summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2020-07-20amd/{hudson,stoney,picasso}: Drop PM2 settings from FADTAngel Pons
The PM2_CNT register block is no longer needed, as explained in some comments. While they may have been copy-pasted around a lot, they are at least true for Hudson, and it makes sense to assume that they are true for newer chipsets as well. As per the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register): This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless PM1b settings from FADTAngel Pons
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event register blocks. According to the ACPI specification, version 6.3, sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers): If the PM1b_EVT_BLK is not supported, its pointer contains a value of zero in the FADT. If the PM1b_CNT_BLK is not supported, its pointer contains a value of zero in the FADT. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with PM1b for now. So, drop unneeded writes to PM1b fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless GPE1 settings from FADTAngel Pons
None of the currently-supported chips has a GPE1 block. The ACPI spec, version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says: If a generic register block is not supported then its respective block pointer and block length values in the FADT table contain zeros. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop the addition of I2S machine device from ACP driverFurquan Shaikh
I2S machine device has its own driver now. So, this change drops the support for adding I2S machine device ACPI node from ACP driver. BUG=b:157708581 Change-Id: I9069d92ae991e05fddcc7d45a2fd21e98c3b0de8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17soc/amd/picasso: Add .scan_bus operation for ACP deviceFurquan Shaikh
This change adds `.scan_bus` device operation for ACP device to allow mainboards to add devices under it. BUG=b:157708581 Change-Id: I088bf81d7c7c5f59ade1d2f0dd24e5fc2b1ff876 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43542 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/common/gpio: Add macro for PAD_NCFurquan Shaikh
This change adds a macro `PAD_NC` for configuring no-connect pads. This configures the pad as input with pull-down. Change-Id: I47c41c88ccfebe2c5dd9a24f85a120af9c8f56b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17soc/amd/picasso: Drop _INI and OSFL methodsFurquan Shaikh
This change drops _INI and OSFL methods under \_SB since they are not doing anything useful. _INI only calls OSFL and OSFL initializes OSVR if not already initialized and returns OSVR value. However, OSVR is not used anywhere and hence both these functions can be dropped. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4f3e1c93a855006cc115087fded20bfb76c1133e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43515 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
Global variable `PMOD` that stores the interrupt mode used by OS is required by all mainboards. This change moves the variable definition to globalnvs.asl under picasso. Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC until _PIC() method is called by OS. Thus, this change also updates the default value of PMOD as 0 i.e. PIC mode. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I731c03d965882281a7a23f55894451210ba72274 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop empty method CIRQFurquan Shaikh
This change drops empty method CIRQ() from pci_int.asl. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib342dcbc52cfacbd73a8a50ee087d97562d94c97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43513 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Use read-modify-write for ACP_I2S_PIN_CONFIGFurquan Shaikh
This change uses read-modify-write to update ACP_I2S_PIN_CONFIG instead of a write operation since the other bits in the register are reserved. Change-Id: Ic64e1907858ec293c5f759e627d19c00d748a30e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43503 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Configure ACP_PME_EN and ACP_I2S_WAKE_ENAkshu Agrawal
This change adds support for configuring ACP_PME_EN and ACP_I2S_WAKE_EN using the mainboard setting for `acp_pme_enable` and `acp_i2s_wake_enable` in the devicetree. This is required to get I2S_Wake event on headset jack plug/unplug when using CODEC_GPI pad. BUG=b:146317284,b:161328042 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Change-Id: I522d7497940f499fbc3181d866f2b44e979bba7a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1969104 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43495 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
commit 56da63c3dc3f50cfac541c779b608e1bae9e635c removed overriding that field in the FADT. Change-Id: I0c8ff9ab125129dc856949c47a3a0c14e4109c73 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43417 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/common: Don't get eSPI address from PCI if not on x86Martin Roth
Exclude lpc_get_spibase() on the PSP. This also simplifies the espi_get_bar() function. BUG=b:159811539 TEST=Build & boot trembyle; Verify address in PSP & x86 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5927dd40610860b54bb35a7e5b03ddb731597745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43468 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: Get rid of VERSTAGE_SIZEMartin Roth
