Age | Commit message (Collapse) | Author |
|
If an AMD FSP binary has no valid image revision information, print a
warning instead of an error.
Change-Id: Ie9c5a387b81205fe93382778090260e41e261776
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62349
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add xhci 2 controller support for additional USB port/ Dummy setting
BUG=b:214413631
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I5c8885bf46ddbfc85b31585a4da7f746c1a6bcd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
We print these out in the normal flow, so lets add them for S0i3 resume
as well.
BUG=b:221231786
TEST=Perform suspend/resume cycle on guybrush and verify we get the new
POST codes.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia7d607453d58084868cfa50770fd0f370b2ea2bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62346
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This feature was never used. Let's remove it to keep things simple.
BUG=221231786
TEST=Boot test guybrush and morphius and verify transfer buffer is
correctly passed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I93a284db919f82763dcd31cec76af4b773eb3f80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and
the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO
region which is 0xfed00000 on all chipsets and SoCs in the coreboot
tree. Since these two different constants are used in different places
that however might end up used in the same coreboot build, drop the
Kconfig option and use the definition from arch/x86 instead. Since it's
no longer needed to check for a mismatch of those two constants, the
corresponding checks are dropped too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000,
so define this once in arch/x86 and include this wherever needed. The
old AMD AGESA code in vendorcode that has its own definition is left
unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common
definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
When "fadt->FADT_MinorVersion" is not explicitly set to the right value, gcc sets it up to "0".
So set it correctly for treewide.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ic9a8e097f78622cd78ba432e3b1141b142485b9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Lance Zhao
|
|
The AMD SoCs had a check to make sure that HPET_ADDRESS_OVERRIDE isn't
set so that the HPET_ADDRESS Kconfig option will have the right default
value. Instead check if the HPET_ADDRESS Kconfig value matches the
HPET_BASE_ADDRESS define in the SoC code which is the case if
HPET_ADDRESS_OVERRIDE isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icf1832eb36c031e93ba24f342e9a8a7bf13faecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62275
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SoC-specific I2C code and header file have been verified some time
ago, but it seems that I forgot to remove the corresponding TODOs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd162bda10e5993bc32db3a77588491397e3c19e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using __fallthrough instead of a comment about the fall-through being
intentional should make clang stop complaining about intended fall-
through statements.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I940529be02e20c72f6e97b2cfa10f0dd8f7020b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Change-Id: Ie9dbed7d6dd1e5f0c97d4a6cedea3d6bd7b000a2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
Add the information of substance and instance in the string for PMUI
and PMUD. It is amdfwtool's job to extract the number from the string.
Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I8b209da90b5a591f62e760961c64c4c63e6ef65b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I6a0e9b33c6a1045a3a4a6717487525b82d41e558
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Compiling efs_fmap_check.c depends on fmap_config.h already being
generated, so add this dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85e0900574f928d1594f8d1831ba58f959b75d27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Also add the Makefile dependency on the fmap_config.h file to make sure
that this file already exists when it's included.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I540ea2c14fd187845efd3c0c8c1e4b8f82c8cac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP. An example of
implementation within Linux kernel is available [1].
There is a need to introduce new ACPI_ID ("AMDI0019") so that dedicated
driver on OS side can bind to it and handle this special setup. Since
PSP takes care of I2C controller power management, we need to remove
PowerResource object from DSDT.
BUG=b:204508404
BRANCH=guybrush
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Iccfc09d8c580d7ab2acb69d26b9c293cf625fb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61863
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Spaces before tabs are not allowed.
Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The and-mask passed to the gpio_update32 call needs all 32 bits to be
set to ones. When building as 32 bit binary the -1UL will result in the
needed bit mask, but for a 64 bit build the constant would have 64 bits
set to ones which then gets truncated to 32 bits causing a compiler
error. Use 0xffffffff as bit mask instead which behaves correctly in
both cases and also clarifies what this is doing.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b6a50bd914fdbb7a78885efb6c610715e2d26c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62053
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a build failure when trying to build the code in 64 bit mode.
TEST=Timeless build for Chausie results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8fe7b626d9d72c0b8ed07ced93e46f795e36848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
We only allow index = {0, 1}. Fix the check.
