13df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 137456e63931052f80247b72f98f958afdba8a27 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ib5e33a19421eae900800fce94e9fd51bc2c665c4 Original-Reviewed-on: https://chromium-review.googlesource.com/251302 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9766 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17broadcom/cygnus: add new SoC driverDaisuke Nojiri
This commit covers bootblock and romstage. BUG=none BRANCH=tot TEST=ran emerge-purin coreboot Change-Id: I88e2dffb9e46ba5b066190e844a6a7302adcfdc7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3af6343a74263f086fe82c600559e8204e7dec0 Original-Change-Id: I447ed5f6ed181cfc9d5521b8c57e5fe0036a3f71 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242854 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9750 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 06:11:36 +0000