Currently, the code and data in psp_verstage is ~59K. Adding the code to save vbnv to the SPI rom increases that to 66K. Getting rid of VERSTAGE_SIZE allows verstage to grow as it needs to. BUG=b:161366241 TEST=Build & Boot Morphius with VBOOT_VBNV_CMOS_BACKUP_TO_FLASH enabled Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic6853b70073f9e781fc10402a2a47c9c8e0d49d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43486 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/stoneyridge: Remove unused SPI #definesMartin Roth
These #defines are not used, and conflict with #defines in amdblocks/spi.h BUG=None TEST=Build stoney platforms Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I29b77a6b21a4deda6f28f5b057988cf3921540e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
The kernel already clears this: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/acpi/acpica/hwregs.c;l=390 No reason to have the firmware do it as well. BUG=b:153001807, b:154756391 TEST=Build Trembyle, boot, suspend, and resume and didn't see any ACPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5c79fb95dc885eaef8abc4257b6ba18c1ef1b66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
PMx0EE is not defined in the Picasso PPR. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98caf0cd2d0bdcf19de2b945dcf74f5cf7354769 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16soc/amd/picasso: Drop mainboard_romstage_entry_s3Furquan Shaikh
mainboard_romstage_entry_s3() was dropped from zork (CB:43476). This function call in picasso does not do anything and hence is being dropped. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I10e15422d7eef5af9c19737c32e433718b6479d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43477 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15soc/amd/picasso/acpi: Delete unused and invalid OperationRegionsRaul E Rangel
0xc50, 0xc52, 0xc6f don't exist on Picasso. The PCI config space registers define SATA and OHCI which are at the wrong bus locations. I just remove the whole section since it's not used. We never access the PCIe Error region, or the PM2 region either. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98aee09770f1df9f553c94580c1ee00c06a9cec1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove old AOAC register definitionsRaul E Rangel
We no longer need this code. It's been added differently in CB:42473. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6fe1e465f137ba6afbf9f0dbce501b5fc845e210 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove invalid and unnecessary devicesRaul E Rangel
These devices are not referenced by anything else. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ea3c326247dce095b5ac1706dbc37f8b215a21e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15amd/picasso: rework DXIO and DDI UPD handlingFelix Held
Turning the DXIO and DDI descriptor fields in the FSP_S_CONFIG struct into arrays allows to properly iterate over the fields. BUG=b:158695393 TEST=Mandolin still boots. Change-Id: I85debe4d52399e933768b89b665ff10c9f7779f8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43434 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/amd/common/block/include/amdblocks/acpi.h: Add missing <types.h>Elyes HAOUAS
BIT(x) needs <types.h> Change-Id: I5dc0d45567ae9879a7e12f2ccc48929d2abc9456 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14src: Remove unused 'include <cpu/x86/msr.h>'Elyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/msr.h>' -- src/) <(git grep -l 'IA32_EFER\|EFER_\|TSC_MSR\|IA32_\|FEATURE_CONTROL_LOCK_BIT\|FEATURE_ENABLE_VMX\|SMRR_ENABLE\|CPUID_\|SGX_GLOBAL_ENABLE\|PLATFORM_INFO_SET_TDP\|SMBASE_RO_MSR\|MCG_CTL_P\|MCA_BANKS_MASK\|FAST_STRINGS_ENABLE_BIT\|SPEED_STEP_ENABLE_BIT\|ENERGY_POLICY_\|SMRR_PHYSMASK_\|MCA_STATUS_\|VMX_BASIC_HI_DUAL_MONITOR\|MC0_ADDR\|MC0_MISC\|MC0_CTL_MASK\|msr_struct\|msrinit_struct\|soc_msr_read\|soc_msr_write\|rdmsr\|wrmsr\|mca_valid\|mca_over\|mca_uc\|mca_en\|mca_miscv\|mca_addrv\|mca_pcc\|mca_idv\|mca_cecc\|mca_uecc\|mca_defd\|mca_poison\|mca_sublink\|mca_err_code\|mca_err_extcode\|MCA_ERRCODE_\|MCA_BANK_\|MCA_ERRTYPE_\|mca_err_type\|msr_set_bit\|msr_t\|msrinit_t' -- src/) |grep '<' Change-Id: I45a41e77e5269969280e9f95cfc0effe7f117a40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41969 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-13soc/amd/picasso: supply SMBIOS type 17Rob Barnes
Extract DRAM info from AMD_FSP_DMI_HOB and store it as mem_info in cbmem with id CBMEM_ID_MEMINFO. Subsquently extract mem_info objects from cbmem to build SMBIOS type 17 tables. BUG=b:148277751,b:160947978 TEST=dmidecode -t 17 BRANCH=none Change-Id: Iacedbb017d19516674070f89ba0aa217f55383e3 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-11arch/x86: Drop CBMEM_TOP_BACKUPKyösti Mälkki
Code has evolved such that there seems to be little use for global definition of cbmem_top_chipset(). Even for AMD we had three different implementations. Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10soc/amd/picasso: Add support for DRIVERS_USB_PCI_XHCIRaul E Rangel
This provides the functionality to provide the GPE to the pci_xhci driver. BUG=b:154756391, b:160651028 TEST=Dump ACPI tables and verify GPE is set. Also dump SMI regs and verify GPE is set. Resume using a USB keyboard. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ice7203831a1f65ed32f3a6392fe02c4b17d42617 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-10soc/amd/picasso: Delete partially implemented usb implementationRaul E Rangel
There is now a generic xhci driver we can use to generate the xHCI ACPI nodes. BUG=b:154756391 TEST=Boot trembyle and look at ACPI table Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3e9973dd416ccd51971f4d9410bed991eb7c3c41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41901 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10soc/amd/picasso: Add missing include to smi.hRaul E Rangel