BUG=b:215599230
TEST=Build guybrush
BRANCH=guybrush
Found-by: Coverity CID 1469611
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I59615ab39faeded43b3803b4450c84ab8a8b81ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61988
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PSP command to send SPL fuse command if PSP indicates SPL fusing
is required. Also add Kconfig option to enable sending message.
BUG=b:180701885
TEST=On a platform that supports SPL fusing. Build an image with an SPL
table indicating fusing is required, confirm that PSP indicates fusing
required and coreboot sends the appropriate command. A message indicating
PSP requested fusing will appear in the log: "PSP: Fuse SPL requested"
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Change-Id: If0575356a7c6172e2e0f2eaf9d1a6706468fe92d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
|
|
Select ACP gen2 for Sabrina
Change-Id: I107ebd390732b597629a3236d0e7d1f5e2c51379
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The gen2 ACP register definitions and locations are different from
previous models. Specific code is refactored into acp_gen1 and acp_gen2.
Update ACP register locations and definitions for gen2.
Change-Id: If665b93cddf22435512f1276fcfee2f497dc6ef5
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since the APIC bus isn't used since a long time and the IOAPIC and LAPIC
talk to each other via the system bus, there is no longer the
requirement that the IOAPIC IDs mustn't overlap with the LAPIC IDs that
start at 0 and end at CONFIG_MAX_CPUS - 1. The current Intel code uses 2
as the IOAPIC ID while most of their CPUs have more than 2 logical cores
resulting in the IOAPIC having the same ID as one of the LAPICs.
All chipsets in soc/amd use the defines for FCH_IOAPIC_ID and
GNB_IOAPIC_ID for initializing the IOAPIC register, writing both MADT
and IVRS ACPI tables and there's no MPTable support for those SoCs that
might also rely on those IDs being consistent.
This patch changes the definitions for FCH_IOAPIC_ID and GNB_IOAPIC_ID
from CONFIG_MAX_CPUS and CONFIG_MAX_CPUS + 1 to 0 and 1. This also makes
sure that the IOAPIC IDs still fit in 4 bits despite Cezanne having a
CONFIG_MAX_CPUS of 16 resulting in the IOAPIC IDs being larger than 4
bits with the old code. While the Cezanne FCH IOAPIC supports 8 bits of
IOAPIC IDs, this is non-standard.
TEST=AMD Mandolin and Google Liara still work.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: Id3a356480bb8407e0347cb5cef691fde7edc8deb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
FCH_UART_ID_MAX == 2, and there are 2 UARTS, so we don't need the -1.
BUG=b:215599230
TEST=Build guybrush
Found-by: Coverity CID 1469611
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5f0171ed2d3da7f86ba3cfd0457f60d2d5722625
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61869
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:216096562
Change-Id: I4a5ee335ea8808b595dc65ebafd15baedfbdd06e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Scan devices behind SoCs GPU controller to expose more buses.
BUG=b:204401306
BRANCH=guybrush
TEST=emerge-guybrush coreboot
Change-Id: Ib78e6570f101c71efaf9cc1843defcb05301cd30
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Refactor existing acp code into acp_gen1 variant as preparation for gen2
variant in sabrina.
Change-Id: Id9248584237196b5404b79d3a8552cb90fe4491e
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Check if FSP binary and coreboot FSP structures (fspmupd.h) match
sufficiently.
A change in minor number denotes less critical changes or additions
to the FSP API that still allow for the boot process to proceed.
A change of the AMD image revision major number will halt boot.
The Fspmupd.h header now defines IMAGE_REVISION_ macros for AMD
Picasso, Cezanne and Sabrina APUs.
BUG=b:184650244
TEST=build, boot and check fsp image revision info. Example:
FSP major = 1
FSP minor = 0
FSP revision = 5
FSP build = 0
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: I0fbf9413b0cf3e6093ee9c61ff692ff78ebefebc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
makefile variables
Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded.
This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well.