BUG=b:154756391 TEST=Don't see build failure. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I36b81643c29ec1e7978d521206fbc366060ab286 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43330 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10soc/amd/picasso: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing a pointer that might be "NULL" when calling acpigen_write_scope. Add sanity check for scope to prevent NULL pointer dereference. Found-by: Coverity CID 1429980 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I6214fb83bccb19fe4edad65ce6b862815b8dcec6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42837 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-10soc/amd/picasso: Add PCI driver for data fabric devicesFurquan Shaikh
Data fabric devices are PCI devices which support PCI configuration space but do not require any MMIO/IO resources. This change adds a PCI driver for the data fabric devices which only provides device operations for adding node to SSDT and returning the ACPI name for the device. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3da9287db5febf1a1d7eb1dfbed9f1348f80a588 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-10soc/amd/picasso: Add driver for handling PCIE GPP bridgesFurquan Shaikh
This change adds a driver pcie_gpp.c which provides device_operations for external and internal PCIe GPP bridges. These device operations include standard PCI bridge operations as well as operations for generating ACPI node for the device and returning appropriate ACPI name for it. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I9f8809c2735bdc09435deda91a570c89e71e8062 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-10soc/amd/picasso: Map AOAC registers to enable i2c after S3Martin Roth
When entering S3, zork shuts down the i2c controllers to save power. On resume, we need to re-enable i2c before accessing them, so we need to map the AOAC registers in verstage. BUG=b:160834101 TEST=psp_verstage works after resume. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ia8aa4923898a50f2202b6ca8434cee61a5918e91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43333 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09include/cpu/amd/msr: move SMM_LOCK bit right after HWCR_MSR definitionFelix Held
The SMM_LOCK bit isn't in SMM_MASK_MSR, but in HWCR_MSR, so move it there. The soc/amd/* code itself uses the bit definition when accessing HWCR_MSR, so SMM_LOCK was just below the wrong MSR definition. Also remove SMM_LOCK from comment about masking bits in SMM_MASK_MSR, since that bit isn't in that MSR. TEST=Checked the code and the corresponding BKDG/PPR. Change-Id: I2df446f5a9e11e1e7c8d10256f3c2803b18f9088 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43309 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09soc/amd/picasso: Always load and run display opromRob Barnes
The kernel requires the display oprom is loaded and ran in order for the kernel to not panic. Therefore, select the correct settings such that normal mode works for Chrome OS. BUG=b:160560510 TEST=Boot Trembyle in developer mode and normal mode Change-Id: Ia6bcc99f8880a45818f959a957660c2c43b1bfdf Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-09soc/amd/picasso: Remove I2C4Edward Hill
Remove I2C4 since it is a slave device used for USB-C mux control and should not be included with the other master devices. BUG=b:160624619 b:160292546 TEST=EC can communicate with AP mux I2C4 slave Change-Id: Idaad618e90d6264d881dc66628cf581a856c231d Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43263 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-09soc/amd/picasso: Add dummy spinlock for psp_verstageMartin Roth
If CONFIG_CMOS_POST is enabled, psp_verstage breaks because the spinlock code is missing. Add dummy spinlock code as the spinlocks aren't needed in the PSP. TEST=Build with CONFIG_CMOS_POST enabled. BUG=None Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iea6f31e500e1b26f0b974c6eaa486209b9c81459 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43310 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08soc/amd/picasso: Update APOB size & base generationMartin Roth
Make the APOB size & base generation the same as all the other command line arguments to amdfwtool. BUG=None TEST=Build & boot trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Id78383d87bc98dd2c859c75585266411c226f950 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08arch/x86: Add memmove.c to x86 bootblockMartin Roth
This was specifically needed for vboot with psp_verstage, but adding it to always be built into bootblock if needed like memcpy & memset makes sense. TEST=Build & boot trembyle BUG=None Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ib724aaf1492edf053a593b42107684b7bf896592 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08src/amd/common: Exclude biosram from psp_verstageMartin Roth
This isn't needed for psp_verstage, and causes build failures if included. BUG=b:158124527 TEST=Build & boot Trembyle with psp_verstage Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I63942ad896d205c327d65bb8083da817b972962b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42808 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08soc/amd/picasso: Halt if workbuf is absent after psp_verstageMartin Roth
Check for the workbuf in bootblock if psp_verstage is being used. BUG=b:158124527 TEST=Build & boot Trembyle with psp_verstage Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I0ec8d2c953bce4c44cde5102d2765e0ab9b5875e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42810 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08soc/amd/common: Don't init SMIs or SCIs in psp_verstageMartin Roth
We can't set the SMI or SCI flags in psp verstage, so skip them. TEST=Build BUG=b:154142138 Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I40eb464cde6b233607de1e177702c643ea2b4bb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42765 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08soc/amd/picasso: Update the AMD firmware in RW-A & RW-B regionsMartin Roth
The AMD firmware package created by amdfwtool contains pointers to the various binaries and settings. When these are moved to the RW-A & RW-B regions, the packages need to be recreated for the new addresses. TEST=Build & boot trembyle. See that we're booting from the correct region. BUG=b:158124527 Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I0d50968b6ab4b3ab51f8c9bc66c56e141ef728ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/42225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08soc/amd/picasso:Add psp_verstage components to amdfw binaryMartin Roth
This adds the psp_verstage userspace application and the location of the shared memory area to the amdfw binary tables. BUG=b:158124527 TEST=Build & boot psp_verstage on trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I45309b5998e6e442ff37cf1d2adb8ccfa1b6a619 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
2020-07-08soc/amd/picasso: add psp_verstageMartin Roth
This is the main code for building coreboot's verstage as a userspace application to run on the PSP. It does a minimal setup of hardware, then runs verstage_main. It uses hardware hashing to increase the speed and will directly reboot into recovery mode if there are any failures. BUG=b:158124527 TEST=Build & boot trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia58839caa5bfbae0408702ee8d02ef482f2861c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08soc/amd/picasso: Allow modification of i2c base addresses in PSPMartin Roth
BUG=b:158124527 TEST=Build & boot psp_verstage on trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I45380e0c61e1bb7a94a96630e5867b7ffca0909c Reviewed-on: https://review.coreboot.org/c/coreboot/+/42064 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/zork: Add USB2 phy tuning parameter for SI tuningChris Wang
Add the USB2 phy tuning parameter to adjust the USB 2.0 PHY driving strength. BUG=b:156315391 TEST=Build, verified the tuning value been applied on Trembyle. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I3d31792d26729e0acb044282c5300886663dde51 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2208524 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Tested-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06soc/amd/common: Fix missing gpio_banks.h includeKyösti Mälkki
Change-Id: I2c92280f3bbd80bd7a0d3abfb2fddcef997e144e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06soc/amd/picasso/memlayout: Verify bootblock is 16-bit alignedRaul E Rangel
The bootblock must be 16-bit aligned for it to boot. BUG=b:159081993 TEST=Made sure trembyle still compiles. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I29c244a3f08df46c5992fe81683b9c0d740ff248 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06soc/amd/picasso: Use PSP Sx command only for S3Marshall Dawson
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The PSP only acts on S3 and ignores all others. As a result, the command register is not cleared upon return and coreboot reports a timeout. BUG=b:153622879 TEST=Use halt from command line, verify command skipped. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-03soc/amd/common: fix eSPI virtual wire polarity encodingAaron Durbin
eSPI interrupts are active level high. The eSPI polarity register in the chipset inverts incoming signals if the corresonding bit is 0 in the register. Therefore, all active high (edge or level) virtual wire interrupts need to ensure they are not inverted. And really the sender of the interrupts should be conforming to the the eSPI spec. As such inverting any signals should not be necessary, but this register in the chipset allows for fixing up those misbehaviors. BUG=b:157984427 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-02soc/amd/picasso: Add support for generating I2S machine deviceFurquan Shaikh
This change adds support in ACP device driver to generate I2S machine device (AMDI5682) in SSDT. It expects mainboard to provide chip config `dmic_select_gpio` that can be passed as `dmic-gpios` in _DSD for the device. BUG=b:157603026 TEST=Verified that I2S machine device is correctly generated for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I22ab53d7d68c6e042e467e598d688e360d28586f Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252557 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-02soc/amd/picasso: Add .acpi_name and .acpi_fill_ssdt_generator for ACP deviceFurquan Shaikh
This change adds support for .acpi_name and .acpi_fill_ssdt_generator device operations for the ACP device. BUG=b:157603026 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I84bb8150dada99def85b685535706aa609de227f Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252556 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-02soc/amd/common: fix SPI bar resource usageAaron Durbin