BUG=b:198322933
TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Introduce and use functions to translate eSPI IO/MMIO decode range IDs
into the corresponding register bits and the IO/MMIO range and size
register IDs into register offsets. This is a preparation to support the
additional eSPI decode ranges on Sabrina where not all enable bits and
base/size registers for one type of decode ranges are consecutive.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id91fe32447a06b049e33dfdacc8edfa2ebb2df39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This aligns the register names more with the PPR.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e7dc8dfc0fa5e86b9d4425f2496be86e039b686
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On systems that use the first 128kByte of the SPI flash for the EC
firmware, it is not possible to place the EFS/amdfw part at the lowest
location in flash where the on-chip PSP firmware will look for the EFS,
since this is at an offset of 128kByte into the flash which is where the
cbfs master header resides when the main CBFS is placed right after the
EC firmware. This patch introduces the AMD_SOC_SEPARATE_EFS_SECTION
option that allows putting the EFS in a separate FMAP section that can
be located right after the EC firmware FMAP section. The EFS FMAP
partition is checked to ensure it begins at the expected location.
Change-Id: I5ed0f76c9c9c9c180ee5f1b96f88689d0979bb5e
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Sabrina uses the same MMIO_CONF_BASE MSR as the previous AMD CPUs to
configure the PCI MMCONF base address.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e3064bab5ca1e277b04f9aae98f9adabce75399
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Now that PSP verstage can directly write to the UART, we no longer need
to manually dump the cbmem contents.
Ideally if we can get picasso to add support for mapping the UART, or
if we implement bit banging we can delete this functionality
completely.
BUG=b:215599230
TEST=Boot guybrush and verify verstage logs aren't printed twice
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id70b24625c3b2f3d6fe470cf227a0083f5b974f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This will allow PSP verstage to write logs to the serial console. We
are no longer dependent on using a serial enabled PSP boot loader.
Ideally we would delete this psp printk and use the standard printk.
Since picasso doesn't currently support mapping the UART though, I'll
keep it for now.
BUG=b:215599230
TEST=Boot guybrush and verify PSP logs are output on serial console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibd77cc754fae5baccebe7adc5ae0790c79236d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The Sabrina PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idad8e4874e78bb96730feecb5a7b17334d12217c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The Picasso PSP doesn't support mapping the UART, so add a dummy
function to return NULL.
BUG=b:215599230
TEST=Build and boot morphius
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie1f033ff86ebb0f755a9a0b6ff293aa3c8bbbeb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This will allow directly using the UART console. On PSP releases that
don't support mapping the UART, we will just return NULL which is
perfectly acceptable.
BUG=b:215599230
TEST=Boot guybrush and verify verstage can print to the console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic8d7f0fe00794a715756f92e3fb32c6b512cb8aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61607
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
SPL: Security Patch Level
The data in SPL is used for FW anti-rollback, preventing rollback of
platform level firmware to older version that are deemed vulnerable
from a security point of view.
BUG=b:216096562
Change-Id: I0aa456b8b4eec506fbb319293f0903b293325cb0
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina is compatible with the common AMD UART block and also with the
DRIVERS_UART_8250MEM_32 driver it selects.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I432414c1d501ffbd1047b378996e06d281a9fb6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Sabrina is compatible with the common AMD SOC_AMD_COMMON_BLOCK_IOMMU
code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4c2e8553fde9467ca1b5e9085e36c33d138b7156
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This comment was added with the AMD family 15h Trinity IOMMU support in
commit 88ebbeb7e2a914330c869147bacb190b4270532f and looks like a copy of
the comment about the subtractive decode ranges in the LPC device. The
IOMMU doesn't have any subtractively decoded I/O or MMIO ranges and this
is also not what the code does. This resource is the MMIO region to
configure the IOMMU instead, so fix the comment in all copies of the
IOMMU support code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e1e3a46b839b9e58b836932c1bc9b41b1b1dc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina is compatible with the common AMD ACPIMMIO function block
mapping and access functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I890375654a9cb1156e481c5586007ac81ab84120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The PM2 ACPIMMIO region should only be accessed with 8 bit accesses.