The ACPI code was not masking off the correct bits for publishing the SPI bar to the OS. It resulted in a dmesg messagelike: system 00:00: [mem 0xfec10002-0xfec11001] has been reserved And /proc/iomem entry fec10002-fec11001 : pnp 00:00 These addresses are wrong because they are including bits of a register that are not a part of the address. Moreover, the code does not publish the eSPI register area either. The eSPI registers live at 0x10000 added to the SPI bar. Lastly, both regions are less than a page so only report a page of usage for each. Stoney Ridge's SPI bar register defines the address as 31:6 while Picasso's SPI bar register defines the address as 31:8. Use Picasso's valid mask for both cases because no one is assigning addresses that are aligned to less than 256 bytes. With the fixes, dmesg reports: system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved system 00:00: [mem 0xfec20000-0xfec20fff] has been reserved And /proc/iomem indicates: fec10000-fec10fff : pnp 00:00 fec20000-fec20fff : pnp 00:00 BUG=b:160290629 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I130b5ad26d9e13b44c25fbb35a05389f9e8841ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/42959 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Clear interrupt and wake status when configuring padsFurquan Shaikh
This change clears interrupt and wake status for a pad when configuring it. This ensures that stale interrupts/wake notifications are flushed out and do not cause spurious wakes in future suspends. BUG=b:159944426 Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Add new helper macro PAD_CFG_STRUCT_FLAGSFurquan Shaikh
`flags` field of soc_amd_gpio structure is set only for SCI and SMI configurations. This change adds a new helper macro PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members including `flags` field. This can be used directly by PAD_SCI and PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of redundant parameter 0 for flags for all other pad configurations. BUG=b:159944426 Change-Id: I835b62f5502375ffc4215548b51338a67546d699 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/gpio, mb/{amd,google}: Configure pads using a single entry in GPIO ↵Furquan Shaikh
configuration table Currently, for Stoneyridge and Picasso mainboards, pads that are configured for SCI/SMI/WAKE need to have multiple entries in the configuration table - one for PAD_GPI and other for the special configuration that is required. This requires a very specific ordering of pads within the table and is prone to errors because of conflicting params provided to the different entries for the same pad. This also does not work very well with the concept of override GPIOs where the entry in base table is overridden with the first matched entry from the override table. This change updates the way GPIO configuration is handled for special routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of soc_amd_gpio structure in the macros performing these configurations. Also, program_gpios() is updated to perform a write to GPIO control register instead of read-modify-write. This is because mainboard is expected to provide only a single configuration entry for each pad within a given table. Thus, there is no need to preserve earlier configuration. Mainboards that were providing multiple entries for a single pad are updated accordingly. BUG=b:159944426 Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Use gpio_setbits32()Furquan Shaikh
Some codepaths want to set selected bits of a hardware register to match those of a given variable in memory. Provide a helper function for this purpose and use it in gpio_set(), gpio_input_pulldown() and gpio_input_pullup(). This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to include all bits dealing with pull and output respectively. Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30soc/amd/common/gpio: Add macros for setting fields of soc_amd_gpioFurquan Shaikh
This change adds helper macro PAD_CFG_STRUCT for setting the fields of `soc_amd_gpio`. Additionally, macros are added for different operations i.e. pull, output, trigger, int_enable, event_trigger, wake_enable, debounce, etc. All GPIO configuration macros are updated to use PAD_CFG_STRUCT instead of setting the fields directly. BUG=b:159944426 Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/lpc: Skip SERIRQ setup when using eSPIMarshall Dawson
BUG=b:157984427 TEST=check value of PMx054 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I2ca14c137ed784a1a7cfeed969719f46fc8230f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-30soc/amd/common/gpio: Rename GPIO debounce macrosFurquan Shaikh
This change updates the macros for GPIO debounce to add _DEB_ in the name. This is done to make the names consistent with rest of the GPIO control field names. BUG=b:159944426 Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Update the macros for interrupt and pad filteringFurquan Shaikh
This change renames GPIO macros as follows: 1. Pad filtering macros are renamed to GPIO_TRIGGER_ and GPIO_ACTIVE_. This determines the filtering applied on the input signal at the pad. 2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_. _INT_ is dropped from pad filtering macros because the filtering applies to the input signal irrespective of how it is routed. It is applied at the pad not only for GPIO interrupts but also for other routes i.e. SCI, SMI, etc. BUG=b:159944426 Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Make macro names for GPIO flags consistentFurquan Shaikh
`soc_amd_gpio` structure uses a flag field to store additional information about GPIO configuration that does not end up directly in the GPIO control register. However, the naming for these flags is not consistent across event triggers and special configurations. This change updates the flag names to be consistent (starting with GPIO_FLAG_*) and adds some helper functions for GPIO events. In the following CLs, more changes will be made to drop some of the special flags which are not really required. BUG=b:159944426 Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Drop unused macro GPIO_TRIGGER_INVALIDFurquan Shaikh
This change drops unused macro GPIO_TRIGGER_VALID from gpio_banks.h. BUG=b:159944426 Change-Id: Ie115f37893d9ba190bab56cf8b037febd8b5f4b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/amd/picasso: add NULL-pointer check to root_complex_fill_ssdtFelix Held
Found-by: Coverity CID 1429980 Change-Id: Ia72b9dbe029a5da98e408a9cf16fa4a93b10917a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-29soc/amd/picasso/soc_util: add comment on the silicon and soc typesFelix Held
Change-Id: I71704ab292edf8bd343370e6b72c47a8f3aceffd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-29soc/amd/common: Refactor GPIO SCI/SMI interruptsKyösti Mälkki
Change-Id: Ib2c7cd70ab38d0d8e745b0a611b780d2b0b8dc5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-29soc/amd/common: Refactor GPIO_MASTER_SWITCH interrupt enableKyösti Mälkki
There is no GPIO_63 but the register position is used for interrupt controls. Change-Id: I754a2f6bbee12d637f8c99a9d330ab0ac8187247 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42686 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/amd/common: Drop ACPIMMIO GPIO bank separationKyösti Mälkki
The banks are one after each other in the ACPIMMIO space. Also there is space for more banks and existing ASL takes advantage of the property. Change-Id: Ib78559a60b5c20d53a60e1726ee2aad1f38f78ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42522 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28soc/amd/common: Allow runtime mapping of ACPIMMIO banksKyösti Mälkki
Future implementation of verstage running on PSP will have access to some of the ACPIMMIO banks, but banks will be mapped runtime at non-deterministic addresses. Provide preprocessor helpers to accomplish this. Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2020-06-28soc/amd/common: Access ACPIMMIO via proper symbolsKyösti Mälkki
Using proper symbols for base addresses, it is possible to only define the symbols for base addresses implemented for the specific platform and executing stage. Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28soc/amd/picasso/soc_util: rework reduced I/O chip detectionFelix Held
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort connectivity. While Dali can either be fused-down PCO or RV2 silicon, Pollock is always RV2 silicon. Since we have all boards using this code in tree right now, soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku(). Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25Revert "soc/amd/common/block/acpimmio: Update acpimmio for psp_verstage"Kyösti Mälkki
This reverts commit 4883252912665f56c8e7801fe03a26594a1e9d5d. Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as it does not have the same view of memory space. The prototypes xx_set/get_bar() are only valid for PSP as x86 cores will use the constant mapping defined in <amdblocks/acpimmio_map.h> The selected MMIO base address model depends of the architecture the stage is built for and, to current knowledge, nothing else. So the guards should have been with ENV_X86 vs ENV_ARM and not about CONFIG(VERSTAGE_BEFORE_BOOTBLOCK). For the ENV_ARM stage builds, <arch/io.h> file referenced in the previously added mmio_util_psp.c file has not been added to the tree. So there was some out-of-order submitting, which did not get caught as the build-testing of mixed-arch stages has not been incorporated into the tree yet. The previously added file mmio_util_psp.c is also 90% redundant with mmio_util.c. Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24soc/amd/picasso: fix host bridge bus numbersAaron Durbin
The host bridge's resources covering bus numbers assumed 256 buses were being decoded. However, MMCONFIG was only covering 64 buses. This results in Linux complaining: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge When retrieving the host bridge's resources fix up the bus numbers to utilize MMCONF_BUS_NUMBER Kconfig. I couldn't keep IASL from complaining when trying to do this statically. BUG=b:158874061 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ief1901743e2c99f583ef0181490d493d23734f64 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-24soc/amd/picasso: Add UPD xhci0_force_gen1Chris Wang
Adding xhci0_force_gen1 UPD to force USB3 port to gen1. BUG=b:156314787 BRANCH=trembyle-bringup TEST=Build. Cq-Depend: chrome-internal:3013435 Change-Id: Iff3746e248625c253776c3bc3946d123b0635ffe Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2217662 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42216 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24src: Report byte-sized access for GPE0Angel Pons
According to the ACPI specification, version 6.3: OSPM accesses GPE registers through byte accesses (regardless of their length). So, reporting dword-sized access is wrong and means nothing anyway. Tested on Asus P8Z77-V LX2, Windows 10 still boots. Change-Id: I965131a28f1a385d065c95f286549665c3f9693e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42671 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24soc/amd/stoneyridge: Correct ACPI CPU string prefixMatt DeVillier
Commit 9550e97 [acpi: correct the processor devices scope] changed the default CPU scope from _PR to _SB, but the default prefix in Stoneyridge's Kconfig was missed, leading to ACPI errors for 'AE_NOT_FOUND for object \_PR.P00n.' Fix the default prefix and eliminate the errors reported in dmesg. Test: boot Linux w/5.3 kernel on google/liara, check for errors Change-Id: I5611b6836062a0a9f90036d7fe40cd98bd730af3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-24ACPI: Replace smm_setup_structures()Kyösti Mälkki