Using 16 or 32 bit read accesses will return the data from the first
byte for all 2 or 4 bytes and 16 or 32 bit write accesses will result in
only the first byte being written which is both unexpected behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5ace50d3b81b5bf3ea3b10aa02f25c58a6ea99b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Bit 23 in the PM_RST_STATUS register is called LtReset on Stoneyridge
and ShutdownMsg on Picasso/Cezanne/Sabrina. Bit 30 is reserved on
Stoneyridge and defined as SdpParityErr on the newer SoCs. Bit 31 is
only defined for Sabrina. Since the default value of undefined bits is 0
it isn't a problem to have descriptions for reserved reset status bits
on some SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0782116d327fcad3817a10eb237ac6c8294846b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Implementation for setup_lapic() did two things -- call
enable_lapic() and virtual_wire_mode_init().
In PARALLEL_MP case enable_lapic() was redundant as it
was already executed prior to initialize_cpu() call.
For the !PARALLEL_MP case enable_lapic() is added to
AP CPUs.
Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Sabrina has no SATA controller, so remove the corresponding PIRQ
mapping. This was verified with PPR #57243 Rev 1.53.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I98ffa3675c361e8a74c50ebfc37e79ae63dacc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD data fabric register access code is valid for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97fb2c6006c09297584845a83342e75058d35713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD SMU code and the common AMD SMN access code that gets
selected by the common SMU code are valid for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic220dbb2f73b89554ac7e7b7e6dc7525ae8e9faa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD FCH AOAC bit definitions and helper functions are correct
for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie791cca0dc760e53e0f5c69c63ac78270ba6ad4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina uses an identical I2C controller as Picasso and Cezanne. Also
both the type and version read-only register of the I2C controller
contain identical values.
The dma_cr, dma_tdlr, dma_rdlr and clr_restart_det registers that are
defined in the dw_i2c_regs struct in the common Designware I2C code
aren't defined in the PPRs of Picasso, Cezanne and Sabrina, but since
common DW I2C code doesn't access those, this is no problem.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90732aa98518010686f73f80bee229b13e9bc89c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
I2C bus 0..2 on Sabrina uses a different pad type which supports 1.1V
and 1.8V levels, but doesn't support 3.3V I2C levels. Compared to the
existing I2C pad control registers the bit definitions are different, so
add a separate function to configure those pads which however still has
the same function signature and is compatible with same data structs
used for the devicetree settings. PPR #57243 Rev 1.50 was used as a
reference.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie210c3437f2608d1e9fb99dcb151fc4190721375
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The I2C pad control registers of Picasso and Cezanne are identical and
the one of Sabrina is a superset of it, so factor out the functionality.
To avoid having devicetree settings that contain raw register bits, the
i2c_pad_control struct is introduced and used. The old Picasso code for
this had the RX level hard-coded for 3.3V I2C interfaces, so keep it
this way in this patch but add a TODO for future improvements.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d098a55a5c6f6e022c3896750c752e2759e101b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
No mainboard in the current tree implements mainboard_i2c_override. In a
follow-up commit the i2c_pad_control struct is introduced to be able to
make more parameters controllable by devicetree settings in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f9ed5d50d26e4623dc5888cc8af090fdd00fc03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61566
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This flag only controls eSPI init in the PSP Stage 2 Boot Loader. It
doesn't control if port 80s are written. This flag also doesn't
currently control LPC init. The PSP is currently hard coded to remove
any LPC init.
BUG=b:215425753
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idf3f0dcc216df2fd15b016f9458a208b7e15c720
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61534
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will allow verstage to write post codes.
BUG=b:215425753
TEST=Boot guybrush and verify PSP post codes are printed
22-01-31 15:12:03.214 (S3->S0)
22-01-31 15:12:03.214 03 04 0f 0e f0 f1 f2 01 10 a0 a2 <--new
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6ceee8fcb094f462de99c07aef8e96425d9c3270
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61522
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add platform_report_mode function which report current developer mode
status to the PSP. L1 widevine app in the PSP will use this information
to select key box.
BUG=b:211058864
TEST=build and boot guybrush
TEST=build picasso chrome os boards
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I04b5fcfa338b485b36f1b946203f32823385c0b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add svc_set_platform_bootmode svc to cezanne. PSP will use this
information to select proper widevine keybox.