Except for whitespace and varying casts the codes were the same when implemented. Platforms that did not implement this are tagged with ACPI_NO_SMI_GNVS. Change-Id: I31ec85ebce03d0d472403806969f863e4ca03b6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-24ACPI: Replace uses of CBMEM_ID_ACPI_GNVSKyösti Mälkki
These are the simple cbmem_find() cases. Also drop the redundant error messages. Change-Id: I78e5445eb09c322ff94fe4f65345eb2997bd10ef Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-23src/*: Update makefiles to exclude x86 code from psp-verstageMartin Roth
The assumption up to this point was that if the system had an x86 processor, verstage would be running on the x86 processor. With running verstage on the PSP, that assumption no longer holds true, so exclude pieces of code that cause problems for verstage on the PSP. This change will add these files to verstage only if the verstage architecture is X86 - either 32 or 64 bit. BUG=b:158124527 TEST=Build and boot on Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I797b67394825172bd44ad1ee693a0c509289486b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22soc/amd/picasso: Set BERT_SIZE to 0 when no table generatedMarshall Dawson
BUG=b:136987699 TEST=Verify no region reserved when CONFIG_ACPI_BERT=n Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I95d511e454e7f2998e46e14112eea5e8b09d59b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-22soc/amd/picasso: Convert BERT reserved region from cbmemMarshall Dawson
Picasso's BERT region should not have been moved to cbmem in commit 901cb9c "soc/amd/picasso: Move BERT region to cbmem". This causes an error of "APEI: Can not request [] for APEI BERT registers. FSP has been modified to set aside a requested region size for BERT, simiar to TSEG. Remove the cbmem reservation and locate the region by searching for the HOB. BUG=b:136987699 TEST=Check that BERT is allocated Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I20e99390141986913dd45c2074aa184e992c8ebb Reviewed-on: https://review.coreboot.org/c/coreboot/+/42530 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22amd/picasso/acpi: Add power resources for I2C and UARTRaul E Rangel
This allows the kernel to runtime suspend these devices and properly shut them down. If a tty is not used, the kernel will disable the device. I omitted UART0 because the PSP will not power the controller before accessing it. This causes PSP boot failures. See b/158772504. We also can't enable UART0 D3 until we stop using the mmio kernel command line `console=uart,mmio32,0xfedc9000`. The kernel will suspend the UART controller before it notices that the mmio address matches ttyS0. This causes the kernel to fail writing to the UART. So we need to move over to `console=ttyS0`. BUG=b:153001807, b:157617092, b:157858890, b:158772504 TEST=Boot trembyle and see I2C devices entering and exiting D3. * See the UART devices entering D3 * Made sure the i2c peripherals were still functional. * Ran suspend stress test for 40+ iterations. [ 0.349094] power-0362 __acpi_power_on : Power resource [FUR1] turned on [ 0.350627] power-0362 __acpi_power_on : Power resource [FUR2] turned on [ 0.352094] power-0362 __acpi_power_on : Power resource [FUR3] turned on [ 0.353626] power-0362 __acpi_power_on : Power resource [I2C2] turned on [ 0.376980] power-0362 __acpi_power_on : Power resource [PRIC] turned on [ 0.399997] power-0362 __acpi_power_on : Power resource [PRIC] turned on [ 0.401953] power-0362 __acpi_power_on : Power resource [I2C3] turned on [ 0.403460] power-0362 __acpi_power_on : Power resource [I2C4] turned on [ 0.483646] power-0418 __acpi_power_off : Power resource [I2C4] turned off [ 1.028404] power-0418 __acpi_power_off : Power resource [I2C3] turned off [ 1.448426] power-0418 __acpi_power_off : Power resource [I2C2] turned off [ 5.308094] power-0418 __acpi_power_off : Power resource [FUR1] turned off [ 5.340833] power-0418 __acpi_power_off : Power resource [FUR2] turned off [ 5.382041] power-0418 __acpi_power_off : Power resource [FUR3] turned off [ 5.423861] power-0362 __acpi_power_on : Power resource [I2C3] turned on [ 6.698225] power-0362 __acpi_power_on : Power resource [I2C2] turned on [ 6.856573] power-0418 __acpi_power_off : Power resource [I2C3] turned off [ 8.246970] power-0418 __acpi_power_off : Power resource [I2C2] turned off Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I04c4a729d4cb9772ab78586fdbb695b450cc1600 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-22soc/amd/picasso: don't increment boot count twiceAaron Durbin
The FSP-M path increments the boot count already. Therefore, remove the double increment. BUG=b:159359278 Change-Id: I96cabce58d7114f708cad157600f0ccd3aa8a536 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42546 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22soc/amd/picasso: Enable IDT in all stagesFurquan Shaikh
This change selects IDT_IN_EVERY_STAGE so that the interrupt handlers are provided for all stages. Change-Id: I25ced7758264fb14998ab5f31ff778c1af11eb05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-22cpu/x86/lapic: Support x86_64 and clean up codePatrick Rudolph
Most LAPIC registers are 32bit, and thus the use of long is valid on x86_32, however it doesn't work on x86_64. * Don't use long as it is 64bit on x86_64, which breaks interrupts in QEMU and thus SeaBIOS wouldn't time out the boot menu * Get rid of unused defines * Get rid of unused atomic xchg code Tested on QEMU Q35 with x86_64 enabled: Interrupts work again. Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working. Tested on Lenovo T410 with x86_64 enabled. Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22soc/amd/picasso/bootblock: Clear BSS sectionRaul E Rangel
We are currently relying on the assumption that the amdcompress tool will zero out the bss section. Instead of relying on this assumption, lets explicitly clear it. The implementation was copied from assembly_entry.S. BUG=b:147042464 TEST=Cold boot trembyle and also s3 resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifb4f4cc6932dd4c3c92d4e7647569f9a0c69ea4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/42475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-22soc/amd/picasso/bootblock: Write EIP to secure S3Raul E Rangel
This change is required so we have a defined entry point on S3. Without this, the S3_RESUME_EIP_MSR register could in theory be written to later which would be a security risk. BUG=b:147042464 TEST=Resume trembyle and see bootblock start. coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 smm starting (log level: 8)... SMI# #6 SMI#: SLP = 0x0c01 Chrome EC: Set SMI mask to 0x0000000000000000 Chrome EC: Set SCI mask to 0x0000000000000000 Clearing pending EC events. Error code EC_RES_UNAVAILABLE(9) is expected. EC returned error result code 9 SMI#: Entering S3 (Suspend-To-RAM) PSP: Prepare to enter sleep state 3... OK SMU: Put system into S3/S4/S5 Timestamp - start of bootblock: 18446744070740509170 coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 bootblock starting (log level: 8)... Family_Model: 00810f81 PMxC0 STATUS: 0x200800 SleepReset BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) Timestamp - end of bootblock: 18446744070804450274 VBOOT: Loading verstage. FMAP: area COREBOOT found @ c75000 (3715072 bytes) CBFS: Locating 'fallback/verstage' CBFS: Found @ offset 61b80 size cee4 PROG_RUN: Setting MTRR to cache stage. base: 0x04000000, size: 0x00010000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4b0b0d0d576fc42b1628a4547a5c9a10bcbe9d37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-06-19soc/amd: move acpi_wake_source.asl to common directoryFelix Held
Files are both identical and common for both SoCs. Change-Id: I54b78108d342a0fd03bf70ffe6a09695c5678eb4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19soc/amd/picasso/uart: factor out console-related functionsFelix Held
Move uart_platform_base and uart_platform_refclk to their own compilation unit to avoid preprocessor usage. The newly created compilation unit is only added to the build when PICASSO_CONSOLE_UART is selected. Change-Id: I56911addc8c000a0772156e5166720867cdd26fe Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42517 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18soc/amd/picasso/i2c: use config_of_soc()Felix Held
Change-Id: I2ebe072a5c887b16d2a39f029069bc8674f8eaea Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-18soc/amd/picasso/acp: use config_of_soc()Felix Held
Change-Id: I815b013438d66eef6605dba7cfbd96b9a4aff9b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-18soc/amd/picasso: Add ability to enable/disable UART to device treeRaul E Rangel
If we are not using the UARTs or they don't have the correct GPIOs configured we should let the mainboard disable them. BUG=b:153001807 TEST=Dump SSDT and see UART device is disabled Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-06-18soc/amd/picasso: remove AMDFW_OUTSIDE_CBFS optionFelix Held
The option to have amdfw outside of CBFS used dd to write amdfw at a given location overwriting anything that was there before, which may cause the build to fail due to the FMAP header being overwritten resulting in a not too obvious error that the image is a legacy image without FMAP header. Mandolin was the only board using this functionality, but I fixed the placement of components in the flash image there, so that amdfw can just be placed in CBFS avoiding those problems. Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17Revert "soc/amd/picasso: Reconfigure SPI speeds after FSP-S has run"Furquan Shaikh
This reverts commit d5f1e0f9734273f79ebd313bb6a17eda04c22c11. Reason for revert: FSP-S is now fixed to not touch the SPI configuration registers. Thus, coreboot does not need to reconfigure SPI after FSP-S has run. BUG=b:153506142 TEST=Verified that SPI configuration registers look the same before and after FSP-S has run. em100 works fine without any additional changes in coreboot to reconfigure SPI. Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-17soc/amd/picasso: rename PICASSO_UART Kconfig optionFelix Held
The PICASSO_UART Kconfig option is about using the internal MMIO UART controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-17soc/amd/picasso: fix build if PICASSO_UART is unsetFurquan Shaikh
This change includes uart.c in bootblock, romstage, ramstage and verstage unconditionally because this file is handling more than just the UART console configuration. This allows boards to take advantage of picasso_uart_mmio_ops even if PICASSO_UART is not selected. uart_platform_base and uart_platform_refclk mustn't be provided if PICASSO_UART is unset, so add an #if around those functions. BUG=b:158346697 TEST=Mandolin builds again. Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16soc/amd/picasso/include/soc/memmap.c: Add missing <stdint.h>Elyes HAOUAS
include <stdint.h> for 'uint32_t'. Change-Id: I8768b7f0692ed703a060dc0406b517dc001cc25d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:43:21 +0000