BUG=b:211058864
TEST=build guybrush
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6bcc9e49a2b73d486cfecd7b240bf989cad94630
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55e6d93ca141b687871ceaa763bbbbe966c4b4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Commit 86302a806c5cc9b575424305e761753710417692 (soc/amd/{common,
cezanne,picasso}: Add PRE_X86_CBMEM_CONSOLE_SIZE) added this Kconfig
option before the initial commit that added soc/amd/sabrina as copy of
soc/amd/cezanne landed in the tree, so port the change forward to
Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e8df5e7b7f1ac0af772e8c565f616a68b28e29e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The corresponding mainboard design guide was used as a reference here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie61af7dab35b560d2eec1ea62058f3a4dad5cb0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The SMU message response register was moved compared to Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie384de52b1efb1d52f9018315a4b72916a4c9cee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac1b7308851c34bd1556c02af6b270e9346073e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The Sabrina SoC doesn't have the PM_ESPI_CS_USE_DATA2 bit defined in the
PM_SPI_PAD_PU_PD register. It also doesn't have a physical LPC interface
any more, so there are no LPC pins that can be reconfigured as eSPI
interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I02bc8d007901c71942475fe707637c5da7227230
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The CPPC feature isn't available on the Sabrina SoC, so drop the
corresponding code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71a1b0717571729ebca3600ac433e621cafc4e61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Also update mb/amd/chausie accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb4dcffa48c3dbdcffb66f1398b99ee96562efb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic0226afd9e7fffd6bf196f06ee6c34b6b9c92f30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There are no SATA controllers on the Sabrina SoC. The UPD field will be
removed later as a part of the initial UPD header update.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedefd9f150e5bcb78173288e5fc9f1bbd6b498cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Some of the names have slightly changed in the PPR, but I kept the
current names for consistency across all AMD SoCs in coreboot. Revision
1.50 of the PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6bda656015858a57e221b8d7819f944c21564a39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The data fabric ID table in PPR #57243 Rev 1.50 has a different IOMS0
fabric ID than Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I32890b5c03219f6ebf8180929d71ef726d382483
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since we don't need to support PCI ID remapping for finding the correct
VBIOS binary for the integrated GPU, graphics.c can be dropped for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd5b678f472b3b5888353efd057203eb641be874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Sabrina is family 17h model A0h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01e02e3491fb90941c767058986da876bdf7ca1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Compared to Cezanne there are 3 more UART controllers. Revision 1.50 of
the PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I628b1a7a0930f3409acdcabda2b864d42bf6bd23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
The GPIO and GPIO MUX mapping as well as some GPIO to GEVENT mappings
have changed compared to Cezanne. Sabrina also doesn't have a remote
GPIO bank. Revision 1.50 of PPR #57243 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb85a3d24c881055e94400d08d01505df44a07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs controllers. The PCI
interrupt index table in the new SoC's PPR #57243 Rev 1.50 doesn't
contain a PIRQ mapping for UART4. The reference code has a mapping for
this and it uses PIRQ mapping index 0x77 for UART4 and not for I2C5.
Since the I2C5 controller isn't owned by the x86 side and I didn't see
any mapping of the I2C5 controller into the x86 MMIO space, this seems
very plausible. Also add the corresponding fields to the ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44780f5bc20966e6cc9867fca609d67f2893163d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This code is common to at least all Zen-based APUs (Picasso, Cezanne,
Sabrina) and is also useful outside of the SoC-specific dynamic ACPI
table generation code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie96d4429fb6ed9223efed9b3c754e04052d7ca7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-by: Eric Peers <epeers@google.com>
|
|
The VERSTAGE region is only needed when running verstage in the x86.
This change reduces the early ram size by 512 KiB when using PSP
verstage.
BUG=none
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I45ce421397807dbb1eb48aedd05209b91e89aa4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The FSP gets these values from the UPD and sets the internal values.
The document about eDP tuning is attached in issue tracker of this
ticket, at the issue tracker b/203061533#comment6.
BUG=b:203061533
Cq-Depend: chrome-internal:4303901
Change-Id: I9b85faac4f2fa1fb2c14bb85b615346d4379baac
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Compared to Cezanne there are 3 more UARTs controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id98767197a21cb1a61f54fc9b256b10a9506c791
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Compared to Cezanne there are 3 more UARTs with DMA controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a3d255bb4976a55623f3a161e791e80f1d01c69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Let's increase this to avoid losing any logs.
BUG=b:213828947
TEST=Boot guybrush and no longer see
*** Pre-CBMEM romstage console overflowed, log truncated!
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Replace the Renoir/Cezanne PCI IDs with the Sabrina ones that were added
in commit 27b02c2eee68f4b6c8520c4737224aaaf81f137d (include/device/
pci_ids.h: add PCI IDs for AMD Family 17h Model A0h SoC).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I427df6f8e8c08fb47ae8513b6cf1085d4294e28f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Document #55758 Rev. 1.13 says that family 17h models 30h-3Fh and later
use the spi_readmode_f17_mod_30_3f struct element for SPI_MODE_FIELD and
spi_fastspeed_f17_mod_30_3f for SPI_SPEED_FIELD, so also use this for
The AMD Sabrina SoC which is family 17h models A0h-AFh.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336f9ea4a0defdf34e1af4b6d568cfe46488f75e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The Cezanne SoC code was initially started as a copy of example/min86
which only provides enough code to make the SoC code build. Then the
different parts of the real SoC support was brought in patch by patch
which also helped cleaning up and untangling the code. Since the Cezanne
SoC code is now in a rather good shape and the Sabrina SoC is similar to
the Cezanne SoC from the coreboot side, the new SoC support is started
with a copy of the Cezanne code and all the needed changes will be
applied on top of that. In order for the build not to fail due to
duplicate files, this patch does not only copy the directory, but also
replaces most instances of the Cezanne name with Sabrina. Since the
needed blobs aren't available in the 3rdparty/amd_blobs repository yet,
the Cezanne blobs are used for now so that the build will succeed. As
soon as the proper blobs will be available in that repository, the code
will be switched over to use them.
As suggested by Nico, I added a "TODO: Check if this is still correct"
comment to the beginning of every copied file and all SOC_AMD_COMMON_*
Kconfig option selects which will be removed after re-verifying that
each file and each selected common code block is still correct for the
new SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I978ddbdbfd70863acac17d98732936ec2be8fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I909f74853a37a783582471e05071bc3d07e3dcf8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change splits the size of the console transfer region and size of
the bootblock/romstage Pre-RAM console region. This allows having a
larger Pre-RAM console while not impacting the size of the PSP verstage
console.
Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in
`setup_cbmem_console`, I chose to use the offsets provided in the
transfer buffer. It would be nice to eventually do this for all the
fields in the transfer buffer.
BUG=b:213828947
TEST=Boot guybrush and verify verstage logs are no longer truncated
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I837e1f8727adefb9227ac7df2ff715245957be2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implementation is the same for all SoC that select
SOC_AMD_COMMON_BLOCK_NONCAR, so factor it out to the common AMD non-CAR
CPU support code folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I53528f0bb75e9d945740ad5065c75e7de7b5878f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61257
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I393feab8550a7124ab2982ff3d256e3491d27b4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will verify that signed verstage binaries and the bootblock code
executing agree on the transfer buffer struct size.
BUG=b:213828947
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I597e38fe0a37416ffd3bc01fd974fa8f6610a88c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This will help debugging verstage failures.
BUG=b:213828947
TEST=Boot guybrush and verify verstage logs are printed before bootblock
messages.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia60991b3e81c19c24ceb69193840dde873ef3346
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses
some of the registers directly.
BUG=b:183149183
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since we need the GPIO defines in the devicetree settings, include
gpio.h in each SoC's chip.h file which will indirectly include the
soc-specific soc/gpio.h header instead of having it indirectly included
via soc/i2c.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id26721a6b8ae94784d4a90d7ccac28fef2be36dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
The existing common AMD SoC code supports some of AMD Family 17h Model
A0h SoC's PCI devices that however have different PCI IDs. Add the new
PCI ID defines to the PCI ID lists of the common PCI drivers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I50960e502c63a2ffcfed35178c5e7c9729ef061e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|